Skip header and navigation

12 records – page 1 of 1.

Other Name
OFFICE DESK
Date Range From
1910
Date Range To
1997
Material Type
Artifact
Materials
OAK, NEWSPAPER, MOTHER-OF-PEARL
Catalogue Number
P20110027000
  1 image  
Material Type
Artifact
Other Name
OFFICE DESK
Date Range From
1910
Date Range To
1997
Materials
OAK, NEWSPAPER, MOTHER-OF-PEARL
No. Pieces
1
Height
76.4
Length
167.8
Width
86.4
Description
DESK, OAK WITH MOTHER-OF-PEARL CALL BUTTONS ON TOP FRONT RIGHT CORNER. TOP SURFACE HAS: WORN FINISH, AREA OF DARK BLACK STAINING NEAR FRONT CENTER, AND WATER DAMAGE CAUSING WOOD TO SPLIT AT THREE PLACES ON RIGHT SIDE. SEVEN DRAWERS, WITH THREE ON LEFT, THREE ON RIGHT AND ONE AT CENTER. DRAWER FACES HAVE BEVELED EDGES AND WOODEN HANDLES. BOTTOM TWO DRAWERS ON RIGHT, BOTTOM DRAWER ON LEFT AND CENTER DRAWER HANDLES HAVE CHUNKS OF WOOD MISSING. LEFT SIDE OF CENTER DRAWER HAS WHITE PAINT. LOCKING MECHANISMS AT TOP RIGHT, CENTER AND LEFT DRAWERS. ABOVE DRAWERS AT LEFT AND RIGHT ARE PULL OUT BOARDS. SIDES AND REVERSE OF DESK HAVE PANELED WOOD. RIGHT SIDE HAS FRAGMENT OF CORD EXTENDING FROM THE EDGE OF CALL BUTTONS. TOP DRAWER ON RIGHT HAS THREE LOOSE WOODEN SEPARATORS, ONE IN RIGHT MIDDLE AND ONE IN LEFT MIDDLE. SPILLED INK HAS STAINED THE BOTTOM OF TOP LEFT DRAWER INSIDE. FRAGMENT OF NEWSPAPER ON THE UNDERSIDE OF TOP CENTER DRAWER HAS, “FRIDAY, MAY 23, 1913.”
Subjects
FURNITURE
Historical Association
SAFETY SERVICES
FURNISHINGS
PROFESSIONS
History
DESK BELONGED TO DONOR’S FATHER JERRY YAMAMOTO WHO PASSED AWAY ON OCTOBER 11, 1997. IN MAY 2012, COLLECTIONS TECHNICIAN KEVIN MACLEAN INTERVIEWED DONOR TERRY YAMAMOTO. THE FOLLOWING INFORMATION WAS EXTRACTED FROM THE INTERVIEW’S TRANSCRIPTION. WHEN ASKED ABOUT HIS FIRST MEMORY OF THE DESK, YAMAMOTO RESPONDED BY SAYING, “WELL… IT GOES BACK TO WHEN I WAS ABOUT ELEVEN YEARS OLD. MY DAD BUILT THE HOUSE, HE BUILT IT ON HIS OWN AND THE FIRST YEAR WE MOVED IN THERE I WAS ELEVEN LIKE WE LIVED IN THE BASEMENT WHILE HE BUILT THE UPSTAIRS. AS FAR AS I CAN REMEMBER THAT DESK HAS BEEN THERE SINCE THE TIME WE MOVED IN SO I WAS ELEVEN SO THAT WOULD BE 1963. IT WAS IN WHAT WE CALLED HIS RADIO ROOM. HE WAS A RADIO TECHNICIAN FOR THE RCMP AND HE JUST HAD IT SET IN THERE FOR HIS MUSIC AS A DESK. YEAH, HE DID YOU KNOW WELL HE FIXED RADIOS HE WAS A RADIO TECH FOR THE RCMP SO HE WOULD TINKER AROUND FIXING RADIOS AND THINGS LIKE THAT. HE WAS ALSO A HAM OPERATOR. [FOR] AS LONG AS I CAN REMEMBER HE WAS WITH THE RCMP. I WAS BORN IN ‘52, 1952 SO IT HAD TO BE AROUND THAT TIME OR AFTER THAT HE JOINED THE RCMP BECAUSE AS LONG AS I CAN REMEMBER HE ALWAYS WORKED WITH THEM. HE STARTED OUT AS OPERATING RADIOS THEN JUST WENT ON COURSES AND WHATEVER WITH THE RCMP AND THEN HE BECAME THE RADIO TECHNICIAN FOR SOUTHERN ALBERTA. [WHEN HE STARTED, HE WAS DOING] THE RADIO TRANSMISSION WITH EVERY COP IN THE CARS. AND BASICALLY THE RCMP SENT HIM BACK AND PUT HIM ON TRAINING FOR RADIO TECHNICIAN AND HE WAS WITH THEM UNTIL HE RETIRED. HE LIKED IT BECAUSE HE SERVICED NOT ONLY THE CAR RADIOS BUT ALL THE RADIO TOWERS FOR SOUTHERN ALBERTA. THE ONE THING HE REALLY ENJOYED WAS HE HAD RETIRED AND THEN WHEN THE OLYMPICS CAME, THE SKIING, THE WORLD CUP IN 1980, SECURITY OR WHATEVER. THE RCMP SENT HIM OUT TO OTTAWA ON A SPECIAL, BROUGHT HIM OUT OF RETIREMENT, SENT HIM TO OTTAWA FOR A SPECIAL COURSE AND THEN HE HAD TO HE WAS UP AT LAKE LOUISE AND BANFF AND THEY WERE DOING ALL THE SECURITY ON THE TOWERS AND EVERYTHING.” WHEN ASKED IF SHE REMEMBERED ANY OF THE HISTORY OF THE DESK BEFORE HIS FATHER’S USE, YAMAMOTO SAID, “ALL I REMEMBER IS HIM SAYING IS THAT IT CAME FROM THE FORT MACLEOD RCMP BARRACKS AND HIM AND JUDGE GORE-HICKMAN HAD COLLECTED WEIRD THINGS. BUT ANYWAYS IT HAD SOMETHING TO DO WITH JUDGE GORE-HICKMAN SO I DON’T IF HE ACTUALLY HAD IT IN THE BEGINNING AND GAVE IT MY DAD TOOK IT BUT IT DID ACTUALLY COME FROM THE FORT MACLEOD RCMP BARRACKS. [MY FATHER] AND JUDGE GORE-HICKMAN WERE FRIENDS OF A DIFFERENT KIND AND LIKE I SAY THEY COLLECTED WEIRD THINGS.” WHEN ASKED ABOUT THE DAMAGE ON THE TOP SURFACE OF THE DESK, YAMAMOTO EXPLAINED, “YEAH, THAT WAS PROBABLY MY FAULT, I WAS USING IT FOR MY BEDDING PLANTS AND IT GOT SPRAYED WITH WATER. YOU KNOW I HAD THEM SITTING THERE I HAD A BOARD OVER TOP FOR A WHILE THERE.” ACCORDING TO INFORMATION PROVIDED BY KIM GUNN AND FORWARDED BY TOM EDGAR IN AN E-MAIL AT THE TIME OF DONATION, “THE DESK IS AN OLD RCMP DESK THAT WAS STANDARD ISSUE TO RCMP OFFICES ACROSS CANADA. WHEN THE RCMP GOT NEW DESKS IT WAS GIVEN TO DR. GORE-HICKMAN’S DAD FOR USE IN HIS OFFICE AT THE OLD POLICE STATION ON 5TH STREET. GORDIE REMEMBERS JERRY Y. AND THE DESK BEING IN HIS DAD’S OFFICE. HE SAYS HIS DAD AND JERRY WERE GOOD FRIENDS. GORDIE SAYS THAT HIS DAD STARTED OUT AS A POLICE MAGISTRATE AND THAT IS WHY HIS OFFICE WAS AT THE POLICE STATION.” *UPDATE* AT THE TIME OF CATALOGUING IN AUGUST, 2013, COLLECTIONS ASSISTANT DAVID SMITH DISCOVERED SOME ARCHIVAL DOCUMENTS IN THE TOP CENTER DRAWER. UPON CONSULTATION WITH DONOR, THESE DOCUMENTS WERE TRANSFERRED TO GALT ARCHIVES. FOR MORE INFORMATION, PLEASE SEE PERMANENT FILE.
Catalogue Number
P20110027000
Acquisition Date
2011-07
Collection
Museum
Images
Less detail
Other Name
LETHBRIDGE POLICE
Date Range From
1960
Date Range To
1970
Material Type
Artifact
Materials
RUBBER, PLEXIGLASS, STEEL.
Catalogue Number
P19960112055
  2 images  
Material Type
Artifact
Other Name
LETHBRIDGE POLICE
Date Range From
1960
Date Range To
1970
Materials
RUBBER, PLEXIGLASS, STEEL.
No. Pieces
1
Height
14
Length
37.5
Width
22.5
Description
GREEN RUBBER GAS MASK WITH A PLEXIGLASS MASK AND A DETACHABLE OXYGEN CAN ATTACHED BELOW THE VENT ON MASK MARKED "CHIN TYPE CANNISTER", "FOR USE WITH SMITH & WESSON CHEMICAL CO.", AND MORE. "MSA" ON PLATE ABOVE MASK. STRAPS ON BACK MARKED "MINE SAFETY APPLIANCES CO.". PAINT ON CANISTER IS CHIPPING, BUT OTHERWISE MASK IS IN VERY GOOD CONDITION.
Subjects
REGULATIVE & PROTECTIVE T&E
Historical Association
SAFETY SERVICES
History
POSSIBLY USED BY CITY POLICE SWAT TEAM OR THE RIOT SQUAD WHEN TEAR GAS WAS USED. *UPDATE* IN 2014 COLLECTIONS ASSISTANT JANE EDMUNDSON CONDUCTED A SURVEY OF ART OBJECTS, INCLUDING SOME DONATED BY THE CITY OF LETHBRIDGE POLICE SERVICES. FOR A BRIEF ACCOUNT OF THE LETHBRIDGE POLICE COLLECTION, SEE RECORD P19960112001. FOR FURTHER INFORMATION ABOUT THE CITY OF LETHBRIDGE POLICE SERVICES AND TRANSCRIPTS OF INTERVIEWS AND CORRESPONDENCE WITH CURRENT AND FORMER LETHBRIDGE POLICE, SEE PERMANENT FILE P19960112000.
Catalogue Number
P19960112055
Acquisition Date
1996-12
Collection
Museum
Images
Less detail
Other Name
C/W CASE
Date Range From
1955
Date Range To
1965
Material Type
Artifact
Materials
LEATHER, BRASS, RUBBER
Catalogue Number
P19641365000
Material Type
Artifact
Other Name
C/W CASE
Date Range From
1955
Date Range To
1965
Materials
LEATHER, BRASS, RUBBER
No. Pieces
2
Height
14.0
Length
31.8
Width
23.5
Description
.1 CASE. ABOVE DIMENSIONS. LEATHER, BRASS, STEEL, MASONITE. LEATHER CARRYING HANDLE. MASONITE CASE. STEEL-BOUND EDGES. STAMPMARK ON EACH CLASP "CORBIN MADE IN U.S.A." UNDERNEATH BLACK PAINT ON FRONT. "MCNABB" AND "FULTON". "4" PAINTED WHITE ON TOP. .2 GAS MASK (SET). 15.2 CM HT. X 6.3 CM WTH. X 63.5 CM X 2.5 CM DIA. RUBBER, STEEL, GLASS, TIN. "SCOTT LANCASTER, NEW YORK, U.S.A.: CIRCLE WITH C IN MIDDLE" ON BACK OF MASK. PAPER LABEL ON FRONT OF CANISTER, GIVING DETAILED INSTRUCTIONS OF THE CANISTER "MINE SAFETY APPLIANCE COMPANY PITTSBURGH, PENNA MADE IN U.S.A. U.S.A. PATENTS 1,586,327 - 1,787,875". PAPER LABEL ON BACK. DIRECTIONS ON SHELF LIFE AND STORAGE... "JAN. 17, 56" SCRATCHED ON LID.
