Skip header and navigation

23 records – page 1 of 2.

Other Name
R.N.W.M.P. BOOTS
Date Range From
1908
Date Range To
1920
Material Type
Artifact
Materials
LEATHER, COTTON
Catalogue Number
P19672564004
  2 images  
Material Type
Artifact
Other Name
R.N.W.M.P. BOOTS
Date Range From
1908
Date Range To
1920
Date
1908
Materials
LEATHER, COTTON
No. Pieces
2
Height
37.8
Length
27.8
Width
10.1
Description
LEATHER LACED INSTEP & UPPER, BROWN, LEATHER SOLE & RIDING HEEL. LACED AT REAR & FRONT. SIDE LACING DECORATIVE. GUSSET AT FRONT ABOVE LACES. CLOTH PULL TABS INSIDE NR. TOP. PULL TABS ON INSIDE ARE STRIPED. INSTEP LACES MISSING. BOTTOM OF HEELS READ "ITS". SEE CONSERVATION REPORT.
Subjects
CLOTHING-FOOTWEAR
Historical Association
SAFETY SERVICES
History
BOOT BASED ON STRATHCONA PATTERN ALTHOUGH NOT CONSISTENT WITH 1901 ISSUE. OTHER PATTERNS WERE TRIED. SEE P19672564001-GA FOR HISTORY & REFERENCES.
Catalogue Number
P19672564004
Acquisition Date
1967-03
Collection
Museum
Images
Less detail
Other Name
PAIR RCMP BOOTS
Date Range From
1940
Date Range To
1950
Material Type
Artifact
Materials
LEATHER, RUBBER, PAPER
Catalogue Number
P19970073008
  2 images  
Material Type
Artifact
Other Name
PAIR RCMP BOOTS
Date Range From
1940
Date Range To
1950
Materials
LEATHER, RUBBER, PAPER
No. Pieces
2
Height
42.2
Length
29.9
Width
10.3
Description
PAIR LIGHT BROWN LEATHER CALF-HIGH RIDING BOOTS. LACES UP FRONT TO MID-CALF, AND AT TOP PORTION OF OUTER SIDES. LACE IS MISSING FROM RIGHT BOOT; VERY BRITTLE AND BROKEN NEAR LOWER EYELETS OF LEFT BOOT. PRESSED PAPER SOLES WITH RUBBER HEELS MARKED "GOOD YEAR". BOOTS ARE CREASED FROM WEAR. PIECE OF LACE IS DETACHED AND STORED SEPARATELY.
Subjects
CLOTHING-FOOTWEAR
Historical Association
SAFETY SERVICES
History
BELONGED TO E.D. WHITE, REG. #21698; FEB. 21, 1941. ROYAL CANADIAN MOUNTED POLICE ISSUE. SEE P19970073001-8-GA FOR RELATED PIECES AND P19970073001-GA FOR MORE INFO. *UPDATE* IN 2017 COLLECTIONS ASSISTANT RUTHANN LABLANCE CONDUCTED A SURVEY OF CLOTHING ITEMS, INCLUDING SEVERAL ITEMS DONATED BY THE LEGION. EMAIL CORRESPONDENCE WITH THE RCMP HISTORY SECTION GAVE THE FOLLOWING INFORMATION: THE SERIAL NUMBER 21698 DOES NOT BELONG TO E.D. WHITE. IT BELONGED TO AN RCMP OFFICER WHO SERVED BETWEEN 1961-1997. NO RCMP MEMBER WITH THE LAST NAME "WHITE" AND INITIALS "E.D." WERE FOUND WITHIN THE RCMP RECORDS. SEE PERMANENT FILE FOR EMAIL CORRESPONDENCE.
Catalogue Number
P19970073008
Acquisition Date
1997-08
Collection
Museum
Images
Less detail
Other Name
R.C.M.P. ANKLE BOOTS
Date Range From
1944
Date Range To
1952
Material Type
Artifact
Materials
LEATHER, CANVAS, RUBBER
Catalogue Number
P20020021003
  2 images  
Material Type
Artifact
Other Name
R.C.M.P. ANKLE BOOTS
Date Range From
1944
Date Range To
1952
Materials
LEATHER, CANVAS, RUBBER
No. Pieces
2
Height
17.5
Length
30.3
Width
10.8
Description
PAIR OF BLACK LEATHER ANKLE BOOTS. BLACK SHOELACES. AT TOP OF EACH BOOT ON INSIDE OF ANKLE THE LETTERS "MP" ARE PERFORATED INTO LEATHER. STAMPED INSIDE EACH BOOT IS "E 80 1450 A I". BOOTS HAVE BROWN LEATHER SOLES. EMBOSSED ON HEEL OF BOOTS IS "WINGFOOT GOOD YEAR".
Subjects
CLOTHING-FOOTWEAR
Historical Association
SAFETY SERVICES
History
ITEMS BELONGED TO DONOR'S FATHER, EDWARD BUCHANAN. EDWARD WAS A MEMBER OF THE ALBERTA PROVINCIAL POLICE FROM 1919 UNTIL 1932, WHEN HE TRANSFERRED TO THE ROYAL CANADIAN MOUNTED POLICE. HE WAS A SENIOR STAFF SARGEANT, ROYAL CANADIAN MOUNTED POLICE AT LETHBRIDGE FROM MAY 1944 TO NOV. 1950. HE RETIRED IN 1950, THEN BECAME DIRECTOR OF CORRECTIONS FOR THE PROVINCE OF ALBERTA. FOLLOWING RETIREMENT, EDWARD BECAME A MEMBER OF THE RCMP VETERAN'S ASSOCATION IN EDMONTON IN 1950/51, AND REMAINED A MEMBER UNTIL HIS PASSING; HE ALSO SERVED AS PRESIDENT OF THIS ASSOCIATION. SEE P20020090001-GA FOR COMPLETE BIOGRAPHY OF EDWARD BUCHANAN. *UPDATE* AN INTERVIEW WAS CONDUCTED BY GALT’S COLLECTION TECHNICIAN KEVIN MACLEAN ON JUNE 8, 2018 WITH THE DONOR JEAN I. BUCHANAN IN REGARDS TO A NEW ARTIFACT OFFER SHE WAS MAKING TO THE MUSEUM. PLEASE SEE PERMANENT FILE P20180014001 FOR MORE INFORMATION REGARDING THE CAREER OF SENIOR STAFF SERGEANT EDWARD ETTERSHANK “BUCK” BUCHANAN, INCLUDING FULL INTERVIEW TRANSCRIPTION AND THE OBITUARY COPY.
Catalogue Number
P20020021003
Acquisition Date
2002-11
Collection
Museum
Images
Less detail
Date Range From
1900
Date Range To
1910
Material Type
Artifact
Materials
BRASS, COPPER, RUBBER
Catalogue Number
P19651634000
Material Type
Artifact
Date Range From
1900
Date Range To
1910
Materials
BRASS, COPPER, RUBBER
No. Pieces
11
Length
75.5
Diameter
9.2
Description
2.8 CM (NOZZLE). "W.D. ALLEN MFG. CO. CHICAGO" ON LIP OF MOUTH. DETACHABLE BRASS NOZZLE. DENTED BADLY. CONSERVATION REPORT ON FILE.
Subjects
REGULATIVE & PROTECTIVE T&E
Historical Association
SAFETY SERVICES
Catalogue Number
P19651634000
Acquisition Date
1965-02
Collection
Museum
Less detail
Date Range From
1900
Date Range To
1910
Material Type
Artifact
Materials
BRASS, RUBBER
Catalogue Number
P19739477000
Material Type
Artifact
Date Range From
1900
Date Range To
1910
Materials
BRASS, RUBBER
No. Pieces
1
Length
25.4
Diameter
2.2
Description
BRASS FIREHOSE NOZZLE, WIDER AT BOTTOM END THAT ATTACHES TO HOSE, TAPERING TO A POINT AT THE OPPOSITE END. CONSERVATION REPORT ON FILE.
Subjects
REGULATIVE & PROTECTIVE T&E
Historical Association
SAFETY SERVICES
Catalogue Number
P19739477000
Acquisition Date
1973-05
Collection
Museum
Less detail
Date Range From
1940
Date Range To
1950
Material Type
Artifact
Materials
BRASS, RUBBER
Catalogue Number
P19780037000
Material Type
Artifact
Date Range From
1940
Date Range To
1950
Materials
BRASS, RUBBER
No. Pieces
1
Height
85.1
Diameter
17.8
Description
SERIAL #734251. BRASS WATER-TYPE FIRE EXTINGUISHER. "GUARDENE FIRE EXTINGUISHER". HAS A YELLOW TAG ATTACHED ON IT. RUBBER HOSE ON ONE SIDE. TURNING "WHEEL" ON TOP. ONE HANDLE. "11.4 LITRE SODA ACID". HAS "2-688" TAPED ON.
Subjects
REGULATIVE & PROTECTIVE T&E
Historical Association
SAFETY SERVICES
History
BELIEVED DATES TO 1940'S. USED IN CIVIC CENTRE, NOW OBSOLETE.
Catalogue Number
P19780037000
Acquisition Date
1978-02
Collection
Museum
Less detail
Date Range From
1945
Date Range To
1955
Material Type
Artifact
Materials
BRASS
Catalogue Number
P19890013001
Material Type
Artifact
Date Range From
1945
Date Range To
1955
Materials
BRASS
No. Pieces
1
Length
36.5
Diameter
7.3
Description
HAND HELD FIRE EXTINGUISHER, LIGUID FILLED WITH "C.T.C." PROBABLY CARBON TETRA CHLORIDE. PUMP ACTION, HANDLE AT ONE END, NIPPLE AT OPPOSITE END. REFILLABLE. GOLD LABEL WITH MANUFACTURERS NAME, INSTRUCTIONS FOR OPERATION & FILLING. A PORTION OF LABEL WITH WARNING IS MISSING. GREEN PAINT CHIPPING. 3 DENTS.
Subjects
REGULATIVE & PROTECTIVE T&E
Historical Association
SAFETY SERVICES
History
FROM THE ESTATE OF ROY & MAY STEWART OF CLARESHOLM. MANUFACTURED BY "THE PYRENE COMPANY LIMITED BRENTFORD ENGLAND."
Catalogue Number
P19890013001
Acquisition Date
1989-05
Collection
Museum
Less detail
Other Name
HYDRANT THAWING KIT
Date Range From
1910
Date Range To
1920
Material Type
Artifact
Materials
CHROMED METAL, LEATHER
Catalogue Number
P19739464000
Material Type
Artifact
Other Name
HYDRANT THAWING KIT
Date Range From
1910
Date Range To
1920
Materials
CHROMED METAL, LEATHER
No. Pieces
2
Height
47.7
Diameter
15.3
Description
CONSISTS OF CYLINDRICAL CASE FILLED WITH OILED COTTON WASTE. LEATHER LOCKING STRAPS ATTACHED, & A TIGHT FITTING CAP OR LID WITH A RING HANDLE. THE LEATHER STRAPS LOCK THE CAP TO THE CASE. 3 BOLT FLANGES PROTRUDE FROM THE BASE. KIT IS CURRENTLY FILLED WITH COTTON WASTE.
Subjects
REGULATIVE & PROTECTIVE T&E
Historical Association
SAFETY SERVICES
History
ORIGINALLY CARRIED ON LETHBRIDGE FIRE DEPARTMENT STEAM PUMP TRUCK NO. 1 (AMERICAN LA FRANCE TYPE 12) KIT IS USED FOR THAWING FROZEN FIRE HYDRANTS. REFER GIFT CERTIFICATE P19739463000-GA.
