Skip header and navigation

99 records – page 1 of 5.

Other Name
HANDGUN CONVERSION BARREL W/ CASE, “SIMUNITION”
Date Range From
1999
Date Range To
2009
Material Type
Artifact
Materials
STEEL, CARDBOARD, FOAM
Catalogue Number
P20100050004
  1 image  
Material Type
Artifact
Other Name
HANDGUN CONVERSION BARREL W/ CASE, “SIMUNITION”
Date Range From
1999
Date Range To
2009
Materials
STEEL, CARDBOARD, FOAM
No. Pieces
5
Height
3.25
Length
19
Width
9.25
Description
.A – RECTANGULAR CARDBOARD LID, PRINTED IN BLACK, WHITE AND RED. TEXT ALONG THE TOP READS “SIMUNITION – DIVISION OF SNC INDUSTRIAL TECHNOLOGIES INC. – CONVERSION KIT S&W 594X SERIE – FOR USE IN MILITARY/LAW ENFORCEMENT – TRAINING UNDER DIRECTION OF QUALIFIED INSTRUCTOR – CQT FX”. “UBJ 9746” IS WRITTEN ON TOP IN BLACK PEN. EDGES OF LID HAVE MINOR WEAR. OVERALL VERY GOOD CONDITION. 3.25 X 19 X 9.25 .B – RECTUANGULAR SHEET OF GREY FOAM, WITH SEMI-CIRCLE SHAPE CUT INTO ONE LONG EDGE. OVERALL VERY GOOD CONDITION. 1 X 18 X 8.5 .C – HOLLOW STEEL CYLINDER, TAPERED AT ONE END WITH A MOLDED TRIANGULAR SHAPE AT THE OPPOSITE END. STAMPED WITH TEXT READING “S&W 594X SNCSC 0392-06 – WARNING: FX AND CQT AMMO ONLY – NO STD AMMO”. MINOR OXIDATION ON STEEL; OVERALL VERY GOOD CONDITION. 2 X 11.5 X 2.25 .D – RECTANGULAR CARDBOARD BOX BASE WITH FOAM-LINED INSIDE. FOAM HAS RECESSED CAVITY RESEMBLING THE IRREGULAR SHAPE OF .C. OUTSIDE OF BOX IS WORN ALONG BOTTOM AND HAS BROWN STAIN ON ONE SIDE. OVERALL VERY GOOD CONDITION. 3.5 X 18.5 X 9
Subjects
ARMAMENT-ACCESSORY
Historical Association
SAFETY SERVICES
History
THIS SIMUNITION BARREL CONVERSION KIT WAS USED BY THE LETHBRIDGE REGIONAL POLICE TACTICAL UNIT DURING TRAINING PROCEDURES. SERGEANT GEORGE CARSCADDEN, WHO SERVED WITH THE LETHBRIDGE REGIONAL POLICE TACTICAL UNIT FROM 1999 TO 2012, DESCRIBED THE USE OF THIS BARREL CONVERTER AS SUCH: “THAT WOULD HAVE BEEN BOUGHT FOR THE TEAM EARLIER ON WHEN THEY HAD SMITH AND WESSON [PISTOLS]… [SIMUNITION IS] A PAINT PELLET ROUND, BUT SMALLER, AND FITS INTO YOUR PISTOL AND OPERATES SIMILAR LIKE A BULLET WOULD. IT MAKES A SOUND, AND EJECTS THE ROUND, AND FIRES A PAINT PELLET PROJECTILE [THAT] LEAVES A RED OR BLUE MARKING ON THE INDIVIDUAL TO INDICATE WHERE YOU WERE HIT. THAT WAY IT MAKES IT MORE REALISTIC WHEN DEALING WITH DIFFERENT TYPES OF SCENARIOS FOR THE OFFICERS AND FOR THE BAD GUYS [KNOWN AS QUARRY IN TRAINING PROCEDURES]. AS WE GOT MORE OF THESE [SIMUNITION CONVERTERS], WE WOULD THEN GIVE SIMUNITION TO THE BAD GUYS. AT THE BEGINNING, IT WAS US, THE TACTICAL TEAM OPERATORS, THAT WOULD HAVE THEM, AND THE QUARRIES WOULD NOT… IT WAS GOOD FOR [QUARRIES] TO HAVE IT, BECAUSE IT SHOWS THAT THE OFFICER MAY HAVE… TO GET OUT OF THE WAY AS WELL, SO IT IS REALLY GOOD ADVANCED TRAINING FOR TEACHING [OFFICERS] HIGHER LEVEL SKILL… A PERSON [WHO IS] RUNNING AROUND, OR MOVING, TO BE ABLE TO SHOOT THEM – THIS SHOWS THAT IT IS VERY DIFFICULT TO DO THAT. IT’S A GREAT ADVANCEMENT IN TRAINING.” ON JULY 28, 2015 COLLECTIONS TECHNICIAN KEVIN MACLEAN INTERVIEWED SGT. CARSCADDEN ABOUT HIS SERVICE WITH THE LRPS TACTICAL UNIT. CARSCADDEN SAID: “FIRST OF ALL, I JUST WENT AS A QUARRY… ALL DIFFERENT SPECIALTY UNITS THAT HAVE SOME KIND OF TACTICAL SCENARIO LIKE TO HAVE QUARRIES TO [HELP TRAIN THEM] TO DO THEIR JOB BETTER, SO I THOUGHT ‘I’LL GO WORK AS A QUARRY TO SHOW THEM I’M INTERESTED’. A QUARRY IS GENERALLY A BAD GUY – YOU PRETEND YOU’RE HIDING, OR MOVING OR YELLING OR RUNNING AWAY AND TRYING TO EVADE THEM, AND THEY ARE TRYING TO CAPTURE YOU… IT TOOK A COUPLE OF YEARS, BUT I WAS FORTUNATE ENOUGH… IN THE MOVEMENT OF THE TEAM THAT THERE WERE [POSITIONS OPEN]… THERE IS A PHYSICAL, AND INTERVIEW, SOME TESTS… I WENT THROUGH AND STUDIED, AND DID THE BEST THAT I COULD… MAKING SURE YOU ARE IN GOOD PHYSICAL SHAPE BECAUSE YOU ARE CARRYING AN EXTRA 50 POUNDS OF GEAR… THAT’S JUST THE GEAR THAT YOU ARE CARRYING ON YOURSELF, NOT A RAM OR DIFFERENT TYPE OF EQUIPMENT THAT YOU MIGHT BE MOVING INTO PLACE FOR DIFFERENT TACTICS… I WAS AROUND 35 [YEARS OLD]. I WAS AN OLDER GUY APPLYING FOR THIS POSITION, BUT I WAS IN GOOD SHAPE AND HAD SOME GOOD EXPERIENCES THAT MADE ME COMPETITIVE, SO I DON’T THINK YOUR AGE TAKES YOU OUT OF THE EQUATION IF YOU ARE REALLY DETERMINED.” CARSCADDEN CONTINUED: “I’VE HAD THE OPPORTUNITY TO BE IN A LOT OF DIFFERENT POSITIONS WITHIN [THE TACTICAL] UNIT… I STARTED OFF AS AN ASSAULTER… THE PERSON WHO CARRIES ALL THE GEAR, SO YOU’RE IN THE BACK… THE LAST PERSON THAT COMES IN. IT’S A GOOD POSITION TO START OFF WITH. IT MAKES IT SAFER FOR WHEN YOU’RE GOING INTO THESE HIGH-RISK ENVIRONMENTS… FROM THERE I WAS GIVEN THE OPPORTUNITY TO BE OBSERVER, THEN A SNIPER, THEN FROM THERE… A BREECHER. SO YOU ARE BREECHING DOORS AND WINDOWS. [THEN] I WENT TO THE FRONT OF THE TACTICAL LINE-UP, WHICH IS THE SCOUT… THEN THE LAST SIX YEARS THAT I WAS ON THE TACTICAL TEAM, I WAS THE PERSON IN CHARGE, THE TEAM LEADER… AND I WAS RUNNING OPERATIONS IN CONJUNCTION WITH OUR CANINE UNIT AND OUR EXPLOSIVES DISPOSAL UNIT… THE TRAINING IS REALLY GOOD. [THE TEAM] TRAINS EVERY TWO WEEKS, AND DO LOTS OF MOVEMENTS AND SHOOTING AND TACTICS. IT’S A PERISHABLE SKILL, THAT IF YOU DON’T REPEAT AND PRACTICE IT ALL THE TIME, IT DIMINISHES… PRACTICE IS IMPORTANT. IT ALLOWS YOU TO BE BETTER AT YOUR GAME... YOU NEED TO HAVE A MINDSET [OF] BEING NOT ONLY PHYSICALLY TOUGH, BUT MENTALLY TOUGH, WHEN YOU DEAL WITH THINGS IN A HIGH-RISK ENVIRONMENT… YOU’VE GOT TO HAVE A LITTLE BIT OF DRIVE TO GET YOU THROUGH THINGS.” CARSCADDEN CONCLUDED: “ONE OF THE THINGS I’M PROUD OF ON THE TACTICAL SIDE IS THAT I WAS THE OFFICER WHO WAS INSTRUMENTAL IN BRINGING LESS LETHAL CAPABILITY TO THE TEAM… [WE] MAKE THE DIFFERENCE IN SAVING SOMEBODY’S LIFE. WE HELP THEM THROUGH THAT TIME OF NEED… WE HAVE ESTABLISHED WHERE, IN THE PAST IF THAT PERSON COULD HAVE ACTUALLY BEEN SHOT AND INJURED, IF NOT FATALLY SHOT, THAT PERSON NOW CAN BE DEALT WITH A LESS LETHAL MEANS… WE ARE ABLE TO RESTRAIN, ARREST, WITH THESE LESS LETHAL CAPABILITIES. THAT MAKES THE DIFFERENCE FOR THEM… THE EXPERIENCES THAT I HAD IN PEEL [SHOWED ME LESS LETHAL CAPABILITIES] IN OPERATION AND HOW IT WORKED… THEY WERE ONE OF THE FIRST SERVICES IN CANADA TO HAVE THE RUBBER BULLET… WHEN YOU’RE LOOKING AT DIFFERENT TACTICS AND HOW YOU CAN DO IT BETTER, THAT WAS ONE OF THE THINGS THAT I RECOGNIZED, THAT [LETHBRIDGE] COULD BRING THIS ON. IT WOULD BE BETTER FOR OUR TEAM AND OUR COMMUNITY: AS OPPOSED TO SHOOTING SOMEBODY AND STOPPING THEM THAT WAY, WE COULD USE THE [RUBBER BULLET] OR BEANBAG ROUND AND THAT WOULD BE ABLE TO HELP STOP THESE PEOPLE [BUT] SAVE THEIR LIVES… IT REALLY OPENS PEOPLE’S EYES WHEN THEY SEE THAT THERE’S A LOT OF OTHER RESOURCES AVAILABLE TO PUT IN PLACE FOR DIFFERENT TACTICS. AND WHEN PEOPLE SEE THERE’S ANOTHER WAY OF DOING BUSINESS, IT’S HELPFUL FOR US TO PROGRESS AND PUSH FORWARD… THESE PIECES OF EQUIPMENT ARE HERE TO ALLOW US TO KEEP THINGS CONTROLLED AND TO MAKE US DO OUR JOB BETTER… I HAD THE OPPORTUNITY TO BE INVOLVED WITH A VERY SPECIALIZED UNIT AND I’M VERY PROUD OF IT.” SEE PERMANENT FILE FOR FULL INTERVIEW TRANSCRIPT.
