Skip header and navigation

2 records – page 1 of 1.

Date Range From
1910
Date Range To
1920
Material Type
Artifact
Materials
CHROMED METAL, STEEL
Catalogue Number
P19739467000
Material Type
Artifact
Date Range From
1910
Date Range To
1920
Materials
CHROMED METAL, STEEL
No. Pieces
3
Height
33.0
Diameter
16.2
Description
CAPACITY APPROXIMATELY ONE GALLON. SWINGING HANDLE, DETACHABLE SPOUT (SCREW BASE), AND A SLIP ON SPOUT CAP ATTACHED TO HANDLE WITH A CHAIN. "1" PAINTED ON CAN SIDE, IN TWO DIFFERENT LOCATIONS. CAN EXHIBITS WORN CHROME PLATING SEVERAL SHALLOW DENTS, AND A LEAKING BASE SEAM. A SPOT WELD REPAIR IS ON THE BASE SEAM. CAN USED TO OIL THE SEALS ON A STEAM PUMPER.
Subjects
METALWORKING T&E
Historical Association
SAFETY SERVICES
History
CARRIED ON LETHBRIDGE FIRE DEPARTMENT STEAM PUMP TRUCK #1, AN AMERICAN-LA FRANCE TYPE 12. REF TO P19739463000-GA. PUMP TRUCK NO. 1.
Catalogue Number
P19739467000
Acquisition Date
1973-11
Collection
Museum
Less detail
Date Range From
1970
Date Range To
2015
Material Type
Artifact
Materials
METAL, RUBBER
Catalogue Number
P20150010002
  1 image  
Material Type
Artifact
Date Range From
1970
Date Range To
2015
Materials
METAL, RUBBER
No. Pieces
1
Height
5.6
Length
105.5
Width
27.0
Diameter
4.5
Description
LARGE METAL AND RUBBER BOLT CUTTERS. HANDLE GRIPS ARE 11.2CM LONG PIECES OF BLACK RUBBER. HANDLES ARE A MEDIUM RED, WITH A GREEN STRIPE NEAR THE BLADE ADJUSTMENT BOLTS. WRITTEN IN BLACK MARKER JUST BELOW ONE OF THE STRIPES OF GREEN: "P 4". EMBOSSED JUST ABOVE THIS MARKING IS "U.S. PAT. NO. 2910900". ON THE OPPOSITE SIDE OF THE HANDLE FROM THE "P 4" MARKING IS WHAT REMAINS OF A RECTANGULAR SILVER STICKER. ABOVE THIS STICKER, EMBOSSED IN AN OVAL: "HKP". ON THE OTHER HANDLE, ON THE SAME SIDE OF THE CUTTERS AS THE "HKP" IS EMBOSSED: "TOOL NO. 0590M". THE JAWS OF THE BOLT CUTTERS ARE BLACK AND BOTH SIDES OF THE JAWS ARE EMBOSSED WITH: 2 "HKP" IN AN OVAL AND 2 "NO. 5". STAMPED ON EACH SIDE OF THE JAWS, ONCE PER SIDE, IS "HC - CUTS HARD CHAIN 1/2 CAP". JUST BETWEEN THE JAWS AND BLADES, STAMPED INTO THE METAL, ON THE SAME SIDE AS THE "P 4" MARKING: "MADE BY H.K. PORTER INC. BOSTON, MASS 02143". ONE OF THE BOLTS NEAR THE BLADE, ON THE SILVER STICKER SIDE, IS STAMPED WITH "535X". EMBOSSED ON BOTH SIDES OF THE BLADE, NEAR THE TIP, "U.S. PAT." AND "PEND". OVERALL IN FAIR TO GOOD CONDITION. THE RED FINISH ON THE HANDLES HAS FLAKED OFF AND THERE ARE SECTIONS WHERE THE FINISH IS LOOSE. THE RUBBER HAND GRIPS ARE SCUFFED AND SCRATCHED ALL OVER. SOME RUST ON THE JAWS AND BLADE AREA.
