Skip header and navigation

5 records – page 1 of 1.

Other Name
SUPINA SOUVENIR BOWL
Date Range From
1918
Date Range To
1960
Material Type
Artifact
Materials
PORCELAIN
Catalogue Number
P20150016001
  1 image  
Material Type
Artifact
Other Name
SUPINA SOUVENIR BOWL
Date Range From
1918
Date Range To
1960
Materials
PORCELAIN
No. Pieces
1
Height
6
Diameter
21.5
Description
CHINA BOWL WITH AN IRREGULAR RIM THAT EXTENDS A FLORAL PETAL MOTIF ALONG BOWL’S INSIDE EDGE. CENTRE FEATURES COUNTRY LANDSCAPE INCLUDING A COTTAGE, SURROUNDED BY STAMP MARK IN GOLD STENCIL AND SCRIPT, “COMPLIMENTS OF N. F. SUPINA”. GOOD TO VERY GOOD CONDITION. SLIGHT CRACKING IN THE BOTTOM. THE BASE IS SCUFFED AND DIRTY. THERE ARE SOME MARKS ON THE OUTSIDE EDGE.
Subjects
FURNITURE
Historical Association
BUSINESS
COMMEMORATIVE
DOMESTIC
History
EVERAL HORHOZER (NÉE SUPINA) WAS BORN IN LETHBRIDGE IN THE YEAR OF 1927 TO HER PARENTS DONAH (NÉE HILL) AND NICHOLAS SUPINA. SUPINA WAS THE OWNER OF SUPINA’S MERCANTILE ON 13TH STREET NORTH, LETHBRIDGE. COLLECTIONS TECHNICIAN KEVIN MACLEAN CONDUCTED A SERIES OF INTERVIEWS (ON APRIL 2, APRIL 16, AND MAY 7, 2015) WITH HORHOZER REGARDING A GROUP OF ARTIFACTS SHE DONATED TO THE MUSEUM. THE INFORMATION BELOW HAS COME FROM THESE INTERVIEWS AND LETHBRIDGE HERALD RESEARCH REGARDING HORHOZER AND HER FAMILY. THIS BOWL IS A REMINDER OF THE STORE THAT WAS AN INTEGRAL PART OF LIFE IN THE SUPINA FAMILY. HORHOZER REMEMBERS: “MY DAD ALWAYS GAVE A CHRISTMAS GIFT. SO ONE YEAR HE GAVE THE PLATE AND ANOTHER YEAR HE GAVE THIS BOWL AND ACTUALLY THAT’S ALL I KNOW ABOUT IT… [A]LL THE CUSTOMERS, THE ONES THAT DEALT THERE ALL THE TIME [GOT A CHRISTMAS PRESENT]. THE GOOD PAYING ONES AND THE NOT-SO-GOOD PAYING ONES, I THINK THEY PROBABLY EVEN GOT IT TOO, BUT, AS LONG AS THEY WERE CUSTOMERS THEN THEY GOT ONE… MY MOTHER SAVED [IT] FIRSTLY, BECAUSE THEY REALLY MEANT SOMETHING - PART OF THE STORE I GUESS SHE’D SAY. SO, HAD THEM FOR A LONG, LONG TIME… MY MOM HAD ALL KINDS OF ORNAMENTS AROUND AND SHE’D JUST PUT THEM ON A TABLE OR WHATEVER. SHE WOULD CHANGE HER ORNAMENTS EVERY ONCE AND AWHILE, AND THEN SHE’D PUT THESE IN THE CUPBOARD." ABOUT THE HISTORY OF SUPINA’S MERCANTILE, HORHOZER EXPLAINS: “I WAS BORN INTO [THE STORE]. MY DAD STARTED SMALL. HIS DAD HAD A LITTLE CONFECTIONARY; THEN HE TURNED IT INTO A GROCERY STORE AND THEN HE SOLD IT TO MY DAD. MY DAD WAS THE ONE THAT TOOK IT OVER, THAT WAS ALREADY TAKING PLACE WHEN I WAS BORN. THERE WAS NO SPECIFIC MEMORY [OF THAT TRANSITIION] BECAUSE THAT’S ALL I KNEW REALLY.” “… MY DAD WAS BORN IN CZECHOSLOVAKIA. [HIS FAMILY] CAME HERE WHEN HE WAS TWO. [HIS YOUNGER SIBLINGS], THE FIVE BROTHERS AND THE ONE SISTER, WERE ALL BORN IN THAT SAME LITTLE HOUSE THERE. AND THAT’S WHERE MY GRANDPA HAD STARTED THE STORE, IT WAS JUST A CONFECTIONARY. EVENTUALLY