Catalogue Number
P20100050004
Acquisition Date
2010-05
Collection
Museum
Images
Less detail
Date Range From
1970
Date Range To
1996
Material Type
Artifact
Materials
WOOD
Catalogue Number
P19960116170
Material Type
Artifact
Date Range From
1970
Date Range To
1996
Materials
WOOD
No. Pieces
1
Height
100
Length
213.8
Width
76.4
Description
ALTAR IS MEDIUM FINISH WOOD TABLE WITH TAPERED FRIEZE AT MID-SECTION. BOTTOM IS TWO WIDE LEGS WITH BRASS FRAME SCREWED TO LEGS. INSIDE BRASS FRAME IS CERAMIC TILE MOSAIC WITH BLUE AND GREY BACKGROUND. HAS WHITE ANGEL FIGURE WHOSE BODY AND WINGS FORM AN "M". TOP OF TABLE HAS 25.7CM SQUARE CUT IN IT FOR ALTAR STONE. ON FRONT CORNER IS BLUE PLASTIC LABEL WHICH READS "PROPERTY OF ST. MICHAEL'S HEALTH CENTRE 04947".
Subjects
CEREMONIAL ARTIFACT
Historical Association
RELIGION
FURNISHINGS
HEALTH SERVICES
History
THIS ALTAR WAS DONATED TO THE HOSPITAL BY MR. AND MRS. R.D. GRUENWALD IN 1965 TO REFURNISH THE NEW 2ND FLOOR CHAPEL. IT WAS DONATED IN MEMORY OF MR. GRUENWALD'S PARENTS. THE ALTAR WAS REMOVED FROM THE CHAPEL AT ST. MICHAEL'S HOSPITAL BEFORE THE HOSPITAL WAS DEMOLISHED IN 1996. FOR MORE HISTORY ON HOSPITAL SEE P19960116001-GA. ALTAR WAS CONSTRUCTED BY LOCAL CARPENTER JAKOB MARTENS. IN A STATEMENT MADE ON 16 FEBRUARY 2007, RICHARD (DICK) GRUENWALD, THE CHAPEL’S FINANCIAL SPONSOR, DOCUMENTED THE FOLLOWING: “IT MUST BE REMEMBERED THAT THIS WAS A CATHOLIC HOSPITAL, PRIVATELY OWNED BY THE SISTERS OF ST. MARTHA. THEREFORE, IT WAS EXPECTED THE CHAPEL WOULD BE INCORPORATED IN THE ORIGINAL BUILDING. IT (THE CHAPEL) WAS DECORATED AND UPDATED FOR GREATER USE BY THE STAFF AND PATIENTS … IN THE EARLY 1970’S. THIS (RENOVATION) WAS PAID FOR AND SPONSORED BY AN ESTATE LEFT TO BE USED FOR CHARITY. THE EXECUTOR OF THE ESTATE (DICK) CHOSE TO USE THE MONEY TO REFURBISH THE CHAPEL. (MY) MOTHER (LUCY) LEFT MONEY FOR CHARITY (DECEASED 1 MAY 1970) AND ST. MICHAEL’S HAD NO MONEY FOR THESE TYPES OF THINGS.” DICK GRUENWALD CLAIMED HIS MOTHER’S ESTATE PAID OUT $5,500 FOR THE CHAPEL. LUCY, HE SAID, “WAS A GREAT FRIEND OF THE SISTERS OF ST MARTHA AND ST. MICHAEL’S HOSPITAL”. DICK SERVED ON THE HOSPITAL’S BOARD IN THE EARLY 70S. *UPDATE* IN 2010, NICOLE HEMBROFF, COLLECTIONS ASSISTANT CONDUCTED A SURVEY OF PALLET RACKING. SHE MET WITH JAKOB MARTENS (WHO HAD PURPORTEDLY MADE THE ALTAR) TO DISCUSS THE ALTAR. HE SAID THAT THE ALTAR WAS NOT HIS WORK.
Catalogue Number
P19960116170
Acquisition Date
1996-01
Collection
Museum
Less detail
Other Name
SELF-CONTAINED BREATHING APPARATUS / AIR MASK AND HARNESS
Date Range From
1975
Date Range To
2000
Material Type
Artifact
Materials
PLASTIC, METAL, COTTON
Catalogue Number
P20150010017
  2 images  
Material Type
Artifact
Other Name
SELF-CONTAINED BREATHING APPARATUS / AIR MASK AND HARNESS
Date Range From
1975
Date Range To
2000
Materials
PLASTIC, METAL, COTTON
No. Pieces
5
Height
29.2
Length
68.8
Width
50.7
Description
SELF-CONTAINED BREATHING APPARATUS, INCLUDES CASE, HARNESS ASSEMBLY, MASK WITH STRAP, AND PAPER PASS CERTIFICATE. .A: CASE. BLACK MOULDED, TEXTURED PLASTIC CASE. ROUGHLY RECTANGULAR SHAPED. HINGED AT THE BACK, CASE HAS THREE HANDLES ON THE FRONT: ONE IS IN THE CENTRE OF THE CASE, WITH THE OTHER TWO ARE ON THE CORNERS OF THE BOX. THERE ARE TWO PLASTIC LATCHES BETWEEN THE THREE HANDLES. BLACK AND SILVER COLOURED STICKER ON THE TOP OF THE BOX READS: "MSA AIRMASK". A SECOND BLACK AND SILVER STICKER, ABOVE ONE OF THE LATCHES, READS: "ULTRALITE PRESSURE DEMAND" AND ALSO HAS "PASS IN BOX" HANDWRITTEN IN BLACKMARKER. A THIRD BLACK AND SILVER STICKER THAT READS "MSA AIRMASK" IS ON THE BOTTOM OF THE BOX. YELLOW PIECE OF DUCT TAPE ON RIGHT SIDE, HANDWRITTEN IN BLACK INK: "ULTRALITE BMR". INSIDE THE BOX IS SUBDIVIDED INTO COMPARTMENTS. AFFIXED TO THE INSIDE TOP OF THE LID IS A PAGE OF INSTRUCTIONS TITLED "MSA AIR MASK, PRESSURE DEMAND TYPE". A SMALL PIECE OF PAPER AFIXED TO THE INSIDE OF THE LID IS TITLED "PACKING ARRANGEMENT" AND HAS AN ILLUSTRATION OF HOW THE UNIT SHOULD BE PACKED AWAY. DIMENSIONS PROVIDED ABOVE CORRESPOND TO THIS CASE. OVERALL IN FAIR TO GOOD CONDITION. THE TWO "MSA AIRMASK" STICKERS HAVE PARTIALLY PEELED AWAY, WITH THE TOP STICKER MISSING THE BOTTOM OF "ASK" IN "MASK" AND WITH THE BOTTOM STICKER MISSING PARTS OF THE "MSA": THE "M" AND "A" ARE PARTIALLY MISSING, WHILE THE "S" IS ENTIRELY GONE; "MASK" OF THIS STICKER IS ALSO VERY DAMAGED. LATCH BELOW THE "ULTRALITE" STICKER IS IN GOOD CONDITION, WHILE THE OTHER IS PARTIALLY BROKEN. SEVERAL SCUFFS AND SCRATCHES IN THE PLASTIC, ESPECIALLY ALONG THE BOTTOM. .B: HARNESS ASSEMBLY. BLACK PLASTIC, METAL, AND FABRIC WITH SILVER COLOURED METAL. OUTER PORTION OF HARNESS DESIGNED TO HOLD BOTTLE OF COMPRESSED AIR. BLACK METAL BRACKET RUNS VERTICALLY UP AND DOWN THE HARNESS AND HAS A SILVER COLOURED CIRCULAR METAL BAND TO HOLD TANK IN PLACE. THE SILVER BAND IS 7.7CM WIDE AND HAS TWO BLACK STICKERS WITH “MSA” IN YELLOW STUCK ON. BOTTOM OF BLACK METAL BRACKET HAS A TRIANGULAR SHAPED PIECE, WITH A ROUND RUBBER TIP, TO HOLD THE BOTTOM OF THE AIR TANK IN PLACE. BELOW SILVER BAND IS A STICKER, WITH A DISCOLOURED WHITE BACKGROUND AND BLACK LETTERS GIVING INSTRUCTIONS FOR USE, ENTITLED: “CUSTOM 4500/ULTRALITE BELT MOUNTED SCBA. OPEN CIRCUIT, PRESSURE-DEMAND ENTRY AND ESCAPE SELF-CONTAINED BREATHING APPARATUS OR COMBINATION SELF-CONTAINED BREATHING APPARATUS AND TYPE C SUPPLIED AIR RESPIRATOR.” SILVER BAND FOR TANK HAS A HANDLE THAT EXPANDS AND CONTRACTS THE BAND, TO