Skip header and navigation

7 records – page 1 of 1.

Other Name
PERSUADER OR COME-ALONG
Date Range From
1800
Date Range To
1900
Material Type
Artifact
Materials
STEEL, NICKEL PLATING
Catalogue Number
P19662209000
Material Type
Artifact
Other Name
PERSUADER OR COME-ALONG
Date Range From
1800
Date Range To
1900
Materials
STEEL, NICKEL PLATING
No. Pieces
1
Height
29.5
Width
8.3
Description
CHAIN WITH "T" SHAPED SOLID PIECE AT EACH END. SHAPED WITH GROOVE.
Subjects
REGULATIVE & PROTECTIVE T&E
Historical Association
SAFETY SERVICES
History
CHAIN IS WRAPPED AROUND WRIST, "T" PIECES FIT IN EACH OTHER & ARE TWISTED TO "PERSUADE" AN INDIVIDUAL TO FOLLOW A POLICE OFFICER. RETIRED POLICE CHIEF JIM CARPENTER SAYS THIS TYPE OF HANDCUFF WAS USED BY LETHBRIDGE CITY POLICE BEFORE MORE FAMILIAR MODERN HANDCUFF ADOPTED. ***** UPDATE: COPY BELOW WAS RESEARCHED AND WRITTEN FOR SUBMISSION TO LETHBRIDGE LIVING MAGAZINE ON 15 APRIL 2013, RELATED TO THE MUSEUM’S WHAT’S IT FEATURE. REFERENCES TO THE ARTIFACT’S REPRESENTATIONAL USE BY THE LATE, RETIRED CHIEF OF LETHBRIDGE POLICE JIM CARPENTER CAN BE FOUND ON PAGES 83 AND 104 OF HIS BOOK THE BADGE AND THE BLOTTER. RESEARCH WAS CONDUCTED BY MUSEUM VOLUNTEER KIRSTEN CHRISTOPHERSON. “COME-ALONGS” (ALSO KNOWN AS “CHAIN GRIPS” OR “CHAIN NIPPERS”) ARE AN EARLY FORM OF POLICE RESTRAINT USED FROM THE LATE 19TH TO MID 20TH CENTURY. THE LATE POLICE CHIEF JIM CARPENTER WROTE IN HIS BOOK THE BADGE AND THE BLOTTER THAT, WHEN HE BEGAN HIS CAREER WITH LETHBRIDGE CITY POLICE IN 1940, HE WAS ISSUED “COME-ALONG CHAINS” AMONGST OTHER THINGS. COME-ALONGS HAVE TWO “T” SHAPED HANDLES, THE LARGER OF WHICH IS INSET, ALLOWING FOR ONE “T” HANDLE TO BE INSERTED INTO THE OTHER. TO USE A COME-ALONG, AN OFFICER WRAPPED THE CHAIN COMPONENT OF THE HANDCUFF AROUND ONE OF THE DETAINEE’S WRISTS, COMBINING AND TWISTING THE NOW INTERLOCKED HANDLE, THEREBY SHORTENING THE CHAIN. THIS SHORTENING ACTION CAUSED DISCOMFORT AND PAIN FOR THE DETAINEE, PERSUADING HIM OR HER TO “COME-ALONG” BY FORCE. ONE CAN IMAGINE THE ISSUES OFFICERS FACED USING COME-ALONGS, AS IT ONLY CONTROLLED ONE OF THE DETAINEE’S TWO HANDS. THE RESTRAINT “TOOL” WAS EVENTUALLY DISCARDED BY POLICE AS THE TRADITIONAL HANDCUFF ROSE IN PROMINENCE. THIS CHANGE PROVIDED INCREASED SAFETY AND PEACE OF MIND FOR BOTH OFFICERS AND THEIR DETAINEES.
Catalogue Number
P19662209000
Acquisition Date
1966-12
Collection
Museum
Less detail
Other Name
FIRE HOSE JACKET
Date Range From
1975
Date Range To
2005
Material Type
Artifact
Materials
METAL, RUBBER
Catalogue Number
P20150010013
  2 images  
Material Type
Artifact
Other Name
FIRE HOSE JACKET
Date Range From
1975
Date Range To
2005
Materials
METAL, RUBBER
No. Pieces
1
Height
20.0
Length
32.9
Width
15.3
Description
RED METAL FIRE HOSE JACKET. EMBOSSED ON BOTH SIDES WITH “AKRON 77”. EACH END OF THE HOSE JACKET IS OPEN, TO ALLOW A HOSE TO GO THROUGH THE JACKET. HOSE JACKET IS HINGED ON THE TOP, HAS A HANDLE ON THE BOTTOM, AND ALSO OPENS FROM THE BOTTOM. A HINGED RECTANGULAR PIECE LIFTS UP TO ALLOW THE JACKET TO BE OPENED AND REVEALS THREE SQUARE OPENINGS. THERE ARE THREE SETS OF TWO RECTANGLES THAT FORM THREE SQUARES. WHEN CLOSED, THIS LARGE RECTANGLE WITH THREE SQUARE OPENINGS FITS OVER THE THREE RECTANGLE PAIRS. WHEN OPEN, THE JACKET REVEALS A BLACK RUBBER LINING. EMBOSSED ONTO THE RUBBER: “AKRON STYLE 77 HOSE JACKET LINER. - TO REPLACE LINER - 1. LIFT DOVETAILS FROM DOVETAIL SLOTS. 2. SQUEEZE SIDES OF LINER TOGETHER. 3. PULL LINER FROM HOUSING. 4. INSERT ONE END OF NEW LINER OVER PINS IN BOTTOM END OF HOUSING. 5. INSERT OTHER END OF LINER OVER PINS AT OPPOSITE END OF HOUSING. 6. INSERT DOVETAILS INTO DOVETAIL SLOTS. 7-29-011” ONE SIDE HAS A “Q1” STICKER ABOVE THE “N” IN “AKRON” STRUCTURALLY IN GOOD CONDITION, BUT THE FINISH IS VERY WORN AND HAS FLAKED OFF IN MANY PLACES. THE FINISH IS LOOSE AND CONTINUES TO FLAKE OFF.