IT GREW INTO QUITE A BUSINESS… IN THOSE DAYS, IT WAS HORSE AND BUGGY, SO THEY HAD FIVE HORSES AND BUGGIES THAT WERE RUNNING, WORKING, AND MY UNCLE ALWAYS LOOKED AFTER THE HORSES AND MAINTAINED THEM. THEY’D GO AND THEY’D PICK UP THE ORDER. LOTS OF THE PEOPLE THEN COULDN’T SPEAK ENGLISH, BUT MY DAD COULD SPEAK CZECH, AND THEN THEY’D USUALLY SEND – HE HAD ALL KINDS OF NATIONALITIES WORKING FOR HIM - [A PERSON OF MATCHING ETHNICITY], THAT KNEW THEIR LANGUAGE TO PICK UP THE ORDER. THEY BROUGHT IT BACK TO THE STORE, AND THEN DELIVERED IT BACK TO THE CUSTOMER, THAT WAS REAL SERVICE IN THOSE DAYS, ESPECIALLY WITH HORSE AND BUGGY IN THOSE WINTRY DAYS, AFTER THAT IT DEVELOPED INTO TRUCKS. THERE WERE LOTS OF MINERS IN THOSE DAYS AND WERE GOOD CUSTOMERS… HE AT ONE TIME EMPLOYED THIRTY-SIX PEOPLE IN THE STORE THERE.” AN ARTICLE IN LETHBRIDGE HERALD PUBLISHED ON MAY 5, 2004 STATES THAT NICK SUPINA PURCHASED THE STORE FROM HIS FATHER, MIKE SUPINA, IN 1918. IN THE INTERVIEW, HORHOZER CONTINUED TO SPEAK ABOUT THE BEGINNING DAYS OF THE SUPINA’S STORE: “MY GRANDPA WAS WORKING IN THE MINE. I DON’T KNOW HOW IT CAME THAT HE HAD THIS LITTLE BUSINESS… IT’S MY DAD THEN THAT HAD TO LOOK AFTER THE FAMILY BECAUSE THEY DIDN’T HAVE ANY MONEY. THERE WAS FIVE BOYS SO HE HAD THEM ALL. THEY WERE ALL CLOSE TOGETHER IN AGE. THERE’S STEVE AND BILLY AND JOHN AND MIKE… UNCLE STEVE, IS THE SECOND, HE’S THE ONE THAT STAYED WITH MY DAD, AND JOHNNY DID TOO. THEN THE OTHER TWO PURSUED THEIR OWN BUSINESSES. BILLY HAD A BUSINESS IN RED DEER AND SMALL BUSINESSES IN TWO OTHER PLACES. THEN MIKE, HE WENT TO THE STATES AND—OH, THAT WAS GEORGE, PARDON ME. HE HAD A SHOE STORE WHICH WAS VERY, VERY SUCCESSFUL. MIKE WAS THE ONLY ONE THAT WASN’T IN BUSINESS. THAT WAS BECAUSE HE WAS IN THE WAR…” THINKING BACK ON HER MEMORIES OF SUPINA’S, HORHOZER DESCRIBES, “[I]N THOSE DAYS YOU HAD GOOD FRUIT. I REMEMBER THE DELICIOUS PEACHES. I HAVEN’T SEEN A PEACH LIKE THAT SINCE… LOTS OF TIMES, THE FRUIT WOULD GO OVER-RIPE, LIKE YOUR APRICOTS AND PEACHES. MY MOTHER WOULD GO AND GET ALL THE OVER-RIPE FRUIT AND TAKE IT HOME AND MAKE BEAUTIFUL PIES AND TAKE THE PIES BACK TO THE STORE AND SELL THEM. SHE WAS A WONDERFUL BAKER. THEY DID EVERYTHING LIKE THAT TO HELP MAKE MORE MONEY. SOMETIMES MY DAD WOULD HAVE A SPECIAL ON, 3 CENTS A LOAF [OF BREAD. I HAD LOTS OF ADS FROM THE STORE, AND YOU’D GET SUCH A KICK OUT OF SEEING HAMBURGER, TWENTY-FIVE CENTS A POUND AND THINGS LIKE THAT. SO, YES I REMEMBER.” HORHOZER BEGAN WORKING AT THE STORE AT THE AGE OF 14: “I WORKED IN THE LADIESWEAR. I LIKED THAT VERY MUCH. THE MEAT DEPARTMENT WAS RIGHT ACROSS FROM THE LADIESWEAR. THAT’S KIND OF HOW I MET JOE. HE WORKED IN THE BUTCHER DEPARTMENT. I REMEMBER THE DAY HE WALKED IN THE STORE, I’LL NEVER FORGET [IT], HE HAD THIS RED CARDIGAN