ALLOW FOR REMOVAL AND INSTALLATION OF AIR TANK. AT THE TOP OF THE BLACK METAL BRACKET, THERE IS A CIRCULAR SECTION WHICH ALLOWS FOR THE ATTACHMENT OF TWO BLACK PADDED FABRIC SHOULDER STRAPS. THESE STRAPS ARE BOLTED ON WITH BLACK AND SILVER COLOURED BOLTS. BLACK METAL BRACKET ATTACHES AT WAIST AREA TO BLACK MOULDED PIECE OF PLASTIC. BLACK MOULDED PLASTIC FITS AROUND THE HIP AREA OF THE WEARER. SHOULDER STRAPS COME DOWN FROM TOP OF METAL BRACKET AND ATTACH TO THIS BLACK PLASTIC JUST ABOVE THE HIP. SHOULDER STRAPS ARE PADDED AND HAVE A SECOND SMALLER STRAP, WHICH WOULD CROSS THE WEARER’S CHEST WITH A BLACK SIDE RELEASE PLASTIC BUCKLE, WITH THE FEMALE COMPONENT ON THE RIGHT STRAP. ON EACH STRAP BELOW THE PLASTIC BUCKLE IS A SILVER COLOURED “D” RING. ABOVE THE BUCKLE ON EACH STRAP IS A SILVER COLOURED SILK SCREEN SECTION WITH “MSA”. AT THE BOTTOM WAIST PORTION OF THE MOULDED PLASTIC IS ANOTHER BLACK FABRIC STRAP, TO GO AROUND THE WEARER’S WAIST. THE BELT ATTACHES WITH A SILVER COLOURED METAL LATCH PLATE ON THE RIGHT SIDE, WHICH FITS INTO A BLACK PLASTIC BUCKLE, WITH A BLACK PLASTIC BUTTON TO RELASE, ON THE WEARER’S LEFT SIDE. ATTACHED TO THE LEFT SIDE OF THE BELT IS A PRESSURE REGULATOR AND HIGH PRESSURE SUPPLY HOSE. THE PRESSURE REGULATOR CONSISTS OF BLACK METAL AND PLASTIC, AND GOLD AND RED COLOURED METAL. A CIRCULAR GOLD COLOURED METAL PIECE HAS REMNANTS OF TWO STICKERS ON ITS FACE: “MSA AIR MASK – MFD BY MINE SAFETY APPLIANCES COMPANY – PITTSBURGH, PENNSYLVANIA – PRESSURE DEMAND.” BELOW IT IS A HOSE COUPLING. THIS COUPLING HAS A BLACK RUBBER CAP, EMBOSSED WITH “FHR”. BESIDE THIS IS AN AIR PRESSURE GAUGE: BLACK METAL TEXTURED EDGE, GLASS FACE, AND RUBBER ENCASING. THE FACE OF THE GAUGE IS OFF-WHITE WITH A DIAL INCREASING IN INCREMENTS OF 5 (5, 10, 15, 20, 25, 30), WITH A RED SECTION FROM 0-5, A YELLOW SECTION BETWEEN 20 AND 25, AND A GREY SECTION AT 30. BELOW THE DIAL IS “PSI X 100 – USE NO OIL – MSA 18” BESIDE THE GAUGE IS A RED COLOURED METAL KNOB, WITH “ß OPEN – BY PASS” EMBOSSED ON FRONT FACE. BESIDE THIS RED KNOB IS A GOLD COLOURED KNOB WITH A SILVER COLOURED TAB “^PUSH^”. ON THE FACE OF THE GOLD KNOB, EMBOSSED, IS “MAIN LINE ^” WITH “MSA” IN CENTRE. OPPOSITIE THE PRESSURE GAUGE IS A HIGH PRESSURE SUPPLY HOSE. THE HOSE IS BLACK PLASTIC AND FABRIC. ON THE END OF THIS HOSE IS A SILVER COLOURED BELL, USED AS A LOW AIR ALARM. AT THE VERY END OF THE HOSE IS A BLACK TEXTURED METAL COUPLING. .C: MASK WITH HOSE. BLACK PLASTIC RESPIRATOR MASK WITH CLEAR PLASTIC VISOR. FITTED NOSE PIECE WITH TWO SMALL CIRCLES ON EITHER SIDE OF BRIDGE OF NOSE PIECE. EACH CIRCLE HAS BLACK PLASTIC SPOKES AND A TRANSPARENT FLAP, WHICH IS ON THE INSIDE OF THE NOSE PIECE. HANDWRITTEN IN GOLD COLOURED INK, ON THE INSIDE OF NOSE PIECE, “G29C” OR “929C”. FRONT OF NOSE PIECE, VISIBLE THROUGH THE VISOR, HAS “MEDIUM” EMBOSSED ONTO MASK. FIVE BLACK PLASTIC STRAPS WITH SILVER COLOURED BUCKLES ALLOW MASK TO BE SECURELY TIGHTENED ONTO THE HEAD. STRAPS MEET AT A ROUGHLY STAR-SHAPED PIECE THAT SITS AT THE BACK OF THE HEAD. THIS STAR-SHAPED PIECE HAS THE FOLLOWING EMBOSSED ONTO THE PLASTIC: “M2 C5 – MSA – PULL FRONT STRAP LAST – U”. ABOVE THE “M2 C5” IS AN EMBOSSED MULTI-SPOKED CIRCLE. EMBOSSED IN THE CENTRE OF THE CIRCLE: “93 – 94 – 95” EACH OF THE FIVE STRAPS ARE LABELLED; TWO AT THE BASE OF MASK, EACH LABELLED “NECK”, NEXT TWO UP ARE “SIDE”, AND THE FIFTH STRAP AT THE TOP OF THE MASK IS “FRONT”. ON FRONT OF MASK, AT THE MOUTH AREA, IS A LONG ACCORDION-STYLE HOSE. IT IS ATTACHED TO THE MASK WITH A SILVER COLOURED METAL CLAMP. ON THE NUT OF THIS CLAMP IS WRITTEN “ALL STAINLESS BREEZE”. BELOW IS A BLACK METAL BAND, WHICH IS STAMPED IN YELLOW WITH “-18 TINNERMAN”. BELOW THAT THERE IS A SILVER COLOURED METAL RING, WHICH HAS A BLACK FABRIC STRAP ATTACHED (SEE BELOW FOR DESCRIPTION OF THIS ITEM, P20150010017D). THE BOTTOM OF THE HOSE HAS A BLACK METAL BAND AND THEN A SILVER COLOURED, TEXTURED METAL PIECE TO CONNECT TO THE AIR SUPPLY CANISTER. BELOW THE HOSE CONNECTION, AT THE CHIN AREA OF THE MASK, IS A MEDIUM-LIGHT GREY CIRCLE, EMBOSSED WITH “MSA – U.S. PAT. 4,007,758”. TO THE RIGHT OF THE HOSE ATTACHEMENT HANDWRITTEN IN GREEN INK IS “#4”. ON THE RIGHT SIDE OF THE MASK, BETWEEN THE “NECK” AND “SIDE” STRAPS IS A FAINT STAMP IN YELLOW “7-212-“. EMBOSSED IN CENTRE OF MASK, ABOVE FACE VISOR, IS “MSA” IN A CIRCLE. INSIDE OF THE HOSE ATTACHMENT, BELOW THE MOULDED NOSE AREA, IS A BLACK DISK WITH HOLES IN IT. VISIBLE THROUGH THESE HOLES IS A PIECE OF GOLD-COLOURED METAL. DIMENSIONS OF MASK: HOSE IS 83.5CM LONG; VISOR IS 18CM WIDE. .D: STRAP ON MASK. BLACK FABRIC STRAP, WITH TWO BLACK SNAPS. SNAPS ONTO SILVER-COLOURED METAL RING AROUND THE HOSE. STRAP IS 92.5CM LONG AND 1.9CM WIDE. OVERALL CONDITION OF B, C, D: WELL WORN. ALL STICKERS SHOW SIGNS OF WEAR: DISCOLOURATION AND FINISH OF STICKERS SCRATCHED. STRUCTRUALLY IN GOOD CONDITION. MANY SCUFFS AND SCRATCHES ALL OVER. ALL FABRIC IN GOOD CONDITION. RUBBER RETAINS FLEXIBILITY AND PLASTICS ARE IN GOOD SHAPE WITH NO CRACKS. .E: PAPER PASS CERTIFICATE. GOLDENROD COLOURED PAPER. READS: "MSA - ULTRALITE DP - B.M.R. C/W FACEMASK. THIS UNIT TESTED AND HAD ACCEPTABLE PERFORMANCE ON SEPTEMBER 02, 2008. KEN HOBIAK" (WITH KEN'S SIGNATURE ABOVE HIS TYPED NAME). REVERSE OF PAPER: "THIS UNI PERFORM KEN H" (APPEARS TO HAVE MISPRINTED ON THIS SIDE). PAPER IS STANDARD LETTER SIZE. CONDITION IS GOOD: PAPER HAS BEEN CRUMBLED AND HAS A FEW SMALL TEARS AROUND THE OUTSIDE.