Subjects
REGULATIVE & PROTECTIVE T&E
Historical Association
SAFETY SERVICES
History
THIS FIRE HOSE JACKET WAS USED BY THE LETHBRIDGE FIRE DEPARTMENT. IN A WRITTEN STATEMENT PROVIDED AT THE TIME OF DONATION, JESSE KURTZ, DEPUTY CHIEF – SUPPORT SERVICES (RETIRED), EXPLAINED THAT THIS JACKET IS A “HINGED TWO PART DEVICE TO BE PLACED OVER OR ON A 65MM HOSE LINE THAT HAS A LEAK IN IT. IT HAS RUBBER SEALS ON THE ENDS TO KEEP THE WATER IN. IT WAS KEPT ON EVERY FIRE ENGINE. WE STOPPED USING THEM WHEN WE REGULARLY STARTED TESTING HOSES AND FOUND LEAKY HOSES BEFORE A FIRE. SO [WE] NO LONGER HAD USE FOR THEM.” IN THE SUMMER OF 2015, COLLECTIONS TECHNICIAN KEVIN MACLEAN, CONDUCTED A SERIES OF INTERVIEWS WITH CURRENT AND FORMER MEMBERS OF THE FIRE DEPARTMENT, INCLUDING: CLIFF “CHARLIE” BROWN (HIRED IN 1966, RETIRED 2004) AND TREVOR LAZENBY (HIRED IN 1994). BROWN ADDED THAT HOSES GET “RAGGED AND TATTERED, DRAGGED ALONG THE PAVEMENT AND DRAGGED ALONG THE CURBS, [WHICH] WEARS IT OUT. IF THE HOSE EVER BURSTS, RATHER THAN CHANGING THE HOSE, BECAUSE SOMETIMES TO CHANGE A HOSE YOU’VE GOT TO PUT TWO HOSES ON AND SHUT THE WATER OFF, AND IF THE GUYS AREN’T THERE, OR THEY’RE IN THE BUILDING, YOU CAN’T SHUT THE WATER OFF, SO THAT JUST GOES OVER LIKE A SLEEVE AND CLAMPS DOWN.” LAZENBY ELABORATED, SAYING: “THE USE WAS THAT ANY TIME YOU’RE FLOWING WATER UNDER PRESSURE, THERE IS A POSSIBILITY THAT SOMETHING IS GOING TO BURST … SO YOU WOULD HAVE A BURST HOSE LENGTH. AND IF IT WASN’T IRREPARABLY DAMAGED OR IF THERE WAS A LEAK FROM A CERTAIN AREA OF THE HOSE, THIS HAD A RUBBER LINER THAT WAS BUILT IN EXACTLY LIKE A PERFECT CIRCLE THAT YOU WOULD BASICALLY ENCAPSULATE THE LEAK INSIDE OF THIS HOSE JACKET … NOWADAYS IF WE HAVE A BURST LENGTH, WE JUST REPLACE THE LENGTH. WE’LL SHUT THAT HOSE LINE DOWN; WE’LL TAKE TWO LENGTHS TO REPLACE ONE BECAUSE SOMETIMES AS HOSES ARE DAMAGED, THEY’LL CUT 8 FEET OFF … SO YOU HAVE A 42 FOOT HOSE INSTEAD OF 50 FEET … [WHICH LEAVES YOU] SHORT, SO THAT’S WHY YOU ALWAYS TAKE TWO LENGTHS TO REPLACE ONE … I THINK ONE OF THE REASONS WE WENT AWAY FROM THESE IS THAT WE HAVE A VERY STRINGENT HOSE TESTING PROCESS IN PLACE NOW. OUR HOSES GET TESTED EVERY YEAR TO THEIR MAXIMUM OPERATING PRESSURE AND BEYOND TO MAKE SURE THAT THEY CAN WITHSTAND PRESSURES THAT WE PUT THROUGH THEM … I WANT TO SAY THAT THOSE WERE ON THE TRUCKS ALMOST UP TO 10 YEARS AFTER I STARTED, SO UP TO A DOZEN YEARS AGO WE STILL SAW THESE [IN SERVICE].” SEE PERMANENT FILE FOR FULL INTERVIEW TRANSCRIPTS AND ADDITIONAL INFORMATION ABOUT THE LETHBRIDGE FIRE DEPARTMENT.