Subjects
REGULATIVE & PROTECTIVE T&E
Historical Association
SAFETY SERVICES
History
USED BY LETHBRIDGE FIRE DEPARTMENT IN FIRE FIGHTING OPERATIONS
Catalogue Number
P19641365000
Acquisition Date
1964-12
Collection
Museum
Less detail
Other Name
RADAR GUN
Date Range From
1960
Date Range To
1985
Material Type
Artifact
Materials
METAL, PLASTIC, LEATHER
Catalogue Number
P20030028000
Material Type
Artifact
Other Name
RADAR GUN
Date Range From
1960
Date Range To
1985
Materials
METAL, PLASTIC, LEATHER
No. Pieces
7
Height
22
Length
41
Width
29.5
Description
(1) STORAGE BOX- MEASUREMENTS ABOVE, BLACK HARD CASE WITH TWO LATCHES, THREE INTERIOR COMPARTMENTS LINED WITH FOAM. (1) CONTROL UNIT: 15.6", 23.1", 12.5" -GREEN METAL, FRONT CONTAINS PLEXIGLAS COVERED SPEEDOMETER "0 TO 100 MILES PER HOUR", BACK LABEL "STEPHENSON RADAR MODEL 700 SERIAL NO. 1912." (2) CIGARETTE LIGHTER ADAPTER - BLACK CABLE LENGTH-96.4", 2ND CORD LENBGTH-361", 12V ADAPTER ON ONE END, AMPHENOL TWO HOLE RECEIVER ON OTHER END. SIMILAR ENDS ON EACH CORD (1) HAND HELD ACTIVATION BUTTON WITH CABLE: LENGTH184.5", BLACK UNIT WITH BLACK BUTTON "SA-26/U ROLA" (1) ANTENNA WITH CABLE-128.5" X 16.5" X LENGTH OF CABLE-421", ANTENNA VINTAGE HEADLIGHT SHAPE CHROME FINISH, BOTTOM SERIAL NO. "1912." (1) METAL MOUNT FOR HEAD UNIT, SILVER 'C' BRACKET
Subjects
REGULATIVE & PROTECTIVE T&E
Historical Association
SAFETY SERVICES
History
STEPHENSON MODEL 700 RADAR UNIT, ACQUIRED BY INFRASTRUCTURE SERVICES DEPT. FROM THE LETHBRIDGE POLICE APPROXIMATELY FIFTEEN TO EIGHTEEN YEARS AGO. POLICE SGT. ZACHUK IS THOUGHT TO HAVE TRANSFERRED THE GUN TO INFRASTRUCTURE. INFRASTRUCTURE USED GUN, MOUNTED INSIDE A CAR, IN ORDER TO CONDUCT SPEED STUDIES AND TO MONITOR TRAFFIC. DEPARTMENT PERSONNEL WHO USED GUN INCLUDED ROBERT STANTON AND BRIAN JOHNSON. GUN WAS REPLACED TEN TO TWELVE YEARS AGO BY A MODEL THAT WAS HAND HELD AND EASIER TO USE. DONATED GUN WAS STORED UNTIL RECENT IN A FILE CABINET IN ONE OF INFRASTRUCTURE'S OFFICES. OTHER POLICE MEMBERS CLAIMED TO HAVE USED THE GUN INCLUDE "WHEPLY, DON LEE, KOLPAK, ST. ONGE, MOLINE AND WIER". RADAR GUN WAS FIRST AND SOLE DETECTOR TO MONITOR TRAFFIC IN EARLY 1950s. SPEED GAUGE UNIT MOUNTED TO DASH OF CAR AND RADAR LAMP MOUNTED ON WINDOW. A HAND HELD BUTTON WAS PUSHED TO ACTIVATE DETECTOR AND AGAIN TO RESET. AT TIME, SPEEDING TICKETS RANGED BETWEEN TEN AND FIFTEEN DOLLARS. EXCESSIVE SPEEDING AND FAILING TO STOP RESULTED IN COURT APPEARANCES AND FINES OF UP TO ONE THOUSAND DOLLARS. TECHNOLOGY DEVELOPED MAKING THIS MODEL OBSOLETE.
Catalogue Number
P20030028000
Acquisition Date
2004-01
Collection
Museum
Less detail
Other Name
ATTIC LADDER
Date Range From
1960
Date Range To
2010
Material Type
Artifact
Materials
METAL, RUBBER
Catalogue Number
P20150010022
  2 images  
Material Type
Artifact
Other Name
ATTIC LADDER
Date Range From
1960
Date Range To
2010
Materials
METAL, RUBBER
No. Pieces
1
Height
314.2
Length
4.9
Width
33.5
Description
ADJUSTABLE LADDER, SIDE RAILS COME TOGETHER TO MAKE THE LADDER MORE COMPACT (LADDER IS ONLY 8.0CM WIDE WHEN THE SIDE RAILS ARE TOGETHER). SILVER COLOURED METAL, WITH ORANGE PAINT, BLACK RUBBER, AND EIGHT RUNGS. ANTI-SLIP SAFETY SHOE ON THE BOTTOM OF BOTH SIDE RAILS. SAFETY SHOE IS BLACK RUBBER ON THE BOTTOM, WITH A PATTERN OF 10 CIRCLES PER SHOE BOTTOM. METAL TEETH ON THE FRONT OF THE SHOE. SHOES ARE ADJUSTABLE, BUT ARE VERY STIFF. BRACE COMES UP FROM THE BOTTOM AND LOCKS TO PREVENT LADDER RAILS FROM COLLAPSING BACK TOGETHER. BOTTOM OF LADDER HAS A 54.5CM SECTION OF BRIGHT ORANGE PAINT AND TOP HAS A 46.0CM SECTION OF BRIGHT ORANGE PAINT. TOP OF ONE RAIL HAS A BLACK RUBBER TOPPER. SMALL BLACK STICKER AT BOTTOM “P1” WITH SEVERAL STICKERS ON THE OPPOSITE RAIL: A ROUGHLY OVAL SHAPED, RED, BLACK, AND SILVER STICKER: “THIS IS A DUO-SAFETY LADDER. DUO-SAFETY LADDER CORP 519 W 9TH AVE. OSHKOSH, WIS.”; THEN A RECTANGULAR RED STICKER WITH WHITE WRITING: “THIS LADDER IS CERTIFIED TO COMPLY WITH N.F.P.A. SPEC 1931-1832; CURRENT EDITION, FOR FIRE DEPARTMENT GROUND LADDERS AND OSHA FIRE LADDER REQUIREMENTS. REFER TO DUO-SAFETY LADDER SAFETY BOOK FOR CARE – USE – MAINTENANCE ON THIS LADDER. DUO-SAFETY LADDER CORP. OSHKOSH, WI 54901”; THEN A WHITE STICKER WITH GOLD WRITING: “10”. THERE IS ALSO A SILVER COLOURED STICKER WITH HANDWRITING ON THIS SAME RAIL, LOCATED BETWEEN THE FIRST AND SECOND RUNGS: “TEST DATE: 25 NOV 2006. LADDER #: ATTIC #18. APPARATUS #: P1. APPARATUS #: P1.” BOTH RAILS HAVE THE FOLLOWING STICKERS, AT ROUGHLY THE MID-POINT OF THE LADDER: RECTANGULAR, WHITE BACKGROUND, BLUE BORDER, BLACK WRITING: “DANGER. FAILURE TO USE, UNDERSTAND, AND FOLLOW PROPER LADDER USAGE INSTRUCTIONS AS MADE AVAILABLE BY DUO-SAFETY LADDER, N.F.P.A., I.S.F.S.I., A.N.S.I., O.S.H.A., ETC. COULD CAUSE SERIOUS INJURY AND/OR DEATH.” RECTANGULAR, WHITE BACKGROUND, BLACK BORDER AND WRITING: “DANGER. WATCH FOR WIRES. THIS LADDER CONDUCTS ELECTRICITY.” RECTANGULAR, YELLOW, WITH BLACK WRITING: CAUTION. SET UP LADDER PROPERLY TO REDUCE SLIP AND OVERHEAD HAZARDS. FOLLOW THESE INSTRUCTIONS. 1. PLACE TOES AGAINST BOTTOM OF LADDER SIDE RAILS. 2. STAND ERECT. 3. EXTEND ARMS STRAIGHT OUT. 4. PALMS OF HANDS SHOULD TOUCH TOP OF RUNG AT SHOULDER LEVEL. OUT -->” STICKER ON THE INSIDE OF FOURTH RUNG FROM THE BOTTOM: WHITE BACKGROUND, BLACK WRITING: “REMOVE LADDER FROM SERVICE AND TEST IF ANY HEAT SENSOR TURNS DARK -->” LADDER IS IN GOOD OVERALL CONDITION. ADJUSTABLE FEET ARE VERY STIFF. LOTS OF SCUFF MARKS ALL OVER LADDER AND SOME STICKERS HAVE BEEN PARTIALLY REMOVED/SCRATCHED.