Subjects
MINING & MINERAL HARVESTING T&E
Historical Association
SAFETY SERVICES
History
THIS SELF-CONTAINED BREATHING APPARATUS (SCBA) WAS USED BY THE LETHBRIDGE FIRE DEPARTMENT. IN A WRITTEN STATEMENT PROVIDED AT THE TIME OF DONATION, JESSE KURTZ, DEPUTY CHIEF – SUPPORT SERVICES (RETIRED), EXPLAINED THAT THE MASK WAS “USED BY ALL FIREFIGHTERS TO CONNECT TO THE BELT MOUNTED REGULATOR SCBA TO ENTER HAZARDOUS ATMOSPHERES” AND THAT THE HARNESS WAS “USED BY ALL FIREFIGHTERS TO BREATH IN HAZARDOUS (SMOKY) ATMOSPHERES.” HE CONTINUED SAYING THAT THERE ARE “MORE MODERN MASK MOUNTED REGULATOR SCBAS [THAT HAVE BEEN] DEVELOPED AND PURCHASED.” IN THE SUMMER OF 2015, COLLECTIONS TECHNICIAN KEVIN MACLEAN, CONDUCTED A SERIES OF INTERVIEWS WITH CURRENT AND FORMER MEMBERS OF THE FIRE DEPARTMENT, INCLUDING: CLIFF “CHARLIE” BROWN (HIRED IN 1966, RETIRED 2004), TREVOR LAZENBY (HIRED IN 1994), AND LAWRENCE DZUREN (HIRED 1959, RETIRED 1992). BROWN EXPLAINED THAT THIS SCBA “WAS AN ON-DEMAND REGULATOR. THAT WAS NICE TO HAVE DEMAND, BECAUSE NO MATTER WHO IT WAS, THE HARDER YOU BREATHED, THE MORE AIR IT WOULD GIVE YOU. THE HARNESS IS PROBABLY MORE COMFORTABLE [THAN PREVIOUS ONES]. SOME GUYS WOULD USE THREE TANKS, SO THE HARNESS WAS A LITTLE BIT MORE COMFORTABLE FOR THEM. THEY’D COME OUT, THEY’D TURN AROUND, THEY WOULDN’T EVEN TAKE OFF THEIR GEAR. THEY’D TURN AROUND, THERE’D BE GUYS WHO WOULD TAKE THE TANK OFF, PUT ANOTHER TANK ON, HOOK IT ALL UP, A GOOD PAT ON THE BACK, AND BACK IN THEY’D GO WITH ANOTHER TANK. THEY’D DO THAT THREE TIMES BEFORE … THEY WERE JUST TOO TIRED … WE DIDN’T HAVE AN AIR COMPRESSOR TO FILL OUR OWN TANKS. I CAN’T REMEMBER WHERE THEY WENT. THEY MUST HAVE WENT TO THE SWIMMING POOL.” LAZENBY CONTINUED SAYING THAT THIS SCBA WAS “A VERY, VERY OLDER GENERATION SCBA BOTTLE. THESE WERE KIND OF RUDIMENTARY DESIGN. THE BOTTLE WAS STEEL ON THESE, WHICH MADE THEM VERY, VERY HEAVY. MODERN BOTTLES ARE FIBERGLASS WRAPPED WHICH MAKES THEM MUCH, MUCH LIGHTER; ADDED TO WHICH, IT HAD A BARELY PADDED HARNESS SYSTEM ON IT AND BASICALLY A GLORIFIED SEATBELT STRAP FOR A WAIST STRAP. SO WITH THESE KINDS OF THINGS, YOU DON’T WANT TO KEEP A TON OF WEIGHT ON YOUR SHOULDERS BECAUSE IT FATIGUES YOUR UPPER BODY VERY, VERY QUICKLY WHEN YOU’RE WORKING. BUT WITH THIS TYPE OF HARNESS ON THEM, IF YOU CINCHED THE WAIST UP REALLY TIGHT AND TOOK THE PRESSURE OFF YOUR SHOULDERS, THIS JUST SEEMED TO DIG INTO YOUR WAIST LIKE CRAZY, LIKE IT WAS VERY UNCOMFORTABLE TO WEAR … THAT BEING SAID, WHEN GUYS WENT TO THIS FROM LIKE THE CANISTERS THAT THEY USED TO WEAR, THIS MUST HAVE BEEN LIKE A NEW LEASE ON LIFE FOR THESE GUYS … I WORE THESE IN TRAINING – I DON’T THINK I EVER WORE ONE OF THESE BOTTLES ON AN ACTUAL FIRE CALL … WE HAD THE FIBERGLASS ONES IN FRONTLINE SERVICE WHEN I STARTED SO THIS WOULD BE PRE-1994, IF I’M NOT MISTAKEN. I DON’T THINK WE HAD THESE ON THE TRUCKS IN ’94. THEY WERE AROUND AND THEY WERE BACKUPS, BUT THEY WEREN’T FRONTLINE.” HE ELABORATED FURTHER, SAYING: “WE DIDN’T HAVE INDIVIDUAL MASKS; WE SHARED MASKS ON THE FIRE DEPARTMENT BACK THEN … THERE WASN’T ENOUGH MONEY FOR THEM TO BUY US OUR OWN INDIVIDUAL FACE PIECE … SO WHAT WE USED TO DO IS AFTER EVERY INCIDENT OR AFTER EVERY TIME YOU WORE ONE OF THESE THINGS, IT WOULD COME OFF THE TRUCK, WE WOULD HAVE A BOTTLE OF MSA MASK CLEANER THAT WE WOULD PUT INTO A TUB, WE WOULD MAKE A SOAPY WATER SOLUTION, WE WOULD WASH THE MASK, RINSE THE MASK, LET IT HANG TO DRY, AND THE NEXT PERSON WOULD USE IT AS THE NEXT SHIFT CAME ON.” HE ADDED THAT NOW EVERYONE IN THE DEPARTMENT HAS THEIR OWN MASK: “WE’VE HAD OUR OWN MASKS FOR 10-12 YEARS. WE STILL SHARE THE SCBAS AS FAR AS THE BOTTLE AND THE HARNESS GOES … THEY’RE IN THE RACKS ON THE TRUCK, IN THE BACKS OF THE SEATS AND DOWN IN BY THE HOSE OR THE PUMP COMPARTMENTS.” IN DISCUSSING WHY THIS MODEL IS NO LONGER USED, LAZENBY STATED: “THIS HOSE EASILY CRIMPED SO YOUR AIR SUPPLY COULD BE CUT OFF. THE AIR SUPPLY THAT NOW GOES FROM THE TANK TO YOUR MASK IS A MUCH MORE RIGID HOSE THAT, REALLY, YOU’D HAVE TO BASICALLY BEND IT IN HALF TO STOP THE FLOW OF AIR.” DZUREN ADDED FURTHER: “PRIOR TO [THIS] OUR BREATHING APPARATUS WAS WHAT THEY CALLED A CANISTER TYPE OF BREATHING APPARATUS … IT WAS JUST A CANISTER THAT YOU HAD IN FRONT OF YOU HERE AND IT WAS LAYERS OF … GEL, AND SAND, AND SILICA … THERE WAS A SHELF-LIFE WITH THOSE THINGS. IF YOU USED THEM, YOU PRETTY WELL HAD TO DISCARD THEM AFTER YOU USED THEM.” WHEN ASKED WHEN THIS TYPE OF SCBA CAME INTO SERVICE, DZUREN STATED: “I WOULD PROBABLY SAY MAYBE IN THE ‘70S SOMETIME? … I RECALL GUYS GOING IN WHEN WE JUST HAD THOSE CANISTERS. THEY WOULD GO WITHOUT ANYTHING. AND THEY WOULD COME OUT AFTER A WHILE AND THEY WOULD BE BARFING THEIR GUYS OUT … IT SEEMED TO BE, EVEN PRIOR TO MY TIME, WHEN THE STORIES I HEARD FROM GUYS THERE LONGER THAN MYSELF, THAT SEEMED TO BE THE MACHO THING. GET IN THERE AND THEY’D GET IN THERE WITHOUT A MASK. BUT EVENTUALLY, YOU KNOW, BETTER THINKING CAME ALONG AND SAID ‘DON’T BE SILLY, GET SOME STUFF ON THERE.’ BUT ONCE THEY GOT IT, AND THEY STARTED TO USE IT, YOU DID FEEL A LOT BETTER GOING IN, ‘CAUSE PRIOR TO USE GETTING THAT WE HEARD THE HORROR STORIES OF GUYS WHO DID SUCCUMB TO THE ELEMENTS BECAUSE OF ALL THOSE CANISTER TYPES, BUT ONCE THEY GOT [THIS SCBA] IT WAS BETTER.” SEE PERMANENT FILE FOR FULL INTERVIEW TRANSCRIPTS AND ADDITIONAL INFORMATION ABOUT THE LETHBRIDGE FIRE DEPARTMENT.
Catalogue Number
P20150010017
Acquisition Date
2015-02
Collection
Museum
Images
Less detail
Other Name
SELF-CONTAINED BREATHING APPARATUS TRAINING BACKPACK
Date Range From
1995
Date Range To
2005
Material Type
Artifact
Materials
CANVAS, NYLON, METAL
Catalogue Number
P20150010018
  2 images  
Material Type
Artifact
Other Name
SELF-CONTAINED BREATHING APPARATUS TRAINING BACKPACK
Date Range From
1995
Date Range To
2005
Materials
CANVAS, NYLON, METAL
No. Pieces
1
Height
58.2
Length
35.0
Width
133.2
Description
SELF-CONTAINED BREATHING APPARATUS TRAINING BACKPACK. STEEL AIR TANK, PAINTED MEDIUM GREY, WITH DARK YELLOW CANVAS SHOULDER STRAPS, AND GREEN NYLON WAIST STRAP. MEDIUM GREY STEEL AIR BOTTLE, HELD TO THE HARNESS ASSEMBLY BY A SILVER COLOURED METAL BRACKET. THIS BRACKET HAS A LARGE YELLOW WITH GREEN WRITING STICKER: "MSA AIRMASK MODEL 401". HARNESS ASSEMBLY IS ALSO MEDIUM GREY METAL AND IS ROUGHLY RECTANGULAR IN SHAPE. AT THE TOP OF THE RECTANGLE IS A CIRCLE, WHICH IS WHERE THE YELLOW SHOULDER STRAPS ARE AFFIXED WITH BLACK AND SILVER COLOURED RIVETS TO THE HARNESS ASSEMBLY. YELLOW STRAPS ARE PADDED AND EACH STRAP HAS A SQUARE OF THE LOOP SIDE OF VELCRO AT THE BOTTOMS. THE YELLOW STRAPS ATTACH TO THE RIGID WAIST SUPPORT WITH BLACK NYLON STRAPS. THE ENDS OF THE BLACK STRAPS HAVE A RECTANGULAR PIECE OF THE HOOK SIDE OF VELCRO AND THE VERY ENDS ARE FINISHED WITH A SEMI-CIRCULAR PIECE OF SILVER METAL. THE RIGID WAIST SUPPORT IS PADDED WITH BLACK FABRIC. THE GREEN WAIST STRAPS ARE AFFIXED TO THE RIGID METAL SUPPORT WITH TWO BLACK RIVETS EACH. THE WAIST STRAP CLOSES WITH A SEAT BELT STYLE BUCKLE. THE BUCKLE IS ON THE WEARER'S RIGHT SIDE AND IS STAMPED ON THE REVERSE WITH: "UIO BUCKLE WEAR BELT SNUG. REPLACE IF DAMAGED OR FRAYED." BOTTOM OF AIR BOTTLE IS STAMPED WITH "DOT-3A A2015. D136587 MSA". THE STAMP CONTINUES UNDER THE HARNESS, BUT IS NOT READABLE. PRESSURE GAUGE AND REGULATOR ALSO ON THIS END OF THE BOTTLE. OVERALL IN GOOD CONDITION. BOTTLE APPEARS TO HAVE BEEN YELLOW AND THEN PAINTED GREY. GREY PAINT HAS SCRATCHED OFF ALL OVER THE AIR BOTTLE, REVEALING THE YELLOW SURFACE BELOW. ALL FABRIC STRAPS ARE IN GOOD CONDITION, WITH NO VISIBLE TEARS OR RIPS. YELLOW STRAPS ARE DISCOLOURED.
