Skip header and navigation

2 records – page 1 of 1.

Date Range From
1970
Date Range To
2015
Material Type
Artifact
Materials
METAL, RUBBER
Catalogue Number
P20150010002
  1 image  
Material Type
Artifact
Date Range From
1970
Date Range To
2015
Materials
METAL, RUBBER
No. Pieces
1
Height
5.6
Length
105.5
Width
27.0
Diameter
4.5
Description
LARGE METAL AND RUBBER BOLT CUTTERS. HANDLE GRIPS ARE 11.2CM LONG PIECES OF BLACK RUBBER. HANDLES ARE A MEDIUM RED, WITH A GREEN STRIPE NEAR THE BLADE ADJUSTMENT BOLTS. WRITTEN IN BLACK MARKER JUST BELOW ONE OF THE STRIPES OF GREEN: "P 4". EMBOSSED JUST ABOVE THIS MARKING IS "U.S. PAT. NO. 2910900". ON THE OPPOSITE SIDE OF THE HANDLE FROM THE "P 4" MARKING IS WHAT REMAINS OF A RECTANGULAR SILVER STICKER. ABOVE THIS STICKER, EMBOSSED IN AN OVAL: "HKP". ON THE OTHER HANDLE, ON THE SAME SIDE OF THE CUTTERS AS THE "HKP" IS EMBOSSED: "TOOL NO. 0590M". THE JAWS OF THE BOLT CUTTERS ARE BLACK AND BOTH SIDES OF THE JAWS ARE EMBOSSED WITH: 2 "HKP" IN AN OVAL AND 2 "NO. 5". STAMPED ON EACH SIDE OF THE JAWS, ONCE PER SIDE, IS "HC - CUTS HARD CHAIN 1/2 CAP". JUST BETWEEN THE JAWS AND BLADES, STAMPED INTO THE METAL, ON THE SAME SIDE AS THE "P 4" MARKING: "MADE BY H.K. PORTER INC. BOSTON, MASS 02143". ONE OF THE BOLTS NEAR THE BLADE, ON THE SILVER STICKER SIDE, IS STAMPED WITH "535X". EMBOSSED ON BOTH SIDES OF THE BLADE, NEAR THE TIP, "U.S. PAT." AND "PEND". OVERALL IN FAIR TO GOOD CONDITION. THE RED FINISH ON THE HANDLES HAS FLAKED OFF AND THERE ARE SECTIONS WHERE THE FINISH IS LOOSE. THE RUBBER HAND GRIPS ARE SCUFFED AND SCRATCHED ALL OVER. SOME RUST ON THE JAWS AND BLADE AREA.
Subjects
METALWORKING T&E
Historical Association
SAFETY SERVICES
History
THESE BOLT CUTTERS WERE USED BY THE LETHBRIDGE FIRE DEPARTMENT. IN A WRITTEN STATEMENT PROVIDED AT THE TIME OF DONATION, JESSE KURTZ, DEPUTY CHIEF – SUPPORT SERVICES (RETIRED), EXPLAINED THAT THEY WOULD BE “USED AT EMERGENCY SCENES TO CUT CHAINS OR PADLOCKS OFF DOORS OR FENCES TO GAIN ACCESS. SIMILAR, BUT LIGHTER [BOLT CUTTERS ARE] STILL USED TODAY.” IN THE SUMMER OF 2015, COLLECTIONS TECHNICIAN KEVIN MACLEAN, CONDUCTED A SERIES OF INTERVIEWS WITH CURRENT AND FORMER MEMBERS OF THE FIRE DEPARTMENT, INCLUDING: CLIFF “CHARLIE” BROWN (HIRED IN 1966, RETIRED 2004), TREVOR LAZENBY (HIRED IN 1994), RAYMOND “RAY” PETIT (HIRED 1965, RETIRED 1998), AND LAWRENCE DZUREN (HIRED 1959, RETIRED 1992). BROWN CALLED THEM “OUR FAVOURITE TOOL … THERE WERE A LOT OF PLACES THAT WE WENT, THE GATES WERE LOCKED, JUST HAD A CHAIN WITH A PADLOCK ON IT. YOU WOULDN’T EVEN THINK TWICE. THESE BOLT CUTTERS ARE FOUR FEET LONG AND HAD SUCH A FULCRUM ON IT – YOU’D JUST CUT THE CHAIN AND IN WE’D GO. WE WOULDN’T EVEN ASK PERMISSION IF IT WAS AN EMERGENCY; WE’D JUST CUT THEM AND IN WE’D GO. WE USED THE BOLT CUTTERS LOTS AND LOTS AND LOTS OF TIMES … WE TRIED NOT TO CUT THE PADLOCK IF WE DIDN’T HAVE TO, BECAUSE THE PADLOCK, THEY HAD A KEY FOR IT; BUT THE CHAIN, WE TRIED TO CUT IT BACK FAR ENOUGH THAT IF THEY HAD TO TAKE THE PADLOCK OFF, THEY COULD STILL USE THE CHAIN. WE TRIED NOT TO DO ANY MORE DAMAGE THAN NECESSARY, BECAUSE PEOPLE THAT WERE HAVING PROBLEMS, HAD ENOUGH DAMAGE WITHOUT US WRECKING MORE THAN NECESSARY.” LAZENBY ADDED: “WE ACTUALLY CARRY THREE SIZES OF THESE AND THIS LOOKS LIKE THE LONGEST … THESE ARE IN SERVICE TODAY AND I BELIEVE THESE WILL BE IN SERVICE FOR MANY, MANY YEARS TO COME.” PETIT AGREED, SAYING: “WE USED IT QUITE OFTEN … EVERY TRUCK HAD ONE … I PROBABLY USED IT 10-12 TIMES AT LEAST. AND IT WAS USUALLY IN THE INDUSTRIAL AREA WHERE THEY HAVE IT ALL FENCED.” DZUREN ALSO AGREED, EXPLAINING HOW USEFUL THE BOLT CUTTERS COULD BE: “EVEN INTO BUILDINGS, THAT SOME BUILDINGS HAD LOCKS ON THE OUTSIDE NATURALLY, SO TO GET IN THERE, RATHER THAN CAUSING TOO MUCH DAMAGE, IN THE OTHER WAY THEY WOULD CUT THE LOCK, OR THE CHAIN LINK, AND GET INTO THE ENCLOSURE OR BUILDING THAT WAY.” SEE PERMANENT FILE FOR FULL INTERVIEW TRANSCRIPTS AND ADDITIONAL INFORMATION ABOUT THE LETHBRIDGE FIRE DEPARTMENT.