Catalogue Number
P19739464000
Acquisition Date
1973-11
Collection
Museum
Less detail
Other Name
C/W CASE
Date Range From
1955
Date Range To
1965
Material Type
Artifact
Materials
LEATHER, BRASS, RUBBER
Catalogue Number
P19641365000
Material Type
Artifact
Other Name
C/W CASE
Date Range From
1955
Date Range To
1965
Materials
LEATHER, BRASS, RUBBER
No. Pieces
2
Height
14.0
Length
31.8
Width
23.5
Description
.1 CASE. ABOVE DIMENSIONS. LEATHER, BRASS, STEEL, MASONITE. LEATHER CARRYING HANDLE. MASONITE CASE. STEEL-BOUND EDGES. STAMPMARK ON EACH CLASP "CORBIN MADE IN U.S.A." UNDERNEATH BLACK PAINT ON FRONT. "MCNABB" AND "FULTON". "4" PAINTED WHITE ON TOP. .2 GAS MASK (SET). 15.2 CM HT. X 6.3 CM WTH. X 63.5 CM X 2.5 CM DIA. RUBBER, STEEL, GLASS, TIN. "SCOTT LANCASTER, NEW YORK, U.S.A.: CIRCLE WITH C IN MIDDLE" ON BACK OF MASK. PAPER LABEL ON FRONT OF CANISTER, GIVING DETAILED INSTRUCTIONS OF THE CANISTER "MINE SAFETY APPLIANCE COMPANY PITTSBURGH, PENNA MADE IN U.S.A. U.S.A. PATENTS 1,586,327 - 1,787,875". PAPER LABEL ON BACK. DIRECTIONS ON SHELF LIFE AND STORAGE... "JAN. 17, 56" SCRATCHED ON LID.
Subjects
REGULATIVE & PROTECTIVE T&E
Historical Association
SAFETY SERVICES
History
USED BY LETHBRIDGE FIRE DEPARTMENT IN FIRE FIGHTING OPERATIONS
Catalogue Number
P19641365000
Acquisition Date
1964-12
Collection
Museum
Less detail
Other Name
FIRE HOSE AND WALL MOUNT
Date Range From
1945
Date Range To
1955
Material Type
Artifact
Materials
CANVAS, STEEL, BRASS
Catalogue Number
P20010067000
Material Type
Artifact
Other Name
FIRE HOSE AND WALL MOUNT
Date Range From
1945
Date Range To
1955
Materials
CANVAS, STEEL, BRASS
No. Pieces
1
Height
21
Diameter
64
Description
CANVAS FIRE HOSE WITH BRASS NOZZLE AND COUPLING WRAPPED AROUND CIRCULAR RED MOUNT. CANVAS SHOWS MOLD AND WEAR DAMAGE AT ONE END. CANVAS HOSE INK MARKED "50 FT 2 1/2 IN DUNLOP UNDERWRITERS FIRE HOSE MFD. BY DUNLOP TIRES". RED PAINT ON MOUNT CHIPPING. CORROSION TO BRASS FITTINGS.
Subjects
REGULATIVE & PROTECTIVE T&E
Historical Association
SAFETY SERVICES
History
DONOR STATES CHRIS SWITZER BOUGHT FROM HOYTS IN THE 1950'S BEFORE NO. 8 MINE CLOSED. SOURCE BELIEVES HOSE WAS INTENDED FOR MINE USE, BUT THE ORIGINAL OWNER CHRIS SWITZER NEVER BOUGHT IT FOR MINE USE. DONOR BOUGHT HOSE FROM SWITZER IN GARAGE SALE. CHRIS SWITZER IS MARK SWITZER'S FATHER. *** INFORMATION BELOW PROVIDED BY DONOR AT THE REQUEST OF THE GALT IN 2010. “NO FURTHER INFORMATION.” ***
Catalogue Number
P20010067000
Acquisition Date
2001-12
Collection
Museum
Less detail
Other Name
PERSUADER OR COME-ALONG
Date Range From
1800
Date Range To
1900
Material Type
Artifact
Materials
STEEL, NICKEL PLATING
Catalogue Number
P19662209000
Material Type
Artifact
Other Name
PERSUADER OR COME-ALONG
Date Range From
1800
Date Range To
1900
Materials
STEEL, NICKEL PLATING
No. Pieces
1
Height
29.5
Width
8.3
Description
CHAIN WITH "T" SHAPED SOLID PIECE AT EACH END. SHAPED WITH GROOVE.
Subjects
REGULATIVE & PROTECTIVE T&E
Historical Association
SAFETY SERVICES
History
CHAIN IS WRAPPED AROUND WRIST, "T" PIECES FIT IN EACH OTHER & ARE TWISTED TO "PERSUADE" AN INDIVIDUAL TO FOLLOW A POLICE OFFICER. RETIRED POLICE CHIEF JIM CARPENTER SAYS THIS TYPE OF HANDCUFF WAS USED BY LETHBRIDGE CITY POLICE BEFORE MORE FAMILIAR MODERN HANDCUFF ADOPTED. ***** UPDATE: COPY BELOW WAS RESEARCHED AND WRITTEN FOR SUBMISSION TO LETHBRIDGE LIVING MAGAZINE ON 15 APRIL 2013, RELATED TO THE MUSEUM’S WHAT’S IT FEATURE. REFERENCES TO THE ARTIFACT’S REPRESENTATIONAL USE BY THE LATE, RETIRED CHIEF OF LETHBRIDGE POLICE JIM CARPENTER CAN BE FOUND ON PAGES 83 AND 104 OF HIS BOOK THE BADGE AND THE BLOTTER. RESEARCH WAS CONDUCTED BY MUSEUM VOLUNTEER KIRSTEN CHRISTOPHERSON. “COME-ALONGS” (ALSO KNOWN AS “CHAIN GRIPS” OR “CHAIN NIPPERS”) ARE AN EARLY FORM OF POLICE RESTRAINT USED FROM THE LATE 19TH TO MID 20TH CENTURY. THE LATE POLICE CHIEF JIM CARPENTER WROTE IN HIS BOOK THE BADGE AND THE BLOTTER THAT, WHEN HE BEGAN HIS CAREER WITH LETHBRIDGE CITY POLICE IN 1940, HE WAS ISSUED “COME-ALONG CHAINS” AMONGST OTHER THINGS. COME-ALONGS HAVE TWO “T” SHAPED HANDLES, THE LARGER OF WHICH IS INSET, ALLOWING FOR ONE “T” HANDLE TO BE INSERTED INTO THE OTHER. TO USE A COME-ALONG, AN OFFICER WRAPPED THE CHAIN COMPONENT OF THE HANDCUFF AROUND ONE OF THE DETAINEE’S WRISTS, COMBINING AND TWISTING THE NOW INTERLOCKED HANDLE, THEREBY SHORTENING THE CHAIN. THIS SHORTENING ACTION CAUSED DISCOMFORT AND PAIN FOR THE DETAINEE, PERSUADING HIM OR HER TO “COME-ALONG” BY FORCE. ONE CAN IMAGINE THE ISSUES OFFICERS FACED USING COME-ALONGS, AS IT ONLY CONTROLLED ONE OF THE DETAINEE’S TWO HANDS. THE RESTRAINT “TOOL” WAS EVENTUALLY DISCARDED BY POLICE AS THE TRADITIONAL HANDCUFF ROSE IN PROMINENCE. THIS CHANGE PROVIDED INCREASED SAFETY AND PEACE OF MIND FOR BOTH OFFICERS AND THEIR DETAINEES.
Catalogue Number
P19662209000
Acquisition Date
1966-12
Collection
Museum
Less detail
Other Name
HIGH VOLUME FIRE HOSE / PUMP LENGTH HOSE
Date Range From
1955
Date Range To
1985
Material Type
Artifact
Materials
NYLON, BRASS, RUBBER,
Catalogue Number
P20150010021
  2 images  
Material Type
Artifact
Other Name
HIGH VOLUME FIRE HOSE / PUMP LENGTH HOSE
Date Range From
1955
Date Range To
1985
Materials
NYLON, BRASS, RUBBER,
No. Pieces
1
Length
416.0
Width
38.3
Diameter
17.5
Description
SHORT HIGH VOLUME FIRE HOSE, ALSO KNOW AS PONY LENGTH OR PUMP LENGTH FIRE HOSE. SHORT, WIDE, RED FIRE HOSE. COUPLINGS ON EACH END OF HOSE. ON THE LARGER END (17.5CM DIAMETER) THE CHROME PLATED COUPLING HAS 10.4CM LONG HANDLES AND A STRIPE OF GREEN PAINT NEAR THE CONNECTION WITH THE HOSE. THE HOSE HAS BEEN TRIPLE CLAMPED ONTO THE COUPLING. ON THE OTHER END OF THE HOSE, THE DIAMETER IS 14.0CM, AND THE COUPLING HAS HANDLES THAT ARE 4.7CM LONG. THIS END OF THE HOSE IS ALSO TRIPLE CLAMPED ONTO THE COUPLING. ON EACH END OF THE HOSE, TWO OF THE CLAMPS ARE SMALLER AND ARE STAMPED WITH A REPEATING "* DENVER * COLORADO * USA * BAND * IT *" THE LARGEST CLAMPS, EACH FURTHEST FROM ITS RESPECTIVE COUPLING, STAMPED: "DIXON V. & C. CO. USA 525" ON EITHER SIDE OF THE TWO LARGE BOLT SETS. VERY GOOD OVERALL CONDITION. CHROME PLATING HAS WORN AWAY ON EDGES. LOTS OF SCRATCHES AND GOUGES IN THE METAL HANDLES OF THE COUPLINGS.
Subjects
REGULATIVE & PROTECTIVE T&E
Historical Association
SAFETY SERVICES
History
THIS HIGH VOLUME FIRE HOSE WAS USED BY THE LETHBRIDGE FIRE DEPARTMENT. IN A WRITTEN STATEMENT PROVIDED AT THE TIME OF DONATION, JESSE KURTZ, DEPUTY CHIEF – SUPPORT SERVICES (RETIRED), EXPLAINED THAT THIS HOSE WAS USED “WHEN A FIRE ENGING NEEDED TO CONNECT TO A FIRE HYDRANT AND WAS PARKED RIGHT BESIDE THE HYDRANT. THIS WAS BEFORE WE CARRIED LARGER BUT LIGHTER HOSES ON THE TRUCKS.” IN THE SUMMER OF 2015, COLLECTIONS TECHNICIAN KEVIN MACLEAN, CONDUCTED A SERIES OF INTERVIEWS WITH CURRENT AND FORMER MEMBERS OF THE FIRE DEPARTMENT, INCLUDING: CLIFF “CHARLIE” BROWN (HIRED IN 1966, RETIRED 2004), TREVOR LAZENBY (HIRED IN 1994), AND LAWRENCE DZUREN (HIRED 1959, RETIRED 1992). BROWN EXPLAINED THAT “THIS WAS ONE OF YOUR MAIN PIECES OF EQUIPMENT WHEN YOU WENT TO A FIRE … WE’D HOOK THIS [THE HOSE] TO THE HYDRANT, AND THEN THIS INTO OUR PUMP, SO WE’D BE GETTING 8 INCHES OF WATER INTO OUR PUMP, AND THEN THE PUMP WOULD BOOST THAT LINE, AND WE COULD PUT UP 5 OR 6 LINES … THIS WAS ONLY USED AT LARGE FIRES … WHEN WE HAD TO USE THIS, THERE WAS BIG TROUBLE.” LAZENBY ADDED: “IF THIS WAS IN SERVICE WITH OUR DEPARTMENT, THIS WAS IN SERVICE BEFORE I GOT ON, SO I DON’T KNOW THAT I’VE EVEN EVER ACTUALLY SEEN ONE OF THESE, TO BE HONEST WITH YOU.” DZUREN ELABORATED: “THAT’S WHAT WE WOULD HOOK UP ONTO FROM OUR HYDRANT TO THE PUMP. THE HYDRANT MAN, HE WOULD CONNECT THAT TO THE HYDRANT GATE, TO THE HYDRANT, AND THIS WOULD GO TO THE INPUT SIDE OF THE PUMPER. AND THEN THEY WOULD TURN ON THE WATER WITH THAT NOZZLE AND THEY WOULD SUPPLY WATER TO THE FIRE TRUCK AND HE COULD PUMP IT TO A MULTITUDE OF LINES THAT COME OFF OF THERE.” WHEN ASKED WHY FIREFIGHTERS WOULD WANT TO RUN THE WATER THROUGH THE PUMPER TRUCK, RATHER THAN JUST OFF THE HYDRANT, DZUREN EXPLAINED: “WELL, IF THE HYDRANT PRESSURE IS NOT HIGH ENOUGH TO ACCOMMODATE FIREFIGHTING, LIKE SAY IF OUR HOSE, IF A NOZZLE LIKE THAT, YOU’VE GOT TO HAVE UP TO A HUNDRED POUNDS IN THERE, A HYDRANT NORMALLY DOESN’T HAVE THAT KIND OF HIGH PRESSURE.” SEE PERMANENT FILE FOR FULL INTERVIEW TRANSCRIPTS AND ADDITIONAL INFORMATION ABOUT THE LETHBRIDGE FIRE DEPARTMENT.