Subjects
REGULATIVE & PROTECTIVE T&E
Historical Association
SAFETY SERVICES
History
THIS ATTIC LADDER WAS USED BY THE LETHBRIDGE FIRE DEPARTMENT. IN A WRITTEN STATEMENT PROVIDED AT THE TIME OF DONATION, JESSE KURTZ, DEPUTY CHIEF – SUPPORT SERVICES (RETIRED), EXPLAINED THAT THE LADDER WAS “USED TO ACCESS ATTIC SPACES THROUGH SMALL ACCESS HOLES IN CEILINGS. USED WHEN WE DID NOT WANT TO PULL A CEILING DOWN AFTER A FIRE TO ENSURE THAT THE FIRE IN THE ATTIC WAS OUT.” HE CONTINUED SAYING THAT THIS LADDER WAS DECOMMISSIONED BECAUSE IT IS “OLD AND WORN OUT. ALL LADDERS MUST MEET MINIMUM ACCEPTANCE STANDARDS.” IN THE SUMMER OF 2015, COLLECTIONS TECHNICIAN KEVIN MACLEAN, CONDUCTED A SERIES OF INTERVIEWS WITH CURRENT AND FORMER MEMBERS OF THE FIRE DEPARTMENT, INCLUDING: CLIFF “CHARLIE” BROWN (HIRED IN 1966, RETIRED 2004), TREVOR LAZENBY (HIRED IN 1994), AND LAWRENCE DZUREN (HIRED 1959, RETIRED 1992). BROWN EXPLAINED THAT THIS IS “WHAT WE CALL A LITTLE ATTIC LADDER, TO GET BACK INTO A TIGHT PLACE WHERE YOU COULDN’T BRING A BIG LADDER IN … YOU COULD GET IT UP INTO THE ATTIC SO YOU COULD CHECK WHAT WAS IN THE ATTIC.” LAZENBY ELABORATED: “THIS IS A FOLDING ATTIC LADDER … THE RUNGS THAT SEPARATE THE TWO BEAM SECTIONS ARE ACTUALLY HINGED IN NATURE AND SO IT FOLDS UP AND FITS IN, TYPICALLY, A LITTLE COMPARTMENT ON THE BACK END OF THE TRUCK BECAUSE HAVE SOME LONG, LATERAL STORAGE THERE. THESE SURPRISINGLY GET USED A FAIR AMOUNT, STILL.” HE CONTINUED SAYING “THEY’RE NARROW ENOUGH THAT THEY’RE ALMOST DIFFICULT TO CLIMB WITH YOUR BIG FIRE BOOTS ON.” LAZENBY EXPLAINED THAT THE LADDERS IN USE PRESENTLY ARE VERY SIMILAR TO THIS MODEL: “YOU CAN TELL BY LOOKING AT IT IT’S AN OLDER PIECE BUT THE CONSTRUCTION IS ESSENTIALLY THE SAME. THEY MIGHT BE USING SLIGHTLY LIGHTER MATERIALS NOW, BUT FROM WHAT I CAN SEE, THEY’RE BASICALLY THE SAME.” HE ADDED THAT HE WAS OFTEN THE ONE USING THE LADDER: “BECAUSE I WAS NEVER ONE OF THE BIGGER GUYS ON THE JOB, AND ESPECIALLY WHEN I STARTED I WAS PROBABLY TWENTY POUNDS LIGHTER THAN I AM NOW, IF THEY NEEDED SOMEONE TO GET INTO A SMALLER SPACE, I WAS THAT GUY, TYPICALLY, BECAUSE WHEN YOU WEIGHT 250 [POUNDS] AND YOU THROW THE SCBA ON AND ALL THE EQUIPMENT, IT’S DEFINITELY TOUGH FOR SOME OF THOSE GUYS TO GET THROUGH THAT ACCESS. SO, YES, I’VE BEEN IN MY FAIR SHARE OF ATTICS AND THAT’S THE ONLY MEANS TO GET UP THERE.” LAZENBY EXPLAINED THE IMPORTANCE OF USING THE LADDER: “ANY TIME A FIRE VENTS OUT OF A WINDOW AND TOUCHES ANY PART OF THE SOFFIT, IT’S INCUMBENT THAT YOU HAVE TO ABSOLUTELY CHECK THAT BECAUSE IF YOU DON’T AND YOU’RE OPERATING UNDERNEATH AN ATTIC FIRE, THAT’S A VERY, VERY UNSAFE PLACE TO BE.” DZUREN ADDED: “THAT’S A COLLAPSIBLE LADDER. IT’S KIND OF LIKE A SCISSOR TYPE OF LADDER. IT WAS VERY COMPACT, YOU COULD STORE IT ON ONE OF YOUR VEHICLES WITHOUT IT TAKING UP TOO MUCH ROOM … YOU’D CARRY THAT INTO YOUR HOUSE IF AN OFFICER WANTED YOU TO GO UP INTO AN ATTIC … IT WAS EASY TO TRANSPORT AND ONCE YOU GOT IT INTO THE OPENING YOU COULD JUST GIVE IT A SWITCH AND IT WOULD OPEN UP AND YOU COULD JUST CLIMB RIGHT UP TO THE SPOT THERE.” SEE PERMANENT FILE FOR FULL INTERVIEW TRANSCRIPTS AND ADDITIONAL INFORMATION ABOUT THE LETHBRIDGE FIRE DEPARTMENT.
Catalogue Number
P20150010022
Acquisition Date
2015-02
Collection
Museum
Images
Less detail
Other Name
HIGH VOLUME FIRE HOSE / PUMP LENGTH HOSE
Date Range From
1955
Date Range To
1985
Material Type
Artifact
Materials
NYLON, BRASS, RUBBER,
Catalogue Number
P20150010021
  2 images  
Material Type
Artifact
Other Name
HIGH VOLUME FIRE HOSE / PUMP LENGTH HOSE
Date Range From
1955
Date Range To
1985
Materials
NYLON, BRASS, RUBBER,
No. Pieces
1
Length
416.0
Width
38.3
Diameter
17.5
Description
SHORT HIGH VOLUME FIRE HOSE, ALSO KNOW AS PONY LENGTH OR PUMP LENGTH FIRE HOSE. SHORT, WIDE, RED FIRE HOSE. COUPLINGS ON EACH END OF HOSE. ON THE LARGER END (17.5CM DIAMETER) THE CHROME PLATED COUPLING HAS 10.4CM LONG HANDLES AND A STRIPE OF GREEN PAINT NEAR THE CONNECTION WITH THE HOSE. THE HOSE HAS BEEN TRIPLE CLAMPED ONTO THE COUPLING. ON THE OTHER END OF THE HOSE, THE DIAMETER IS 14.0CM, AND THE COUPLING HAS HANDLES THAT ARE 4.7CM LONG. THIS END OF THE HOSE IS ALSO TRIPLE CLAMPED ONTO THE COUPLING. ON EACH END OF THE HOSE, TWO OF THE CLAMPS ARE SMALLER AND ARE STAMPED WITH A REPEATING "* DENVER * COLORADO * USA * BAND * IT *" THE LARGEST CLAMPS, EACH FURTHEST FROM ITS RESPECTIVE COUPLING, STAMPED: "DIXON V. & C. CO. USA 525" ON EITHER SIDE OF THE TWO LARGE BOLT SETS. VERY GOOD OVERALL CONDITION. CHROME PLATING HAS WORN AWAY ON EDGES. LOTS OF SCRATCHES AND GOUGES IN THE METAL HANDLES OF THE COUPLINGS.
Subjects
REGULATIVE & PROTECTIVE T&E
Historical Association
SAFETY SERVICES
History
THIS HIGH VOLUME FIRE HOSE WAS USED BY THE LETHBRIDGE FIRE DEPARTMENT. IN A WRITTEN STATEMENT PROVIDED AT THE TIME OF DONATION, JESSE KURTZ, DEPUTY CHIEF – SUPPORT SERVICES (RETIRED), EXPLAINED THAT THIS HOSE WAS USED “WHEN A FIRE ENGING NEEDED TO CONNECT TO A FIRE HYDRANT AND WAS PARKED RIGHT BESIDE THE HYDRANT. THIS WAS BEFORE WE CARRIED LARGER BUT LIGHTER HOSES ON THE TRUCKS.” IN THE SUMMER OF 2015, COLLECTIONS TECHNICIAN KEVIN MACLEAN, CONDUCTED A SERIES OF INTERVIEWS WITH CURRENT AND FORMER MEMBERS OF THE FIRE DEPARTMENT, INCLUDING: CLIFF “CHARLIE” BROWN (HIRED IN 1966, RETIRED 2004), TREVOR LAZENBY (HIRED IN 1994), AND LAWRENCE DZUREN (HIRED 1959, RETIRED 1992). BROWN EXPLAINED THAT “THIS WAS ONE OF YOUR MAIN PIECES OF EQUIPMENT WHEN YOU WENT TO A FIRE … WE’D HOOK THIS [THE HOSE] TO THE HYDRANT, AND THEN THIS INTO OUR PUMP, SO WE’D BE GETTING 8 INCHES OF WATER INTO OUR PUMP, AND THEN THE PUMP WOULD BOOST THAT LINE, AND WE COULD PUT UP 5 OR 6 LINES … THIS WAS ONLY USED AT LARGE FIRES … WHEN WE HAD TO USE THIS, THERE WAS BIG TROUBLE.” LAZENBY ADDED: “IF THIS WAS IN SERVICE WITH OUR DEPARTMENT, THIS WAS IN SERVICE BEFORE I GOT ON, SO I DON’T KNOW THAT I’VE EVEN EVER ACTUALLY SEEN ONE OF THESE, TO BE HONEST WITH YOU.” DZUREN ELABORATED: “THAT’S WHAT WE WOULD HOOK UP ONTO FROM OUR HYDRANT TO THE PUMP. THE HYDRANT MAN, HE WOULD CONNECT THAT TO THE HYDRANT GATE, TO THE HYDRANT, AND THIS WOULD GO TO THE INPUT SIDE OF THE PUMPER. AND THEN THEY WOULD TURN ON THE WATER WITH THAT NOZZLE AND THEY WOULD SUPPLY WATER TO THE FIRE TRUCK AND HE COULD PUMP IT TO A MULTITUDE OF LINES THAT COME OFF OF THERE.” WHEN ASKED WHY FIREFIGHTERS WOULD WANT TO RUN THE WATER THROUGH THE PUMPER TRUCK, RATHER THAN JUST OFF THE HYDRANT, DZUREN EXPLAINED: “WELL, IF THE HYDRANT PRESSURE IS NOT HIGH ENOUGH TO ACCOMMODATE FIREFIGHTING, LIKE SAY IF OUR HOSE, IF A NOZZLE LIKE THAT, YOU’VE GOT TO HAVE UP TO A HUNDRED POUNDS IN THERE, A HYDRANT NORMALLY DOESN’T HAVE THAT KIND OF HIGH PRESSURE.” SEE PERMANENT FILE FOR FULL INTERVIEW TRANSCRIPTS AND ADDITIONAL INFORMATION ABOUT THE LETHBRIDGE FIRE DEPARTMENT.
Catalogue Number
P20150010021
Acquisition Date
2015-02
Collection
Museum
Images
Less detail
Other Name
HYDRANT WRENCH
Date Range From
1950
Date Range To
2000
Material Type
Artifact
Materials
METAL
Catalogue Number
P20150010011
  2 images  
Material Type
Artifact
Other Name
HYDRANT WRENCH
Date Range From
1950
Date Range To
2000
Materials
METAL
No. Pieces
1
Length
42.5
Width
14.7
Description
METAL HYDRANT WRENCH, NOT ADJUSTABLE. WRENCH IS ROUGHLY AN 'L' SHAPE. ONE END OF THE WRENCH HAS A SINGLE CLAW, USED FOR PRYING. THE OPPOSITE END (THE SHORT END OF THE 'L') HAS A REULEAUX TRIANGLE, A SLIGHT HOOK, AND A SMALL (2.5CM) CIRCLE. IN THE MIDDLE OF THE HANDLE, ON ONE SIDE ONLY, IS A RECTANGULAR PATCH OF LIGHT GREY PAINT. THERE ARE REMNANTS OF LIGHT GREY FINISH ON THE REST OF THE WRENCH. OVERALL IN FAIR CONDITION. VERY RUSTED. GREY FINISH HAS ALMOST ENTIRELY FLAKED OFF. THE RECTANGULAR AREA OF GREY FINISH IS LOOSE.