Catalogue Number
P20150010013
Acquisition Date
2015-02
Collection
Museum
Images
Less detail
Other Name
ATTIC LADDER
Date Range From
1960
Date Range To
2010
Material Type
Artifact
Materials
METAL, RUBBER
Catalogue Number
P20150010022
  2 images  
Material Type
Artifact
Other Name
ATTIC LADDER
Date Range From
1960
Date Range To
2010
Materials
METAL, RUBBER
No. Pieces
1
Height
314.2
Length
4.9
Width
33.5
Description
ADJUSTABLE LADDER, SIDE RAILS COME TOGETHER TO MAKE THE LADDER MORE COMPACT (LADDER IS ONLY 8.0CM WIDE WHEN THE SIDE RAILS ARE TOGETHER). SILVER COLOURED METAL, WITH ORANGE PAINT, BLACK RUBBER, AND EIGHT RUNGS. ANTI-SLIP SAFETY SHOE ON THE BOTTOM OF BOTH SIDE RAILS. SAFETY SHOE IS BLACK RUBBER ON THE BOTTOM, WITH A PATTERN OF 10 CIRCLES PER SHOE BOTTOM. METAL TEETH ON THE FRONT OF THE SHOE. SHOES ARE ADJUSTABLE, BUT ARE VERY STIFF. BRACE COMES UP FROM THE BOTTOM AND LOCKS TO PREVENT LADDER RAILS FROM COLLAPSING BACK TOGETHER. BOTTOM OF LADDER HAS A 54.5CM SECTION OF BRIGHT ORANGE PAINT AND TOP HAS A 46.0CM SECTION OF BRIGHT ORANGE PAINT. TOP OF ONE RAIL HAS A BLACK RUBBER TOPPER. SMALL BLACK STICKER AT BOTTOM “P1” WITH SEVERAL STICKERS ON THE OPPOSITE RAIL: A ROUGHLY OVAL SHAPED, RED, BLACK, AND SILVER STICKER: “THIS IS A DUO-SAFETY LADDER. DUO-SAFETY LADDER CORP 519 W 9TH AVE. OSHKOSH, WIS.”; THEN A RECTANGULAR RED STICKER WITH WHITE WRITING: “THIS LADDER IS CERTIFIED TO COMPLY WITH N.F.P.A. SPEC 1931-1832; CURRENT EDITION, FOR FIRE DEPARTMENT GROUND LADDERS AND OSHA FIRE LADDER REQUIREMENTS. REFER TO DUO-SAFETY LADDER SAFETY BOOK FOR CARE – USE – MAINTENANCE ON THIS LADDER. DUO-SAFETY LADDER CORP. OSHKOSH, WI 54901”; THEN A WHITE STICKER WITH GOLD WRITING: “10”. THERE IS ALSO A SILVER COLOURED STICKER WITH HANDWRITING ON THIS SAME RAIL, LOCATED BETWEEN THE FIRST AND SECOND RUNGS: “TEST DATE: 25 NOV 2006. LADDER #: ATTIC #18. APPARATUS #: P1. APPARATUS #: P1.” BOTH RAILS HAVE THE FOLLOWING STICKERS, AT ROUGHLY THE MID-POINT OF THE LADDER: RECTANGULAR, WHITE BACKGROUND, BLUE BORDER, BLACK WRITING: “DANGER. FAILURE TO USE, UNDERSTAND, AND FOLLOW PROPER LADDER USAGE INSTRUCTIONS AS MADE AVAILABLE BY DUO-SAFETY LADDER, N.F.P.A., I.S.F.S.I., A.N.S.I., O.S.H.A., ETC. COULD CAUSE SERIOUS INJURY AND/OR DEATH.” RECTANGULAR, WHITE BACKGROUND, BLACK BORDER AND WRITING: “DANGER. WATCH FOR WIRES. THIS LADDER CONDUCTS ELECTRICITY.” RECTANGULAR, YELLOW, WITH BLACK WRITING: CAUTION. SET UP LADDER PROPERLY TO REDUCE SLIP AND OVERHEAD HAZARDS. FOLLOW THESE INSTRUCTIONS. 1. PLACE TOES AGAINST BOTTOM OF LADDER SIDE RAILS. 2. STAND ERECT. 3. EXTEND ARMS STRAIGHT OUT. 4. PALMS OF HANDS SHOULD TOUCH TOP OF RUNG AT SHOULDER LEVEL. OUT -->” STICKER ON THE INSIDE OF FOURTH RUNG FROM THE BOTTOM: WHITE BACKGROUND, BLACK WRITING: “REMOVE LADDER FROM SERVICE AND TEST IF ANY HEAT SENSOR TURNS DARK -->” LADDER IS IN GOOD OVERALL CONDITION. ADJUSTABLE FEET ARE VERY STIFF. LOTS OF SCUFF MARKS ALL OVER LADDER AND SOME STICKERS HAVE BEEN PARTIALLY REMOVED/SCRATCHED.
Subjects
REGULATIVE & PROTECTIVE T&E
Historical Association
SAFETY SERVICES
History
THIS ATTIC LADDER WAS USED BY THE LETHBRIDGE FIRE DEPARTMENT. IN A WRITTEN STATEMENT PROVIDED AT THE TIME OF DONATION, JESSE KURTZ, DEPUTY CHIEF – SUPPORT SERVICES (RETIRED), EXPLAINED THAT THE LADDER WAS “USED TO ACCESS ATTIC SPACES THROUGH SMALL ACCESS HOLES IN CEILINGS. USED WHEN WE DID NOT WANT TO PULL A CEILING DOWN AFTER A FIRE TO ENSURE THAT THE FIRE IN THE ATTIC WAS OUT.” HE CONTINUED SAYING THAT THIS LADDER WAS DECOMMISSIONED BECAUSE IT IS “OLD AND WORN OUT. ALL LADDERS MUST MEET MINIMUM ACCEPTANCE STANDARDS.” IN THE SUMMER OF 2015, COLLECTIONS TECHNICIAN KEVIN MACLEAN, CONDUCTED A SERIES OF INTERVIEWS WITH CURRENT AND FORMER MEMBERS OF THE FIRE DEPARTMENT, INCLUDING: CLIFF “CHARLIE” BROWN (HIRED IN 1966, RETIRED 2004), TREVOR LAZENBY (HIRED IN 1994), AND LAWRENCE DZUREN (HIRED 1959, RETIRED 1992). BROWN EXPLAINED