Catalogue Number
P20150010021
Acquisition Date
2015-02
Collection
Museum
Images
Less detail
Other Name
PICK-HEADED AXE
Date Range From
1940
Date Range To
1950
Material Type
Artifact
Materials
WOOD, METAL
Catalogue Number
P20150010003
  2 images  
Material Type
Artifact
Other Name
PICK-HEADED AXE
Date Range From
1940
Date Range To
1950
Materials
WOOD, METAL
No. Pieces
1
Height
4.0
Length
89.1
Width
25.5
Description
FIRE AXE OR PICK-HEADED AXE. WOODEN HANDLE WITH METAL HEAD. HANDLE IS UNFINISHED WOOD, WITH A BRIGHT 6.5CM ORANGE STRIPE APPROXIMATELY 1/3 OF THE WAY DOWN THE HANDLE FROM THE HEAD. THE KNOB AND GRIP OF THE AXE CURVES SLIGHTLY AND IS SLIGHTLY WIDER THAN THE REST OF THE HANDLE, UNTIL THE JUNCTION WITH THE METAL HEAD (THE SHOULDER), WHERE THE HANDLE IS THE WIDEST. METAL HEAD HAS A BLADE AND PICK. OVERALL IN FAIR TO GOOD CONDITION. SEVERAL SCRATCHES IN THE WOODEN HANDLE, ESPECIALLY NEAR THE HEAD. THE GRIP AND KNOB IS WELL WORN AND SCUFFED. A LARGE SLIVER OF WOOD IS MISSING FROM THIS AREA, BUT GIVEN THE WEAR PATTERN, THE SLIVER WAS LOST EARLY IN THE AXE'S USE. METAL HEAD IS VERY WORN. IT APPEARS TO HAVE HAD A RED FINISH AT ONE POINT, WHICH IS ALMOST ENTIRELY GONE. REMNANTS OF RED REMAIN ON THE UNDERSIDE OF THE HEAD, WHERE THE HEAD AND HANDLE MEET. BLADE AND PICK OF HEAD ARE BOTH WELL USED AND HAVE LOST THEIR SHARPNESS.
Subjects
REGULATIVE & PROTECTIVE T&E
Historical Association
SAFETY SERVICES
History
THIS FIRE AXE (PICK-HEADED AXE) WAS USED BY THE LETHBRIDGE FIRE DEPARTMENT. IN A WRITTEN STATEMENT PROVIDED AT THE TIME OF DONATION, JESSE KURTZ, DEPUTY CHIEF – SUPPORT SERVICES (RETIRED), EXPLAINED THAT THIS AXE WOULD BE “USED IN FORCIBLE ENTRY, OVER HAUL, VENTILATION [AND] IS STILL USED TODAY, BUT [NOW WE] HAVE FIBERGLASS HANDLES OR COMPOSITE HANDLES.” IN THE SUMMER OF 2015, COLLECTIONS TECHNICIAN KEVIN MACLEAN, CONDUCTED A SERIES OF INTERVIEWS WITH CURRENT AND FORMER MEMBERS OF THE FIRE DEPARTMENT, INCLUDING: CLIFF “CHARLIE” BROWN (HIRED IN 1966, RETIRED 2004), TREVOR LAZENBY (HIRED IN 1994), RAYMOND “RAY” PETIT (HIRED 1965, RETIRED 1998), AND LAWRENCE DZUREN (HIRED 1959, RETIRED 1992). BROWN ADDED “PROBABLY THAT’S WHAT FIREFIGHTERS ARE NOTED FOR, IS AN AXE, BECAUSE AN AXE WAS USED SO MANY TIMES. … WHAT THE HYDRANT KEY COULDN’T DO, THE AXE DID … THIS OLD AXE WAS GOOD. IT WAS A GOOD OLD PRY-BACK, PRY AXE … SOMETIMES WE HAD TO GO TO A FARM FIRE. THEY HAD A POND THERE. WE HAD TO GET THE WATER, SO WE’D CUT A HOLE IN THE ICE WITH OUR AXE.” LAZENBY AGREED: “THIS IS ONE OF THE CLASSIC FIRE SERVICE TOOLS … THIS WAS PROBABLY THE PRIMARY TOOL THAT WE WOULD GRAB OFF THE TRUCK YEARS AND YEARS AGO IF WE HAD TO VENTILATE THE ROOF OF A STRUCTURE. BACK IN THE DAY WE DIDN’T NECESSARILY HAVE A CHAINSAW OR A K-12 SAW TO CUT THROUGH THE SHINGLES AND THE SHEETING AND THE SHIPLAP BOARDS AND SO IT WAS HARD WORK … THESE GET TAKEN OFF THE TRUCK ALL THE TIME BECAUSE WE’RE NOW IN THE HABIT OF TAKING TOOLS WITH US ON MOST CALLS … THESE [AXES] HAVE CHANGED. THE HANDLES ARE NO LONGER WOODEN; THEY’VE GONE TO FIBERGLASS. THEY’RE A BIT LIGHTER. THEY’RE MORE IMPACT-RESISTANT. YOU DON’T GET SLIVERS AND SPLINTERS WITH FIBERGLASS LIKE YOU DO WITH THE OLD. WE USE TO SAND THESE DOWN WITH SANDPAPER. WE WOULD OIL THEM UP A LITTLE BIT TO KEEP THE FINISH NICE AND THE HEADS WOULD RUST LIKE CRAZY, SO AGAIN, LIKE OUR HYDRANT KEY WE WOULD GET THE STEEL WOOL OUT OR SANDPAPER AND SAND IT AND OIL IT TO KEEP IT FROM RUSTING UP. AS OFTEN AS OUR TRUCKS GET WASHED, THESE USED TO BE MOUNTED ON THE EXTERIOR TAILBOARD OF THE TRUCK, SO EVERY TIME WE DROVE THROUGH INCLEMENT WEATHER OR WASHED THE VEHICLE, IT WAS EXPOSED TO ROAD GRIME AND WET.” PETIT ELABORATED: “WE USED THEM QUITE A BIT IF THERE WAS A VENT ON THE BUILDING, TO TEAR THE VENT. SAY THERE WAS A FIRE IN THE ATTIC AND YOU WANTED TO TEAR THE VENTS, WE’D USUALLY USE AN AXE LIKE THIS BECAUSE OF THE PICK SO YOU COULD GET UNDERNEATH THE METAL AND RIP IT … I DEFINITELY USED THEM … MOSTLY HOUSE FIRES, LIKE FIRES IN THE ATTIC AND THERE’S A VENT AND YOU TEAR THE VENT OFF AND SOMETIMES YOU’D TRY TO MAKE THE HOLE BIGGER SO THAT SMOKE AND STUFF CAN GET OUT. BUT LIKE I SAY, EVENTUALLY, WE DIDN’T USE AN AXE TO MAKE A HOLE, WE USED A POWER SAW.” DZUREN AGREED: “IT’S FOR CHOPPING OR FOR GETTING, AGAIN, THROUGH ANY TYPE OF WALL WHERE YOU HAVE TO PUNCTURE A HOLE THROUGH THERE.” SEE PERMANENT FILE FOR FULL INTERVIEW TRANSCRIPTS AND ADDITIONAL INFORMATION ABOUT THE LETHBRIDGE FIRE DEPARTMENT.
Catalogue Number
P20150010003
Acquisition Date
2015-02
Collection
Museum
Images
Less detail
Other Name
HYDRANT WRENCH
Date Range From
1950
Date Range To
2000
Material Type
Artifact
Materials
METAL
Catalogue Number
P20150010011
  2 images  
Material Type
Artifact
Other Name
HYDRANT WRENCH
Date Range From
1950
Date Range To
2000
Materials
METAL
No. Pieces
1
Length
42.5
Width
14.7
Description
METAL HYDRANT WRENCH, NOT ADJUSTABLE. WRENCH IS ROUGHLY AN 'L' SHAPE. ONE END OF THE WRENCH HAS A SINGLE CLAW, USED FOR PRYING. THE OPPOSITE END (THE SHORT END OF THE 'L') HAS A REULEAUX TRIANGLE, A SLIGHT HOOK, AND A SMALL (2.5CM) CIRCLE. IN THE MIDDLE OF THE HANDLE, ON ONE SIDE ONLY, IS A RECTANGULAR PATCH OF LIGHT GREY PAINT. THERE ARE REMNANTS OF LIGHT GREY FINISH ON THE REST OF THE WRENCH. OVERALL IN FAIR CONDITION. VERY RUSTED. GREY FINISH HAS ALMOST ENTIRELY FLAKED OFF. THE RECTANGULAR AREA OF GREY FINISH IS LOOSE.