Subjects
REGULATIVE & PROTECTIVE T&E
Historical Association
SAFETY SERVICES
History
THIS FIRE PLUG WRENCH, OR HYDRANT WRENCH, WAS USED BY THE LETHBRIDGE FIRE DEPARTMENT. IN THE SUMMER OF 2015, COLLECTIONS TECHNICIAN KEVIN MACLEAN, CONDUCTED A SERIES OF INTERVIEWS WITH CURRENT AND FORMER MEMBERS OF THE FIRE DEPARTMENT, INCLUDING: CLIFF “CHARLIE” BROWN (HIRED IN 1966, RETIRED 2004), TREVOR LAZENBY (HIRED IN 1994), RAYMOND “RAY” PETIT (HIRED 1965, RETIRED 1998), AND LAWRENCE DZUREN (HIRED 1959, RETIRED 1992). ACCORDING TO BROWN THIS IS A “GOOD OLD HYDRANT KEY. WE ALL CARRIED ONE ON OUR BELT … IT WAS MADE OF PRETTY DURABLE STEEL. YOU COULD PRY ON THAT THING ALL YOU WANTED. I DON’T EVER REMEMBER ONE BREAKING. YOU COULD USE IT AS A HAMMER, AS A CLUB. WE ALWAYS JOKED – WE’D USE IT AS A WEAPON IF WE EVER GOT INTO TROUBLE WITH OTHER PEOPLE. IT NEVER HAPPENED – JUST A JOKE. IT WAS PROBABLY YOUR MAIN LINE TOOL, BREAK WINDOWS, BREAK DOORS IN. YOU KNOW, WE DIDN’T HAVE A WHOLE LOT OF REAL FANCY TOOLS IN THOSE DAYS BUT THAT HYDRANT KEY WAS VERY IMPORTANT TO US. WE CARRIED THEM ON OUR HYDRANT BELTS.” LAZENBY EXPANDED: “WHEN I WAS HIRED EVERY MEMBER OF THE DEPARTMENT WAS ISSUED ONE OF THESE WHEN YOU GOT YOUR BUNKER GEAR OR YOUR TURNOUTS AND YOUR HELMET. YOU WERE ISSUED A HYDRANT KEY WITH A LEATHER HOLSTER BELT THAT YOU WORE OVER TOP OF YOUR JACKET … NOW THERE WAS A FEW ROLES OR A FEW USES FOR THIS TOOL. NUMBER ONE, FIRST AND FOREMOST, IT IS A HYDRANT KEY WHICH MEANS THAT THIS WAS THE KEY THAT YOU USED TO ESSENTIALLY OPEN THE HYDRANT. THE OPENING AT THE END AWAY FROM THE BEVELED EDGE IS CUT IN THE SAME SIZE AND SHAPE AS THE STEM ON TOP OF THE HYDRANT AND IT WAS SIMPLY LEFTY-LOOSE, RIGHTY-TIGHTY. BUT THIS COULD ALSO BE USED AS A FORCIBLE ENTRY TOOL, PERHAPS AS A TOOL TO FIND A MEANS OF EGRESS IF YOU HAPPEN TO BE TRAPPED, YOU COULD BREAK WINDOWS WITH THIS. YOU COULD USE THE PRYING END TO PRY IF YOU HAD TO. I DON’T RECALL WHAT THE PURPOSE OF THE ROUND OPENING ON THAT KIND OF FLANGE END WAS - I DON’T REMEMBER THAT. BUT I DO REMEMBER THAT THERE WAS A SORT OF A MINDSET AMONG SOME OF THE SENIOR MEMBERS THAT IF YOU LET YOUR HYDRANT KEY BECOME ALL RUSTED AND LOOK A LITTLE BIT DISHEVELED THAT THAT WAS SORT OF LIKE THE MARK OF A POOR FIREFIGHTER, SOMEONE THAT DIDN’T LOOK AFTER THEIR GEAR PROPERLY, AND SO WE USED TO – AT TIMES WE WOULD BREAK OUT SOME STEEL WOOL OR THE PNEUMATIC POLISHER AND ACTUALLY POLISH THESE TO A NICE BRIGHT, SILVERY - LIKE A CHROME SHEEN, ALMOST. SO WHEN THEY ISSUED THEM THEY LOOKED TERRIBLE - THEY WERE UNFINISHED AND IT WAS YOUR JOB TO SORT OF GET IT POLISHED UP AND GET IT INTO SERVICE, SO TO SPEAK.” LAZENBY CONTINUED, SAYING THAT BY 2000 “THESE ARE NO LONGER ISSUED TO INDIVIDUAL MEMBERS … WE’VE EVOLVED IN SOME WAYS IN THAT THE HYDRANT KEY NOW TYPICALLY IS … MOUNTED ON THE BACK OF THE TRUCK … THE WHOLE INDUSTRY IS STARTING TO CHANGE IN THAT WE’RE BECOMING MUCH MORE SAFETY-ORIENTED WHEN IT COMES TO THESE TYPES OF THINGS … THIS BECAME REDUNDANT, AND YOU KNOW, IT WAS A LITTLE BIT SMALL FOR THE JOB THAT IT WAS ASKED TO DO AS WELL. OBVIOUSLY, THE BIGGER YOUR TOOL, THE BETTER PRYING AND STRENGTH AND WEIGHT YOU GET. THIS, YOU RELIED A LOT ON THE PERSONAL STRENGTH OF THE PERSON TO BE ABLE TO USE THIS EFFECTIVELY … WHEREAS WITH THE BIGGER ONES NOW, THEY’RE HEAVIER, THEY’RE A LITTLE BIT LONGER, YOU CAN JUST GET BETTER LEVERAGE NATURALLY.” PETIT AGREED, ADDING THAT HE BELIEVED THE WRENCH “WAS MADE IN LETHBRIDGE. MAYBE LETHBRIDGE IRON WORKS.” DZUREN EXPLAINED THAT THE WRENCH “WAS CARRIED IN A LEATHER HOLSTER TYPE OF THING THAT HUNG AT YOUR SIDE AND IT WAS ONE OF THE THINGS YOU PUT ON RIGHT AWAY, AS SOON AS YOU PUT ON YOUR TURN OUT GEAR … THAT WOULD BE THERE BECAUSE YOU WOULD NEED THAT TO TURN ON YOUR FIRE HYDRANT IF YOU NEEDED THE HYDRANT FOR WATER … AND IT ALSO HAD, THERE WAS A LITTLE, TINY, THE TOP OF THE KEY THERE WAS A LITTLE ROUND THING THAT WAS THERE TO TIGHTEN THE CUP LINKS ON HOSES, IF YOU HAD TO TIGHTEN A HOSE THAT WAS LEAKING.” SEE PERMANENT FILE FOR FULL INTERVIEW TRANSCRIPTS AND ADDITIONAL INFORMATION ABOUT THE LETHBRIDGE FIRE DEPARTMENT.
Catalogue Number
P20150010011
Acquisition Date
2015-02
Collection
Museum
Images
Less detail
Other Name
WATER CURTAIN NOZZLE
Date Range From
1960
Date Range To
2005
Material Type
Artifact
Materials
METAL, RUBBER
Catalogue Number
P20150010015
  2 images  
Material Type
Artifact
Other Name
WATER CURTAIN NOZZLE
Date Range From
1960
Date Range To
2005
Materials
METAL, RUBBER
No. Pieces
1
Height
19.0
Length
24.8
Width
16.6
Diameter
9.0
Description
ADJUSTABLE SILVER COLOURED METAL WATER CURTAIN NOZZLE. CENTRAL CYLINDRICAL PORTION HAS A COUPLING ON ONE END, THROUGH WHICH BLACK RUBBER IS VISIBLE. THE OPPOSITE END HAS A CAP ON THE END OF THE CYLINDER. THIS CAP HAS A SMALL KNOB, WHICH HAS A VERY SHORT PIECE OF THIN CHAIN ATTACHED. COMING OUT FROM THE TOP OF THE CLYINDER IS THE DUAL-ADJUSTABLE NOZZLE: A 90 DEGREE FITTING ALLOWS THE NOZZLE TO ROTATE HORIZONTALLY AND HAS A BOLT THAT CAN BE TIGHTENED TO PREVENT FURTHER ROTATION; THE SECOND COMPONENT ROTATES VERTICALLY AND IS ROUGHLY SHAPED LIKE A THUMBLESS MITTEN AND AN 11CM LONG SLIT THAT ALLOWS THE WATER TO SPRAY OUT. BELOW THE NOZZLE, COMING OUT FROM THE SIDES OF THE CYLINDER, IS A ROUGHLY TRIANGULAR SHAPED PORTION, WHICH GOES UNDER THE CYLINDER AND HAS TWO SMALL BOLTS ON THE VERY BOTTOM. EACH OF THE ARMS OF THIS TRIANGULAR SHAPE HAVE A RED STRIPE, WITH ONE HAVING A STICKER OF "Q1" IN THE RED STRIPE. OVERALL IN FAIR TO GOOD CONDITION. THE SILVER FINISH ON THE METAL HAS FLAKED OFF, ESPECIALLY ON THE EDGES/CORNERS, AROUND THE COVER WITH THE SMALL PIECE OF CHAIN AND AROUND THE COUPLING. THE RED STRIPES HAVE PARTIALLY SCRATCHED OFF. THE "Q1" STICKER IS LOOSE.
Subjects
REGULATIVE & PROTECTIVE T&E
Historical Association
SAFETY SERVICES
History
THIS WATER CURTAIN NOZZLE WAS USED BY THE LETHBRIDGE FIRE DEPARTMENT. IN THE SUMMER OF 2015, COLLECTIONS TECHNICIAN KEVIN MACLEAN, CONDUCTED A SERIES OF INTERVIEWS WITH CURRENT AND FORMER MEMBERS OF THE FIRE DEPARTMENT, INCLUDING: CLIFF “CHARLIE” BROWN (HIRED IN 1966, RETIRED 2004), TREVOR LAZENBY (HIRED IN 1994), LAWRENCE DZUREN (HIRED IN 1959, RETIRED 1992), AND RAYMOND “RAY” PETIT (HIRED 1965, RETIRED 1998). BROWN RECALLED “THAT’S JUST A KIND OF SPRAY CURTAIN BETWEEN BUILDINGS. I DON’T EVER REMEMBER USING IT. THAT’S WHAT IT IS. IF ONE BUILDING IS ON FIRE, AND YOU WANT TO TRY AND SAVE THE OTHER BUILDING, YOU PUT IT ON THERE, JUST KIND OF A BIG WALL OF SPRAY, AND THAT WOULD KEEP THE OTHER BUILDING SAFE.” LAZENBY ADDED: “THIS IS CALLED A CURTAIN NOZZLE AND THE IDEA BEHIND THIS NOZZLE WAS … FOR EXPOSURE PROTECTION. AND, WHAT I MEAN BY THAT IS, IF YOU HAVE A HOUSE IN THE MIDDLE OF THE STREET THAT’S ON FIRE AND THE FIRE IS VENTING OUT THE WINDOWS ON ONE SIDE, THE HOUSE THAT IS IMMEDIATELY EXPOSED TO THAT HOUSE THAT’S ON FIRE, WE CONSIDER THAT AN EXPOSURE HAZARD … THE BEST WAY TO STOP HEAT FROM TRANSFERRING RADIANTLY FROM HOUSE A TO HOUSE B WAS TO PUT UP A STREAM OF WATER IN BETWEEN THE HOUSES … IT DIDN’T WORK VERY WELL WHEN IT WAS WINDY AND UNFORTUNATELY WITH THE WINDS THAT WE GET AROUND HERE IT BECAME INEFFECTIVE AT TIMES, AND IT ALSO WASN’T VERY STABLE. IF YOU PUMPED THIS THING TO MORE THAN ABOUT 60 POUNDS PER SQUARE INCH AT THIS NOZZLE, IT BECAME UNSTABLE AND IT WOULD FLIP OVER … THE IDEA AND THE CONCEPT WAS EXCELLENT … BUT I THINK [IN THE END] IT DIDN’T WORK AS WELL AS WHAT WAS HOPED.” LAZENBY CONTINUED, STATING THAT THE NOZZLES WERE “DEFINITELY ON THE TRUCKS WHEN I STARTED … [AND THAT] SOMEWHERE AROUND 2005” THEY WERE REMOVED FROM THE TRUCKS AND REPLACED WITH A “BLITZ FIRE NOZZLE”. HE RECALLED THAT THE WATER CURTAIN NOZZLE WAS USEFUL: “I SAW IT DEPLOYED. WE DID USE IT. AND AS FAR AS EFFICACY, IT’S HARD TO KNOW REALLY WHAT WOULD HAVE HAPPENED IF IT HADN’T BEEN THERE, SO, DID IT DO ITS JOB? YES, IT DID. THEY WERE JUST A LITTLE BIT TOO FINICKY AND JUST MAYBE DIDN’T WORK QUITE AS WELL AS THE NEWER TECHNOLOGY THAT WAS COMING ON THE MARKET.” PETIT ADDED THAT THE WATER CURTAIN NOZZLE WAS “JUST LIKE A SPRINKLER SYSTEM … YOU COULD PUT THAT BETWEEN THE TWO [CLOSE TOGETHER] BUILDINGS SO YOU COULD PROTECT THE OTHER ONE … I’VE SEEN IT USED, NOT IN A FIRE, BUT IN DRILLS … IT PROBABLY CAME IN AFTER [I STARTED IN THE 1960S] BUT LIKE I SAY, THE ONLY TIME I’VE EVER USED IT WAS WHEN WE HAD SOME DRILLS.” DZUREN RECALLED AN EARLIER VERSION: "I DON’T RECALL EVER USING THAT. NOW, THERE’S ANOTHER ONE THAT’S … GOT THESE LEGS SITTING HERE LIKE THAT [AND] YOU WOULD SET THAT ON THE GROUND. NOW IF THAT WAS TO HOOK UP A HOSE, THIS COULD BE SOMETHING WHERE YOU COULD HAVE A CONSTANT SPRAY GOING OUT. SAY IF THERE’S A FIRE THERE, AND YOU WANT TO PROTECT AN EXPOSURE CLOSE BY, AND THE FACT THAT THIS TRIPOD THERE, TO HAVE IT SITTING STEADY ON THE GROUND, AND THE SPRAY WOULD COME OUT OF THERE, THAT’S ALL THAT COMES TO MIND. WE HAD A FIRE DOWN TOWN HERE, IT WAS THE OLD SAAN STORES ON THIS STREET, AND THERE WAS A FIRE IN THE UPPER STORY, AND WE, THERE WERE POWER LINES AND TRANSFORMERS RIGHT IN THE ALLEY, AND WE SET UP WHAT WE CALL A CURTAIN NOZZLE, AND IT WAS BASICALLY, BUT IT DIDN’T LOOK LIKE THAT, IT WAS BASICALLY THAT, BUT IT WAS A FLAT PIECE OF BRASS ABOUT THAT LONG WITH HOLES IN IT, AND WE PUT THAT ON SO IT WOULD BE A SPRAY GOING UP FAIRLY HIGH, I THINK IT WENT PROBABLY TWENTY-FIVE, THIRTY FEET HIGH. ONCE YOU PUT THE TWO AND A HALF INCH NOZZLE ON THERE WITH THE HIGH PRESSURE TO PROTECT THE TRANSFORMERS FROM HEAT, FROM THE BUILDING THAT WAS BURNING. NOW, THAT’S THE ONLY THING I CAN THINK OF, OF WHAT THAT MIGHT BE, BUT I DON’T, I DON’T REMEMBER THAT…” SEE PERMANENT FILE FOR FULL INTERVIEW TRANSCRIPTS AND ADDITIONAL INFORMATION ABOUT THE LETHBRIDGE FIRE DEPARTMENT.