SWEATER ON AND I JUST FELL, HEAD OVER RIGHT THEN. HE WAS JUST STARTING WORK AND I THOUGHT, ‘WELL, THAT’S THE GUY I’M GOING TO MARRY.’” HORHOZER BELIEVED THAT AN IMPORTANT PART OF THE STORE’S SUCCESS WAS “… BECAUSE, [OF] THE SERVICE MAINLY. JUST THINK, GOING THERE, GETTING YOUR ORDERS, BRINGING THEM BACK, DOING THEM UP, THEY’D MAKE SURE THINGS WERE TOP QUALITY. THEY GOT TO KNOW EVERY CUSTOMER, OF COURSE, AND THEY KNEW WHAT THEY LIKED. HE HAD WONDERFUL PEOPLE WORKING FOR HIM. THEY JUST GAVE FANTASTIC SERVICE ALL THE TIME. PLUS, MY DAD WAS GRUFF, BUT HE WAS VERY, VERY KIND TO POOR PEOPLE THAT COULDN’T AFFORD –THERE’S LOTS THAT YEARS AFTER HE HAD PASSED AWAY [PEOPLE] WOULD COME UP TO ME AND SAY, ‘IF IT WASN’T FOR YOUR DAD, JOHNNY WOULDN’T HAVE HAD CHEESE,’ OR SOMETHING. I DIDN’T KNOW A THING ABOUT IT, BECAUSE HE WAS ONE THAT NEVER, EVER TOLD ANYBODY… THEN AT CHRISTMAS TIME HE WOULD GO TO THE STORE AND HE HAD A LIST OF EVERYBODY THAT HE KNEW WAS EXCEPTIONALLY POOR, AND HE WOULD FILL BASKETS. HE WOULD DO IT ALL BY HIMSELF… HE WOULDN’T TELL MY MOTHER AND I. HE WAS SO TIGHT-MOUTHED, FILL ALL THESE BASKETS AND DELIVER THEM TO THE PEOPLE HIMSELF WITHOUT TELLING A SOUL ABOUT IT. HE WAS THAT KIND OF PERSON. HE WAS VERY KIND THAT WAY.” SUPINA’S MERCANTILE SERVED LETHBRIDGE UNTIL IT CLOSED IN 1960. HORHOZER REMAINED IN RETAIL IN VARIOUS SHOPS IN THE CITY, INCLUDING THE DEPARTMENT STORE WOOLCO UNTIL HER RETIREMENT IN 1988. HORHOZER PASSED AWAY IN LETHBRIDGE IN 2016 AT THE AGE OF 88 YEARS OLD. PLEASE SEE THE PERMANENT FILE FOR ADDITIONAL INFORMATION ABOUT SUPINA’S MERCANTILE AND THE LIFE OF EVERAL AND HER FAMILY, WHICH INCLUDES THE FULL INTERVIEW TRANSCRIPT AND LETHBRIDGE HERALD ARTICLES.
Catalogue Number
P20150016001
Acquisition Date
2015-05
Collection
Museum
Images
Less detail
Other Name
WOOD, LEATHER
Date Range From
1952
Date Range To
1975
Material Type
Artifact
Materials
WOOD, LEATHER, PAINT
Catalogue Number
P20170019000
  2 images  
Material Type
Artifact
Other Name
WOOD, LEATHER
Date Range From
1952
Date Range To
1975
Materials
WOOD, LEATHER, PAINT
No. Pieces
1
Height
100
Length
41
Width
49
Description
WOODEN CHAIR COATED IN A LIGHT WOOD-COLOURED PAINT. LION’S FEET LEGS IN THE FRONT, DETAILS ON FRONT OF THE LEGS NEAR THE GROUND AND NEAR THE SEAT; DECORATED KNOBS ON TOP OF THE SIDES OF CHAIR. THE BACK SUPPORT IS MADE UP OF ONE WIDE PANEL AND ONE THIN PANEL HORIZONTALLY PARALLEL WITH ORNATE DETAIL WITH OVAL IN THE CENTER OF THE BACKREST. BACKREST IS 4 CM IN WIDTH. WOODEN STRIPES BETWEEN BACK LEGS AND ON EITHER SIDE BETWEEN LEGS. CONDITION: VERY GOOD TO EXCELLENT CONDITION: SLIGHT WEAR ALONG CORNERS OF CHAIR; DARKER WOOD COLOUR SHOWS THROUGH THESE WORN SPOTS ESPECIALLY ON THE TOP OF THE CHAIR; GLUED ON CORNER OF BACK OF CHAIR DESIGN NEAR THE TOP RIGHT CORNER.