Subjects
REGULATIVE & PROTECTIVE T&E
Historical Association
SAFETY SERVICES
History
THIS FIRE PLUG WRENCH, OR HYDRANT WRENCH, WAS USED BY THE LETHBRIDGE FIRE DEPARTMENT. IN THE SUMMER OF 2015, COLLECTIONS TECHNICIAN KEVIN MACLEAN, CONDUCTED A SERIES OF INTERVIEWS WITH CURRENT AND FORMER MEMBERS OF THE FIRE DEPARTMENT, INCLUDING: CLIFF “CHARLIE” BROWN (HIRED IN 1966, RETIRED 2004), TREVOR LAZENBY (HIRED IN 1994), RAYMOND “RAY” PETIT (HIRED 1965, RETIRED 1998), AND LAWRENCE DZUREN (HIRED 1959, RETIRED 1992). ACCORDING TO BROWN THIS IS A “GOOD OLD HYDRANT KEY. WE ALL CARRIED ONE ON OUR BELT … IT WAS MADE OF PRETTY DURABLE STEEL. YOU COULD PRY ON THAT THING ALL YOU WANTED. I DON’T EVER REMEMBER ONE BREAKING. YOU COULD USE IT AS A HAMMER, AS A CLUB. WE ALWAYS JOKED – WE’D USE IT AS A WEAPON IF WE EVER GOT INTO TROUBLE WITH OTHER PEOPLE. IT NEVER HAPPENED – JUST A JOKE. IT WAS PROBABLY YOUR MAIN LINE TOOL, BREAK WINDOWS, BREAK DOORS IN. YOU KNOW, WE DIDN’T HAVE A WHOLE LOT OF REAL FANCY TOOLS IN THOSE DAYS BUT THAT HYDRANT KEY WAS VERY IMPORTANT TO US. WE CARRIED THEM ON OUR HYDRANT BELTS.” LAZENBY EXPANDED: “WHEN I WAS HIRED EVERY MEMBER OF THE DEPARTMENT WAS ISSUED ONE OF THESE WHEN YOU GOT YOUR BUNKER GEAR OR YOUR TURNOUTS AND YOUR HELMET. YOU WERE ISSUED A HYDRANT KEY WITH A LEATHER HOLSTER BELT THAT YOU WORE OVER TOP OF YOUR JACKET … NOW THERE WAS A FEW ROLES OR A FEW USES FOR THIS TOOL. NUMBER ONE, FIRST AND FOREMOST, IT IS A HYDRANT KEY WHICH MEANS THAT THIS WAS THE KEY THAT YOU USED TO ESSENTIALLY OPEN THE HYDRANT. THE OPENING AT THE END AWAY FROM THE BEVELED EDGE IS CUT IN THE SAME SIZE AND SHAPE AS THE STEM ON TOP OF THE HYDRANT AND IT WAS SIMPLY LEFTY-LOOSE, RIGHTY-TIGHTY. BUT THIS COULD ALSO BE USED AS A FORCIBLE ENTRY TOOL, PERHAPS AS A TOOL TO FIND A MEANS OF EGRESS IF YOU HAPPEN TO BE TRAPPED, YOU COULD BREAK WINDOWS WITH THIS. YOU COULD USE THE PRYING END TO PRY IF YOU HAD TO. I DON’T RECALL WHAT THE PURPOSE OF THE ROUND OPENING ON THAT KIND OF FLANGE END WAS - I DON’T REMEMBER THAT. BUT I DO REMEMBER THAT THERE WAS A SORT OF A MINDSET AMONG SOME OF THE SENIOR MEMBERS THAT IF YOU LET YOUR HYDRANT KEY BECOME ALL RUSTED AND LOOK A LITTLE BIT DISHEVELED THAT THAT WAS SORT OF LIKE THE MARK OF A POOR FIREFIGHTER, SOMEONE THAT DIDN’T LOOK AFTER THEIR GEAR PROPERLY, AND SO WE USED TO – AT TIMES WE WOULD BREAK OUT SOME STEEL WOOL OR THE PNEUMATIC POLISHER AND ACTUALLY POLISH THESE TO A NICE BRIGHT, SILVERY - LIKE A CHROME SHEEN, ALMOST. SO WHEN THEY ISSUED THEM THEY LOOKED TERRIBLE - THEY WERE UNFINISHED AND IT WAS YOUR JOB TO SORT OF GET IT POLISHED UP AND GET IT INTO SERVICE, SO TO SPEAK.” LAZENBY CONTINUED, SAYING THAT BY 2000 “THESE ARE NO LONGER ISSUED TO INDIVIDUAL MEMBERS … WE’VE EVOLVED IN SOME WAYS IN THAT THE HYDRANT KEY NOW TYPICALLY IS … MOUNTED ON THE BACK OF THE TRUCK … THE WHOLE INDUSTRY IS STARTING TO CHANGE IN THAT WE’RE BECOMING MUCH MORE SAFETY-ORIENTED WHEN IT COMES TO THESE TYPES OF THINGS … THIS BECAME REDUNDANT, AND YOU KNOW, IT WAS A LITTLE BIT SMALL FOR THE JOB THAT IT WAS ASKED TO DO AS WELL. OBVIOUSLY, THE BIGGER YOUR TOOL, THE BETTER PRYING AND STRENGTH AND WEIGHT YOU GET. THIS, YOU RELIED A LOT ON THE PERSONAL STRENGTH OF THE PERSON TO BE ABLE TO USE THIS EFFECTIVELY … WHEREAS WITH THE BIGGER ONES NOW, THEY’RE HEAVIER, THEY’RE A LITTLE BIT LONGER, YOU CAN JUST GET BETTER LEVERAGE NATURALLY.” PETIT AGREED, ADDING THAT HE BELIEVED THE WRENCH “WAS MADE IN LETHBRIDGE. MAYBE LETHBRIDGE IRON WORKS.” DZUREN EXPLAINED THAT THE WRENCH “WAS CARRIED IN A LEATHER HOLSTER TYPE OF THING THAT HUNG AT YOUR SIDE AND IT WAS ONE OF THE THINGS YOU PUT ON RIGHT AWAY, AS SOON AS YOU PUT ON YOUR TURN OUT GEAR … THAT WOULD BE THERE BECAUSE YOU WOULD NEED THAT TO TURN ON YOUR FIRE HYDRANT IF YOU NEEDED THE HYDRANT FOR WATER … AND IT ALSO HAD, THERE WAS A LITTLE, TINY, THE TOP OF THE KEY THERE WAS A LITTLE ROUND THING THAT WAS THERE TO TIGHTEN THE CUP LINKS ON HOSES, IF YOU HAD TO TIGHTEN A HOSE THAT WAS LEAKING.” SEE PERMANENT FILE FOR FULL INTERVIEW TRANSCRIPTS AND ADDITIONAL INFORMATION ABOUT THE LETHBRIDGE FIRE DEPARTMENT.
Catalogue Number
P20150010011
Acquisition Date
2015-02
Collection
Museum
Images
Less detail
Other Name
NORTH WEST MOUNTED POLICE
Date Range From
1890
Date Range To
1910
Material Type
Artifact
Materials
STEEL, LEATHER
Catalogue Number
P19970115001
Material Type
Artifact
Other Name
NORTH WEST MOUNTED POLICE
Date Range From
1890
Date Range To
1910
Materials
STEEL, LEATHER
No. Pieces
1
Length
113 (CHAIN)
Diameter
14 (BALL)
Description
ROUND STEEL BALL ATTACHED TO A STEEL CHAIN WITH A LEG SHACKLE AT THE END. ALSO ATTACHED TO THE TOP OF THE BALL IS AN ADJUSTABLE LEATHER STRAP, USED BY PRISONER TO LIFT THE BALL OFF THE GROUND. MARKED ON THE SURFACE OF THE ANKLE CUFF IS "TOWER (?) PATENT MAY 26, '74, SEPT. 4, '77, MAR. 5, '78, DEC. ?. '79 DEC. 5, '82". HINGE STAMPED "4" ON ONE SIDE AND "D" ON THE OTHER. SURFACE OF BALL IS STAMPED WITH A LARGE "A". LEATHER IS STILL REASONABLY SOFT.
Subjects
REGULATIVE & PROTECTIVE T&E
Historical Association
SAFETY SERVICES
History
DONATION MADE ON BEHALF OF DONORS FATHER, EDWARD E. BUCHANAN, FORMER SENIOR STAFF SERGEANT, ROYAL CANADIAN MOUNTED POLICE AT LETHBRIDGE FROM MAY 1944 TO NOV. 1950. ACCORDING TO DONOR, ITEM BELONGED TO THE NORTH WEST MOUNTED POLICE AT LETHBRIDGE, BUT WAS GIVEN TO THE LETHBRIDGE JAIL WHEN IT OPENED IN APPROX. 1909. USED TO KEEP A PRISONER IMMOBILE IN THE UNFENCED PRISON YARD. MR. BUCHANAN WAS A MEMBER OF THE ALBERTA PROVINCIAL POLICE FROM 1919 UNTIL 1932 WHEN HE TRANSFERED TO ROYAL CANADIAN MOUNTED POLICE. RETIRED IN 1950, THEN BECAME DIRECTOR OF CORRECTIONS FOR THE PROVINCE OF ALBERTA. FATHER WAS GIVEN THE ITEMS BY WARDEN OF LETHBRIDGE'S JAIL, HERB HOLT IN THE LATE 1950'S. FOR DONOR'S PERSONAL MEMORIES AND HISTORY OF DONATIONS SEE PERMANENT FILE. SEE P20020090001-GA FOR COMPLETE BIOGRAPHY OF EDWARD BUCHANAN. **** ON 18 JANUARY 2013, BALL AND CHAIN (P19970115001) AND OREGON BOOT (P19970115002) DONOR TED BUCHANAN (TB) VISITED THE GALT TO PARTICIPATE IN A COLLECTIONS-REQUESTED INTERVIEW. THE INTENT OF THE INTERVIEW WAS TO CLARIFY DETAILS SURROUNDING BUCHANAN’S 1998 ACQUISITION AND POSSESSION OF A HANGMAN’S NOOSE (P19990088001). ADDITIONAL DETAILS REGARDING BUCHANAN’S OWNERSHIP OF THE BALL AND CHAIN AND THE OREGON BOOT WERE DISCUSSED, QUESTIONS POSED BY KEVIN MACLEAN (KM). RELEVANT EXCERPTS FROM THE INTERVIEW ARE BELOW. FOR MORE INFORMATION, INCLUDING THE INTERVIEW IN ITS ENTIRETY, PLEASE SEE P19990088001’S PERMANENT FILE. TB: “WELL HE HAD A TRUNK IN THE BASEMENT WHERE HE KEPT A LOT OF THIS, THE OLD MEMORABILIA THAT HE HAD. AND AS MUCH OF IT AS I CAN REMEMBER WAS ALL, PRETTY MUCH EVERYTHING WAS KEPT IN THAT BIG ROOM, TRUNK.” TB: “HE HAD TAKEN POSSESSION OF THE BALL AND CHAIN AND THE OREGON BOOT WHILE HE WAS STILL WITH THE RCMP HERE (LETHBRIDGE). IT CAME OUT OF THE OLD RCMP DETACHMENT BUILDING THAT WAS THERE BEFORE THEY BUILT THEIR NEW FACILITY, THEY HAD FOUR OR FIVE JUST LIKE HOUSES THAT WERE ON THE WEST SIDE OF THE PROPERTY, APPROXIMATELY WHERE THE PRESENT POLICE STATION IS. AND THEN ON THE WEST SIDE OF THAT PROPERTY, BECAUSE THEY OWNED THE WHOLE FOUR CITY BLOCKS THERE, WHERE CITY HALL IS, THE YATES MEMORIAL CENTER, AND THE SENIORS’ CENTER AND THE CURLING RINK AND ALL THAT. THAT WAS ALL RCMP PROPERTY; WELL IT WAS NORTH WEST MOUNTED POLICE PROPERTY ORIGINALLY. AND WAY OFF ON THE EAST SIDE WAS WHERE THE STABLES WERE, BECAUSE THE ORIGINAL NORTH WEST MOUNTED POLICE ONLY WAY TO TRAVEL WAS BY HORSEBACK UNTIL THEY STARTED BRINGING IN AUTOMOBILES AND SO THEY HAD QUITE A STABLE THERE. WELL THEN THEY HAD TO BUILD A JAIL OUT HERE, SO THEY BUILT A JAIL ADJACENT TO THE STABLES ON THE EAST SIDE OF THE PROPERTY AND THAT’S WHERE THE BALL AND CHAIN AND THE OREGON BOOT CAME INTO PLAY, BECAUSE THE LAND DOWN THERE WAS GOOD GARDENING LAND AND THEY HAD BIG GARDEN CROPS OUT THERE AND THEY WOULD HAVE SOME OF THE INMATES GO OUT THERE AND HOE THE GARDEN AND LOOK AFTER THE VEGETABLES AND DO THE WATERING AND WHATEVER AND THIS IS WHY THEY HAD TO RESTRAIN THEM.” KM: “DO YOU REMEMBER ANY SPECIFIC STORIES WITH THAT BOOT, WHO WORE IT OR ANYTHING, LIKE THAT?” TB: “NO.” KM: “SO ALL YOU KNOW IS THAT THOSE ITEMS CAME DIRECTLY FROM THE BARRACKS?” TB: “THAT’S RIGHT, IN FACT THE REASON THAT DAD SAID HE TOOK POSSESSION OF THEM BECAUSE WHEN THEY TORE DOWN THE OLD STABLES AND THE OLD JAIL THEY WERE JUST DESTROYING IT, EVERYTHING WAS JUST GOING TO THE CITY DUMP AND HE HAPPENED TO SEE SOME OF THESE THINGS AND HE THOUGHT THEY WERE THINGS THAT PEOPLE WOULD BE INTERESTED IN VIEWING IN THE FUTURE.