Catalogue Number
P20150010015
Acquisition Date
2015-02
Collection
Museum
Images
Less detail
Date Range From
1950
Date Range To
2000
Material Type
Artifact
Materials
METAL, PLASTIC, RUBBER
Catalogue Number
P20150010010
  2 images  
Material Type
Artifact
Date Range From
1950
Date Range To
2000
Materials
METAL, PLASTIC, RUBBER
No. Pieces
1
Height
16.0
Length
50.3
Width
27.6
Description
FIRE-HOSE NOZZLE. SILVER COLOURED METAL, BLACK RUBBER AND PLASTIC. TWO LARGE BLACK RUBBER HANDLES COME OUT FROM THE CYLINDRICAL PORTION OF THE NOZZLE, MAKING A ROUNDED-CORNER SQUARE, WITH THE BODY OF THE NOZZLE GOING DOWN THE MIDDLE. "L" SHAPED METAL HANDLE WHERE BLACK RUBBER HANDLE MEETS BODY OF NOZZLE. DARK GREY COUPLING IN THE MIDDLE OF THE NOZZLE ALLOWS THE LOWER HANDLE PORTION TO BE REMOVED. STAMPED INTO THE DARK GREY METAL: "AKRON NPSH". SILVER METAL ADJUSTABLE HANDLE ALLOWS THE NOZZLE TO BE OPENED OR CLOSED AND IS EMBOSSED WITH "CLOSED" AND "OPEN" ON OPPOSITE SIDES OF THE HANDLE. STAMPED INTO THE METAL NEAR THIS OPEN/CLOSE LEVER IS "AKRON" AND THERE IS ALSO A BLACK STICKER OF "A1". ON THE UNDERSIDE OF THIS LEVER IS A SQUARE PATCH OF MEDIUM BLUE PAINT AND SCRATCHED INTO THE METAL IS "16 B". ABOVE THIS IS AN ADJUSTABLE RING, STAMPED WITH THE FOLLOWING MEASUREMENTS: "120 3/4; 150 7/8; 200 1; 250 1 1/8" (THESE MEASUREMENTS INDICATE HOW MANY GALLONS OF WATER PER MINUTE THE NOZZLE WILL EXPEL). IT IS ALSO STAMPED WITH: "FLUSH" AND "AKRON TURBOJET". THIS RING HAS 24 RAISED SQUARES FOR GRIPPING. BEYOND THIS IS ANOTHER ADJUSTABLE RING, STAMPED WITH "I V V", WHERE THE FIRST 'V' IS EXAGERATED AND EXTRA WIDE. (ADJUSTING THIS RING ADJUST THE FLOW OF WATER FROM A STRAIGHT STREAM TO A MIST OR FOG). THE BACKGROUND OF THESE STAMPS IS RED. BLACK RUBBER ABUTS THE ADJUSTABLE RING. THE RUBBER SECTION IS 7.7CM LONG AND IS TEXTURED, FIRST WITH A WIDE SET OF LINES, THEN ON THE VERY EDGE OF THE NOZZLE WITH A VERY CLOSE SET SECTION OF LINES. EMBOSSED ON THIS RUBBER SECTION IS: "US PAT. 3,387,791 - CAN PATENTED 1969". THE VERY END OF THE NOZZLE, WHERE THE WATER COMES OUT, HAS 24 BLACK PLASTIC TEETH. OVERALL IN VERY GOOD CONDITION. SIGNS OF WEAR ON THE SILVER FINISH, ESPECIALLY ON ADJUSTABLE OPEN/CLOSED HANDLE AND THE "L" SHAPED HANDLE.
Subjects
REGULATIVE & PROTECTIVE T&E
Historical Association
SAFETY SERVICES
History
THIS FIRE-HOSE NOZZLE WAS USED BY THE LETHBRIDGE FIRE DEPARTMENT. IN THE SUMMER OF 2015, COLLECTIONS TECHNICIAN KEVIN MACLEAN, CONDUCTED A SERIES OF INTERVIEWS WITH CURRENT AND FORMER MEMBERS OF THE FIRE DEPARTMENT, INCLUDING: CLIFF “CHARLIE” BROWN (HIRED IN 1966, RETIRED 2004), TREVOR LAZENBY (HIRED IN 1994), AND LAWRENCE DZUREN (HIRED 1959, RETIRED 1992). BROWN EXPLAINED THAT THIS NOZZLE WAS “PROBABLY ONE OF THE MOST DANGEROUS WEAPONS WE’VE GOT ON THAT DEPARTMENT. YOU HAD TO HAVE TWO GUYS HOLDING THAT THING … IT WAS FOR LARGER FIRES. YOU DIDN’T TAKE THAT INTO FIRES, BECAUSE YOU COULDN’T CONTROL IT. YOU’D TAKE IT MAYBE TO A DOOR OR SOMETHING LIKE THAT. THIS HERE NOZZLE – YOU’D TURN – IT WOULD BE A SPRAY OR A STRAIGHT STREAM. IF YOU PUT IT ON NON-STRAIGHT STREAM, IT WOULD DRAG YOU ALL OVER THE GROUND. I CAN REMEMBER SEEING GUYS ON THIS NOZZLE, SNAKING BACK AND FORTH LIKE THAT, AND THEM HANGING ONTO THE NOZZLE BEFORE THEY COULD GET THEIR BALANCE TO SHUT IT OFF … YOU HAD TO HAVE TWO GUYS ON IT, AND IF BY CHANCE, THEY FELL OFF IT, AND THEY LET IT LOOSE, WELL, YOU CAN IMAGINE. THAT THING PROBABLY WEIGHED … I’M GUESSING 40 POUNDS; IT WAS A VERY HEAVY NOZZLE. IF IT HIT ANYBODY … IT WOULD BE PRETTY HARD. SO, IF YOU DIDN’T HAVE TWO GUYS ON THAT NOZZLE, YOU’D TAKE IT AND YOU’D MAKE A CIRCLE ON IT, AND YOU’D SIT ON THE CIRCLE WITH THE NOZZLE LIKE THAT, AND JUST THAT LITTLE CIRCLE WOULD SORT OF KNOCK THE PRESSURE, SO IT DIDN’T ALL COME OUT OF THE NOZZLE. IT WOULD BE BACK IN THAT LITTLE CIRCLE SO ONE GUY COULD HOLD IT. BUT YOU’D PRETTY WELL HAVE TO SIT ON THAT NOZZLE. AND, AFTER YOU WERE ON THAT NOZZLE FOR ABOUT 15 MINUTES, YOU WERE JUST WIPED. IT WAS LIKE FIGHTING A TOUGH LITTLE CALF. BUT THAT WAS JUST MORE OR LESS FOR THE BIG FIRES, AND FOR THE FIRES YOU COULDN’T GET INTO.” LAZENBY EXPANDED SAYING: “IT’S A TWO AND A HALF INCH NOZZLE AND THIS WAS NEARING THE END OF ITS LIFE SPAN WHEN I WAS HIRED. THIS IS A FOG NOZZLE, WHICH MEANS THAT YOU CAN CHANGE THE PATTERN OF THE WATER FROM A RELATIVELY SMOOTH OR STRAIGHT STREAM INTO A 75 DEGREE FOG FOR YOUR PROTECTION. BEING A TWO AND HALF INCH NOZZLE, THIS CAN FLOW AN AWFUL LOT OF WATER … I BELIEVE THE ERGONOMIC PLASTIC HANDLES WERE JUST FOR ERGONOMICS AND EASE OF HOLDING ON TO THAT. THIS HOSE WAS BIG ENOUGH THAT TYPICALLY ONE PERSON WOULDN’T WANT TO OPERATE THAT BY THEMSELVES, UNLESS YOU’RE A REALLY BIG, STRONG GUY. EVEN EMPLOYING WHAT WAS CALLED THE KEENAN HOSE LOOP AND ACTUALLY ROTATE THE NOZZLE UNDERNEATH, AROUND AND UNDERNEATH ITSELF, UNDER THE HOSE AND YOU WOULD SIT ON THE CROSS OF THE HOSE SO THAT WOULD BEAR ALL THE NOZZLE REACTION AND ALL YOU WOULD HAVE TO DO IS DIRECT THE STREAM … GOOD NOZZLE, BUT QUITE HEAVY AND WE WERE GOING AWAY FROM THESE IN FAVOUR OF A NEWER, PISTOL-GRIP STYLE OF NOZZLE WHERE IT WAS ACTUALLY LIKE A PISTOL HANDLE WITH THE BALE FIXED ON TOP THAT IT JUST GAVE YOU A LITTLE BIT EASIER USE, LESS CUMBERSOME … I NEVER ACTUALLY USED ONE OF THESE EXCEPT FOR IN TRAINING, BUT THEY WERE ON OUR BACKUP ENGINES – THEY WEREN’T FRONT LINE, BUT THEY WERE ON THE BACKUP ENGINES WHEN I STARTED.” DZUREN ADDED: “THERE’S USUALLY EITHER TWO OR THREE GUYS, DEPENDING ON WHERE YOU WERE USING IT. BECAUSE THE PRESSURE ON THAT, YOU HAD TO HAVE FAIRLY HIGH PRESSURE TO HAVE THAT EVEN FUNCTION PROPERLY. SO YOU WOULD NEED TO HAVE ONE GUY THAT WOULD OPERATE THIS TRIGGER VALVE HERE, OR THE SPRAY VALVE, AND SOMEBODY WOULD BE BEHIND YOU MAKING SURE THAT IT DIDN’T GET AWAY ON YOU, BECAUSE IF A HOSE GOT AWAY ON YOU WITH IT RUNNING, IT WOULD … IT COULD BREAK A PERSON’S LEG OR KILL A PERSON … IF IT GOT AWAY FROM THEM.” SEE PERMANENT FILE FOR FULL INTERVIEW TRANSCRIPTS AND ADDITIONAL INFORMATION ABOUT THE LETHBRIDGE FIRE DEPARTMENT.