THAT THIS IS “WHAT WE CALL A LITTLE ATTIC LADDER, TO GET BACK INTO A TIGHT PLACE WHERE YOU COULDN’T BRING A BIG LADDER IN … YOU COULD GET IT UP INTO THE ATTIC SO YOU COULD CHECK WHAT WAS IN THE ATTIC.” LAZENBY ELABORATED: “THIS IS A FOLDING ATTIC LADDER … THE RUNGS THAT SEPARATE THE TWO BEAM SECTIONS ARE ACTUALLY HINGED IN NATURE AND SO IT FOLDS UP AND FITS IN, TYPICALLY, A LITTLE COMPARTMENT ON THE BACK END OF THE TRUCK BECAUSE [THEY] HAVE SOME LONG, LATERAL STORAGE THERE. THESE SURPRISINGLY GET USED A FAIR AMOUNT, STILL.” HE CONTINUED SAYING “THEY’RE NARROW ENOUGH THAT THEY’RE ALMOST DIFFICULT TO CLIMB WITH YOUR BIG FIRE BOOTS ON.” LAZENBY EXPLAINED THAT THE LADDERS IN USE PRESENTLY ARE VERY SIMILAR TO THIS MODEL: “YOU CAN TELL BY LOOKING AT IT IT’S AN OLDER PIECE BUT THE CONSTRUCTION IS ESSENTIALLY THE SAME. THEY MIGHT BE USING SLIGHTLY LIGHTER MATERIALS NOW, BUT FROM WHAT I CAN SEE, THEY’RE BASICALLY THE SAME.” HE ADDED THAT HE WAS OFTEN THE ONE USING THE LADDER: “BECAUSE I WAS NEVER ONE OF THE BIGGER GUYS ON THE JOB, AND ESPECIALLY WHEN I STARTED I WAS PROBABLY TWENTY POUNDS LIGHTER THAN I AM NOW, IF THEY NEEDED SOMEONE TO GET INTO A SMALLER SPACE, I WAS THAT GUY, TYPICALLY, BECAUSE WHEN YOU WEIGHT 250 [POUNDS] AND YOU THROW THE SCBA ON AND ALL THE EQUIPMENT, IT’S DEFINITELY TOUGH FOR SOME OF THOSE GUYS TO GET THROUGH THAT ACCESS. SO, YES, I’VE BEEN IN MY FAIR SHARE OF ATTICS AND THAT’S THE ONLY MEANS TO GET UP THERE.” LAZENBY EXPLAINED THE IMPORTANCE OF USING THE LADDER: “ANY TIME A FIRE VENTS OUT OF A WINDOW AND TOUCHES ANY PART OF THE SOFFIT, IT’S INCUMBENT THAT YOU HAVE TO ABSOLUTELY CHECK THAT BECAUSE IF YOU DON’T AND YOU’RE OPERATING UNDERNEATH AN ATTIC FIRE, THAT’S A VERY, VERY UNSAFE PLACE TO BE.” DZUREN ADDED: “THAT’S A COLLAPSIBLE LADDER. IT’S KIND OF LIKE A SCISSOR TYPE OF LADDER. IT WAS VERY COMPACT, YOU COULD STORE IT ON ONE OF YOUR VEHICLES WITHOUT IT TAKING UP TOO MUCH ROOM … YOU’D CARRY THAT INTO YOUR HOUSE IF AN OFFICER WANTED YOU TO GO UP INTO AN ATTIC … IT WAS EASY TO TRANSPORT AND ONCE YOU GOT IT INTO THE OPENING YOU COULD JUST GIVE IT A SWITCH AND IT WOULD OPEN UP AND YOU COULD JUST CLIMB RIGHT UP TO THE SPOT THERE.” SEE PERMANENT FILE FOR FULL INTERVIEW TRANSCRIPTS AND ADDITIONAL INFORMATION ABOUT THE LETHBRIDGE FIRE DEPARTMENT.
Catalogue Number
P20150010022
Acquisition Date
2015-02
Collection
Museum
Images
Less detail
Other Name
WATER CURTAIN NOZZLE
Date Range From
1960
Date Range To
2005
Material Type
Artifact
Materials
METAL, RUBBER
Catalogue Number
P20150010015
  2 images  
Material Type
Artifact
Other Name
WATER CURTAIN NOZZLE
Date Range From
1960
Date Range To
2005
Materials
METAL, RUBBER
No. Pieces
1
Height
19.0
Length
24.8
Width
16.6
Diameter
9.0
Description
ADJUSTABLE SILVER COLOURED METAL WATER CURTAIN NOZZLE. CENTRAL CYLINDRICAL PORTION HAS A COUPLING ON ONE END, THROUGH WHICH BLACK RUBBER IS VISIBLE. THE OPPOSITE END HAS A CAP ON THE END OF THE CYLINDER. THIS CAP HAS A SMALL KNOB, WHICH HAS A VERY SHORT PIECE OF THIN CHAIN ATTACHED. COMING OUT FROM THE TOP OF THE CLYINDER IS THE DUAL-ADJUSTABLE NOZZLE: A 90 DEGREE FITTING ALLOWS THE NOZZLE TO ROTATE HORIZONTALLY AND HAS A BOLT THAT CAN BE TIGHTENED TO PREVENT FURTHER ROTATION; THE SECOND COMPONENT ROTATES VERTICALLY AND IS ROUGHLY SHAPED LIKE A THUMBLESS MITTEN AND AN 11CM LONG SLIT THAT ALLOWS THE WATER TO SPRAY OUT. BELOW THE NOZZLE, COMING OUT FROM THE SIDES OF THE CYLINDER, IS A ROUGHLY TRIANGULAR SHAPED PORTION, WHICH GOES UNDER THE CYLINDER AND HAS TWO SMALL BOLTS ON THE VERY BOTTOM. EACH OF THE ARMS OF THIS TRIANGULAR SHAPE HAVE A RED STRIPE, WITH ONE HAVING A STICKER OF "Q1" IN THE RED STRIPE. OVERALL IN FAIR TO GOOD CONDITION. THE SILVER FINISH ON THE METAL HAS FLAKED OFF, ESPECIALLY ON THE EDGES/CORNERS, AROUND THE COVER WITH THE SMALL PIECE OF CHAIN AND AROUND THE COUPLING. THE RED STRIPES HAVE PARTIALLY SCRATCHED OFF. THE "Q1" STICKER IS LOOSE.