Subjects
MINING & MINERAL HARVESTING T&E
Historical Association
SAFETY SERVICES
History
THIS SELF-CONTAINED BREATHING APPARATUS TRAINING BACKPACK WAS USED BY THE LETHBRIDGE FIRE DEPARTMENT. IN A WRITTEN STATEMENT PROVIDED AT THE TIME OF DONATION, JESSE KURTZ, DEPUTY CHIEF – SUPPORT SERVICES (RETIRED), EXPLAINED THAT THE “THIS IS JUST A HARNESS FOR TRAINING PURPOSES WITH A STEEL AIR CYLINDER. IT SIMULATES THE ACTUAL WEIGHT AND FEEL OF A REAL SETUP. [IT WAS] ‘HOME BUILT’ FOR TRAINING PURPOSES.” IN THE SUMMER OF 2015, COLLECTIONS TECHNICIAN KEVIN MACLEAN CONDUCTED A SERIES OF INTERVIEWS WITH CURRENT AND FORMER MEMBERS OF THE FIRE DEPARTMENT, INCLUDING TREVOR LAZENBY (HIRED IN 1994). HE RECALLED: “I DON’T THINK I EVER WORN ONE OF THESE AT AN ACTUAL FIRE. I THINK I’VE ONLY EVER WORN THE NEXT GENERATION FIBERGLASS-WRAP … WE HAD THE FIBERGLASS ONES IN FRONTLINE SERVICE WHEN I STARTED, SO THIS WOULD BE PRE-1994, IF I’M NOT MISTAKEN. I DON’T THINK WE HAD THESE ON THE TRUCKS IN ’94. THEY WERE AROUND AND THEY WERE BACKUPS, BUT THEY WEREN’T FRONTLINE … WE KEPT ONE OR TWO AT THE NORTHSIDE FIRE HALL AND AT THE WESTSIDE FIRE HALL BECAUSE WHEN GUYS AT LUNCHTIME HAVE A WORKOUT, OR AFTER WORK, THEY’LL HAVE A WORKOUT AND THEY’LL ACTUALLY PUT THE OLD HEAVY STEEL BOTTLE ON AND THEY’LL CLIMB THE STAIRS – SO IT’S USED TO WORK OUT AND NOTHING ELSE. VERY, VERY UNCOMFORTABLE. VERY HEAVY DESIGN.” SEE PERMANENT FILE FOR FULL INTERVIEW TRANSCRIPTS AND ADDITIONAL INFORMATION ABOUT THE LETHBRIDGE FIRE DEPARTMENT.
Catalogue Number
P20150010018
Acquisition Date
2015-02
Collection
Museum
Images
Less detail
Other Name
CANADIAN MILITARY
Date Range From
1895
Date Range To
1918
Material Type
Artifact
Materials
LEATHER, BRASS
Catalogue Number
P19683053000
  2 images  
Material Type
Artifact
Other Name
CANADIAN MILITARY
Date Range From
1895
Date Range To
1918
Materials
LEATHER, BRASS
No. Pieces
1
Length
122
Width
8.6
Description
DESIGNED TO HOLD 50, .303 CARTRIDGES. STAMPED "H. LAMONTAGNE, CON MONTREAL, CANADA" LEATHER WITH BRASS RIVET STUDS. BACKSIDE HAS STAMPED IN RED "4297" AND WRITTEN IN BLACK IN "440-S17".
Subjects
ARMAMENT-ACCESSORY
Historical Association
MILITARY
History
DONOR CLAIMS BANDOLIER OWNED BY GENERAL J.B. MARION OF MONTANA NATIONAL GUARD THESE BANDOLIERS WERE INTRODUCED IN 1895, WHEN THE CANADIAN GOV'T ADOPTED THE LEE-METFORD RIFLE. THEY WERE DESIGNED TO BE USED EXCLUSIVELY BY MOUNTED TROOPS. EA. BANDOLIER CARRIED BRITISH .303 CALIBRE AMMUNITION. THEY WERE CARRIED BY CANADIAN CALVARY UNITS IN THE SOUTH AFRICAN WAR & WORLD WAR 1. SOME UNITS WERE STILL CARRYING THEM IN THE LATE 1930'S. SEE ALSO P19683050000 -P19683052000-GA & P19683054000-GA FOR RELATED ARTIFACTS FROM DONOR.
Catalogue Number
P19683053000
Acquisition Date
1968-02
Collection
Museum
Images
Less detail
Date Range From
1910
Date Range To
1920
Material Type
Artifact
Materials
BRASS, STEEL
Catalogue Number
P19739489000
Material Type
Artifact
Date Range From
1910
Date Range To
1920
Materials
BRASS, STEEL
No. Pieces
3
Height
16.5
Length
180.3
Width
133.3
Description
PAINTED WHITE EXCEPT TOP PANEL FOOTBOARD & HEADBOARD. SPRINGS GILT SPRAY PAINT.
Subjects
FURNITURE
Historical Association
FURNISHINGS
Catalogue Number
P19739489000
Acquisition Date
1973-11
Collection
Museum
Less detail
Date Range From
1900
Date Range To
1910
Material Type
Artifact
Materials
WALNUT, IRON, STEEL
Catalogue Number
P19770319000
Material Type
Artifact
Date Range From
1900
Date Range To
1910
Materials
WALNUT, IRON, STEEL
No. Pieces
11
Height
167.6
Length
193.0
Width
141.0
Description
HEADBOARD - CARVED DESIGN WITH CUT-OUT IN CENTRE AT TOP OF BOARD. 167.6 CM 141 CM X 5.1 CM. FOOTBOARD -CURVED CARVED DESIGN WITH CUT-OUT IN CENTRE. 73.6 CM HT. X 140.CM WTH. X 7.6 CM THICK. SLATS (6) - MADE OF UNFINISHED WOOD. 135.9 CM LTH. X 7.6 CM WTH. X 1.9 THICK. SIDE RAILS (2) - 2.7 CM THICK X 17.8 CM WTH. X 182.8 CM LTH. "TOPS" ON EACH SIDE RAIL HAVE SPLIT OFF AND HAVE BEEN REFINISHED. SPRINGS - MADE OF IRON & STEEL. 180.3 CM LTH. X 116.8 CM WTH. X 1.3 CM THICK. "PARKHILL" (DECAL) IS ALONG ONE SIDE OF SPRINGS. "NO. 315" AND "1-0" IS STAMPED ALONG SAME SIDE IN YELLOW.
Subjects
FURNITURE
Historical Association
FURNISHINGS
History
HIGH BACK BED ORIGINALLY OWNED BY JOHN MCDOWELL DAVIDSON, FATHER OF JOHN MCDOWELL WHO LIVES IN LETHBRIDGE. *UPDATE* IN 2010, NICOLE HEMBROFF, COLLECTIONS ASSISTANT, CONDUCTED A SURVEY OF PALLET RACKING. DONOR IS DECEASED. SHE WAS UNABLE TO CONTACT NEXT OF KIN.
Catalogue Number
P19770319000
Acquisition Date
1977-06
Collection
Museum
Less detail
Other Name
CITY HALL BENCH
Date Range From
1925
Date Range To
1990
Material Type
Artifact
Materials
WOOD
Catalogue Number
P19980048002
Material Type
Artifact
Other Name
CITY HALL BENCH
Date Range From
1925
Date Range To
1990
Materials
WOOD
No. Pieces
1
Height
90.1
Length
50.5
Width
152.0
Description
A LARGE OFF-WHITE PAINTED OAK BENCH WITH A SEMI-OPEN BACK AND PAINT CHIPS FALLING OFF AROUND ALL FOUR LEGS. NO VISIBLE DISTINCTIVE MARKINGS.
Subjects
FURNITURE
Historical Association
FURNISHINGS
POLITICS
History
BENCH WAS FOUND IN BASEMENT BATHROOM OF OLD CITY HALL BUILDING. BENCH WAS RECOVERED BY MUSEUM ALONG WITH COLLECTION ON REQUEST OF CITY BUILDING OFFICIALS WHO FEARED THAT HALL EMPLOYEES WOULD STEAL CITY PROPERTY DURING THE RELOCATION OF HALL OPERATIONS. OFFICIALS FELT THAT EMPLOYEES MIGHT BELIEVE CITY PROPERTY WAS THEIRS IF IT HAD BEEN IN THEIR OFFICE FOR TWENTY YEARS (EG. ARTWORK). OFFICIALS CALLED THE MUSEUM OVER IN THE MONTHS PRIOR TO THE DEMOLITION OF THE HALL IN ORDER TO INVENTORY SIGNIFICANT PROPERTY AND EVACUATE IT. THE BENCH'S ORIGINAL USE IS NOT KNOWN.
Catalogue Number
P19980048002
Acquisition Date
2002-02
Collection
Museum
Less detail
Other Name
COAL DRILL BIT
Date Range From
1900
Date Range To
1910
Material Type
Artifact
Materials
STEEL
Catalogue Number
P19738001000
Material Type
Artifact
Other Name
COAL DRILL BIT
Date Range From
1900
Date Range To
1910
Materials
STEEL
No. Pieces
1
Length
59.8
Width
5.1
Diameter
3.8
Description
EMBOSSED ON SHANK - "W". STAMPED ON SHANK - "200".
Subjects
MINING & MINERAL HARVESTING T&E
Historical Association
COAL MINING
Catalogue Number
P19738001000
Acquisition Date
1973-03
Collection
Museum
Less detail
Other Name
COAL DRILL BIT EXTENSION
Date Range From
1910
Date Range To
1920
Material Type
Artifact
Materials
STEEL
Catalogue Number
P19738490000
Material Type
Artifact
Other Name
COAL DRILL BIT EXTENSION
Date Range From
1910
Date Range To
1920
Materials
STEEL
No. Pieces
1
Length
66.1
Width
4.4
Description
PAINTED BLACK. APPEARS TO BE AN EXTENSION LENGTH USED TO EXTEND COAL DRILL BITS. SLOTTED TIP WITH NORMAL COAL DRILL BIT TWIST. "JW" EMBOSSED ON SHANK. "237" ENGRAVED ON SHANK, WITH WHITE PAINT ON TOP.
Subjects
MINING & MINERAL HARVESTING T&E
Historical Association
COAL MINING
Catalogue Number
P19738490000
Acquisition Date
1973-01
Collection
Museum
Less detail
Other Name
COAL DRILL BIT
Date Range From
1900
Date Range To
1910
Material Type
Artifact
Materials
IRON
Catalogue Number
P19739112000
Material Type
Artifact
Other Name
COAL DRILL BIT
Date Range From
1900
Date Range To
1910
Materials
IRON
No. Pieces
1
Length
154.3
Description
SIZE 2.7CM TWIST. MANUAL OPERATED. WHITE MARKS ON HANDLE. "G.R" ON FLAT PART OF STEEL ON ONE SIDE BEFORE TWIST.