Catalogue Number
P19970115001
Acquisition Date
1997-12
Collection
Museum
Less detail
Other Name
OREGON BOOT
Date Range From
1890
Date Range To
1910
Material Type
Artifact
Materials
STEEL, LEATHER
Catalogue Number
P19970115002
Material Type
Artifact
Other Name
OREGON BOOT
Date Range From
1890
Date Range To
1910
Materials
STEEL, LEATHER
No. Pieces
3
Description
DARK BROWN LEATHER BOOT WITH A STEEL PLATE FASTENED TO THE BOTTOM OF THE HEEL THAT HAS A STEEL ROD ON EACH SIDE ATTACHED TO A STEEL RING AROUND THE OPENING OF THE BOOT. OTHER TWO PIECES ARE WEIGHTS THAT ARE EACH HALF OF A WEIGHTED RING THAT IS CLAMPED AROUND PRISONERS LEG, BUT RESTS ON THE STEEL FRAME. BOOT HAS A HOLE IN THE TOE, AND IS MISSING LACES.
Subjects
REGULATIVE & PROTECTIVE T&E
Historical Association
SAFETY SERVICES
History
BOOT DESIGNED AND PRODUCED IN THE 1860S TO PREVENT INMATES FROM ESCAPING A FACILITY IN SALEM OREGON. IT WAS NOTED THAT PRISONERS ON OUTSIDE EXERCISE WERE ESCAPING WHEN SHAKLED TO THE TRADITIONAL BALL AND CHAIN. PRISONERS LEARNED THEY COULD PICK UP THE BALL AND, IF DESIRED, RUN AND CLIMB, ALLOWING THEIR ESCAPE. J.C. GARNER INVENTEDTHE BOOT DEVICE. IT IS CLAIMED THAT HE BASED THE DESIGN ON ANKLE BRACES USED TO RESTRAIN SLAVES IN THE AMERICAN SOUTH. HE HAD IT WAS MANUFACTURED IN PRISON SHOPS AND USED ON CONVICTS WHEN OUTSIDE THEIR CELLS. HE LATER PATENTED HIS DEVICE, BUT AS ITS POPULARITY SPREAD AMONGST LAW ENFORCEMENT AGENCIES IT WAS MADE BY DIFFERENT MANUFACTURERS, WHO MADE IT IN SLIGHTLY DIFFERENT CONFIGURATIONS TO AVOID PATENT INFRINGEMENT. THE BOOT DECLINED IN USE AFTER THE 1920S. ACCORDING TO DONOR’S FATHER, EDWARD BUCHANAN, BOOT WAS WORN BY A PRISONER AT NORTH WEST MOUNTED POLICE BARRACKS IN LETHBRIDGE. PRISONER WAS CONVICTED OF MURDER AND SENTENCED TO DEATH BY THE COURT. HANGING ARRANGEMENTS WERE MADE FOR A SCAFFOLD TO BE MADE AT BARRACKS, AS THERE WAS NONE PRESENT. A SLIGHT CHANGE WAS MADE TO THE TRAP DOOR IN THE HAY LOFT OF THE STABLE BY PLACING A STEEL RING IN THE WOOD WORK ABOVE TO FASTEN THE ROPE ON AND THIS WAS WHAT WOULD SERVE THE SENTENCE OF THE COURT. THE EXECUTION WAS CARRIED OUT AT THE BREAK OF DAY, AFTER WHICH THE PRISONER WAS BURIED IN AN UNMARKED GRAVE. EVENT (JAN. 1911) BECAME ONLY EXECUTION EVER CARRIED OUT WITHIN BOUNDARIES OF CITY OF LETHBRIDGE. PRISONER WAS IMMOBOLIZED WHEN HE PUT THE BOOT ON, HAD WEIGHTS APPLIED OVER BRACKET, ENSURING HE COULD WALK, BUT NOT RUN WHILE OUTSIDE. FOR MORE INFORMATION SEE MAGAZINE ARTICLES IN PERMANENT FILE ON MURDER CASE AND CONVICTION AS WELL AS BOOT'S GENERIC ORIGINS, AND P19970115001-GA. SEE P20020090001-GA FOR COMPLETE BIOGRAPHY OF EDWARD BUCHANAN. **** ON 18 JANUARY 2013, BALL AND CHAIN (P19970115001) AND OREGON BOOT (P19970115002) DONOR TED BUCHANAN (TB) VISITED THE GALT TO PARTICIPATE IN A COLLECTIONS-REQUESTED INTERVIEW. THE INTENT OF THE INTERVIEW WAS TO CLARIFY DETAILS SURROUNDING BUCHANAN’S 1998 ACQUISITION AND POSSESSION OF A HANGMAN’S NOOSE (P19990088001). ADDITIONAL DETAILS REGARDING BUCHANAN’S OWNERSHIP OF THE BALL AND CHAIN AND THE OREGON BOOT WERE DISCUSSED, QUESTIONS POSED BY KEVIN MACLEAN (KM). RELEVANT EXCERPTS FROM THE INTERVIEW ARE BELOW. FOR MORE INFORMATION, INCLUDING THE INTERVIEW IN ITS ENTIRETY, PLEASE SEE P19990088001’S PERMANENT FILE. TB: “WELL HE HAD A TRUNK IN THE BASEMENT WHERE HE KEPT A LOT OF THIS, THE OLD MEMORABILIA THAT HE HAD. AND AS MUCH OF IT AS I CAN REMEMBER WAS ALL, PRETTY MUCH EVERYTHING WAS KEPT IN THAT BIG ROOM, TRUNK.” TB: “HE HAD TAKEN POSSESSION OF THE BALL AND CHAIN AND THE OREGON BOOT WHILE HE WAS STILL WITH THE RCMP HERE (LETHBRIDGE). IT CAME OUT OF THE OLD RCMP DETACHMENT BUILDING THAT WAS THERE BEFORE THEY BUILT THEIR NEW FACILITY, THEY HAD FOUR OR FIVE JUST LIKE HOUSES THAT WERE ON THE WEST SIDE OF THE PROPERTY, APPROXIMATELY WHERE THE PRESENT POLICE STATION IS. AND THEN ON THE WEST SIDE OF THAT PROPERTY, BECAUSE THEY OWNED THE WHOLE FOUR CITY BLOCKS THERE, WHERE CITY HALL IS, THE YATES MEMORIAL CENTER, AND THE SENIORS’ CENTER AND THE CURLING RINK AND ALL THAT. THAT WAS ALL RCMP PROPERTY; WELL IT WAS NORTH WEST MOUNTED POLICE PROPERTY ORIGINALLY. AND WAY OFF ON THE EAST SIDE WAS WHERE THE STABLES WERE, BECAUSE THE ORIGINAL NORTH WEST MOUNTED POLICE ONLY WAY TO TRAVEL WAS BY HORSEBACK UNTIL THEY STARTED BRINGING IN AUTOMOBILES AND SO THEY HAD QUITE A STABLE THERE. WELL THEN THEY HAD TO BUILD A JAIL OUT HERE, SO THEY BUILT A JAIL ADJACENT TO THE STABLES ON THE EAST SIDE OF THE PROPERTY AND THAT’S WHERE THE BALL AND CHAIN AND THE OREGON BOOT CAME INTO PLAY, BECAUSE THE LAND DOWN THERE WAS GOOD GARDENING LAND AND THEY HAD BIG GARDEN CROPS OUT THERE AND THEY WOULD HAVE SOME OF THE INMATES GO OUT THERE AND HOE THE GARDEN AND LOOK AFTER THE VEGETABLES AND DO THE WATERING AND WHATEVER AND THIS IS WHY THEY HAD TO RESTRAIN THEM.” KM: “DO YOU REMEMBER ANY SPECIFIC STORIES WITH THAT BOOT, WHO WORE IT OR ANYTHING, LIKE THAT?” TB: “NO.” KM: “SO ALL YOU KNOW IS THAT THOSE ITEMS CAME DIRECTLY FROM THE BARRACKS?” TB: “THAT’S RIGHT, IN FACT THE REASON THAT DAD SAID HE TOOK POSSESSION OF THEM BECAUSE WHEN THEY TORE DOWN THE OLD STABLES AND THE OLD JAIL THEY WERE JUST DESTROYING IT, EVERYTHING WAS JUST GOING TO THE CITY DUMP AND HE HAPPENED TO SEE SOME OF THESE THINGS AND HE THOUGHT THEY WERE THINGS THAT PEOPLE WOULD BE INTERESTED IN VIEWING IN THE FUTURE.
Catalogue Number
P19970115002
Acquisition Date
1997-12
Collection
Museum
Less detail
Date Range From
1950
Date Range To
2000
Material Type
Artifact
Materials
METAL, PLASTIC, RUBBER
Catalogue Number
P20150010010
  2 images  
Material Type
Artifact
Date Range From
1950
Date Range To
2000
Materials
METAL, PLASTIC, RUBBER
No. Pieces
1
Height
16.0
Length
50.3
Width
27.6
Description
FIRE-HOSE NOZZLE. SILVER COLOURED METAL, BLACK RUBBER AND PLASTIC. TWO LARGE BLACK RUBBER HANDLES COME OUT FROM THE CYLINDRICAL PORTION OF THE NOZZLE, MAKING A ROUNDED-CORNER SQUARE, WITH THE BODY OF THE NOZZLE GOING DOWN THE MIDDLE. "L" SHAPED METAL HANDLE WHERE BLACK RUBBER HANDLE MEETS BODY OF NOZZLE. DARK GREY COUPLING IN THE MIDDLE OF THE NOZZLE ALLOWS THE LOWER HANDLE PORTION TO BE REMOVED. STAMPED INTO THE DARK GREY METAL: "AKRON NPSH". SILVER METAL ADJUSTABLE HANDLE ALLOWS THE NOZZLE TO BE OPENED OR CLOSED AND IS EMBOSSED WITH "CLOSED" AND "OPEN" ON OPPOSITE SIDES OF THE HANDLE. STAMPED INTO THE METAL NEAR THIS OPEN/CLOSE LEVER IS "AKRON" AND THERE IS ALSO A BLACK STICKER OF "A1". ON THE UNDERSIDE OF THIS LEVER IS A SQUARE PATCH OF MEDIUM BLUE PAINT AND SCRATCHED INTO THE METAL IS "16 B". ABOVE THIS IS AN ADJUSTABLE RING, STAMPED WITH THE FOLLOWING MEASUREMENTS: "120 3/4; 150 7/8; 200 1; 250 1 1/8" (THESE MEASUREMENTS INDICATE HOW MANY GALLONS OF WATER PER MINUTE THE NOZZLE WILL EXPEL). IT IS ALSO STAMPED WITH: "FLUSH" AND "AKRON TURBOJET". THIS RING HAS 24 RAISED SQUARES FOR GRIPPING. BEYOND THIS IS ANOTHER ADJUSTABLE RING, STAMPED WITH "I V V", WHERE THE FIRST 'V' IS EXAGERATED AND EXTRA WIDE. (ADJUSTING THIS RING ADJUST THE FLOW OF WATER FROM A STRAIGHT STREAM TO A MIST OR FOG). THE BACKGROUND OF THESE STAMPS IS RED. BLACK RUBBER ABUTS THE ADJUSTABLE RING. THE RUBBER SECTION IS 7.7CM LONG AND IS TEXTURED, FIRST WITH A WIDE SET OF LINES, THEN ON THE VERY EDGE OF THE NOZZLE WITH A VERY CLOSE SET SECTION OF LINES. EMBOSSED ON THIS RUBBER SECTION IS: "US PAT. 3,387,791 - CAN PATENTED 1969". THE VERY END OF THE NOZZLE, WHERE THE WATER COMES OUT, HAS 24 BLACK PLASTIC TEETH. OVERALL IN VERY GOOD CONDITION. SIGNS OF WEAR ON THE SILVER FINISH, ESPECIALLY ON ADJUSTABLE OPEN/CLOSED HANDLE AND THE "L" SHAPED HANDLE.