Subjects
REGULATIVE & PROTECTIVE T&E
Historical Association
SAFETY SERVICES
History
THIS WATER CURTAIN NOZZLE WAS USED BY THE LETHBRIDGE FIRE DEPARTMENT. IN THE SUMMER OF 2015, COLLECTIONS TECHNICIAN KEVIN MACLEAN, CONDUCTED A SERIES OF INTERVIEWS WITH CURRENT AND FORMER MEMBERS OF THE FIRE DEPARTMENT, INCLUDING: CLIFF “CHARLIE” BROWN (HIRED IN 1966, RETIRED 2004), TREVOR LAZENBY (HIRED IN 1994), LAWRENCE DZUREN (HIRED IN 1959, RETIRED 1992), AND RAYMOND “RAY” PETIT (HIRED 1965, RETIRED 1998). BROWN RECALLED “THAT’S JUST A KIND OF SPRAY CURTAIN BETWEEN BUILDINGS. I DON’T EVER REMEMBER USING IT. THAT’S WHAT IT IS. IF ONE BUILDING IS ON FIRE, AND YOU WANT TO TRY AND SAVE THE OTHER BUILDING, YOU PUT IT ON THERE, JUST KIND OF A BIG WALL OF SPRAY, AND THAT WOULD KEEP THE OTHER BUILDING SAFE.” LAZENBY ADDED: “THIS IS CALLED A CURTAIN NOZZLE AND THE IDEA BEHIND THIS NOZZLE WAS … FOR EXPOSURE PROTECTION. AND, WHAT I MEAN BY THAT IS, IF YOU HAVE A HOUSE IN THE MIDDLE OF THE STREET THAT’S ON FIRE AND THE FIRE IS VENTING OUT THE WINDOWS ON ONE SIDE, THE HOUSE THAT IS IMMEDIATELY EXPOSED TO THAT HOUSE THAT’S ON FIRE, WE CONSIDER THAT AN EXPOSURE HAZARD … THE BEST WAY TO STOP HEAT FROM TRANSFERRING RADIANTLY FROM HOUSE A TO HOUSE B WAS TO PUT UP A STREAM OF WATER IN BETWEEN THE HOUSES … IT DIDN’T WORK VERY WELL WHEN IT WAS WINDY AND UNFORTUNATELY WITH THE WINDS THAT WE GET AROUND HERE IT BECAME INEFFECTIVE AT TIMES, AND IT ALSO WASN’T VERY STABLE. IF YOU PUMPED THIS THING TO MORE THAN ABOUT 60 POUNDS PER SQUARE INCH AT THIS NOZZLE, IT BECAME UNSTABLE AND IT WOULD FLIP OVER … THE IDEA AND THE CONCEPT WAS EXCELLENT … BUT I THINK [IN THE END] IT DIDN’T WORK AS WELL AS WHAT WAS HOPED.” LAZENBY CONTINUED, STATING THAT THE NOZZLES WERE “DEFINITELY ON THE TRUCKS WHEN I STARTED … [AND THAT] SOMEWHERE AROUND 2005” THEY WERE REMOVED FROM THE TRUCKS AND REPLACED WITH A “BLITZ FIRE NOZZLE”. HE RECALLED THAT THE WATER CURTAIN NOZZLE WAS USEFUL: “I SAW IT DEPLOYED. WE DID USE IT. AND AS FAR AS EFFICACY, IT’S HARD TO KNOW REALLY WHAT WOULD HAVE HAPPENED IF IT HADN’T BEEN THERE, SO, DID IT DO ITS JOB? YES, IT DID. THEY WERE JUST A LITTLE BIT TOO FINICKY AND JUST MAYBE DIDN’T WORK QUITE AS WELL AS THE NEWER TECHNOLOGY THAT WAS COMING ON THE MARKET.” PETIT ADDED THAT THE WATER CURTAIN NOZZLE WAS “JUST LIKE A SPRINKLER SYSTEM … YOU COULD PUT THAT BETWEEN THE TWO [CLOSE TOGETHER] BUILDINGS SO YOU COULD PROTECT THE OTHER ONE … I’VE SEEN IT USED, NOT IN A FIRE, BUT IN DRILLS … IT PROBABLY CAME IN AFTER [I STARTED IN THE 1960S] BUT LIKE I SAY, THE ONLY TIME I’VE EVER USED IT WAS WHEN WE HAD SOME DRILLS.” DZUREN RECALLED AN EARLIER VERSION: "I DON’T RECALL EVER USING THAT. NOW, THERE’S ANOTHER ONE THAT’S … GOT THESE LEGS SITTING HERE LIKE THAT [AND] YOU WOULD SET THAT ON THE GROUND. NOW IF THAT WAS TO HOOK UP A HOSE, THIS COULD BE SOMETHING WHERE YOU COULD HAVE A CONSTANT SPRAY GOING OUT. SAY IF THERE’S A FIRE THERE, AND YOU WANT TO PROTECT AN EXPOSURE CLOSE BY, AND THE FACT THAT THIS TRIPOD THERE, TO HAVE IT SITTING STEADY ON THE GROUND, AND THE SPRAY WOULD COME OUT OF THERE, THAT’S ALL THAT COMES TO MIND." "WE HAD A FIRE DOWN TOWN HERE, IT WAS THE OLD SAAN STORES ON THIS STREET, AND THERE WAS A FIRE IN THE UPPER STORY, AND WE, THERE WERE POWER LINES AND TRANSFORMERS RIGHT IN THE ALLEY, AND WE SET UP WHAT WE CALL A CURTAIN NOZZLE, AND IT WAS BASICALLY, BUT IT DIDN’T LOOK LIKE THAT, IT WAS BASICALLY THAT, BUT IT WAS A FLAT PIECE OF BRASS ABOUT THAT LONG WITH HOLES IN IT, AND WE PUT THAT ON SO IT WOULD BE A SPRAY GOING UP FAIRLY HIGH, I THINK IT WENT PROBABLY TWENTY-FIVE, THIRTY FEET HIGH. ONCE YOU PUT THE TWO AND A HALF INCH NOZZLE ON THERE WITH THE HIGH PRESSURE TO PROTECT THE TRANSFORMERS FROM HEAT, FROM THE BUILDING THAT WAS BURNING. NOW, THAT’S THE ONLY THING I CAN THINK OF, OF WHAT THAT MIGHT BE, BUT I DON’T, I DON’T REMEMBER THAT…” SEE PERMANENT FILE FOR FULL INTERVIEW TRANSCRIPTS AND ADDITIONAL INFORMATION ABOUT THE LETHBRIDGE FIRE DEPARTMENT.