Catalogue Number
P20150010010
Acquisition Date
2015-02
Collection
Museum
Images
Less detail
Other Name
HOUSE ALARM SYSTEM
Date Range From
1908
Date Range To
1973
Material Type
Artifact
Materials
STEEL, GLASS, BRASS
Catalogue Number
P19760096000
Material Type
Artifact
Other Name
HOUSE ALARM SYSTEM
Date Range From
1908
Date Range To
1973
Materials
STEEL, GLASS, BRASS
No. Pieces
32
Height
31.1
Length
8.3
Width
18.4
Description
.1 HOUSE ALARM BOX. ABOVE DIMENSIONS. STEEL, GLASS, BRASS. PAINTED RED. BOX IN PENTAGONAL SHAPED WITH ROUND CASEMENT IN FRONT FACE. A COG-WHEEL BRASS MECHANISM IS IN THE CASEMENT. CASEMENT FACE IS GLASS EDGED WITH COILED GOLD WIRE MOTIF. A KNOBBED BRASS LEVER IS ON MIDDLE RIGHT SIDE OF BOX. BOX FEATURES A VARIETY OF CIRCUIT WIRE CONNECTORS. BACK SIDE FEATURES 3 HOLES. BOX IS EMBOSSED AT TOP CENTRE WITH A CLENCHED FIST SYMBOL AND "GAMEWELL CO." .2 HOUSE ALARM GONG AND KEY WINDER. 84.4 CM HT. X 12.1 CM TH. X 33.0 CM WTH. X 35.6 CM DIA. BRASS, OAK WOOD. 2 PIECES. NATURAL COLOURS. CIRCULAR BRASS GONG IS MOUNTED ON OAK FRAME AND CASE. TOP OF CASE IS CONVEX WITH 6 CARVED BALLS ALONG TOP EDGE. A BRASS COG-WHEEL MECHANISM IS INSIDE CASE (ABOVE GONG) BEHIND CRACKED GLASS DOOR. KEY WINDER FITS IN KEYHOLE AT BOTTOM LEFT OF GLASS DOOR. BRASS KEY WINDER IS FLANGED. 4 WIRES AND A RING FOR HANGING PROTRUDE FROM TOP OF GONG CASE. A LABEL SCREWED ONTO DOOR STATES: "THE NORTHERN ELECTRIC MANUFACTURING COMPANY LIMITED. .3 PUNCH REGISTER. 17.3 CM HT. X 12.7 CM WTH. X 22.9 CM LTH. BRASS, WOOD, GLASS. 7 PIECES. BASE PAINTED BLACK. REGISTER IS A KEY-WOUND BRASS COG-WHEEL MECHANISM CONTAINED IN A BRASS AND GLASS CASE. KEY WINDER IS MISSING. REGISTER IS MOUNTED ON A HOLLOW PAINTED WOOD BASE. MECHANISM OPERATES A ROLL OF PAPER TAPE MOUNTED IN A BRASS SPOKED REEL AND FEED THROUGH A PUNCH AND ALONG A GUIDE PLATE. A SMALL (3.6 CM HT. X 3.8 CM DIA.) BRASS CUT SITS BELOW PUNCH HEAD TO CATCH PIECES OF PUNCHED OUT PAPER, AS TAPE IS FED THROUGH AND PUNCHED TO RECORD FIRE CALLS. TAPE REEL DIA 12.7 CM LABEL ENGRAVED ON CASE ABOVE PUNCH HEAD READS: "HARRINGTON-SEABERG MOLINE, ILLINOIS". THE PUNCH REGISTER IS WIRED TO AN ELECTRONIC SYSTEM AND OUTSIDE FIRE ALARM BOXES AT VARIOUS STREET LOCATIONS. .4 TAPE TAKE-UPS. 22.0 CM HT. X 7.2 CM WTH. X 15.0 CM LTH. BRASS, STEEL. 2 UNITS (6 PIECES). BLACK FINISH ON STEEL. SERIAL NO'S. 105662, 105793. 2 IDENTICAL UNITS, EACH CONSISTING OF A KEY-WOUND MECHANISM IN A BLACK STEEL CASE. A TAKE-UP TRIP LEVER IS MOUNTED ON THE KEY WIND POST OF EACH UNIT. A BRASS SPOKED REEL IS GEARED TO THE MECHANISM AND TRIP LEVER ON EACH UNIT, TO TAKE UP THE USED, PUNCHED TAPE COMING FROM THE PUNCH REGISTER. SPOKED REEL DIA. 12.7 CM. ENGRAVED LABELS ON CASES FEATURE CLENCHED FIST AND READ: "GAMEWELL THE GAMEWELL CO., NEWTON, MASS." AND SERIAL NUMBERS. THESE ARE COMPANION UNITS TO THE PUNCH REGISTER. .5 KEY WINDER. 0.5 CM TH. X 1.8 CM WTH. X 8.6 CM LTH. BRASS, STEEL. NATURAL COLOUR. RATCHET-STYLE SQUARE KEY FOR WINDING SPRINGS ON TAPE TAKE-UP UNITS. KEY RATCHET TENSION HAS BEEN REINFORCED WITH STEEL LEAF SPRING MOUNTED WITH BRASS WIRE AND SOLDER. .6 PACKAGE OF PAPER TAPES. 15.5 CM HT. X 11.5 CM DIA.PAPER, WOOD. 6 PIECES. 6 PAPER TAPE ROLLS TO REFILL PUNCH REGISTER ARE WOUND ON WOOD CORES AND WRAPPED IN BROWN PAPER. PACKAGE HAS BEEN OPENED. EACH ROLL IS 2.5 CM WIDE. .7 RELAY. 7.0 CM HT. X 9.4 CM WTH. X 17.7 CM LTH. SOAPSTONE, CORDAGE, BRASS, STEEL, BAKELITE, WAX. NATURAL COLOURS. RELAY IS MOUNTED ON A RECTANGULAR SOAPSTONE BASE. MOUNT HOLES ON UNDERSIDE OF BASE ARE PLUGGED WITH WAX. RELAY FEATURES BAKELITE INSULATED COILS, BRASS WIRE CONNECTORS AND FITTINGS, AND A SPARK GAP ADJUSTABLE FOR WIDTH AND TENSION (BY COIL SPRING & CORD). .8 TEST SWITCH. 4.9 CM TH. X 9.6 CM WTH. X 13.5 CM LTH. BRASS, STEEL, MASONITE, BAKELITE. BLACK FINISH ON STEEL AND MASONITE. TELEGRAPH KEY-STYLE CIRCUIT TEST SWITCH, WIRED IN-LINE AND USED TO TEST HOUSE LARM BOX CIRCUIT. KEY IS BRASS WITH BAKELITE KNOB, MOUNTED ON STEEL BASE, MASONITE BASE PLATE, BRASS MOUNTING BOLTS. .9 VOLTAGE REGULATOR SWITCH. 12.0 CM HT. X 20.5 CM DIA. BRASS, CAST IRON, STEEL, CERAMIC. 3 PIECES. BLACK PAINTED BASE. "SERIAL #172836" UNDERSIDE OF BASE. SWITCH CONSISTS OF BRASS WHEEL-STYLE HANDLE ATTACHED WITH SET SCREW, BRASS FACE PLATE, AND CERAMIC/BRASS/STEEL/IRON BASE. BASE FEATURES 3 SCREW LUGS, 2 WIRE CONNECTORS AT SIDE, TURNING STEEL CENTRE SHAFT, CERAMIC INSULATED BRASS CONTACTS ON UNDERSIDE, SERIAL NO. PLATE ON UNDERSIDE, AND ROTATING CONTACT BETWEEN BRASS CONTACTS & CENTRE SHAFT. BOTH FACE PLATE AND BASE ARE EMBOSSED WITH DIRECTIONAL ARROWS AND: "TO LOWER (AND) RAISE VOLTAGE, WARD LEONARD ELECTRIC CO., BRONXVILLE, N.Y., U.S.A.", AND: "TO RAISE RESISTANCE". .10 D.C. VOLTMETER. 10 CM HT. X 20.2 CM DIA. BRASS, GLASS. BLACK PAINTED CASE/FACE. METER FEATURES BRASS/GLASS FACE, BLACK PAINT TIM ON FACE, AND INCREMENTS FROM 0-150 INSIDE GLASS FACE. METER IS NUMBERED "15522" (INSIDE GLASS FACE). EMBOSSED ON FACE: "WAGNER ELECTRIC MFG. CO., TYPE-D., ST. LOUIS, U.S.A." THIS IS A COMPANION UNIT TO THE VOLTAGE REGULATOR. .11 D.C. AMMETERMETER IS SIMILAR IS ALMOST ALL RESPECTS TO D.C. VOLTMETER DESCRIBED PREVIOUSLY AND IS ALSO A COMPANION UNIT TO THE VOLTAGE REGULATOR. INCREMENTS ARE 0-500 MILLI-AMPS, AND METER IS NUMBERED "15571" INSIDE GLASS FACE. .12 RECTIFIER. 13.5 CM HT. X 12.7 CM WTH. X 27.9 CM LTH. BRASS, STEEL, BAKELITE, WIRE. BLACK COLOUR. "STYLE NO. 947766-A" ON PLATE. ITEM CONSISTS OF TWIN COILS, ANOTHER COIL AND A CIRCUIT PANEL ALL MOUNTED ON STEEL CHANNEL. BASE AND INTERCONNECTED WITH INSULATED WIRES. WIRE CONNECTORS AND OTHER ELECTRICAL FURNISHINGS ARE BRASS. A STEEL SPECIFICATION PLATE IS MOUNTED ON TOP OF THE TWIN COILS AND FEATURES A CLENCHED FIST SYMBOL, AND READS: "RECTOX RECTIFIER". OTHER INFORMATION INCLUDES: "A.C. VOLTS 105-115-125, D.C. VOLTS 30-45-60, .60 CYC., STYLE NO., .115 AMPS, LICENSED UNDER PATENT 1.640.335, ETC., WESTINGHOUSE ELECTRIC & MFG. CO.", ETC. .13. 15 CM TH. X 31 CM WTH. X 56 CM LTH. BRASS, STEEL, BAKELITE, RUBBER, WOOD, GLASS, WIRE WITH BRAID COVER. BLACK.UNIT CONSISTS OF SMALL VOLTAGE REGULATOR WITH WHEEL CONTROL AND 0-500 MILLI-AMP D.C. AMMETER MARKED: "TRIPLETT, MODEL 521" MOUNTED ON BOARD WITH EMBOSSED BRASS PLATE "GONGS". 4 MOUNTING BOLTS, 1 AT EACH CORNER. GONG AND ELECTRICAL CIRCUIT ON REVERSE SIDE.
Subjects
REGULATIVE & PROTECTIVE T&E
Historical Association
SAFETY SERVICES
History
SYSTEM WAS LOCATED IN OPERATOR'S OFFICE IN FIRE HALL NO. 1, BUILT 1908-09 BY SMITH BROS. & WILSON, ARCHITECT: J.A. MCDONALD. WHEN A PASSERBY PULLED THE STREET ALARM, THE BOX NO. WOULD REGISTER AS PUNCHED HOLES ON PAPER TAPE. FIRE OPERATOR CHECKED NUMBER AGAINST A BOX REGISTER & WROTE OUT NUMBER FOR FIREMEN. OPERATOR THEN PRESSED HOUSE ALARM BOX LEVER TO TRIGGER HOUSE ALARM GONG AND ALERT DUTY SHIFT FIREFIGHTER CREW TO RESPOND TO FIRE. SYSTEM OPERATED ON 100 M.A. AT 48 VOLTS. *** UPDATE JUNE 2012 *** IN JUNE 2012, THE GALT DEVELOPED A SMALL EXHIBIT TO COMMEMORATE AN ANNIVERSARY CELEBRATED BY THE LETHBRIDGE FIRE DEPT. MUCH OF THE EXHIBIT’S CONTENT CENTRED ON THE GALT’S COLLECTION OF FIRE ALARM BOX/SYSTEM OBJECTS. TECHNICAL DATA WAS SOURCED DIRECTLY FROM PERSONS INVOLVED WITH THE PENNSYLVANIA FIRE MUSEUM. NEW INFORMATION ON THE USE OF THE HOUSE FIRE ALARM BOX WAS PROVIDED IN JUNE 2012 BY RETIRED FIRE CHIEF LAWRENCE DZUREN. DZUREN STATED IN 2012 THAT THE BOX’S LEVER WAS PULLED EVERY TIME A FIRE CALL CAME INTO THE HALL BY PHONE. THE LEVER’S FREQUENT/DAILY USE MAY EXPLAIN WHY OPERATORS CHOSE TO REMOVE THE BOX’S HINGED DOOR - DOCUMENTED HISTORICALLY IN GALT ARCHIVAL IMAGE P19760218007. FOR FURTHER INFORMATION ON BOX AND SYSTEM’S RECEIVER/REGISTER, PLEASE SEE PERMANENT FILE.