Subjects
FURNITURE
Historical Association
FURNISHINGS
PROFESSIONS
History
ON MAY 16TH, 2017 COLLECTIONS TECHNICIAN KEVIN MACLEAN INTERVIEWED DONOR GERALD TODD ABOUT A CHAIR HE DONATED TO THE GALT MUSEUM. TODD BEGAN, “I GOT [THE CHAIR] FROM MY DAD WILLIAM (BILL) TODD. WHEN MY DAD PASSED AWAY, MY MOTHER PASSED IT ON TO ME. I USED IT AT MY DESK AT HOME, WHERE I WOULD SIT ON IT NOW AND THEN TO DO MY PAPERWORK.” HE CONTINUED, “MY DAD GOT [THE CHAIR] FROM [WHEN] HE WAS THE PUBLIC SUPERINTENDENT FOR THE PUBLIC WORKS DEPARTMENT OF ALBERTA. [HE WAS IN THIS POSITION WHEN] THEY WERE RENOVATING THE COURTHOUSE IN LETHBRIDGE – JUST EAST OF CITY HALL – AND WHEN THEY WERE DEMOLISHING THINGS IN THERE, THEY FOUND [THIS CHAIR]. THEY TOLD MY DAD TO THROW IT AWAY, BUT INSTEAD HE ASKED IF HE COULD HAVE IT. THEY TOLD HIM ‘YEAH TAKE IT,’ AND SO HE DID. HE PROBABLY RECEIVED THE CHAIR IN THE MID-1960S – I THINK THAT’S WHEN THEY STARTED TO REVAMP THE COURTHOUSE. I KNOW HE DIED IN ’76, SO I’M JUST GUESSING. IT COULD HAVE BEEN SOONER OR A LITTLE LATER [WHEN HE RECEIVED IT]. BUT AT THAT TIME I WASN’T REALLY INTERESTED IN THE CHAIR MYSELF, [SO I NEVER LEARNED WHAT JUDGES SAT IN IT]… ALL HE TOLD ME [ABOUT IT] WAS THAT IT WAS A JUDGE’S CHAIR IN THE COURTHOUSE. AS FAR AS ANYTHING ELSE GOES, I DON’T KNOW. I THOUGHT, ‘WELL, IT’S JUST A CHAIR’ [I DID NOT BECOME INTERESTED IN IT UNTIL] MY MOTHER SAID, ‘DO YOU WANT THE CHAIR?’ MAYBE SIX MONTHS OR SO [AFTER MY DAD’S PASSING]. I SAID, ‘SURE. DO YOU KNOW ANYTHING ABOUT IT?’ AND SHE SAID, ‘NO, YOUR DAD NEVER TOLD ME. HE JUST BROUGHT IT HOME, PUT IT BY HIS DESK AND THAT WAS IT.’ IT WAS SORT OF A REMEMBRANCE OF MY DAD WORKING.” “[MY DAD] WORKED FOR THE PUBLIC WORKS DEPARTMENT [WITH THE PROVINCE OF ALBERTA] STARTING IN THE ‘50S,” TODD EXPLAINED, “HE WORKED FOR I DON’T KNOW HOW MANY YEARS AND THEN BECAME THE SUPERINTENDENT FOR PUBLIC WORKS FOR SOUTHERN ALBERTA. ANYWHERE THERE WAS A GOVERNMENT BUILDING – FROM THE [CROWSNEST] PASS, TO MEDICINE HAT, TO LETHBRIDGE, AND ALL OVER SOUTHERN ALBERTA – HE WAS IN CHARGE OF THE MAINTENANCE AND REPAIRS.” TODD EXPLAINED THIS CHAIR IS THE ONLY THING FROM A BUILDING HIS FATHER WORKED IN THAT HE ENDED UP BRINGING HOME: “IT WAS JUST ONE ITEM OUT OF PROBABLY MANY THINGS BEING THROWN AWAY. HE JUST HAD ROOM FOR THE CHAIR, SO THAT’S ALL HE TOOK. THEY THREW AWAY THE DESK AND THE JUDGE’S CABINETS, WHICH HE WAS QUITE UPSET [ABOUT], BUT [HE COULD NOT KEEP IT ALL].” WHEN ASKED ABOUT WHY, OUT OF EVERYTHING, HIS FATHER WOULD HAVE SELECTED THIS CHAIR TO BRING TO HOME, TODD SPECULATED, “I THINK IT WAS BECAUSE IT WAS A UNIQUE CHAIR TO HIM AND IT WAS SAT ON BY A JUDGE IN THE COURTHOUSE. [MY FATHER] LIKED THE CHAIR. HE SAT IN IT QUITE A BIT AND IT BRINGS LITTLE MEMORIES OF HIM TO ME. I’D WATCH HIM GO DOWN AND SIT IN THE CHAIR IN THE BASEMENT, WHICH WAS FINISHED. [IT WAS WHERE HE] HAD HIS DESK [AND WHERE HE WOULD] TINKER AROUND. [THE CHAIR] WAS SOMETHING [MY DAD HAD] FOR REMEMBERING HIS WORK. IT WOULD BRING BACK MEMORIES TO MY DAD OF WHAT HE HAD DONE.” “MY DAD WAS IN POLITICS BEFORE. HE DID QUITE A BIT OF WORK WITH THE ALBERTA GOVERNMENT – THE SOCIAL CREDIT GOVERNMENT IT WAS – AND HE HAD JOHN LANDERYOU HERE IN LETHBRIDGE, HARTLEY FROM FORT MACLEOD, AND OTHER FELLAS THAT I DON’T REMEMBER THAT HE ASSOCIATED WITH. HE TOOK IN A LOT OF FUNCTIONS WITH THE GOVERNMENT,” TODD STATED, REMEMBERING HIS FATHER, “MY DAD WAS A GREAT GUY. HE WAS ALWAYS GOOD TO ME. HE GOT ALONG WITH PEOPLE VERY WELL. HE WAS VERY KNOWLEDGEABLE. HE COULD SIT DOWN AND TALK TO ANYBODY.” “[DONATING MY FATHER’S CHAIR TO THE MUSEUM] MAKES ME FEEL GREAT, BECAUSE IT [WILL BE SOMEWHERE] WHERE PEOPLE ARE GOING TO GET TO LOOK AT IT [AND CONNECT WITH ITS HISTORY].” THE OBITUARY OF WILLIAM TODD WAS PUBLISHED IN THE APRIL 29, 1975 EDITION OF THE LETHBRIDGE HERALD. IT READ, “BORN IN BUTTE, MONTANA… TODD CAME TO CANADA WITH HIS PARENTS AT THE AGE OF TWO. HIS PARENTS HOMESTEADED IN THE NEWLANDS DISTRICT SIXTEEN MILES NORTH OF LETHBRIDGE WHERE HE LIVED AND WORKED UNTIL 1920 WHEN HE LEFT THE FARM AND WORKED IN A COAL MINE IN COMMERCE, AND LATER IN COALHURST, WHERE HE MET AND MARRIED MARY (BABE) VICKERS IN 1931. AFTER A SHORT TIME THEY MOVED BACK TO HIS PARENTS’ FARM, WHERE HE FARMED AS WELL AS [WORKED] IN THE COAL MINE AT SHAUGHNESSY.” IT CONTINUES, “IN 1945, HE MOVED TO NOBLEFORD WHERE HE OPERATED THE TODD BROTHERS SEED CLEANING PLANT. IN 1956, HE MOVED TO LETHBRIDGE… HE WAS A VERY ARDENT WORKER FOR BETTER GOVERNMENT FOR ALBERTA AND SPENT A GREAT DEAL OF TIME TO THAT END.” WILLIAM AND MARY TODD HAD ONE SON, DONOR GERALD TODD. WILLIAM TODD PASSED AWAY IN LETHBRIDGE ON APRIL 26TH, 1975 AT THE AGE OF 72 YEARS. A BRIEF HISTORY OF LETHBRIDGE COURTHOUSES TITLED, “BETTER GET TO KNOW A BUILDING -- LETHBRIDGE’S 1952 COURTHOUSE,” WAS PUBLISHED ON JANUARY 30, 2016 BY THE LETHBRIDGE HISTORICAL SOCIETY FOR THEIR FACEBOOK PAGE. THE FOLLOWING INFORMATION HAS BEEN EXTRACTED FROM THAT POST: “LETHBRIDGE’S ‘OLD COURTHOUSE’ LOCATED AT 4 AVENUE AND 11 STREET SOUTH IS ACTUALLY THE 3RD COURTHOUSE LETHBRIDGE HAS HAD. IT WAS OPENED OFFICIALLY IN SEPTEMBER 1952 AND SERVED AS A COURTHOUSE UNTIL 1983 WHEN IT WAS SUPERSEDED BY THE PRESENT COURTHOUSE ON 4 STREET SOUTH. WHILE THE 1952 COURTHOUSE WAS BUILT AS A PROVINCIAL COURTHOUSE, THE ARCHITECTS WERE FROM LETHBRIDGE AND THE DESIGN AND PLACEMENT WAS DONE TO TIE IN WITH THE CITY OF LETHBRIDGE’S URBAN RENEWAL PLANS AND THE CITY’S PLANS FOR CIVIC CENTRE... THE NEW 1952 COURTHOUSE BECAME THE ‘OLD COURTHOUSE’ IN JUNE 1983 WHEN THE COURTHOUSE ON 4 STREET SOUTH WAS BUILT TO REPLACE IT." PLEASE SEE PERMANENT FILE FOR MORE INFORMATION INCLUDING FULL INTERVIEW TRANSCRIPTION, LETHBRIDGE HERALD OBITUARY, AND LETHBRIDGE HISTORICAL SOCIETY TEXT.
Catalogue Number
P20170019000
Acquisition Date
2017-05
Collection
Museum
Images
Less detail
Other Name
SELF-CONTAINED BREATHING APPARATUS TRAINING BACKPACK
Date Range From
1995
Date Range To
2005
Material Type
Artifact
Materials
CANVAS, NYLON, METAL
Catalogue Number
P20150010018
  2 images  
Material Type
Artifact
Other Name
SELF-CONTAINED BREATHING APPARATUS TRAINING BACKPACK
Date Range From
1995
Date Range To
2005
Materials
CANVAS, NYLON, METAL
No. Pieces
1
Height
58.2
Length
35.0
Width
133.2
Description