Catalogue Number
P20150010002
Acquisition Date
2015-02
Collection
Museum
Images
Less detail
Other Name
OFFICE DESK
Date Range From
1910
Date Range To
1997
Material Type
Artifact
Materials
OAK, NEWSPAPER, MOTHER-OF-PEARL
Catalogue Number
P20110027000
  1 image  
Material Type
Artifact
Other Name
OFFICE DESK
Date Range From
1910
Date Range To
1997
Materials
OAK, NEWSPAPER, MOTHER-OF-PEARL
No. Pieces
1
Height
76.4
Length
167.8
Width
86.4
Description
DESK, OAK WITH MOTHER-OF-PEARL CALL BUTTONS ON TOP FRONT RIGHT CORNER. TOP SURFACE HAS: WORN FINISH, AREA OF DARK BLACK STAINING NEAR FRONT CENTER, AND WATER DAMAGE CAUSING WOOD TO SPLIT AT THREE PLACES ON RIGHT SIDE. SEVEN DRAWERS, WITH THREE ON LEFT, THREE ON RIGHT AND ONE AT CENTER. DRAWER FACES HAVE BEVELED EDGES AND WOODEN HANDLES. BOTTOM TWO DRAWERS ON RIGHT, BOTTOM DRAWER ON LEFT AND CENTER DRAWER HANDLES HAVE CHUNKS OF WOOD MISSING. LEFT SIDE OF CENTER DRAWER HAS WHITE PAINT. LOCKING MECHANISMS AT TOP RIGHT, CENTER AND LEFT DRAWERS. ABOVE DRAWERS AT LEFT AND RIGHT ARE PULL OUT BOARDS. SIDES AND REVERSE OF DESK HAVE PANELED WOOD. RIGHT SIDE HAS FRAGMENT OF CORD EXTENDING FROM THE EDGE OF CALL BUTTONS. TOP DRAWER ON RIGHT HAS THREE LOOSE WOODEN SEPARATORS, ONE IN RIGHT MIDDLE AND ONE IN LEFT MIDDLE. SPILLED INK HAS STAINED THE BOTTOM OF TOP LEFT DRAWER INSIDE. FRAGMENT OF NEWSPAPER ON THE UNDERSIDE OF TOP CENTER DRAWER HAS, “FRIDAY, MAY 23, 1913.”