Subjects
REGULATIVE & PROTECTIVE T&E
Historical Association
SAFETY SERVICES
History
THIS FIRE-HOSE NOZZLE WAS USED BY THE LETHBRIDGE FIRE DEPARTMENT. IN THE SUMMER OF 2015, COLLECTIONS TECHNICIAN KEVIN MACLEAN, CONDUCTED A SERIES OF INTERVIEWS WITH CURRENT AND FORMER MEMBERS OF THE FIRE DEPARTMENT, INCLUDING: CLIFF “CHARLIE” BROWN (HIRED IN 1966, RETIRED 2004), TREVOR LAZENBY (HIRED IN 1994), AND LAWRENCE DZUREN (HIRED 1959, RETIRED 1992). BROWN EXPLAINED THAT THIS NOZZLE WAS “PROBABLY ONE OF THE MOST DANGEROUS WEAPONS WE’VE GOT ON THAT DEPARTMENT. YOU HAD TO HAVE TWO GUYS HOLDING THAT THING … IT WAS FOR LARGER FIRES. YOU DIDN’T TAKE THAT INTO FIRES, BECAUSE YOU COULDN’T CONTROL IT. YOU’D TAKE IT MAYBE TO A DOOR OR SOMETHING LIKE THAT. THIS HERE NOZZLE – YOU’D TURN – IT WOULD BE A SPRAY OR A STRAIGHT STREAM. IF YOU PUT IT ON NON-STRAIGHT STREAM, IT WOULD DRAG YOU ALL OVER THE GROUND. I CAN REMEMBER SEEING GUYS ON THIS NOZZLE, SNAKING BACK AND FORTH LIKE THAT, AND THEM HANGING ONTO THE NOZZLE BEFORE THEY COULD GET THEIR BALANCE TO SHUT IT OFF … YOU HAD TO HAVE TWO GUYS ON IT, AND IF BY CHANCE, THEY FELL OFF IT, AND THEY LET IT LOOSE, WELL, YOU CAN IMAGINE. THAT THING PROBABLY WEIGHED … I’M GUESSING 40 POUNDS; IT WAS A VERY HEAVY NOZZLE. IF IT HIT ANYBODY … IT WOULD BE PRETTY HARD. SO, IF YOU DIDN’T HAVE TWO GUYS ON THAT NOZZLE, YOU’D TAKE IT AND YOU’D MAKE A CIRCLE ON IT, AND YOU’D SIT ON THE CIRCLE WITH THE NOZZLE LIKE THAT, AND JUST THAT LITTLE CIRCLE WOULD SORT OF KNOCK THE PRESSURE, SO IT DIDN’T ALL COME OUT OF THE NOZZLE. IT WOULD BE BACK IN THAT LITTLE CIRCLE SO ONE GUY COULD HOLD IT. BUT YOU’D PRETTY WELL HAVE TO SIT ON THAT NOZZLE. AND, AFTER YOU WERE ON THAT NOZZLE FOR ABOUT 15 MINUTES, YOU WERE JUST WIPED. IT WAS LIKE FIGHTING A TOUGH LITTLE CALF. BUT THAT WAS JUST MORE OR LESS FOR THE BIG FIRES, AND FOR THE FIRES YOU COULDN’T GET INTO.” LAZENBY EXPANDED SAYING: “IT’S A TWO AND A HALF INCH NOZZLE AND THIS WAS NEARING THE END OF ITS LIFE SPAN WHEN I WAS HIRED. THIS IS A FOG NOZZLE, WHICH MEANS THAT YOU CAN CHANGE THE PATTERN OF THE WATER FROM A RELATIVELY SMOOTH OR STRAIGHT STREAM INTO A 75 DEGREE FOG FOR YOUR PROTECTION. BEING A TWO AND HALF INCH NOZZLE, THIS CAN FLOW AN AWFUL LOT OF WATER … I BELIEVE THE ERGONOMIC PLASTIC HANDLES WERE JUST FOR ERGONOMICS AND EASE OF HOLDING ON TO THAT. THIS HOSE WAS BIG ENOUGH THAT TYPICALLY ONE PERSON WOULDN’T WANT TO OPERATE THAT BY THEMSELVES, UNLESS YOU’RE A REALLY BIG, STRONG GUY. EVEN EMPLOYING WHAT WAS CALLED THE KEENAN HOSE LOOP AND ACTUALLY ROTATE THE NOZZLE UNDERNEATH, AROUND AND UNDERNEATH ITSELF, UNDER THE HOSE AND YOU WOULD SIT ON THE CROSS OF THE HOSE SO THAT WOULD BEAR ALL THE NOZZLE REACTION AND ALL YOU WOULD HAVE TO DO IS DIRECT THE STREAM … GOOD NOZZLE, BUT QUITE HEAVY AND WE WERE GOING AWAY FROM THESE IN FAVOUR OF A NEWER, PISTOL-GRIP STYLE OF NOZZLE WHERE IT WAS ACTUALLY LIKE A PISTOL HANDLE WITH THE BALE FIXED ON TOP THAT IT JUST GAVE YOU A LITTLE BIT EASIER USE, LESS CUMBERSOME … I NEVER ACTUALLY USED ONE OF THESE EXCEPT FOR IN TRAINING, BUT THEY WERE ON OUR BACKUP ENGINES – THEY WEREN’T FRONT LINE, BUT THEY WERE ON THE BACKUP ENGINES WHEN I STARTED.” DZUREN ADDED: “THERE’S USUALLY EITHER TWO OR THREE GUYS, DEPENDING ON WHERE YOU WERE USING IT. BECAUSE THE PRESSURE ON THAT, YOU HAD TO HAVE FAIRLY HIGH PRESSURE TO HAVE THAT EVEN FUNCTION PROPERLY. SO YOU WOULD NEED TO HAVE ONE GUY THAT WOULD OPERATE THIS TRIGGER VALVE HERE, OR THE SPRAY VALVE, AND SOMEBODY WOULD BE BEHIND YOU MAKING SURE THAT IT DIDN’T GET AWAY ON YOU, BECAUSE IF A HOSE GOT AWAY ON YOU WITH IT RUNNING, IT WOULD … IT COULD BREAK A PERSON’S LEG OR KILL A PERSON … IF IT GOT AWAY FROM THEM.” SEE PERMANENT FILE FOR FULL INTERVIEW TRANSCRIPTS AND ADDITIONAL INFORMATION ABOUT THE LETHBRIDGE FIRE DEPARTMENT.
Catalogue Number
P20150010010
Acquisition Date
2015-02
Collection
Museum
Images
Less detail
Other Name
HOUSE ALARM SYSTEM
Date Range From
1908
Date Range To
1973
Material Type
Artifact
Materials
STEEL, GLASS, BRASS
Catalogue Number
P19760096000
Material Type
Artifact
Other Name
HOUSE ALARM SYSTEM
Date Range From
1908
Date Range To
1973
Materials
STEEL, GLASS, BRASS
No. Pieces
32
Height
31.1
Length
8.3
Width
18.4
Description
.1 HOUSE ALARM BOX. ABOVE DIMENSIONS. STEEL, GLASS, BRASS. PAINTED RED. BOX IN PENTAGONAL SHAPED WITH ROUND CASEMENT IN FRONT FACE. A COG-WHEEL BRASS MECHANISM IS IN THE CASEMENT. CASEMENT FACE IS GLASS EDGED WITH COILED GOLD WIRE MOTIF. A KNOBBED BRASS LEVER IS ON MIDDLE RIGHT SIDE OF BOX. BOX FEATURES A VARIETY OF CIRCUIT WIRE CONNECTORS. BACK SIDE FEATURES 3 HOLES. BOX IS EMBOSSED AT TOP CENTRE WITH A CLENCHED FIST SYMBOL AND "GAMEWELL CO." .2 HOUSE ALARM GONG AND KEY WINDER. 84.4 CM HT. X 12.1 CM TH. X 33.0 CM WTH. X 35.6 CM DIA. BRASS, OAK WOOD. 2 PIECES. NATURAL COLOURS. CIRCULAR BRASS GONG IS MOUNTED ON OAK FRAME AND CASE. TOP OF CASE IS CONVEX WITH 6 CARVED BALLS ALONG TOP EDGE. A BRASS COG-WHEEL MECHANISM IS INSIDE CASE (ABOVE GONG) BEHIND CRACKED GLASS DOOR. KEY WINDER FITS IN KEYHOLE AT BOTTOM LEFT OF GLASS DOOR. BRASS KEY WINDER IS FLANGED. 4 WIRES AND A RING FOR HANGING PROTRUDE FROM TOP OF GONG CASE. A LABEL SCREWED ONTO DOOR STATES: "THE NORTHERN ELECTRIC MANUFACTURING COMPANY LIMITED. .3 PUNCH REGISTER. 17.3 CM HT. X 12.7 CM WTH. X 22.9 CM LTH. BRASS, WOOD, GLASS. 7 PIECES. BASE PAINTED BLACK. REGISTER IS A KEY-WOUND BRASS COG-WHEEL MECHANISM CONTAINED IN A BRASS AND GLASS CASE. KEY WINDER IS MISSING. REGISTER IS MOUNTED ON A HOLLOW PAINTED WOOD BASE. MECHANISM OPERATES A ROLL OF PAPER TAPE MOUNTED IN A BRASS SPOKED REEL AND FEED THROUGH A PUNCH AND ALONG A GUIDE PLATE. A SMALL (3.6 CM HT. X 3.8 CM DIA.) BRASS CUT SITS BELOW PUNCH HEAD TO CATCH PIECES OF PUNCHED OUT PAPER, AS TAPE IS FED THROUGH AND PUNCHED TO RECORD FIRE CALLS. TAPE REEL DIA 12.7 CM LABEL ENGRAVED ON CASE ABOVE PUNCH HEAD READS: "HARRINGTON-SEABERG MOLINE, ILLINOIS". THE PUNCH REGISTER IS WIRED TO AN ELECTRONIC SYSTEM AND OUTSIDE FIRE ALARM BOXES AT VARIOUS STREET LOCATIONS. .4 TAPE TAKE-UPS. 22.0 CM HT. X 7.2 CM WTH. X 15.0 CM LTH. BRASS, STEEL. 2 UNITS (6 PIECES). BLACK FINISH ON STEEL. SERIAL NO'S. 105662, 105793. 2 IDENTICAL UNITS, EACH CONSISTING OF A KEY-WOUND MECHANISM IN A BLACK STEEL CASE. A TAKE-UP TRIP LEVER IS MOUNTED ON THE KEY WIND POST OF EACH UNIT. A BRASS SPOKED REEL IS GEARED TO THE MECHANISM AND TRIP LEVER ON EACH UNIT, TO TAKE UP THE USED, PUNCHED TAPE COMING FROM THE PUNCH REGISTER. SPOKED REEL DIA. 12.7 CM. ENGRAVED LABELS ON CASES FEATURE CLENCHED FIST AND READ: "GAMEWELL THE GAMEWELL CO., NEWTON, MASS." AND SERIAL NUMBERS. THESE ARE COMPANION UNITS TO THE PUNCH REGISTER. .5 KEY WINDER. 0.5 CM TH. X 1.8 CM WTH. X 8.6 CM LTH. BRASS, STEEL. NATURAL COLOUR. RATCHET-STYLE SQUARE KEY FOR WINDING SPRINGS ON TAPE TAKE-UP UNITS. KEY RATCHET TENSION HAS BEEN REINFORCED WITH STEEL LEAF SPRING MOUNTED WITH BRASS WIRE AND SOLDER. .6 PACKAGE OF PAPER TAPES. 15.5 CM HT. X 11.5 CM DIA.PAPER, WOOD. 6 PIECES. 