SELF-CONTAINED BREATHING APPARATUS TRAINING BACKPACK. STEEL AIR TANK, PAINTED MEDIUM GREY, WITH DARK YELLOW CANVAS SHOULDER STRAPS, AND GREEN NYLON WAIST STRAP. MEDIUM GREY STEEL AIR BOTTLE, HELD TO THE HARNESS ASSEMBLY BY A SILVER COLOURED METAL BRACKET. THIS BRACKET HAS A LARGE YELLOW WITH GREEN WRITING STICKER: "MSA AIRMASK MODEL 401". HARNESS ASSEMBLY IS ALSO MEDIUM GREY METAL AND IS ROUGHLY RECTANGULAR IN SHAPE. AT THE TOP OF THE RECTANGLE IS A CIRCLE, WHICH IS WHERE THE YELLOW SHOULDER STRAPS ARE AFFIXED WITH BLACK AND SILVER COLOURED RIVETS TO THE HARNESS ASSEMBLY. YELLOW STRAPS ARE PADDED AND EACH STRAP HAS A SQUARE OF THE LOOP SIDE OF VELCRO AT THE BOTTOMS. THE YELLOW STRAPS ATTACH TO THE RIGID WAIST SUPPORT WITH BLACK NYLON STRAPS. THE ENDS OF THE BLACK STRAPS HAVE A RECTANGULAR PIECE OF THE HOOK SIDE OF VELCRO AND THE VERY ENDS ARE FINISHED WITH A SEMI-CIRCULAR PIECE OF SILVER METAL. THE RIGID WAIST SUPPORT IS PADDED WITH BLACK FABRIC. THE GREEN WAIST STRAPS ARE AFFIXED TO THE RIGID METAL SUPPORT WITH TWO BLACK RIVETS EACH. THE WAIST STRAP CLOSES WITH A SEAT BELT STYLE BUCKLE. THE BUCKLE IS ON THE WEARER'S RIGHT SIDE AND IS STAMPED ON THE REVERSE WITH: "UIO BUCKLE WEAR BELT SNUG. REPLACE IF DAMAGED OR FRAYED." BOTTOM OF AIR BOTTLE IS STAMPED WITH "DOT-3A A2015. D136587 MSA". THE STAMP CONTINUES UNDER THE HARNESS, BUT IS NOT READABLE. PRESSURE GAUGE AND REGULATOR ALSO ON THIS END OF THE BOTTLE. OVERALL IN GOOD CONDITION. BOTTLE APPEARS TO HAVE BEEN YELLOW AND THEN PAINTED GREY. GREY PAINT HAS SCRATCHED OFF ALL OVER THE AIR BOTTLE, REVEALING THE YELLOW SURFACE BELOW. ALL FABRIC STRAPS ARE IN GOOD CONDITION, WITH NO VISIBLE TEARS OR RIPS. YELLOW STRAPS ARE DISCOLOURED.
Subjects
MINING & MINERAL HARVESTING T&E
Historical Association
SAFETY SERVICES
History
THIS SELF-CONTAINED BREATHING APPARATUS TRAINING BACKPACK WAS USED BY THE LETHBRIDGE FIRE DEPARTMENT. IN A WRITTEN STATEMENT PROVIDED AT THE TIME OF DONATION, JESSE KURTZ, DEPUTY CHIEF – SUPPORT SERVICES (RETIRED), EXPLAINED THAT THE “THIS IS JUST A HARNESS FOR TRAINING PURPOSES WITH A STEEL AIR CYLINDER. IT SIMULATES THE ACTUAL WEIGHT AND FEEL OF A REAL SETUP. [IT WAS] ‘HOME BUILT’ FOR TRAINING PURPOSES.” IN THE SUMMER OF 2015, COLLECTIONS TECHNICIAN KEVIN MACLEAN CONDUCTED A SERIES OF INTERVIEWS WITH CURRENT AND FORMER MEMBERS OF THE FIRE DEPARTMENT, INCLUDING TREVOR LAZENBY (HIRED IN 1994). HE RECALLED: “I DON’T THINK I EVER WORN ONE OF THESE AT AN ACTUAL FIRE. I THINK I’VE ONLY EVER WORN THE NEXT GENERATION FIBERGLASS-WRAP … WE HAD THE FIBERGLASS ONES IN FRONTLINE SERVICE WHEN I STARTED, SO THIS WOULD BE PRE-1994, IF I’M NOT MISTAKEN. I DON’T THINK WE HAD THESE ON THE TRUCKS IN ’94. THEY WERE AROUND AND THEY WERE BACKUPS, BUT THEY WEREN’T FRONTLINE … WE KEPT ONE OR TWO AT THE NORTHSIDE FIRE HALL AND AT THE WESTSIDE FIRE HALL BECAUSE WHEN GUYS AT LUNCHTIME HAVE A WORKOUT, OR AFTER WORK, THEY’LL HAVE A WORKOUT AND THEY’LL ACTUALLY PUT THE OLD HEAVY STEEL BOTTLE ON AND THEY’LL CLIMB THE STAIRS – SO IT’S USED TO WORK OUT AND NOTHING ELSE. VERY, VERY UNCOMFORTABLE. VERY HEAVY DESIGN.” SEE PERMANENT FILE FOR FULL INTERVIEW TRANSCRIPTS AND ADDITIONAL INFORMATION ABOUT THE LETHBRIDGE FIRE DEPARTMENT.