Subjects
MINING & MINERAL HARVESTING T&E
Historical Association
COAL MINING
Catalogue Number
P19739112000
Acquisition Date
1973-09
Collection
Museum
Less detail
Other Name
COAL DRILL BIT
Date Range From
1900
Date Range To
1910
Material Type
Artifact
Materials
STEEL
Catalogue Number
P19750049000
Material Type
Artifact
Other Name
COAL DRILL BIT
Date Range From
1900
Date Range To
1910
Materials
STEEL
No. Pieces
1
Length
48.9
Width
3.8
Description
EMBOSSED ON SHANK "JWC". STAMPED ON SHANK "100". RUSTED.
Subjects
MINING & MINERAL HARVESTING T&E
Historical Association
COAL MINING
History
FROM THE LOCATELLI FARM AT COALHURST.
Catalogue Number
P19750049000
Acquisition Date
1975-02
Collection
Museum
Less detail
Other Name
COAL DRILL BIT
Date Range From
1900
Date Range To
1910
Material Type
Artifact
Materials
STEEL
Catalogue Number
P19750050000
Material Type
Artifact
Other Name
COAL DRILL BIT
Date Range From
1900
Date Range To
1910
Materials
STEEL
No. Pieces
1
Length
98.6
Diameter
4.4
Description
EMBOSSED ON SHANK "IWO". STAMPED ON SHANK "100". RUSTED.
Subjects
MINING & MINERAL HARVESTING T&E
Historical Association
COAL MINING
History
FROM THE LOCATELLI FARM AT COALHURST
Catalogue Number
P19750050000
Acquisition Date
1975-02
Collection
Museum
Less detail
Other Name
COAL DRILL BIT
Date Range From
1900
Date Range To
1910
Material Type
Artifact
Materials
STEEL
Catalogue Number
P19750051000
Material Type
Artifact
Other Name
COAL DRILL BIT
Date Range From
1900
Date Range To
1910
Materials
STEEL
No. Pieces
1
Length
111.8
Diameter
4.3
Description
EMBOSSED ON SHANK "JWC". STAMPED ON SHANK "100". CONSERVATION REPORT ON FILE.
Subjects
MINING & MINERAL HARVESTING T&E
Historical Association
COAL MINING
History
FROM THE LOCATELLI FARM AT COALHURST
Catalogue Number
P19750051000
Acquisition Date
1975-02
Collection
Museum
Less detail
Date Range From
1910
Date Range To
1920
Material Type
Artifact
Materials
OAK, BRASS, GLASS
Catalogue Number
P19780049000
Material Type
Artifact
Date Range From
1910
Date Range To
1920
Materials
OAK, BRASS, GLASS
No. Pieces
6
Height
171.2
Length
31.0
Width
86.6
Description
4 SHELVES WITH GLASS FRONTS, PULL UP TO OPEN. LABEL ON INSIDE OF SHELVES (RED= "MANUFACTURED BY THE GLOBE-WERNICKS CO. LTD. STRATFORD, ONT. GRADE 299 SIZE D 12 1/4". ONE GLASS SHELF CRACKED AT TOP LEFT CORNER; SECOND IS WARPED, THIRD IS CRACKED AT LOWER LEFT CORNER.
Subjects
FURNITURE
Historical Association
FURNISHINGS
Catalogue Number
P19780049000
Acquisition Date
1977-06
Collection
Museum
Less detail
Other Name
CHILD'S MINIATURE CUPBOARD
Date Range From
1905
Date Range To
1939
Material Type
Artifact
Materials
WOOD, GLASS, BRASS
Catalogue Number
P20000052001
Material Type
Artifact
Other Name
CHILD'S MINIATURE CUPBOARD
Date Range From
1905
Date Range To
1939
Materials
WOOD, GLASS, BRASS
No. Pieces
1
Height
92.2
Length
65.8
Width
34.5
Description
1. MADE OF WOOD; PAINTED WHITE. CUPBOARD HAS 2 LEVELS, THE BOTTOM LEVEL IS WIDER THAN THE TOP. TOP LEVEL HAS TWO DOORS THAT OPEN OUTWARD ON BRASS HINGES. EACH DOOR HAS A GLASS WINDOW (1 OF THE WINDOWS HAS TWO CHRISTMAS STICKERS ON IT), AND A SLIDING LATCH CLOSURE. INSIDE THE CUPBOARD HAS NO FINISH. THE TOP LEVEL HAS ONE SHELF. BELOW TOP LEVEL IS A LEDGE, WITH LAMINATE ON IT (HAS A MARBLIZED EFFECT ON IT). A LARGE CHUNK OF THE LAMINATE IS GONE OFF OF ONE SIDE OF LEDGE. BELOW LEDGE IS AN UNFINISHED WOODEN DRAWER (DRAWER IS NOT ORIGINAL TO PIECE). BELOW DRAWER ARE TWO DOORS, BOTH ON BRASS HINGES AND WITH A SLIDING LATCH CLOSURE. THE INSIDE OF DOORS ARE FINISHED WITH DARK BROWN VARNISH. PAINT IS CHIPPING AND CUPBOARD IS DIRTY. 2. FOUND INSIDE DRAWER WERE TWO EMPTY, WOODEN SPOOLS. ONE HAS A LABEL ON ONE END THAT READS "SUPER SHEEN MERCERISED COTTON COLOR 839 BOILFAST". THE OTHER SPOOL IS SLIGHTLY LARGER, WITH NO LABELS, AND A CHIP OUT OF ONE END.
Subjects
FURNITURE
TOY
Historical Association
FURNISHINGS
LEISURE
History
ON 19 AUGUST 2009, COLLECTIONS TECHNICIAN KEVIN MACLEAN RE-INTERVIEWED DONOR AND ARIZONA RESIDENT JUNE MANCHAK AFTER SHE CONTACTED THE GALT TO SEE HER DONATIONS. ACCORDING TO MANCHAK, THE CHILDREN’S-SIZED TABLE (P20000052001) AND CUPBOARD (P20000052002) WERE MADE BY HER FATHER GEORGE KEARL FOR HIS ELDEST DAUGHTER (DONOR’S SISTER) ARMINTO LUCILLE KEARL. ARMINTO WAS BORN IN 1909 IN AETNA, ALBERTA. THE WOODEN FURNITURE TOYS WERE PLAYED WITH BY ARMINTO AND HER FOUR YOUNGER SISTERS, INCLUDING THE DONOR WHO WAS BORN IN CARDSTON IN 1932. IN 2009, THE DONOR RECALLED PLAYING WITH THE ITEMS IN THE LATE 30S IN AN ABANDONED MODEL ‘A’ CAR ON HER FAMILY’S PROPERTY. THE CAR, SHE SAID, HAD ITS FRONT SEATS TAKEN OUT, PROVIDING HER “PLAYHOUSE” WITH A WIDE FLAT FLOOR. ADDITIONALLY, HER BROTHER RIGGED THE CAR’S DISPLACED FUEL TANK ON THE CAR’S HOOD IN ORDER THAT HIS SISTER HAD A SOURCE OF WATER. COPPER TUBING CARRIED WATER VIA GRAVITY INTO THE CAR AND A SPIGOT CONTROLLED THE FLOW. THE CAR, LIKE A HOUSE, HAD WINDOWS AND DOORS WHICH COULD BE OPENED AND CLOSED AND THE BACK SEAT FOLDED UP IN ORDER THAT STUFF COULD BE STORED AWAY. AND, “OF COURSE I HAD MY DOLLS IN THERE WITH ME TOO”, MANCHAK SAID. SHE MADE MUD PIES AND DECORATED THE TOPS WITH MUSTARD OR STINKWEED SEEDS. SHE COLOURED WATER WITH CREPE PAPER AND POURED THE WATER INTO CLEAR GLASS BOTTLES. AT SOME POINT, THE DONOR’S FATHER APPROACHED HER WITH A REQUEST TO SELL THE CAR – HER PLAYHOUSE – WHICH, SHE SAID, PAINED HIM TO DO ON ACCOUNT THAT HE KNEW WHAT IT MEANT TO HER. THE SALE WAS NECESSARY ON ACCOUNT THAT THE FAMILY NEEDED THE MONEY. SHE ALSO REMEMBERED THE FURNITURE SET BEING PLAYED WITH OUTSIDE WITHIN ABANDONED HOUSE FOUNDATIONS OF A NEIGHBORING YARD. SHE STATED THAT THE SET WAS RELOCATED INTO THE FAMILY HOME DURING THE WINTER MONTHS. MANCHAK'S RECALL (C. 2013) OF THE MINIATURE FURNITURE’S FINAL PLACE OF USE WAS “IN THE BASEMENT, THE LAST LOCATION WHERE [SHE] HAD A PLAYHOUSE”. MUCH OF THE DONOR’S CHILDHOOD PLAY WAS DONE ALONE ON ACCOUNT THAT HER CLOSEST AGED SIBLING WAS HER OLDER BROTHER (4YRS HER SENIOR) AND HER CLOSEST AGED SISTER WAS SEVEN YEARS HER SENIOR AND CHRONICALLY ILL. THE FURNITURE SET REMAINED AT THE FAMILY HOME FOR DECADES, INCLUDING THE PERIOD WHEN ARMINTO, THE ELDEST SISTER, ACQUIRED THE PROPERTY DUE TO HER PARENTS’ PASSING (DATE UNKNOWN). THEREAFTER, THE SET WAS MOVED BY THE SISTER TO AN ADJACENT HOME WHICH SHE HAD BUILT. IN 1998, ARMINTO PASSED AWAY AND THE DONOR INHERITED THE SET, DECIDING IT WAS BEST OFF IF DONATED TO A MUSEUM. OBJECTS RELATED TO THE FAMILY ARE ALSO SAID TO BE IN THE POSSESSION OF THE GLENBOW, HERITAGE PARK AND THE CARDSTON MUSEUM. FOR MORE DETAILED INFORMATION ABOUT THE FAMILY AND ITS MONTANA, UTAH AND S. ALBERTA ORIGINS, PLEASE SEE THE PERMANENT FILE. ********** UPDATE: ON 17 JUNE 2013, DONOR JUNE MANCHAK RE-VISITED THE GALT MUSEUM IN ORDER TO ADVANCE A NEW DONATION OFFER. AT THAT TIME, SHE REQUESTED ACCESS TO THIS OBJECT’S HISTORICAL RECORD. MRS. MANCHAK THEREAFTER REQUESTED FOUR MINOR CHANGES BE MADE AS PER HER LETTER ON RECORD.