Catalogue Number
P20150010015
Acquisition Date
2015-02
Collection
Museum
Images
Less detail
Other Name
GATE VALVE / SLUICE VALVE
Date Range From
1975
Date Range To
2000
Material Type
Artifact
Materials
METAL, CAST IRON, BRASS
Catalogue Number
P20150010014
  2 images  
Material Type
Artifact
Other Name
GATE VALVE / SLUICE VALVE
Date Range From
1975
Date Range To
2000
Materials
METAL, CAST IRON, BRASS
No. Pieces
1
Height
30.0
Length
22.5
Width
11.7
Diameter
9.0
Description
CAST IRON, BRASS, AND SILVER COLOURED METAL GATE VALVE. SILVER COLOURED METAL HAND WHEEL IN THE SHAPE OF A SIDEWAYS 'L' ON TOP OF THE GATE VALVE ALLOWS THE INNER GATE TO BE OPENED OR CLOSED. BELOW THIS IS A BRASS NUT, WHICH IS ON TOP OF THE MAIN CAST IRON PORTION OF THE VALVE. MAIN PORTION OF THE VALVE IS RECTANGULAR, WITH A ROUNDED TOP NEAR THE BRASS NUT. EMBOSSED ON THE RECTANGULAR FRONT PORTION OF THE VALVE IS "HASBRA", WITH "HQ" BELOW THAT IN YELLOW PAINT. SIDE OF THE VALVE HAS "FD" ALSO IN YELLOW PAINT. ON THE BACK OF THE VALVE IS A COUPLING, WHICH ALLOWS THE VALVE TO BE AFFIXED TO A FIRE HYDRANT. OPPOSITE THIS COUPLING IS A SLIGHTLY CURVED SPOUT, WHICH IS THREADED ON THE END. ON THE BOTTOM OF THE GATE VALVE IS A 1.9CM KNOB.
Subjects
REGULATIVE & PROTECTIVE T&E
Historical Association
SAFETY SERVICES
History
THIS GATE VALVE WAS USED BY THE LETHBRIDGE FIRE DEPARTMENT. IN A WRITTEN STATEMENT PROVIDED AT THE TIME OF DONATION, JESSE KURTZ, DEPUTY CHIEF – SUPPORT SERVICES (RETIRED), EXPLAINED THAT THE VALVE WAS “USED TO [CONTROL THE] FLOW OF WATER FROM THE SMALL OUTLET ON A HYDRANT AND BE ABLE TO SHUT THE WATER OFF WITHOUT TURNING THE HYDRANT OFF. WE USED THESE MOSTLY WHEN TESTING THE HYDRANTS FOR PRESSURE AND FLOW. THE FIRE DEPARTMENT STOPPED TESTING HYDRANTS WHEN WATER WORKS TOOK IT OVER.” IN THE SUMMER OF 2015, COLLECTIONS TECHNICIAN KEVIN MACLEAN, CONDUCTED A SERIES OF INTERVIEWS WITH CURRENT AND FORMER MEMBERS OF THE FIRE DEPARTMENT, INCLUDING: CLIFF “CHARLIE” BROWN (HIRED IN 1966, RETIRED 2004) AND TREVOR LAZENBY (HIRED IN 1994). BROWN EXPLAINED THAT THE GATE VALVE “WAS JUST A VALVE TO SHUT OFF…[AND THAT] YOU’D FILL YOUR TRUCKS OFF A HYDRANT.” LAZENBY EXPANDED SAYING: “YOU CAN HOOK THESE ONTO THE SIDE OF A TRUCK BECAUSE THE THREAD OF THE ADAPTER HERE HOOKS ON TO THE TWO AND HALF INCH COUPLE THAT COMES OFF THE MALE END THAT COMES OFF THE BACK OF THE TRUCK. YOU CAN ALSO ATTACH THIS TO THE HYDRANT AND LEAVE THE GATE TURNED OFF, OPEN THE HYDRANT SO THAT YOU GET FLOW AS FAR AS WHERE THE GATE IS–SO YOU COULD ISOLATE THIS LINE FROM THE REST OF THE HYDRANT IF YOU WANTED TO…SO IT’S JUST A WAY OF HAVING ACCESS TO WATER WHEN YOU WANT IT BUT NOT HAVING TO OPEN AND CLOSE THE FULL HYDRANT SYSTEM EVERY SINGLE TIME…WE HAVE USED THESE AN AWFUL LOT; WE’VE USED THESE IN A RURAL SETTING, WE’VE USED THEM FOR FILLING TRUCKS UP … I’VE USED THESE AN AWFUL LOT.” SEE PERMANENT FILE FOR FULL INTERVIEW TRANSCRIPTS AND ADDITIONAL INFORMATION ABOUT THE LETHBRIDGE FIRE DEPARTMENT.
Catalogue Number
P20150010014
Acquisition Date
2015-02
Collection
Museum
Images
Less detail
Other Name
HYDRANT WRENCH
Date Range From
1990
Date Range To
2015
Material Type
Artifact
Materials
METAL
Catalogue Number
P20150010012
  2 images  
Material Type
Artifact
Other Name
HYDRANT WRENCH
Date Range From
1990
Date Range To
2015
Materials
METAL
No. Pieces
1
Height
2.9
Length
64.2
Width
11.4
Description
ADJUSTABLE FIRE PLUG WRENCH, ALSO KNOWN AS A HYDRANT WRENCH. SILVER COLOURED METAL HANDLE WITH BLACK PAINTED METAL HEAD. HANDLE HAS A 10.2CM SECTION OF ENGRAVED CROSSHATCHING AT THE BOTTOM, KNOWN AS A KNURLED GRIP. ON THE LOWER PORTION OF THE BLACK HEAD, WHERE THE HEAD AND HANDLE MEET, THE FOLLOWING IS EMBOSSED: “RED HEAD – S W 3”. THE OTHER SIDE IS EMBOSSED WITH SIMPLY “RED HEAD”. JUST ABOVE THE EMBOSSED “RED HEAD” IS AN ADJUSTABLE WEDGE NUT, TO ALLOW THE USER TO REMOVE THE TOP BOLT (OPERATING NUT) OF A HYDRANT. WRENCH HEAD HAS THREE HOOKS: THE FIRST, CLOSEST TO THE ADJUSTABLE WEDGE NUT IS FOR USE ON HYDRANT ADAPTERS (THE SMALLER ARMS OF A HYDRANT); THE OTHER TWO ARE FOR USE ON THE NOZZLE CAP (THE LARGE, REMOVABLE COVER ON THE FRONT OF A HYDRANT). OVERALL IN FAIR TO GOOD CONDITION. THE FINISH ON THE BLACK HEAD HAS FLAKED OFF IN SEVERAL AREAS, ESPECIALLY ON THE THREE HOOKS AND ON THE INSIDE OF THE ADJUSTABLE WEDGE NUT HOUSING. SURFACE RUST HAS DEVELOPED WHERE THE METAL IS EXPOSED. SILVER METAL HANDLE IN VERY GOOD CONDITION, WITH ONLY A FEW SURFACE STAINS.