Subjects
METALWORKING T&E
Historical Association
SAFETY SERVICES
History
THESE BOLT CUTTERS WERE USED BY THE LETHBRIDGE FIRE DEPARTMENT. IN A WRITTEN STATEMENT PROVIDED AT THE TIME OF DONATION, JESSE KURTZ, DEPUTY CHIEF – SUPPORT SERVICES (RETIRED), EXPLAINED THAT THEY WOULD BE “USED AT EMERGENCY SCENES TO CUT CHAINS OR PADLOCKS OFF DOORS OR FENCES TO GAIN ACCESS. SIMILAR, BUT LIGHTER [BOLT CUTTERS ARE] STILL USED TODAY.” IN THE SUMMER OF 2015, COLLECTIONS TECHNICIAN KEVIN MACLEAN, CONDUCTED A SERIES OF INTERVIEWS WITH CURRENT AND FORMER MEMBERS OF THE FIRE DEPARTMENT, INCLUDING: CLIFF “CHARLIE” BROWN (HIRED IN 1966, RETIRED 2004), TREVOR LAZENBY (HIRED IN 1994), RAYMOND “RAY” PETIT (HIRED 1965, RETIRED 1998), AND LAWRENCE DZUREN (HIRED 1959, RETIRED 1992). BROWN CALLED THEM “OUR FAVOURITE TOOL … THERE WERE A LOT OF PLACES THAT WE WENT, THE GATES WERE LOCKED, JUST HAD A CHAIN WITH A PADLOCK ON IT. YOU WOULDN’T EVEN THINK TWICE. THESE BOLT CUTTERS ARE FOUR FEET LONG AND HAD SUCH A FULCRUM ON IT – YOU’D JUST CUT THE CHAIN AND IN WE’D GO. WE WOULDN’T EVEN ASK PERMISSION IF IT WAS AN EMERGENCY; WE’D JUST CUT THEM AND IN WE’D GO. WE USED THE BOLT CUTTERS LOTS AND LOTS AND LOTS OF TIMES … WE TRIED NOT TO CUT THE PADLOCK IF WE DIDN’T HAVE TO, BECAUSE THE PADLOCK, THEY HAD A KEY FOR IT; BUT THE CHAIN, WE TRIED TO CUT IT BACK FAR ENOUGH THAT IF THEY HAD TO TAKE THE PADLOCK OFF, THEY COULD STILL USE THE CHAIN. WE TRIED NOT TO DO ANY MORE DAMAGE THAN NECESSARY, BECAUSE PEOPLE THAT WERE HAVING PROBLEMS, HAD ENOUGH DAMAGE WITHOUT US WRECKING MORE THAN NECESSARY.” LAZENBY ADDED: “WE ACTUALLY CARRY THREE SIZES OF THESE AND THIS LOOKS LIKE THE LONGEST … THESE ARE IN SERVICE TODAY AND I BELIEVE THESE WILL BE IN SERVICE FOR MANY, MANY YEARS TO COME.” PETIT AGREED, SAYING: “WE USED IT QUITE OFTEN … EVERY TRUCK HAD ONE … I PROBABLY USED IT 10-12 TIMES AT LEAST. AND IT WAS USUALLY IN THE INDUSTRIAL AREA WHERE THEY HAVE IT ALL FENCED.” DZUREN ALSO AGREED, EXPLAINING HOW USEFUL THE BOLT CUTTERS COULD BE: “EVEN INTO BUILDINGS, THAT SOME BUILDINGS HAD LOCKS ON THE OUTSIDE NATURALLY, SO TO GET IN THERE, RATHER THAN CAUSING TOO MUCH DAMAGE, IN THE OTHER WAY THEY WOULD CUT THE LOCK, OR THE CHAIN LINK, AND GET INTO THE ENCLOSURE OR BUILDING THAT WAY.” SEE PERMANENT FILE FOR FULL INTERVIEW TRANSCRIPTS AND ADDITIONAL INFORMATION ABOUT THE LETHBRIDGE FIRE DEPARTMENT.
Catalogue Number
P20150010002
Acquisition Date
2015-02
Collection
Museum
Images
Less detail