6 PAPER TAPE ROLLS TO REFILL PUNCH REGISTER ARE WOUND ON WOOD CORES AND WRAPPED IN BROWN PAPER. PACKAGE HAS BEEN OPENED. EACH ROLL IS 2.5 CM WIDE. .7 RELAY. 7.0 CM HT. X 9.4 CM WTH. X 17.7 CM LTH. SOAPSTONE, CORDAGE, BRASS, STEEL, BAKELITE, WAX. NATURAL COLOURS. RELAY IS MOUNTED ON A RECTANGULAR SOAPSTONE BASE. MOUNT HOLES ON UNDERSIDE OF BASE ARE PLUGGED WITH WAX. RELAY FEATURES BAKELITE INSULATED COILS, BRASS WIRE CONNECTORS AND FITTINGS, AND A SPARK GAP ADJUSTABLE FOR WIDTH AND TENSION (BY COIL SPRING & CORD). .8 TEST SWITCH. 4.9 CM TH. X 9.6 CM WTH. X 13.5 CM LTH. BRASS, STEEL, MASONITE, BAKELITE. BLACK FINISH ON STEEL AND MASONITE. TELEGRAPH KEY-STYLE CIRCUIT TEST SWITCH, WIRED IN-LINE AND USED TO TEST HOUSE LARM BOX CIRCUIT. KEY IS BRASS WITH BAKELITE KNOB, MOUNTED ON STEEL BASE, MASONITE BASE PLATE, BRASS MOUNTING BOLTS. .9 VOLTAGE REGULATOR SWITCH. 12.0 CM HT. X 20.5 CM DIA. BRASS, CAST IRON, STEEL, CERAMIC. 3 PIECES. BLACK PAINTED BASE. "SERIAL #172836" UNDERSIDE OF BASE. SWITCH CONSISTS OF BRASS WHEEL-STYLE HANDLE ATTACHED WITH SET SCREW, BRASS FACE PLATE, AND CERAMIC/BRASS/STEEL/IRON BASE. BASE FEATURES 3 SCREW LUGS, 2 WIRE CONNECTORS AT SIDE, TURNING STEEL CENTRE SHAFT, CERAMIC INSULATED BRASS CONTACTS ON UNDERSIDE, SERIAL NO. PLATE ON UNDERSIDE, AND ROTATING CONTACT BETWEEN BRASS CONTACTS & CENTRE SHAFT. BOTH FACE PLATE AND BASE ARE EMBOSSED WITH DIRECTIONAL ARROWS AND: "TO LOWER (AND) RAISE VOLTAGE, WARD LEONARD ELECTRIC CO., BRONXVILLE, N.Y., U.S.A.", AND: "TO RAISE RESISTANCE". .10 D.C. VOLTMETER. 10 CM HT. X 20.2 CM DIA. BRASS, GLASS. BLACK PAINTED CASE/FACE. METER FEATURES BRASS/GLASS FACE, BLACK PAINT TIM ON FACE, AND INCREMENTS FROM 0-150 INSIDE GLASS FACE. METER IS NUMBERED "15522" (INSIDE GLASS FACE). EMBOSSED ON FACE: "WAGNER ELECTRIC MFG. CO., TYPE-D., ST. LOUIS, U.S.A." THIS IS A COMPANION UNIT TO THE VOLTAGE REGULATOR. .11 D.C. AMMETERMETER IS SIMILAR IS ALMOST ALL RESPECTS TO D.C. VOLTMETER DESCRIBED PREVIOUSLY AND IS ALSO A COMPANION UNIT TO THE VOLTAGE REGULATOR. INCREMENTS ARE 0-500 MILLI-AMPS, AND METER IS NUMBERED "15571" INSIDE GLASS FACE. .12 RECTIFIER. 13.5 CM HT. X 12.7 CM WTH. X 27.9 CM LTH. BRASS, STEEL, BAKELITE, WIRE. BLACK COLOUR. "STYLE NO. 947766-A" ON PLATE. ITEM CONSISTS OF TWIN COILS, ANOTHER COIL AND A CIRCUIT PANEL ALL MOUNTED ON STEEL CHANNEL. BASE AND INTERCONNECTED WITH INSULATED WIRES. WIRE CONNECTORS AND OTHER ELECTRICAL FURNISHINGS ARE BRASS. A STEEL SPECIFICATION PLATE IS MOUNTED ON TOP OF THE TWIN COILS AND FEATURES A CLENCHED FIST SYMBOL, AND READS: "RECTOX RECTIFIER". OTHER INFORMATION INCLUDES: "A.C. VOLTS 105-115-125, D.C. VOLTS 30-45-60, .60 CYC., STYLE NO., .115 AMPS, LICENSED UNDER PATENT 1.640.335, ETC., WESTINGHOUSE ELECTRIC & MFG. CO.", ETC. .13. 15 CM TH. X 31 CM WTH. X 56 CM LTH. BRASS, STEEL, BAKELITE, RUBBER, WOOD, GLASS, WIRE WITH BRAID COVER. BLACK.UNIT CONSISTS OF SMALL VOLTAGE REGULATOR WITH WHEEL CONTROL AND 0-500 MILLI-AMP D.C. AMMETER MARKED: "TRIPLETT, MODEL 521" MOUNTED ON BOARD WITH EMBOSSED BRASS PLATE "GONGS". 4 MOUNTING BOLTS, 1 AT EACH CORNER. GONG AND ELECTRICAL CIRCUIT ON REVERSE SIDE.
Subjects
REGULATIVE & PROTECTIVE T&E
Historical Association
SAFETY SERVICES
History
SYSTEM WAS LOCATED IN OPERATOR'S OFFICE IN FIRE HALL NO. 1, BUILT 1908-09 BY SMITH BROS. & WILSON, ARCHITECT: J.A. MCDONALD. WHEN A PASSERBY PULLED THE STREET ALARM, THE BOX NO. WOULD REGISTER AS PUNCHED HOLES ON PAPER TAPE. FIRE OPERATOR CHECKED NUMBER AGAINST A BOX REGISTER & WROTE OUT NUMBER FOR FIREMEN. OPERATOR THEN PRESSED HOUSE ALARM BOX LEVER TO TRIGGER HOUSE ALARM GONG AND ALERT DUTY SHIFT FIREFIGHTER CREW TO RESPOND TO FIRE. SYSTEM OPERATED ON 100 M.A. AT 48 VOLTS. *** UPDATE JUNE 2012 *** IN JUNE 2012, THE GALT DEVELOPED A SMALL EXHIBIT TO COMMEMORATE AN ANNIVERSARY CELEBRATED BY THE LETHBRIDGE FIRE DEPT. MUCH OF THE EXHIBIT’S CONTENT CENTRED ON THE GALT’S COLLECTION OF FIRE ALARM BOX/SYSTEM OBJECTS. TECHNICAL DATA WAS SOURCED DIRECTLY FROM PERSONS INVOLVED WITH THE PENNSYLVANIA FIRE MUSEUM. NEW INFORMATION ON THE USE OF THE HOUSE FIRE ALARM BOX WAS PROVIDED IN JUNE 2012 BY RETIRED FIRE CHIEF LAWRENCE DZUREN. DZUREN STATED IN 2012 THAT THE BOX’S LEVER WAS PULLED EVERY TIME A FIRE CALL CAME INTO THE HALL BY PHONE. THE LEVER’S FREQUENT/DAILY USE MAY EXPLAIN WHY OPERATORS CHOSE TO REMOVE THE BOX’S HINGED DOOR - DOCUMENTED HISTORICALLY IN GALT ARCHIVAL IMAGE P19760218007. FOR FURTHER INFORMATION ON BOX AND SYSTEM’S RECEIVER/REGISTER, PLEASE SEE PERMANENT FILE.
Catalogue Number
P19760096000
Acquisition Date
1976-03
Collection
Museum
Less detail
Date Range From
1950
Date Range To
1960
Material Type
Artifact
Materials
STEEL, RUBBER, ALUMINUM
Catalogue Number
P19950037020
Material Type
Artifact
Date Range From
1950
Date Range To
1960
Materials
STEEL, RUBBER, ALUMINUM
No. Pieces
2
Description
1. EXTINGUISHER: 48CM (L) X 8.5CM (D) STEEL FIRE EXTINGUISHER PAINTED RED. EXTINGUISHER IS CYLINDRICAL WITH ROUNDED ENDS. AT TOP END IS FLAT PLUG WITH ALUMINUM TRIGGER COVER. COVER HAS ROUNDED TOP WITH VERTICAL OPENING ALONG FRONT. RAISED ON EDGES OVER OPENING IS "PULL" AND "DOWN" WITH TWO ARROWS. THE AREAS ALONG THOSE EDGES ARE PAINTED RED. AT TOP OF COVER IS SQUARE LEVER WITH BALL END. STEEL COILED LOCK KEY HOLDS LEVER IN PLACE. WELDED TO SIDE OF TANK NEAR TOP IS CURVED STEEL HANDLE ON A HINGE. AT BOTTOM END IS ROUNDED VALVE OPENING WHICH HAS BLACK RUBBER HOSE SCREWED INTO IT. RUBBER HOSE HAS STEEL COLLAR AT ATTACHED END AND STEEL NOZZLE AT OTHER END. NOZZLE HAS SPRING LOADED TRIGGER AND THE WORD "ANSUL" IN LOW RELIEF ON BOTH SIDES. STAMPED INTO COLLAR AT BOTH ENDS OF HOSE IS "EASTMAN MANITOWOC. WIS 675". A SMALL ALUMINUM PLATE IS GLUED TO TRIGGER COVER WHICH READS "USE ONLY ON MODEL 4-C". ON LOWER BODY OF TANK IS STEEL PLATE COVER WHICH IS HELD TOGETHER AT BACK WITH BOLTED CLAMP. CLAMP IS USED TO HOLD HOSE IN PLACE. ON PLATE COVER IS "MODEL 4-C TESTED 600 LB." AND "FM" INSIDE A DIAMOND SHAPE. ACROSS TOP IN LARGE BLACK LETTERS IS "ANSUL DRY CHEMICAL FIRE EXTINGUISHER" WITH OPERATIONAL DIRECTIONS IN BLUE BENEATH IT. AT BACK OF PLATE IS DIRECTIONS FOR "AFTER USING" AND "MAINTENANCE" WITH "UNDERWRITERS' LABORATORIES. INC. INSPECTED DRY CHEMICAL HAND FIREEXTINGUISHER CLASSIFICATION B-2 C-2 NO." WITH "A56881" STAMPED INTO METAL. AT VERY BACK OF PLATE IS "ANSUL CHEMICAL COMPANY FIRE EXTINGUISHER DIVISION MARINETTE, WISCONSIN MADE IN U.S.A.". BENEATH THAT IS "U.S. PATENTS 1,793,420 1,839,658 2,484,943 DES. PAT 155,611 OTHER PAT PENDING" WITH "PATENTED, 1950, IN CANADA" UNDER THAT. PAINT ON EXTINGUISHER HAD A NUMBER OF SCRATCHES AND CHIPS IN IT. 2: WALL RACK: RED STEEL BRACKET WITH FASTENING CLASP THAT IS BOLTED TO WALL AND HOLDS EXTINGUISHER. BRACKET IS MADE UP OF TWO PIECES. A VERTICAL STRUT WITH BENT CUP END TO SUPPORT EXTINGUISHER BOTTOM. SECOND PIECE IS 2/3 WAY UP VERTICAL STRUT AND IS FASTENED HORIZONTALLY. IT IS A HALF CIRCLE WITH HINGED ENDS. HINGED TO THOSE ENDS ARE STEEL HOOK AND PRESSURE CLASP. CLASP HAS "ANSUL" STAMPED INTO IT. ALL BUT HINGED CLASP IS PAINTED RED. VERTICAL STRUT HAS THREE HOLES FOR BOLTS TO FASTEN IT TO WALL.