Catalogue Number
P20150010018
Acquisition Date
2015-02
Collection
Museum
Images
Less detail
Other Name
SELF-CONTAINED BREATHING APPARATUS / AIR MASK AND HARNESS
Date Range From
1975
Date Range To
2000
Material Type
Artifact
Materials
PLASTIC, METAL, COTTON
Catalogue Number
P20150010017
  2 images  
Material Type
Artifact
Other Name
SELF-CONTAINED BREATHING APPARATUS / AIR MASK AND HARNESS
Date Range From
1975
Date Range To
2000
Materials
PLASTIC, METAL, COTTON
No. Pieces
5
Height
29.2
Length
68.8
Width
50.7
Description
SELF-CONTAINED BREATHING APPARATUS, INCLUDES CASE, HARNESS ASSEMBLY, MASK WITH STRAP, AND PAPER PASS CERTIFICATE. .A: CASE. BLACK MOULDED, TEXTURED PLASTIC CASE. ROUGHLY RECTANGULAR SHAPED. HINGED AT THE BACK, CASE HAS THREE HANDLES ON THE FRONT: ONE IS IN THE CENTRE OF THE CASE, WITH THE OTHER TWO ARE ON THE CORNERS OF THE BOX. THERE ARE TWO PLASTIC LATCHES BETWEEN THE THREE HANDLES. BLACK AND SILVER COLOURED STICKER ON THE TOP OF THE BOX READS: "MSA AIRMASK". A SECOND BLACK AND SILVER STICKER, ABOVE ONE OF THE LATCHES, READS: "ULTRALITE PRESSURE DEMAND" AND ALSO HAS "PASS IN BOX" HANDWRITTEN IN BLACKMARKER. A THIRD BLACK AND SILVER STICKER THAT READS "MSA AIRMASK" IS ON THE BOTTOM OF THE BOX. YELLOW PIECE OF DUCT TAPE ON RIGHT SIDE, HANDWRITTEN IN BLACK INK: "ULTRALITE BMR". INSIDE THE BOX IS SUBDIVIDED INTO COMPARTMENTS. AFFIXED TO THE INSIDE TOP OF THE LID IS A PAGE OF INSTRUCTIONS TITLED "MSA AIR MASK, PRESSURE DEMAND TYPE". A SMALL PIECE OF PAPER AFIXED TO THE INSIDE OF THE LID IS TITLED "PACKING ARRANGEMENT" AND HAS AN ILLUSTRATION OF HOW THE UNIT SHOULD BE PACKED AWAY. DIMENSIONS PROVIDED ABOVE CORRESPOND TO THIS CASE. OVERALL IN FAIR TO GOOD CONDITION. THE TWO "MSA AIRMASK" STICKERS HAVE PARTIALLY PEELED AWAY, WITH THE TOP STICKER MISSING THE BOTTOM OF "ASK" IN "MASK" AND WITH THE BOTTOM STICKER MISSING PARTS OF THE "MSA": THE "M" AND "A" ARE PARTIALLY MISSING, WHILE THE "S" IS ENTIRELY GONE; "MASK" OF THIS STICKER IS ALSO VERY DAMAGED. LATCH BELOW THE "ULTRALITE" STICKER IS IN GOOD CONDITION, WHILE THE OTHER IS PARTIALLY BROKEN. SEVERAL SCUFFS AND SCRATCHES IN THE PLASTIC, ESPECIALLY ALONG THE BOTTOM. .B: HARNESS ASSEMBLY. BLACK PLASTIC, METAL, AND FABRIC WITH SILVER COLOURED METAL. OUTER PORTION OF HARNESS DESIGNED TO HOLD BOTTLE OF COMPRESSED AIR. BLACK METAL BRACKET RUNS VERTICALLY UP AND DOWN THE HARNESS AND HAS A SILVER COLOURED CIRCULAR METAL BAND TO HOLD TANK IN PLACE. THE SILVER BAND IS 7.7CM WIDE AND HAS TWO BLACK STICKERS WITH “MSA” IN YELLOW STUCK ON. BOTTOM OF BLACK METAL BRACKET HAS A TRIANGULAR SHAPED PIECE, WITH A ROUND RUBBER TIP, TO HOLD THE BOTTOM OF THE AIR TANK IN PLACE. BELOW SILVER BAND IS A STICKER, WITH A DISCOLOURED WHITE BACKGROUND AND BLACK LETTERS GIVING INSTRUCTIONS FOR USE, ENTITLED: “CUSTOM 4500/ULTRALITE BELT MOUNTED SCBA. OPEN CIRCUIT, PRESSURE-DEMAND ENTRY AND ESCAPE SELF-CONTAINED BREATHING APPARATUS OR COMBINATION SELF-CONTAINED BREATHING APPARATUS AND TYPE C SUPPLIED AIR RESPIRATOR.” SILVER BAND FOR TANK HAS A HANDLE THAT EXPANDS AND CONTRACTS THE BAND, TO ALLOW FOR REMOVAL AND INSTALLATION OF AIR TANK. AT THE TOP OF THE BLACK METAL BRACKET, THERE IS A CIRCULAR SECTION WHICH ALLOWS FOR THE ATTACHMENT OF TWO BLACK PADDED FABRIC