Catalogue Number
P20000052001
Acquisition Date
2000-12
Collection
Museum
Less detail
Other Name
LIBRARY CARD CATALOGUE
Date Range From
1965
Date Range To
2010
Material Type
Artifact
Materials
WOOD, PAPER, METAL
Catalogue Number
P20140025001
  2 images  
Material Type
Artifact
Other Name
LIBRARY CARD CATALOGUE
Date Range From
1965
Date Range To
2010
Materials
WOOD, PAPER, METAL
No. Pieces
31
Height
100.75
Length
103.25
Width
46
Description
.1 – WOOD CABINET CONTAINING 30 DRAWERS IN SIX ROWS (.2 - .31). CABINET’S FOUR LEGS AND EDGES ARE SQUARED, WITH THREE METAL ANGLED BRACKETS AND TWO WOODEN CORNER BRACES ATTACHING THE CABINET BODY TO THE LEGS. WOOD IS STAINED BLONDE. STAMPED TEXT IN BLUE INK ON UNDERSIDE OF CABINET READS "MADE IN CANADA". GENERAL WEAR AND SCUFFS OVERALL, ESPECIALLY ALONG TOP FRONT EDGE AND BOTTOM FRONT SKIRTING PANEL. DRIPS OF WHITE PAINT ON EDGES OF BOTH FRONT LEGS AND CABINET BACK EDGES. OVERALL GOOD CONDITION. 100.75 X 46 X 103.25 ALL DRAWERS (.2 - .31) ARE WOOD WITH BRASS LABELPLATES AND MEASURE 9.75 X 14.5 X 41. .2 – FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL READS “LYRICS INDEX”. DRAWER ROD IS IN PLACE; METAL FILING CLIP INSIDE DRAWER AT BACK. .3 – FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL READS “LYRICS INDEX”. DRAWER ROD IS IN PLACE; METAL FILING CLIP INSIDE DRAWER AT BACK. .4 – EMPTY EXCEPT FOR METAL FILING CLIP INSIDE DRAWER AT BACK. NO LABEL OR DRAWER ROD. .5 – HALF FULL OF LOOSE CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. NO LABEL OR DRAWER ROD; METAL FILING CLIP INSIDE DRAWER AT BACK. .6 - EMPTY EXCEPT FOR METAL FILING CLIP INSIDE DRAWER AT BACK. NO LABEL OR DRAWER ROD. .7 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL READS “LYRICS INDEX”. NO DRAWER ROD; METAL FILING CLIP INSIDE DRAWER AT BACK. .8 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL READS “LYRICS INDEX”. DRAWER ROD IS IN PLACE; METAL FILING CLIP INSIDE DRAWER AT BACK. DRAWER ROD BRACKET IS MISSING ONE SCREW AND HANGS LOOSE. .9 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL READS “LYRICS INDEX”. NO DRAWER ROD; METAL FILING CLIP INSIDE DRAWER AT BACK. .10 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL READS “LYRICS INDEX”. NO DRAWER ROD; METAL FILING CLIP INSIDE DRAWER AT BACK. .11 - EMPTY EXCEPT FOR METAL FILING CLIP INSIDE DRAWER AT BACK. NO LABEL; DRAWER ROD IN PLACE. .12 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL IS FADED AND ILLEGIBLE. DRAWER ROD IS IN PLACE; METAL FILING CLIP INSIDE DRAWER AT BACK. .13 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL READS “L.H. NEWS 1989”. DRAWER ROD IS IN PLACE; METAL FILING CLIP INSIDE DRAWER AT BACK. .14 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL READS “L.H. NEWS 1989”. DRAWER ROD IS IN PLACE; METAL FILING CLIP INSIDE DRAWER AT BACK. .15 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL READS “L.H. NEWS 1989”. NO DRAWER ROD; METAL FILING CLIP INSIDE DRAWER AT BACK. .16 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL READS “L.H. NEWS 1989”. NO DRAWER ROD; METAL FILING CLIP INSIDE DRAWER AT BACK. .17 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL READS “L.H. NEWS 1990”. NO DRAWER ROD; METAL FILING CLIP INSIDE DRAWER AT BACK. .18 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL READS “L.H. NEWS 1989”. DRAWER ROD IS IN PLACE; METAL FILING CLIP INSIDE DRAWER AT BACK. .19 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL READS “L.H. BIOGRAPHY 1989 A-J”. DRAWER ROD IS IN PLACE; METAL FILING CLIP INSIDE DRAWER AT BACK. .20 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL READS “L.H. BIOGRAPHY 1989 J-S”. DRAWER ROD IS IN PLACE; METAL FILING CLIP INSIDE DRAWER AT BACK. .21 – HALF FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL READS “L.H. BIOGRAPHY 1989 S-Z”. DRAWER ROD IS IN PLACE; METAL FILING CLIP INSIDE DRAWER AT BACK. .22 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL READS “L.H. BIOGRAPHY 1990 A-K DONE”. DRAWER ROD IS IN PLACE; METAL FILING CLIP INSIDE DRAWER AT BACK. .23 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. NO LABEL. DRAWER ROD IS IN PLACE; METAL FILING CLIP INSIDE DRAWER AT BACK. .24 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL READS “L.H. AUTHORITY”. DRAWER ROD IS IN PLACE; METAL FILING CLIP INSIDE DRAWER AT BACK. .25 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL READS “L.H. AUTHORITY”. DRAWER ROD IS IN PLACE; METAL FILING CLIP INSIDE DRAWER AT BACK. .26 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL IS FADED AND ILLEGIBLE. DRAWER ROD IS IN PLACE; METAL FILING CLIP INSIDE DRAWER AT BACK. .27 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL IS FADED AND ILLEGIBLE. DRAWER ROD IS IN PLACE; METAL FILING CLIP INSIDE DRAWER AT BACK. .28 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL IS FADED AND ILLEGIBLE. DRAWER ROD IS IN PLACE; METAL FILING CLIP INSIDE DRAWER AT BACK. .29 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL READS “CDN… PLAY ANALYTICS”. DRAWER ROD IS IN PLACE; METAL FILING CLIP INSIDE DRAWER AT BACK. .30 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL READS “PLAY ANALYTICS”. DRAWER ROD IS IN PLACE; METAL FILING CLIP INSIDE DRAWER AT BACK. .31 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL READS “PLAY ANALYTICS”. DRAWER ROD IS IN PLACE; METAL FILING CLIP INSIDE DRAWER AT BACK.
Subjects
FURNITURE
DATA PROCESSING T&E
Historical Association
EDUCATION
FURNISHINGS
History
THIS CARD CATALOGUE WAS PRODUCED AND USED BY STAFF AT THE LETHBRIDGE PUBLIC LIBRARY. ON MAY 1, 2015 COLLECTIONS TECHNICIAN KEVIN MACLEAN INTERVIEWED LINDA MCELRAVY, WHO WORKED AT THE LIBRARY’S MAIN BRANCH STARTING IN 1978, RETIRING FROM HER POSITION AS ASSOCIATE DIRECTOR OF PUBLIC SERVICES IN 2008. MCELRAVY EXPLAINED THE CATALOGUING PROCESS AND SUGGESTED THAT IT MAY HAVE BEEN HOUSED IN THE LIBRARY’S SENATOR BUCHANAN ROOM (A REFERENCE RESOURCE OF LOCAL HISTORIES AND GENEALOGIES) AT ONE TIME. MCELRAVY SAID: “WE USED [CARD CATALOGUES] PRIOR TO AUTOMATING OUR CATALOGUE WHICH WOULD HAVE BEEN IN THE EARLY ‘80S… THERE ARE AT LEAST THREE INDEXES [INSIDE THIS SPECIFIC CATALOGUE]… WE USED TO CREATE CARD INDEXES FOR COLLECTIONS AND THINGS THAT YOU COULDN’T FIND… THROUGH NORMAL CATALOGUING PROCESSES. SO, THE FIRST ONE IS… THE SONG INDEX AND THAT WAS MADE UP OF ANALYTICS OF SHEET MUSIC MAGAZINE AND COLLECTIONS AND SONGS – ALL MUSIC AS OPPOSED TO JUST THE LYRICS. SO WE WOULD TAKE COLLECTIONS OF SONGS IN OUR LIBRARY COLLECTION, WE DIDN’T USE ANYTHING THAT WAS NOT AVAILABLE AT THE LETHBRIDGE PUBLIC LIBRARY – SO IT WASN’T A GENERAL THING IT WAS SPECIFIC, A SPECIFIC TOOL TO OUR COLLECTION… IF SOMEONE WANTED A PARTICULAR PIECE OF MUSIC… WE WOULD BE ABLE TO FIND THAT HERE RATHER THAN PEOPLE STANDING AT THE SHELF, LEAFING THROUGH ALL OF THAT… [AT] THE OTHER END OF THE BANK OF CARDS IS THE PLAY INDEX AND THAT’S THE SAME IDEA – THERE WOULD BE ‘AUTHOR’, ‘PLAYWRIGHT’ AND ‘TITLE’ CARDS PUT IN FOR EACH OF THE PLAYS IN COLLECTIONS THAT WE HAD AT LPL. AND THE MIDDLE ONE WAS THE INDEX TO THE LETHBRIDGE HERALD – I THINK SOME OF IT GOES BACK TO ’99 AND BEFORE AND FOR THAT ONE THE STAFF WOULD CUT OUT ARTICLES FROM THE LETHBRIDGE HERALD AND THEN THEY WOULD PUT SUBJECT HEADINGS ON THEM AND MAKE A CORRESPONDING CARD FOR THE CATALOGUE SO THAT THAT WOULD GIVE PEOPLE ACCESS TO THAT [FILE]...” MCELRAVY CONTINUED: “I THINK [THE AUTOMATION OF THE LIBRARY CATALOGUE] WAS IN THE MID ‘80S… [AFTER THAT PROCESS] I’M NOT SURE HOW OFTEN THEY USED [THE CARD CATALOGUES] ANYMORE… PERHAPS IT WAS JUST A QUESTION OF HANGING ON TO IT FOR THE SAKE OF HANGING ON TO IT.. I DON’T SUPPOSE REALLY FOR TOO LONG AFTER THAT IT WOULD [HAVE BEEN] USEFUL… [THE CARD CATALOGUE] REPRESENTS A LOT OF WORK… IT WAS EXPENSIVE TIME-WISE, IT WAS EXPENSIVE MATERIALS-WISE AND IT WAS EXPENSIVE SPACE-WISE… EVEN WITH THE DIGITIZED, AUTOMATED CATALOGUE, THOSE GENERIC ENTRIES DIDN’T NECESSARILY HAVE ANALYTICS… SO THAT’S WHY WE CONTINUED WITH THIS FOR A WHILE AND THEN EVENTUALLY IT JUST SEEMED TO BE NOT WORTH THE EFFORT TO DO IT… IT JUST SEEMED SAD TO ME THAT IT WAS ALMOST LIKE IT WASN’T RECOGNIZED BECAUSE IT WAS TOO OLD – IT HAD HAD ITS DAY BUT THERE’S NO PURPOSE FOR IT ANYMORE… I THINK THAT THIS CERTAINLY SERVED ITS PURPOSE FOR ITS TIME AND IT’S PART OF THE CONTEXT OF THE PERIOD… I OFTEN THINK TODAY WITH INTERNET AND WITH ALL THE ONLINE ACCESS THAT PEOPLE HAVE TO INFORMATION… WHEN YOU HAVE A QUESTION WHAT DO PEOPLE DO NOW? THEY PULL OUT THEIR PHONE, AND THEY GOOGLE, AND THEY GET THE ANSWER. WHEREAS, BEFORE ANY OF THIS HAPPENED THAT WAS WHAT THE LIBRARY DID, THAT WAS THE ROLE OF THE REFERENCE DEPARTMENT. THE LIBRARY IS THERE NOT JUST TO PROVIDE RECREATIONAL READING BUT TO PROVIDE INFORMATION. I’M NOT SAYING THEY’RE NOT DOING THAT ANYMORE, THEY ARE, IN A VERY MUCH MORE SOPHISTICATED WAY BUT THIS WAS ONE OF THE WAYS THAT WE HANDLED THE NEED TO PROVIDE INFORMATION TO PEOPLE.” THE FOLLOWING BRIEF HISTORY OF THE LETHBRIDGE PUBLIC LIBRARY WAS DEVELOPED WITH INFORMATION FROM THE LIBRARY’S WEBSITE. IN 1911 A CITY BYLAW WAS PASSED FOR THE PROVISION OF A LOCAL LIBRARY TO BE ESTABLISHED, AND EIGHT YEARS LATER LETHBRIDGE’S FIRST LIBRARY SERVICE WAS OPERATED OUT OF TWO ROOMS IN THE YMCA BUILDING. IN 1922, THE CARNEGIE LIBRARY BUILDING IN GALT GARDENS OPENED, WITH AN EXTENSION ADDED IN 1951. IN 1956 A NORTH BRANCH WAS OPENED, AND A SOUTH BRANCH FOLLOWED IN 1974. THE LETHBRIDGE PUBLIC LIBRARY MAIN BRANCH ON STAFFORD DRIVE SOUTH WAS COMPLETED IN 1974, WITH AN EXTENSION AND THE ESTABLISHMENT OF THE CHINOOK ARCH REGIONAL LIBRARY SYSTEM IN 1992. IN 1989 THE LIBRARY ADOPTED THE DYNIX AUTOMATED CATALOGUE SYSTEM, AND IN 1997 INTRODUCED PUBLIC INTERNET ACCESS COMPUTERS. IN 2010, THE CROSSINGS BRANCH OPENED IN WEST LETHBRIDGE. SEE PERMANENT FILE FOR HARDCOPIES OF FULL INTERVIEW TRANSCRIPT AND ONLINE SOURCE MATERIAL.