Subjects
REGULATIVE & PROTECTIVE T&E
Historical Association
SAFETY SERVICES
History
SEE P19950037001-GA. BELONGED TO WILLIAM H. SHORT, WHO WAS THE LAST FIRE CHIEF OF THE OLD NO. 1 FIRE HALL IN LETHBRIDGE. *UPDATE* IN 2016 COLLECTIONS ASSISTANT RUTHANN LABLANCE CONDUCTED A SURVEY OF CLOTHING, INCLUDING A BELT DONATED BY SHARON DEREK. THE FOLLOWING BIOGRAPHICAL INFORMATION WAS COMPILED USING ARTICLES FROM THE LETHBRIDGE HERALD. THE DONOR, SHARON DERRICK, IS THE NIECE OF AGNES SHORT. AGNES CHRISTINA SHORT WAS BORN ON APRIL 20, 1916 TO WILLIAM H. AND BERTHA SHORT (MAIDEN NAME UNKNOWN). SHE GRADUATED FROM LETHBRIDGE COLLEGIATE INSTITUTE AND THEN ATTDNED THE CALGARY GENERAL HOSPITAL FOR NURSING TRAINING, WHICH SHE GRADUATED FROM IN 1939. AGNES WAS THE SUPERVISOR AT THE GALT HOSPITAL FROM 1939-1945. SHE WAS IN CHARGE OF THE NURSING STAFF OF LETHBRIDGE SCHOOL DISTRICT #51 FROM 1947 UNTIL 1958. SHE WAS ALSO THE DIRECTOR OF NURSING AT THE LETHBRIDGE HEALTH UNIT FROM 1964 UNTIL HER RETIREMENT. SHE RETIRED IN 1980 AFTER 42 YEARS OF NURSING. AGNES PASSED AWAY AT THE AGE OF 78 ON OCTOBER 20, 1994. WILLIAM HENRY SHORT WAS AGNES’S FATHER. HE WAS BORN IN LONDON, ENGLAND IN 1889 AND MOVED TO CANADA IN 1909. HE INITIALLY WORKED FOR THE CITY WATERWORKS DEPARTMENT IN LETHBRIDGE FOR TWO YEARS, BEFORE SPENDING 51 YEARS IN SERVICE OF THE LETHBRIDGE FIRE DEPARTMENT. HE OVERSAW THE INTRODUCTION OF MOTORIZED FIRE ENGINES, SWITCHING FROM HORSE POWERED WAGONS, IN 1913. HE ALSO SAW THE DEPARTMENT GROW IN SIZE FROM ONLY 13 TO 49 MEN. HE PASSED AWAY AT THE AGE OF 84 ON NOVEMBER 18, 1974. WILLIAM’S WIFE BERTHA L. SHORT PASSED AWAY ON JULY 28, 1989. ACCORDING TO AN ARTICLE ABOUT AGNES’S LIFE, THE SHORT FAMILY LIVED IN NUMBER 1 FIRE HALL, WHERE WILLIAM WAS FIRE CHIEF. WILLIAM H. AND BERTHA ALSO HAD ANOTHER CHILD, WILLIAM D. SHORT. HE WAS BORN ON AUGUST 16, 1916 AND PASSED AWAY ON AUGUST 5, 1990. HE WAS MARRIED TO MYRTLE (NEE NELSON) SHORT AND THEIR CHILDREN INCLUDE THE DONOR, SHARON DERRICK. SEE PERMANENT FILE FOR COPIES OF THE ARTICLES FROM THE LETHBRIDGE HERALD. *UPDATE* IN 2018 COLLECTIONS ASSISTANT ELISE PUNDYK CONDUCTED A SURVEY OF BOXED TEXTILES AND ACCESSORIES INCLUDING A NUMBER OF ARTIFACTS DONATED BY SHARON DERRICK. ON 1 MARCH 2018, PUNDYK INTERVIEWED DERRICK REGARDING HER DONATION. THE INFORMATION BELOW HAS BEEN EXTRACTED FROM THAT INTERVIEW: A NUMBER OF ARTIFACTS DONATED WERE CONNECTED TO THE DONOR’S GRANDFATHER, WILLIAM H. SHORT AND HIS CAREER AS FIRE CHIEF IN THE NUMBER 1 FIRE HALL IN LETHBRIDGE. “YOU SEE, DURING THE YEARS THAT HE WAS THE FIRE CHIEF,” DERRICK BEGAN, “THEIR QUARTERS ACTUALLY WERE IN THE BACK OF THE FIRE HALL. SO STUFF KIND OF GOT ACCUMULATED THERE. THE WHOLE FAMILY [LIVED IN THE FIRE HALL]. WHEN I WAS LITTLE, I WAS THERE ALL THE TIME. MY FATHER [WILLIAM D. SHORT] WAS A CAPTAIN IN THE FIRE DEPARTMENT, BUT MY GRANDFATHER WAS THE FIRE CHIEF.” WHEN ASKED IF SHE HAD ANY MEMORY OF SEEING HER GRANDFATHER WEARING ANY OF THE ARTIFACTS, SUCH AS THE HELMET (P19950037014) OR THE FIRE PANTS (P19950037008), DERRICK RECALLED, “YES, BECAUSE LETHBRIDGE WAS SMALL AT THE TIME AND WHEN WE LIVED IN THE FIRE HALL AND THE BELLS WENT OFF, WE WOULD OFTEN WALK OVER TO HAVE A LOOK AT THE FIRE. I WOULD SEE MY GRANDFATHER OUT THERE, AND I’D SEE MY FATHER WHEN HE WAS ON SHIFT. THERE WERE SOME HUGE FIRES RIGHT DOWNTOWN. I CAN’T REMEMBER WHAT DATES – PROBABLY BACK IN THE LATE ‘40’S, EARLY ‘50’S. [IN ONE INSTANCE], MY DAD WAS ALSO ON THE BACK OF A FIRE TRUCK, SPEEDING TO A FIRE, AND ANOTHER TRUCK CAME ALONG AND HIT HIM IN THE BACK. HE SUFFERED VERY SEVERE INJURIES FROM THAT. AND I SAW THAT TOO. I WAS JUST ON MY WAY BACK TO SCHOOL.” “WHEN I WAS YOUNG, I WAS ALWAYS IN AND OUT [OF THE FIRE HALL],” DERRICK WENT ON, “THERE WAS A BELL TOWER THERE, WHERE THEY HUNG THE WET HOSES UP TO DRY. THERE WERE RICKETY OLD WOODEN STAIRS GOING ROUND AND ROUND ALL THE WAY UP TO THE TOP OF THE FIRE HALL TO WHERE THE BELL USED TO BE. I USED TO GO UP AND DOWN THOSE STAIRS, AND HOP AND PLAY. AND IN THE BASEMENT THERE WAS PRISON CELLS, BECAUSE IT USED [TO BE] THE POLICE STATION MANY, MANY YEARS BEFORE. IT WAS A COMBINATION OF FIRE AND POLICE. AND, THERE WAS A BIG FURNACE DOWN THERE. I USED TO GO DOWN AND WATCH THE FIREMEN PUSH COAL INTO THE FURNACE TO KEEP IT GOING. IT WAS AN INTERESTING PLACE TO BE AROUND.” “MY GRANDFATHER WAS ON THE INTERNATIONAL BOARD OF FIRE CHIEFS,” DERRICK CONTINUED, “HE WAS VICE-PRESIDENT IN NEW YORK. THEY HAD ASKED HIM TO COME UP AND TAKE THE PRESIDENCY, BUT AFTER MUCH CONSIDERATION, HE DECIDED HE DIDN’T WANT TO LEAVE THE FAMILY FOR THE TWO YEAR TERM IN NEW YORK, SO HE TURNED THAT ONE DOWN. THOUGH HE DID REMAIN ON THE BOARD FOR MANY YEARS.” AN ARTICLE IN THE LETHBRIDGE HERALD PUBLISHED ON SEPTEMBER 27, 2000 READS, “WILLIAM SHORT RETIRED AS LETHBRIDGE FIRE CHIEF IN 1962, ENDING A CAREER AS CHIEF WHICH BEGAN IN JANUARY 1945.” A HERALD ARTICLE FROM 1974 ADDITIONALLY STATES THAT SHORT “JOINED THE LETHBRIDGE FIRE DEPARTMENT IN 1911. HE WAS PROMOTED TO LIEUTENANT IN 1919 AND CAPTAIN IN 1922.” AN ADDITIONAL ARTICLE TITLED, “LETHBRIDGE WELL PROTECTED BY MODERN FIRE DEPARTMENT,” PUBLISHED IN 1967 IN THE LETHBRIDGE HERALD READS, “[IN 1910] THE FIRST FIREHALL THAT [WAS] LOCATED AT 4TH STREET AND 2ND AVENUE SOUTH WAS TORN DOWN. IT WAS A TWO-STOREY BUILDING. A THREE-STOREY FIREHALL WAS BUILT IN ITS PLACE ON THE SAME SITE. THAT EARLY BUILDING HOUSED THE FIRE DEPARTMENT EQUIPMENT, SERVED AS CITY HALL AND THE POLICE STATION…” WHEN ASKED ABOUT THE REASON FOR THE DONATION OF HER FAMILY’S ARTIFACTS DURING THE 2018 INTERVIEW, DERRICK EXPLAINED, “I WAS THE EXECUTOR FOR MY AUNT’S WILL AND WHEN SHE PASSED AWAY SHE [WAS LIVING IN] MY GRANDMOTHER AND GRANDFATHER’S HOME. ALL THIS STUFF HAD BEEN LEFT IN THE HOUSE, SO WHEN WE WERE CLEANING IT OUT FOLLOWING HER DEATH, WE CAME ACROSS ALL THESE THINGS. WHILE I KEPT SOME AS MEMENTOS, MY SISTER AND I [DECIDED TO DONATE OTHER ITEMS TO THE MUSEUM].” PLEASE PERMANENT FILE P19950037001, FOR MORE INFORMATION INCLUDING FULL INTERVIEW TRANSCRIPTION AND COPIES OF ARTICLES REGARDING THE FAMILY HISTORY.
Catalogue Number
P19950037020
Acquisition Date
1995-05
Collection
Museum
Less detail
Other Name
POLICE DEPT. MASK
Date Range From
1941
Date Range To
1951
Material Type
Artifact
Materials
PLASTIC, RUBBER, CANVAS, METAL
Catalogue Number
P19820035000
  2 images  
Material Type
Artifact
Other Name
POLICE DEPT. MASK
Date Range From
1941
Date Range To
1951
Materials
PLASTIC, RUBBER, CANVAS, METAL
No. Pieces
1
Length
46.0
Width
19.0
Description
CANADIAN MARK V GAS MASK COMPLETE WITH TIN CANISTER (FILTER SYSTEM).
Subjects
REGULATIVE & PROTECTIVE T&E
Historical Association
MILITARY
SAFETY SERVICES
History
WORLD WAR TWO ISSUE. POSSIBLY USED BY CITY POLICE SWAT TEAM.
Catalogue Number
P19820035000
Acquisition Date
1981-04
Collection
Museum
Images
Less detail

23 records – page 1 of 2.