Catalogue Number
P19760096000
Acquisition Date
1976-03
Collection
Museum
Less detail
Date Range From
1950
Date Range To
1960
Material Type
Artifact
Materials
STEEL, RUBBER, ALUMINUM
Catalogue Number
P19950037020
Material Type
Artifact
Date Range From
1950
Date Range To
1960
Materials
STEEL, RUBBER, ALUMINUM
No. Pieces
2
Description
1. EXTINGUISHER: 48CM (L) X 8.5CM (D) STEEL FIRE EXTINGUISHER PAINTED RED. EXTINGUISHER IS CYLINDRICAL WITH ROUNDED ENDS. AT TOP END IS FLAT PLUG WITH ALUMINUM TRIGGER COVER. COVER HAS ROUNDED TOP WITH VERTICAL OPENING ALONG FRONT. RAISED ON EDGES OVER OPENING IS "PULL" AND "DOWN" WITH TWO ARROWS. THE AREAS ALONG THOSE EDGES ARE PAINTED RED. AT TOP OF COVER IS SQUARE LEVER WITH BALL END. STEEL COILED LOCK KEY HOLDS LEVER IN PLACE. WELDED TO SIDE OF TANK NEAR TOP IS CURVED STEEL HANDLE ON A HINGE. AT BOTTOM END IS ROUNDED VALVE OPENING WHICH HAS BLACK RUBBER HOSE SCREWED INTO IT. RUBBER HOSE HAS STEEL COLLAR AT ATTACHED END AND STEEL NOZZLE AT OTHER END. NOZZLE HAS SPRING LOADED TRIGGER AND THE WORD "ANSUL" IN LOW RELIEF ON BOTH SIDES. STAMPED INTO COLLAR AT BOTH ENDS OF HOSE IS "EASTMAN MANITOWOC. WIS 675". A SMALL ALUMINUM PLATE IS GLUED TO TRIGGER COVER WHICH READS "USE ONLY ON MODEL 4-C". ON LOWER BODY OF TANK IS STEEL PLATE COVER WHICH IS HELD TOGETHER AT BACK WITH BOLTED CLAMP. CLAMP IS USED TO HOLD HOSE IN PLACE. ON PLATE COVER IS "MODEL 4-C TESTED 600 LB." AND "FM" INSIDE A DIAMOND SHAPE. ACROSS TOP IN LARGE BLACK LETTERS IS "ANSUL DRY CHEMICAL FIRE EXTINGUISHER" WITH OPERATIONAL DIRECTIONS IN BLUE BENEATH IT. AT BACK OF PLATE IS DIRECTIONS FOR "AFTER USING" AND "MAINTENANCE" WITH "UNDERWRITERS' LABORATORIES. INC. INSPECTED DRY CHEMICAL HAND FIREEXTINGUISHER CLASSIFICATION B-2 C-2 NO." WITH "A56881" STAMPED INTO METAL. AT VERY BACK OF PLATE IS "ANSUL CHEMICAL COMPANY FIRE EXTINGUISHER DIVISION MARINETTE, WISCONSIN MADE IN U.S.A.". BENEATH THAT IS "U.S. PATENTS 1,793,420 1,839,658 2,484,943 DES. PAT 155,611 OTHER PAT PENDING" WITH "PATENTED, 1950, IN CANADA" UNDER THAT. PAINT ON EXTINGUISHER HAD A NUMBER OF SCRATCHES AND CHIPS IN IT. 2: WALL RACK: RED STEEL BRACKET WITH FASTENING CLASP THAT IS BOLTED TO WALL AND HOLDS EXTINGUISHER. BRACKET IS MADE UP OF TWO PIECES. A VERTICAL STRUT WITH BENT CUP END TO SUPPORT EXTINGUISHER BOTTOM. SECOND PIECE IS 2/3 WAY UP VERTICAL STRUT AND IS FASTENED HORIZONTALLY. IT IS A HALF CIRCLE WITH HINGED ENDS. HINGED TO THOSE ENDS ARE STEEL HOOK AND PRESSURE CLASP. CLASP HAS "ANSUL" STAMPED INTO IT. ALL BUT HINGED CLASP IS PAINTED RED. VERTICAL STRUT HAS THREE HOLES FOR BOLTS TO FASTEN IT TO WALL.
Subjects
REGULATIVE & PROTECTIVE T&E
Historical Association
SAFETY SERVICES
History
SEE P19950037001-GA. BELONGED TO WILLIAM H. SHORT, WHO WAS THE LAST FIRE CHIEF OF THE OLD NO. 1 FIRE HALL IN LETHBRIDGE. *UPDATE* IN 2016 COLLECTIONS ASSISTANT RUTHANN LABLANCE CONDUCTED A SURVEY OF CLOTHING, INCLUDING A BELT DONATED BY SHARON DEREK. THE FOLLOWING BIOGRAPHICAL INFORMATION WAS COMPILED USING ARTICLES FROM THE LETHBRIDGE HERALD. THE DONOR, SHARON DERRICK, IS THE NIECE OF AGNES SHORT. AGNES CHRISTINA SHORT WAS BORN ON APRIL 20, 1916 TO WILLIAM H. AND BERTHA SHORT (MAIDEN NAME UNKNOWN). SHE GRADUATED FROM LETHBRIDGE COLLEGIATE INSTITUTE AND THEN ATTDNED THE CALGARY GENERAL HOSPITAL FOR NURSING TRAINING, WHICH SHE GRADUATED FROM IN 1939. AGNES WAS THE SUPERVISOR AT THE GALT HOSPITAL FROM 1939-1945. SHE WAS IN CHARGE OF THE NURSING STAFF OF LETHBRIDGE SCHOOL DISTRICT #51 FROM 1947 UNTIL 1958. SHE WAS ALSO THE DIRECTOR OF NURSING AT THE LETHBRIDGE HEALTH UNIT FROM 1964 UNTIL HER RETIREMENT. SHE RETIRED IN 1980 AFTER 42 YEARS OF NURSING. AGNES PASSED AWAY AT THE AGE OF 78 ON OCTOBER 20, 1994. WILLIAM HENRY SHORT WAS AGNES’S FATHER. HE WAS BORN IN LONDON, ENGLAND IN 1889 AND MOVED TO CANADA IN 1909. HE INITIALLY WORKED FOR THE CITY WATERWORKS DEPARTMENT IN LETHBRIDGE FOR TWO YEARS, BEFORE SPENDING 51 YEARS IN SERVICE OF THE LETHBRIDGE FIRE DEPARTMENT. HE OVERSAW THE INTRODUCTION OF MOTORIZED FIRE ENGINES, SWITCHING FROM HORSE POWERED WAGONS, IN 1913. HE ALSO SAW THE DEPARTMENT GROW IN SIZE FROM ONLY 13 TO 49 MEN. HE PASSED AWAY AT THE AGE OF 84 ON NOVEMBER 18, 1974. WILLIAM’S WIFE BERTHA L. SHORT PASSED AWAY ON JULY 28, 1989. ACCORDING TO AN ARTICLE ABOUT AGNES’S LIFE, THE SHORT FAMILY LIVED IN NUMBER 1 FIRE HALL, WHERE WILLIAM WAS FIRE CHIEF. WILLIAM H. AND BERTHA ALSO HAD ANOTHER CHILD, WILLIAM D. SHORT. HE WAS BORN ON AUGUST 16, 1916 AND PASSED AWAY ON AUGUST 5, 1990. HE WAS MARRIED TO MYRTLE (NEE NELSON) SHORT AND THEIR CHILDREN INCLUDE THE DONOR, SHARON DERRICK. SEE PERMANENT FILE FOR COPIES OF THE ARTICLES FROM THE LETHBRIDGE HERALD. *UPDATE* IN 2018 COLLECTIONS ASSISTANT ELISE PUNDYK CONDUCTED A SURVEY OF BOXED TEXTILES AND ACCESSORIES INCLUDING A NUMBER OF ARTIFACTS DONATED BY SHARON DERRICK. ON 1 MARCH 2018, PUNDYK INTERVIEWED DERRICK REGARDING HER DONATION. THE INFORMATION BELOW HAS BEEN EXTRACTED FROM THAT INTERVIEW: A NUMBER OF ARTIFACTS DONATED WERE CONNECTED TO THE DONOR’S GRANDFATHER, WILLIAM H. SHORT AND HIS CAREER AS FIRE CHIEF IN THE NUMBER 1 FIRE HALL IN LETHBRIDGE. “YOU SEE, DURING THE YEARS THAT HE WAS THE FIRE CHIEF,” DERRICK BEGAN, “THEIR QUARTERS ACTUALLY WERE IN THE BACK OF THE FIRE HALL. SO STUFF KIND OF GOT ACCUMULATED THERE. THE WHOLE FAMILY [LIVED IN THE FIRE HALL]. WHEN I WAS LITTLE, I WAS THERE ALL THE TIME. MY FATHER [WILLIAM D. SHORT] WAS A CAPTAIN IN THE FIRE DEPARTMENT, BUT MY GRANDFATHER WAS THE FIRE CHIEF.” WHEN ASKED IF SHE HAD ANY MEMORY OF SEEING HER GRANDFATHER WEARING ANY OF THE ARTIFACTS, SUCH AS THE HELMET (P19950037014) OR THE FIRE PANTS (P19950037008), DERRICK RECALLED, “YES, BECAUSE LETHBRIDGE WAS SMALL AT THE TIME AND WHEN WE LIVED IN THE FIRE HALL AND THE BELLS WENT OFF, WE WOULD OFTEN WALK OVER TO HAVE A LOOK AT THE FIRE. I WOULD SEE MY GRANDFATHER OUT THERE, AND I’D SEE MY FATHER WHEN HE WAS ON SHIFT. THERE WERE SOME HUGE FIRES RIGHT DOWNTOWN. I CAN’T REMEMBER WHAT DATES – PROBABLY BACK IN THE LATE ‘40’S, EARLY ‘50’S. [IN ONE INSTANCE], MY DAD WAS ALSO ON THE BACK OF A FIRE TRUCK, SPEEDING TO A FIRE, AND ANOTHER TRUCK CAME ALONG AND HIT HIM IN THE BACK. HE SUFFERED VERY SEVERE INJURIES FROM THAT. AND I SAW THAT TOO. I WAS JUST ON MY WAY BACK TO SCHOOL.” “WHEN I WAS YOUNG, I WAS ALWAYS IN AND OUT [OF THE FIRE HALL],” DERRICK WENT ON, “THERE WAS A BELL TOWER THERE, WHERE THEY HUNG THE WET HOSES UP TO DRY. THERE WERE RICKETY OLD WOODEN STAIRS GOING ROUND AND ROUND ALL THE WAY UP TO THE TOP OF THE FIRE HALL TO WHERE THE BELL USED TO BE. I USED TO GO UP AND DOWN THOSE STAIRS, AND HOP AND PLAY. AND IN THE BASEMENT THERE WAS PRISON CELLS, BECAUSE IT USED [TO BE] THE POLICE STATION MANY, MANY YEARS BEFORE. IT WAS A COMBINATION OF FIRE AND POLICE. AND, THERE WAS A BIG FURNACE DOWN THERE. I USED TO GO DOWN AND WATCH THE FIREMEN PUSH COAL INTO THE FURNACE TO KEEP IT GOING. IT WAS AN INTERESTING PLACE TO BE AROUND.” “MY GRANDFATHER WAS ON THE INTERNATIONAL BOARD OF FIRE CHIEFS,” DERRICK CONTINUED, “HE WAS VICE-PRESIDENT IN NEW YORK. THEY HAD ASKED HIM TO COME UP AND TAKE THE PRESIDENCY, BUT AFTER MUCH CONSIDERATION, HE DECIDED HE DIDN’T WANT TO LEAVE THE FAMILY FOR THE TWO YEAR TERM IN NEW YORK, SO HE TURNED THAT ONE DOWN. THOUGH HE DID REMAIN ON THE BOARD FOR MANY YEARS.” AN ARTICLE IN THE LETHBRIDGE HERALD PUBLISHED ON SEPTEMBER 27, 2000 READS, “WILLIAM SHORT RETIRED AS LETHBRIDGE FIRE CHIEF IN 1962, ENDING A CAREER AS CHIEF WHICH BEGAN IN JANUARY 1945.” A HERALD ARTICLE FROM 1974 ADDITIONALLY STATES THAT SHORT “JOINED THE LETHBRIDGE FIRE DEPARTMENT IN 1911. HE WAS PROMOTED TO LIEUTENANT IN 1919 AND CAPTAIN IN 1922.” AN ADDITIONAL ARTICLE TITLED, “LETHBRIDGE WELL PROTECTED BY MODERN FIRE DEPARTMENT,” PUBLISHED IN 1967 IN THE LETHBRIDGE HERALD READS, “[IN 1910] THE FIRST FIREHALL THAT [WAS] LOCATED AT 4TH STREET AND 2ND AVENUE SOUTH WAS TORN DOWN. IT WAS A TWO-STOREY BUILDING. A THREE-STOREY FIREHALL WAS BUILT IN ITS PLACE ON THE SAME SITE. THAT EARLY BUILDING HOUSED THE FIRE DEPARTMENT EQUIPMENT, SERVED AS CITY HALL AND THE POLICE STATION…” WHEN ASKED ABOUT THE REASON FOR THE DONATION OF HER FAMILY’S ARTIFACTS DURING THE 2018 INTERVIEW, DERRICK EXPLAINED, “I WAS THE EXECUTOR FOR MY AUNT’S WILL AND WHEN SHE PASSED AWAY SHE [WAS LIVING IN] MY GRANDMOTHER AND GRANDFATHER’S HOME. ALL THIS STUFF HAD BEEN LEFT IN THE HOUSE, SO WHEN WE WERE CLEANING IT OUT FOLLOWING HER DEATH, WE CAME ACROSS ALL THESE THINGS. WHILE I KEPT SOME AS MEMENTOS, MY SISTER AND I [DECIDED TO DONATE OTHER ITEMS TO THE MUSEUM].” PLEASE PERMANENT FILE P19950037001, FOR MORE INFORMATION INCLUDING FULL INTERVIEW TRANSCRIPTION AND COPIES OF ARTICLES REGARDING THE FAMILY HISTORY.