Subjects
FURNITURE
Historical Association
SAFETY SERVICES
FURNISHINGS
PROFESSIONS
History
DESK BELONGED TO DONOR’S FATHER JERRY YAMAMOTO WHO PASSED AWAY ON OCTOBER 11, 1997. IN MAY 2012, COLLECTIONS TECHNICIAN KEVIN MACLEAN INTERVIEWED DONOR TERRY YAMAMOTO. THE FOLLOWING INFORMATION WAS EXTRACTED FROM THE INTERVIEW’S TRANSCRIPTION. WHEN ASKED ABOUT HIS FIRST MEMORY OF THE DESK, YAMAMOTO RESPONDED BY SAYING, “WELL… IT GOES BACK TO WHEN I WAS ABOUT ELEVEN YEARS OLD. MY DAD BUILT THE HOUSE, HE BUILT IT ON HIS OWN AND THE FIRST YEAR WE MOVED IN THERE I WAS ELEVEN LIKE WE LIVED IN THE BASEMENT WHILE HE BUILT THE UPSTAIRS. AS FAR AS I CAN REMEMBER THAT DESK HAS BEEN THERE SINCE THE TIME WE MOVED IN SO I WAS ELEVEN SO THAT WOULD BE 1963. IT WAS IN WHAT WE CALLED HIS RADIO ROOM. HE WAS A RADIO TECHNICIAN FOR THE RCMP AND HE JUST HAD IT SET IN THERE FOR HIS MUSIC AS A DESK. YEAH, HE DID YOU KNOW WELL HE FIXED RADIOS HE WAS A RADIO TECH FOR THE RCMP SO HE WOULD TINKER AROUND FIXING RADIOS AND THINGS LIKE THAT. HE WAS ALSO A HAM OPERATOR. [FOR] AS LONG AS I CAN REMEMBER HE WAS WITH THE RCMP. I WAS BORN IN ‘52, 1952 SO IT HAD TO BE AROUND THAT TIME OR AFTER THAT HE JOINED THE RCMP BECAUSE AS LONG AS I CAN REMEMBER HE ALWAYS WORKED WITH THEM. HE STARTED OUT AS OPERATING RADIOS THEN JUST WENT ON COURSES AND WHATEVER WITH THE RCMP AND THEN HE BECAME THE RADIO TECHNICIAN FOR SOUTHERN ALBERTA. [WHEN HE STARTED, HE WAS DOING] THE RADIO TRANSMISSION WITH EVERY COP IN THE CARS. AND BASICALLY THE RCMP SENT HIM BACK AND PUT HIM ON TRAINING FOR RADIO TECHNICIAN AND HE WAS WITH THEM UNTIL HE RETIRED. HE LIKED IT BECAUSE HE SERVICED NOT ONLY THE CAR RADIOS BUT ALL THE RADIO TOWERS FOR SOUTHERN ALBERTA. THE ONE THING HE REALLY ENJOYED WAS HE HAD RETIRED AND THEN WHEN THE OLYMPICS CAME, THE SKIING, THE WORLD CUP IN 1980, SECURITY OR WHATEVER. THE RCMP SENT HIM OUT TO OTTAWA ON A SPECIAL, BROUGHT HIM OUT OF RETIREMENT, SENT HIM TO OTTAWA FOR A SPECIAL COURSE AND THEN HE HAD TO HE WAS UP AT LAKE LOUISE AND BANFF AND THEY WERE DOING ALL THE SECURITY ON THE TOWERS AND EVERYTHING.” WHEN ASKED IF SHE REMEMBERED ANY OF THE HISTORY OF THE DESK BEFORE HIS FATHER’S USE, YAMAMOTO SAID, “ALL I REMEMBER IS HIM SAYING IS THAT IT CAME FROM THE FORT MACLEOD RCMP BARRACKS AND HIM AND JUDGE GORE-HICKMAN HAD COLLECTED WEIRD THINGS. BUT ANYWAYS IT HAD SOMETHING TO DO WITH JUDGE GORE-HICKMAN SO I DON’T IF HE ACTUALLY HAD IT IN THE BEGINNING AND GAVE IT MY DAD TOOK IT BUT IT DID ACTUALLY COME FROM THE FORT MACLEOD RCMP BARRACKS. [MY FATHER] AND JUDGE GORE-HICKMAN WERE FRIENDS OF A DIFFERENT KIND AND LIKE I SAY THEY COLLECTED WEIRD THINGS.” WHEN ASKED ABOUT THE DAMAGE ON THE TOP SURFACE OF THE DESK, YAMAMOTO EXPLAINED, “YEAH, THAT WAS PROBABLY MY FAULT, I WAS USING IT FOR MY BEDDING PLANTS AND IT GOT SPRAYED WITH WATER. YOU KNOW I HAD THEM SITTING THERE I HAD A BOARD OVER TOP FOR A WHILE THERE.” ACCORDING TO INFORMATION PROVIDED BY KIM GUNN AND FORWARDED BY TOM EDGAR IN AN E-MAIL AT THE TIME OF DONATION, “THE DESK IS AN OLD RCMP DESK THAT WAS STANDARD ISSUE TO RCMP OFFICES ACROSS CANADA. WHEN THE RCMP GOT NEW DESKS IT WAS GIVEN TO DR. GORE-HICKMAN’S DAD FOR USE IN HIS OFFICE AT THE OLD POLICE STATION ON 5TH STREET. GORDIE REMEMBERS JERRY Y. AND THE DESK BEING IN HIS DAD’S OFFICE. HE SAYS HIS DAD AND JERRY WERE GOOD FRIENDS. GORDIE SAYS THAT HIS DAD STARTED OUT AS A POLICE MAGISTRATE AND THAT IS WHY HIS OFFICE WAS AT THE POLICE STATION.” *UPDATE* AT THE TIME OF CATALOGUING IN AUGUST, 2013, COLLECTIONS ASSISTANT DAVID SMITH DISCOVERED SOME ARCHIVAL DOCUMENTS IN THE TOP CENTER DRAWER. UPON CONSULTATION WITH DONOR, THESE DOCUMENTS WERE TRANSFERRED TO GALT ARCHIVES. FOR MORE INFORMATION, PLEASE SEE PERMANENT FILE.
Catalogue Number
P20110027000
Acquisition Date
2011-07
Collection
Museum
Images
Less detail