Catalogue Number
P20140025001
Acquisition Date
2014-07
Collection
Museum
Images
Less detail
Date Range From
1980
Date Range To
1990
Material Type
Artifact
Materials
WOOD, GOLD, BRASS
Catalogue Number
P19960109005
Material Type
Artifact
Date Range From
1980
Date Range To
1990
Materials
WOOD, GOLD, BRASS
No. Pieces
6
Height
7.4
Length
30.0
Width
19.9
Description
RECTANGULAR WOOD CASE HAS MEDIUM FINISH AND GOLD POLICE BADGE ON LID. CASE HAS FINGER LOCK CORNERS AND TOP EDGE IS BEVELED. HINGES ON BACK AND LOCKS ON FRONT ARE MADE OF BRASS. GOLD POLICE CREST IS OF CITY COAT OF ARMS WITH QUEEN'S CROWN ON TOP, BEAVER AT BASE AND MAPLE LEAVES AROUND SIDES. COAT OF ARMS HAS "CITY OF LETHBRIDGE 1890 - 1906" RAISED AROUND IT. CENTER FIELD IS SPLIT INTO THREE SECTIONS, ONE HAVING A GLUME OF WHEAT, ONE HAVING AN ARM HOLDING A PICK-AX AND THE LAST WITH COAL TRAIN. BANNER AT TOP READS "POLICE" AND BANNER AT BOTTOM READS "LETHBRIDGE". INSIDE LID AND BOTTOM OF CASE ARE GREY FOAM LINERS WITH NAVY BLUE COVERING. BOTTOM LINER HAS TWO HOLES CUT FOR LOADERS. CASE HAS SINGLE STEEL KEY FOR LOCKS ON FRONT.
Subjects
ARMAMENT-ACCESSORY
Historical Association
SAFETY SERVICES
History
FRANK JAMES BATHGATE WAS BORN IN LETHBRIDGE AND GREW UP IN THE PARK LAKE AREA. HE APPLIED TO THE LETHBRIDGE POLICE FORCE IN 1951 AND WAS APPOINTED CONSTABLE ON JANUARY 14, 1953. HE WAS THEN PROMOTED TO THE RANK OF ACTING SERGEANT IN 1960, AND IN 1967 PROMOTED TO DETECTIVE IN THE CRIMINAL INVESTIGATION BRANCH, WHERE HE WAS APPOINTED HEAD OF NARCOTICS AND DANGEROUS DRUG SECTION OF THE LETHBRIDGE POLICE FORCE. IN 1971 FRANK WAS PROMOTED TO THE RANK OF DETECTIVE SERGEANT AND WAS THE HEAD OF THE NEWLY CREATED CRIMINAL INTELLIGENCE UNIT, IN ADDITION TO HIS DUTIES IN THE DRUG UNIT. ACCORDING TO ONE DOCUMENT (PERM RECORD), HE WAS AN INTEGRAL PART IN THE FORMATION OF THE CRIMINAL INTELLIGENCE SERVICE OF CANADA, WHICH DEALS WITH ORGANIZED CRIME AND OTHER AREAS OF NATIONAL INTEREST. IN JUNE OF 1978 HE WAS PROMOTED TO THE RANK OF INSPECTOR, AND TOOK OVER COMMAND OF THE UNIFORMED PATROL DIVISION. IN AUGUST OF 1979 BATHGATE WAS PROMOTED TO SUPERINTENDENT AND FOURTEEN MONTHS LATER PROMOTED TO DEPUTY CHIEF OF POLICE. HE HELD THIS APPOINTMENT UNTIL HIS RETIREMENT IN 1988. FRANK BATHGATE PASSED AWAY IN 1996.
Catalogue Number
P19960109005
Acquisition Date
1996-12
Collection
Museum
Less detail
Date Range From
1980
Date Range To
1990
Material Type
Artifact
Materials
PLASTIC, FOAM
Catalogue Number
P19960109012
Material Type
Artifact
Date Range From
1980
Date Range To
1990
Materials
PLASTIC, FOAM
No. Pieces
3
Height
7
Length
37.5
Width
24.5
Description
OLIVE DRAB GUN CASE IS RECTANGULAR MOLDED CASE WITH TAB CLOSURES ON FRONT AND MOLDED HANDLE. SURFACE OF CASE IS ROUGH LIKE SNAKESKIN. LID HAS RAISED RECTANGULAR LOGO WHICH READS "MTM CASE-GARD 808" AND "MOLDED PRODUCTS CO. DAYTON OHIO 45414 MADE IN U.S.A.". INSIDE CASE ARE TWO GREY FOAM LINERS WITH EGG-CARTON SURFACE.
Subjects
ARMAMENT-ACCESSORY
Historical Association
SPORTS
SAFETY SERVICES
History
FRANK JAMES BATHGATE WAS BORN IN LETHBRIDGE AND GREW UP IN THE PARK LAKE AREA. HE APPLIED TO THE LETHBRIDGE POLICE FORCE IN 1951 AND WAS APPOINTED CONSTABLE ON JANUARY 14, 1953. HE WAS THEN PROMOTED TO THE RANK OF ACTING SERGEANT IN 1960, AND IN 1967 PROMOTED TO DETECTIVE IN THE CRIMINAL INVESTIGATION BRANCH, WHERE HE WAS APPOINTED HEAD OF NARCOTICS AND DANGEROUS DRUG SECTION OF THE LETHBRIDGE POLICE FORCE. IN 1971 FRANK WAS PROMOTED TO THE RANK OF DETECTIVE SERGEANT AND WAS THE HEAD OF THE NEWLY CREATED CRIMINAL INTELLIGENCE UNIT, IN ADDITION TO HIS DUTIES IN THE DRUG UNIT. ACCORDING TO ONE DOCUMENT (PERM RECORD), HE WAS AN INTEGRAL PART IN THE FORMATION OF THE CRIMINAL INTELLIGENCE SERVICE OF CANADA, WHICH DEALS WITH ORGANIZED CRIME AND OTHER AREAS OF NATIONAL INTEREST. IN JUNE OF 1978 HE WAS PROMOTED TO THE RANK OF INSPECTOR, AND TOOK OVER COMMAND OF THE UNIFORMED PATROL DIVISION. IN AUGUST OF 1979 BATHGATE WAS PROMOTED TO SUPERINTENDENT AND FOURTEEN MONTHS LATER PROMOTED TO DEPUTY CHIEF OF POLICE. HE HELD THIS APPOINTMENT UNTIL HIS RETIREMENT IN 1988. FRANK BATHGATE PASSED AWAY IN 1996.
Catalogue Number
P19960109012
Acquisition Date
1996-12
Collection
Museum
Less detail
Date Range From
1900
Date Range To
1921
Material Type
Artifact
Materials
WOOD, REED
Catalogue Number
P19641347000
Material Type
Artifact
Date Range From
1900
Date Range To
1921
Materials
WOOD, REED
No. Pieces
1
Height
98.0
Length
61.0
Width
61.0
Description
MADE OF UNFINISHED WOOD DOWELS. WOVEN REED SEAT AND BACK. STAMPED ON BACK RUNG "OLD HICKORY CHAIR CO. MARTINVILLE IND."
Subjects
FURNITURE
Historical Association
FURNISHINGS
History
DONOR CLAIMS HANDMADE? IN 1897. *UPDATE* IN 2010 NICOLE HEMBROFF, COLLECTIONS ASSISTANT, CONDUCTED A SURVEY OF PALLET RACKING. DONOR IS DECEASED, SHE WAS UNABLE TO FIND CONTACT INFORMATION FOR NEXT OF KIN.
Catalogue Number
P19641347000
Acquisition Date
1964-03
Collection
Museum
Less detail

99 records – page 1 of 5.