Catalogue Number
P19950037020
Acquisition Date
1995-05
Collection
Museum
Less detail
Other Name
POLES AND CANVAS
Date Range From
1960
Date Range To
1985
Material Type
Artifact
Materials
CANVAS, NYLON
Catalogue Number
P20140019001
  2 images  
Material Type
Artifact
Other Name
POLES AND CANVAS
Date Range From
1960
Date Range To
1985
Materials
CANVAS, NYLON
No. Pieces
1
Length
212
Width
67
Description
RECTANGULAR PIECE OF OFF-WHITE CANVAS, WITH TWO RED NYLON STRAPS SEWN AT EACH VERTICAL EDGE. CANVAS IS FOLDED OVER AND SEWN ALONG BOTH HORIZONTAL EDGES, CREATING TWO LENGTHWISE CHANNELS. ALL SEAMS ARE REINFORCED WITH DOUBLE-STITCHING. FRONT OF CANVAS HAS REPEATING CIRCULAR WATER STAINS ALONG THE CENTRE AND VARIOUS SPOTS OF DISCOLOURATION THROUGHOUT. TEXT AT THE LOWER RIGHT CORNER READS “L F D” IN BLACK MARKER. BACK OF CANVAS HAS SIMILAR WATER STAINING, AND TEXT ACROSS THE CENTRE READING “DISCARD” IN BLACK MARKER. A STAMP AT THE RIGHT SIDE DEPICTS A CIRCULAR CREST AND READS “CITY OF LETHBRIDGE FIRE DEPT” IN BLUE INK. OVERALL GOOD CONDITION.
Subjects
LAND TRANSPORTATION-HUMAN-POWERED
Historical Association
SAFETY SERVICES
HEALTH SERVICES
History
THIS CANVAS STRETCHER, ALONG WITH TWO WOODEN POLES, WAS USED BY THE LETHBRIDGE FIRE DEPARTMENT DURING MEDICAL EMERGENCIES, PRIOR TO THE INCORPORATION OF PARAMEDIC STAFF IN THE DEPARTMENT IN THE MID 1980S. AMONG DEPARTMENT PERSONNEL, IT IS REFERRED TO AS “POLES AND CANVAS”. ON SEPTEMBER 9, 2015 COLLECTIONS TECHNICIAN MACLEAN INTERVIEWED LAWRENCE DZUREN, RETIRED FIRE CHIEF, WHO SERVED WITH THE LETHBRIDGE FIRE DEPARTMENT FROM 1959 TO 1992. OF THE POLES AND CANVAS, DZUREN SAID: “[THIS] WOULD BE IN THE AMBULANCE AND THERE’S TWO BIG WOODEN POLES, NICELY SANDED DOWN. WHEN YOU GOT THE PATIENT YOU WOULD ROLL HIM TO THE SIDE, TUCK THAT UNDER, ROLL HIM BACK ONTO [THE CANVAS], PUT THE POLES IN, AND PICK HIM UP, ONE [FIREMAN] ON EACH END… THAT’S THE WAY WE CARRIED PATIENTS OUT OF WHEREVER WE HAD TO CARRY THEM… I RECALL GOING TO ONE, THERE WAS A BLIZZARD GOING ON, WE GOT THIS BIG FELLA… HE WAS ABOUT 6’5”, AND WE HAD TO GET HIM OUT OF THE BASEMENT … WITH POLES LIKE THIS… YOU THINK YOU CAN MANIPULATE, AND WE USUALLY DID SUCCEED IN GETTING THEM OUT OF THERE, BUT IT WAS WITH A LOT OF BACK BREAKING STUFF TO GET HIM UP THE STAIRS… BECAUSE ONE GUY IS UP THERE TO LIFT THIS WAY, AND THE OTHER GUY IS BENDING DOWN… [POLES AND CANVAS] CAME OUT OF SERVICE WHEN WE STARTED GETTING PARAMEDICS [IN THE MID TO LATE 1980S]. THEY DID AWAY WITH IT, WHICH I WAS KIND OF SURPRISED, BECAUSE WE FOUND IT SUCH AN EASY WAY OF DOING IT. BECAUSE NOW… THE PARAMEDICS AND NURSES PICK THEM UP AND MANUALLY SET THEM ONTO THE BED, WHERE WITH THIS… WE COULD JUST PICK THEM UP, PUT THEM ON [THE BED] AND AWAY WE WENT. BUT THEY FOUND [A METHOD] THAT’S MAYBE MORE EFFICIENT, OR EASIER ON THE PATIENT.” ON SEPTEMBER 15, 2015 MACLEAN INTERVIEWED CLIFF ‘CHARLIE’ BROWN, RETIRED PLATOON CHIEF, WHO SERVED WITH FIRE AND EMERGENCY SERVICES FROM 1966 TO 2004. OF THE POLES AND CANVAS, BROWN SAID: “THAT’S WHAT I WAS TRAINED ON… THAT WAS OUR ‘SCOOP AND RUN’. WHEN WE WENT TO ANY KIND OF EMERGENCY, WE TOOK THE CANVAS WITH US… VERY LITTLE FIRST AID AT THE SCENE, LIKE NEXT TO NONE, UNLESS THERE WAS BLEEDING… IT WAS MOSTLY SCOOP AND RUN… GET THEM TO THE HOSPITAL AS QUICK AS WE COULD… RATHER THAN CARRY [A STRETCHER WITH A METAL FRAME] UP THE STAIRS, WE’D GO UPSTAIRS AND PUT THE PATIENT ON THE POLES… THE [FIREMAN] ON THE BOTTOM, IF [THE PATIENT] WAS STARTING TO SLIDE OFF, THEY’D END UP WITH THEIR LEGS AROUND THE [FIREMAN’S] NECK, AND THERE WAS NOTHING YOU COULD DO… YOU HAD TO GET DOWN, AND IT WASN’T THE PERSON’S FAULT BECAUSE THEY DIDN’T HAVE THE STRENGTH ON THE SLIPPERY CANVAS TO HANG ON.” ON SEPTEMBER 10, 2015 MACLEAN INTERVIEWED TREVOR LAZENBY, LIEUTENANT WITH LETHBRIDGE FIRE AND EMERGENCY SERVICES, WHO TRAINED AS A PARAMEDIC AND STARTED HIS CAREER IN LETHBRIDGE WORKING AS A DISPATCHER IN 1994. OF THE POLES AND CANVAS, LAZENBY SAID: “I NEVER USED THESE, BUT I HAVE HEARD A THOUSAND STORIES ABOUT POLES AND CANVAS – SOME GOOD, WHERE THEY WORKED INCREDIBLY WELL, AND SOME NOT SO GOOD, WHERE IT WAS ALMOST COMICAL THE WAY THINGS UNFOLD. FOR EXAMPLE, YOU GO UP A TWO-STOREY OR THREE-STOREY WALKUP WITH NO ELEVATOR, AND IF YOU’VE GOT [FIREMEN] WHO ARE HEIGHT MISMATCHED… WHEN YOU STARTED GOING DOWN STAIRS, THERE WERE REALLY NO STRAPS ON THESE THINGS TO HOLD PEOPLE – THEY WERE LIKE A MILITARY LITTER. SO AS THE ONE [FIREMAN] IS GOING DOWN THE STAIRS, THE PATIENT STARTS TO SLIDE. THERE WERE STORIES WHERE GUYS WERE TRYING TO HOLD THE POLES UP AS HIGH AS THEY POSSIBLY COULD SO THE [PATIENT] WOULDN’T SLIDE DOWN… PRETTY SOON HIS LEGS ARE HANGING OVER YOUR SHOULDERS!... BUT WHEN I WAS NEW [IN THE MID-1990S], I DON’T KNOW HOW MANY TIMES I GOT TOLD ‘OH THE POLES AND CANVAS ARE WAY BETTER THAN THOSE STRETCHERS YOU GUYS ARE USING TODAY BECAUSE OF THIS AND THIS’ [AND] I AM SURE THAT IN SOME WAYS THEY WERE; I NEVER DISCOUNTED IT.” SEE PERMANENT FILE P20150010001-GA FOR FULL TRANSCRIPTS OF REFERENCED INTERVIEWS ALONG WITH OTHERS WITH FIRE/EMS MEMBERS AND ADDITIONAL RELATED RESEARCH.
Catalogue Number
P20140019001
Acquisition Date
2014-06
Collection
Museum
Images
Less detail

12 records – page 1 of 1.