Subjects
REGULATIVE & PROTECTIVE T&E
Historical Association
SAFETY SERVICES
History
THIS ADJUSTABLE FIRE PLUG WRENCH (HYDRANT WRENCH) WAS USED BY THE LETHBRIDGE FIRE DEPARTMENT. IN A WRITTEN STATEMENT, PROVIDED AT THE TIME OF DONATION, JESSE KURTZ, DEPUTY CHIEF – SUPPORT SERVICES (RETIRED), SAID IT “WAS NOT ISSUED TO ALL FIRE FIGHTERS, NOR [WAS IT] CARRIED ON THEIR PERSON … [IT] IS A COMBINATION TOOL THAT IS ADJUSTABLE. IT [WAS] ALSO USED ON HIGH VOLUME (I.E. 5” OR 125MM HOSE COUPLINGS). IN THE SUMMER OF 2015, COLLECTIONS TECHNICIAN KEVIN MACLEAN, CONDUCTED A SERIES OF INTERVIEWS WITH CURRENT AND FORMER MEMBERS OF THE FIRE DEPARTMENT, INCLUDING: CLIFF “CHARLIE” BROWN (HIRED IN 1966, RETIRED 2004), TREVOR LAZENBY (HIRED IN 1994), AND RAYMOND “RAY” PETIT (HIRED 1965, RETIRED 1998). BROWN ELABORATED, SAYING: “I DON’T EVER REMEMBER USING IT, EVER. IT WAS THAT WE USED THE HYDRANT KEY [INSTEAD]. BASICALLY, IT WAS THE SAME THING; IT WAS FOR A HYDRANT THAT WAS STUCK MORE. I KNOW THAT SOMETIMES I COULDN’T OPEN A HYDRANT. [BUT] ALL I HAD TO [DO WAS] LOOK AROUND FOR ONE OF THE BIG GORILLAS AT WORK AND SAY ‘I CAN’T OPEN THIS HYDRANT.’ HE’D COME AND HE’D TWIST IT AND THE HYDRANT WAS COMING OFF ITS STAND. THERE WERE SO MANY GUYS SO MUCH MORE POWERFUL THAN I WAS.” LAZENBY ADDED: “THAT WAS SORT OF THE FIRST GENERATION OF HYDRANT OPENING TOOLS [REFERENCING P20150010011]. THIS [P20150010012] I WOULD SAY, IS MAYBE GENERATION NUMBER TWO. YOU CAN SEE BY THE LONG STEM THAT’S THREADED HERE, THAT THIS IS ADJUSTABLE IN NATURE AND THIS WAS CONSIDERED LIKE A MORE OF A MULTI-TOOL … NOW WE’VE MOVED ONTO RATCHETING [WRENCHES] SO THAT YOU DON’T EVEN HAVE TO GO ALL THE WAY AROUND … I BELIEVE WE STILL HAVE SOME OF THESE ON THE DEPARTMENT AND I THINK WE DON’T MOUNT THESE TO THE BACK OF THE TRUCKS ANYMORE, BUT YOU STILL MIGHT FIND A COUPLE OF THESE UP ON THE HIGHBALL HOSES ON THE HOSE BEDS.” PETIT AGREED WITH KURTZ, SAYING: “I’M SURE IT WAS CARRIED ON THE PUMP, IT WASN’T CARRIED BY THE FIRE FIGHTERS.” SEE PERMANENT FILE FOR FULL INTERVIEW TRANSCRIPTS AND ADDITIONAL INFORMATION ABOUT THE LETHBRIDGE FIRE DEPARTMENT.
Catalogue Number
P20150010012
Acquisition Date
2015-02
Collection
Museum
Images
Less detail
Other Name
HYDRANT WRENCH
Date Range From
1950
Date Range To
2000
Material Type
Artifact
Materials
METAL
Catalogue Number
P20150010011
  2 images  
Material Type
Artifact
Other Name
HYDRANT WRENCH
Date Range From
1950
Date Range To
2000
Materials
METAL
No. Pieces
1
Length
42.5
Width
14.7
Description
METAL HYDRANT WRENCH, NOT ADJUSTABLE. WRENCH IS ROUGHLY AN 'L' SHAPE. ONE END OF THE WRENCH HAS A SINGLE CLAW, USED FOR PRYING. THE OPPOSITE END (THE SHORT END OF THE 'L') HAS A REULEAUX TRIANGLE, A SLIGHT HOOK, AND A SMALL (2.5CM) CIRCLE. IN THE MIDDLE OF THE HANDLE, ON ONE SIDE ONLY, IS A RECTANGULAR PATCH OF LIGHT GREY PAINT. THERE ARE REMNANTS OF LIGHT GREY FINISH ON THE REST OF THE WRENCH. OVERALL IN FAIR CONDITION. VERY RUSTED. GREY FINISH HAS ALMOST ENTIRELY FLAKED OFF. THE RECTANGULAR AREA OF GREY FINISH IS LOOSE.
Subjects
REGULATIVE & PROTECTIVE T&E
Historical Association
SAFETY SERVICES
History
THIS FIRE PLUG WRENCH, OR HYDRANT WRENCH, WAS USED BY THE LETHBRIDGE FIRE DEPARTMENT. IN THE SUMMER OF 2015, COLLECTIONS TECHNICIAN KEVIN MACLEAN, CONDUCTED A SERIES OF INTERVIEWS WITH CURRENT AND FORMER MEMBERS OF THE FIRE DEPARTMENT, INCLUDING: CLIFF “CHARLIE” BROWN (HIRED IN 1966, RETIRED 2004), TREVOR LAZENBY (HIRED IN 1994), RAYMOND “RAY” PETIT (HIRED 1965, RETIRED 1998), AND LAWRENCE DZUREN (HIRED 1959, RETIRED 1992). ACCORDING TO BROWN THIS IS A “GOOD OLD HYDRANT KEY. WE ALL CARRIED ONE ON OUR BELT … IT WAS MADE OF PRETTY DURABLE STEEL. YOU COULD PRY ON THAT THING ALL YOU WANTED. I DON’T EVER REMEMBER ONE BREAKING. YOU COULD USE IT AS A HAMMER, AS A CLUB. WE ALWAYS JOKED – WE’D USE IT AS A WEAPON IF WE EVER GOT INTO TROUBLE WITH OTHER PEOPLE. IT NEVER HAPPENED – JUST A JOKE. IT WAS PROBABLY YOUR MAIN LINE TOOL, BREAK WINDOWS, BREAK DOORS IN. YOU KNOW, WE DIDN’T HAVE A WHOLE LOT OF REAL FANCY TOOLS IN THOSE DAYS BUT THAT HYDRANT KEY WAS VERY IMPORTANT TO US. WE CARRIED THEM ON OUR HYDRANT BELTS.” LAZENBY EXPANDED: “WHEN I WAS HIRED EVERY MEMBER OF THE DEPARTMENT WAS ISSUED ONE OF THESE WHEN YOU GOT YOUR BUNKER GEAR OR YOUR TURNOUTS AND YOUR HELMET. YOU WERE ISSUED A HYDRANT KEY WITH A LEATHER HOLSTER BELT THAT YOU WORE OVER TOP OF YOUR JACKET … NOW THERE WAS A FEW ROLES OR A FEW USES FOR THIS TOOL. NUMBER ONE, FIRST AND FOREMOST, IT IS A HYDRANT KEY WHICH MEANS THAT THIS WAS THE KEY THAT YOU USED TO ESSENTIALLY OPEN THE HYDRANT. THE OPENING AT THE END AWAY FROM THE BEVELED EDGE IS CUT IN THE SAME SIZE AND SHAPE AS THE STEM ON TOP OF THE HYDRANT AND IT WAS SIMPLY LEFTY-LOOSE, RIGHTY-TIGHTY. BUT THIS COULD ALSO BE USED AS A FORCIBLE ENTRY TOOL, PERHAPS AS A TOOL TO FIND A MEANS OF EGRESS IF YOU HAPPEN TO BE TRAPPED, YOU COULD BREAK WINDOWS WITH THIS. YOU COULD USE THE PRYING END TO PRY IF YOU HAD TO. I DON’T RECALL WHAT THE PURPOSE OF THE ROUND OPENING ON THAT KIND OF FLANGE END WAS - I DON’T REMEMBER THAT. BUT I DO REMEMBER THAT THERE WAS A SORT OF A MINDSET AMONG SOME OF THE SENIOR MEMBERS THAT IF YOU LET YOUR HYDRANT KEY BECOME ALL RUSTED AND LOOK A LITTLE BIT DISHEVELED THAT THAT WAS SORT OF LIKE THE MARK OF A POOR FIREFIGHTER, SOMEONE THAT DIDN’T LOOK AFTER THEIR GEAR PROPERLY, AND SO WE USED TO – AT TIMES WE WOULD BREAK OUT SOME STEEL WOOL OR THE PNEUMATIC POLISHER AND ACTUALLY POLISH THESE TO A NICE BRIGHT, SILVERY - LIKE A CHROME SHEEN, ALMOST. SO WHEN THEY ISSUED THEM THEY LOOKED TERRIBLE - THEY WERE UNFINISHED AND IT WAS YOUR JOB TO SORT OF GET IT POLISHED UP AND GET IT INTO SERVICE, SO TO SPEAK.” LAZENBY CONTINUED, SAYING THAT BY 2000 “THESE ARE NO LONGER ISSUED TO INDIVIDUAL MEMBERS … WE’VE EVOLVED IN SOME WAYS IN THAT THE HYDRANT KEY NOW TYPICALLY IS … MOUNTED ON THE BACK OF THE TRUCK … THE WHOLE INDUSTRY IS STARTING TO CHANGE IN THAT WE’RE BECOMING MUCH MORE SAFETY-ORIENTED WHEN IT COMES TO THESE TYPES OF THINGS … THIS BECAME REDUNDANT, AND YOU KNOW, IT WAS A LITTLE BIT SMALL FOR THE JOB THAT IT WAS ASKED TO DO AS WELL. OBVIOUSLY, THE BIGGER YOUR TOOL, THE BETTER PRYING AND STRENGTH AND WEIGHT YOU GET. THIS, YOU RELIED A LOT ON THE PERSONAL STRENGTH OF THE PERSON TO BE ABLE TO USE THIS EFFECTIVELY … WHEREAS WITH THE BIGGER ONES NOW, THEY’RE HEAVIER, THEY’RE A LITTLE BIT LONGER, YOU CAN JUST GET BETTER LEVERAGE NATURALLY.” PETIT AGREED, ADDING THAT HE BELIEVED THE WRENCH “WAS MADE IN LETHBRIDGE. MAYBE LETHBRIDGE IRON WORKS.” DZUREN EXPLAINED THAT THE WRENCH “WAS CARRIED IN A LEATHER HOLSTER TYPE OF THING THAT HUNG AT YOUR SIDE AND IT WAS ONE OF THE THINGS YOU PUT ON RIGHT AWAY, AS SOON AS YOU PUT ON YOUR TURN OUT GEAR … THAT WOULD BE THERE BECAUSE YOU WOULD NEED THAT TO TURN ON YOUR FIRE HYDRANT IF YOU NEEDED THE HYDRANT FOR WATER … AND IT ALSO HAD, THERE WAS A LITTLE, TINY, THE TOP OF THE KEY THERE WAS A LITTLE ROUND THING THAT WAS THERE TO TIGHTEN THE CUP LINKS ON HOSES, IF YOU HAD TO TIGHTEN A HOSE THAT WAS LEAKING.” SEE PERMANENT FILE FOR FULL INTERVIEW TRANSCRIPTS AND ADDITIONAL INFORMATION ABOUT THE LETHBRIDGE FIRE DEPARTMENT.
Catalogue Number
P20150010011
Acquisition Date
2015-02
Collection
Museum
Images
Less detail

7 records – page 1 of 1.