SHOULDER STRAPS. THESE STRAPS ARE BOLTED ON WITH BLACK AND SILVER COLOURED BOLTS. BLACK METAL BRACKET ATTACHES AT WAIST AREA TO BLACK MOULDED PIECE OF PLASTIC. BLACK MOULDED PLASTIC FITS AROUND THE HIP AREA OF THE WEARER. SHOULDER STRAPS COME DOWN FROM TOP OF METAL BRACKET AND ATTACH TO THIS BLACK PLASTIC JUST ABOVE THE HIP. SHOULDER STRAPS ARE PADDED AND HAVE A SECOND SMALLER STRAP, WHICH WOULD CROSS THE WEARER’S CHEST WITH A BLACK SIDE RELEASE PLASTIC BUCKLE, WITH THE FEMALE COMPONENT ON THE RIGHT STRAP. ON EACH STRAP BELOW THE PLASTIC BUCKLE IS A SILVER COLOURED “D” RING. ABOVE THE BUCKLE ON EACH STRAP IS A SILVER COLOURED SILK SCREEN SECTION WITH “MSA”. AT THE BOTTOM WAIST PORTION OF THE MOULDED PLASTIC IS ANOTHER BLACK FABRIC STRAP, TO GO AROUND THE WEARER’S WAIST. THE BELT ATTACHES WITH A SILVER COLOURED METAL LATCH PLATE ON THE RIGHT SIDE, WHICH FITS INTO A BLACK PLASTIC BUCKLE, WITH A BLACK PLASTIC BUTTON TO RELASE, ON THE WEARER’S LEFT SIDE. ATTACHED TO THE LEFT SIDE OF THE BELT IS A PRESSURE REGULATOR AND HIGH PRESSURE SUPPLY HOSE. THE PRESSURE REGULATOR CONSISTS OF BLACK METAL AND PLASTIC, AND GOLD AND RED COLOURED METAL. A CIRCULAR GOLD COLOURED METAL PIECE HAS REMNANTS OF TWO STICKERS ON ITS FACE: “MSA AIR MASK – MFD BY MINE SAFETY APPLIANCES COMPANY – PITTSBURGH, PENNSYLVANIA – PRESSURE DEMAND.” BELOW IT IS A HOSE COUPLING. THIS COUPLING HAS A BLACK RUBBER CAP, EMBOSSED WITH “FHR”. BESIDE THIS IS AN AIR PRESSURE GAUGE: BLACK METAL TEXTURED EDGE, GLASS FACE, AND RUBBER ENCASING. THE FACE OF THE GAUGE IS OFF-WHITE WITH A DIAL INCRESING IN INCREMENTS OF 5 (5, 10, 15, 20, 25, 30), WITH A RED SECTION FROM 0-5, A YELLOW SECTION BETWEEN 20 AND 25, AND A GREY SECTION AT 30. BELOW THE DIAL IS “PSI X 100 – USE NO OIL – MSA 18” BESIDE THE GAUGE IS A RED COLOURED METAL KNOB, WITH “ß OPEN – BY PASS” EMBOSSED ON FRONT FACE. BESIDE THIS RED KNOB IS A GOLD COLOURED KNOB WITH A SILVER COLOURED TAB “^PUSH^”. ON THE FACE OF THE GOLD KNOB, EMBOSSED, IS “MAIN LINE ^” WITH “MSA” IN CENTRE. OPPOSITIE THE PRESSURE GAUGE IS A HIGH PRESSURE SUPPLY HOSE. THE HOSE IS BLACK PLASTIC AND FABRIC. ON THE END OF THIS HOSE IS A SILVER COLOURED BELL, USED AS A LOW AIR ALARM. AT THE VERY END OF THE HOSE IS A BLACK TEXTURED METAL COUPLING. .C: MASK WITH HOSE. BLACK PLASTIC RESPIRATOR MASK WITH CLEAR PLASTIC VISOR. FITTED NOSE PIECE WITH TWO SMALL CIRCLES ON EITHER SIDE OF BRIDGE OF NOSE PIECE. EACH CIRCLE HAS BLACK PLASTIC SPOKES AND A TRANSPARENT FLAP, WHICH IS ON THE INSIDE OF THE NOSE PIECE. HANDWRITTEN IN GOLD COLOURED INK, ON THE INSIDE OF NOSE PIECE, “G29C” OR “929C”. FRONT OF NOSE PIECE, VISIBLE THROUGH THE VISOR, HAS “MEDIUM” EMBOSSED ONTO MASK. FIVE BLACK PLASTIC STRAPS WITH SILVER COLOURED BUCKLES ALLOW MASK TO BE SECURELY TIGHTENED ONTO THE HEAD. STRAPS MEET AT A ROUGHLY STAR-SHAPED PIECE THAT SITS AT THE BACK OF THE HEAD. THIS STAR-SHAPED PIECE HAS THE FOLLOWING EMBOSSED ONTO THE PLASTIC: “M2 C5 – MSA – PULL FRONT STRAP LAST – U”. ABOVE THE “M2 C5” IS AN EMBOSSED MULTI-SPOKED CIRCLE. EMBOSSED IN THE CENTRE OF THE CIRCLE: “93 – 94 – 95” EACH OF THE FIVE STRAPS ARE LABELLED; TWO AT THE BASE OF MASK, EACH LABELLED “NECK”, NEXT TWO UP ARE “SIDE”, AND THE FIFTH STRAP AT THE TOP OF THE MASK IS “FRONT”. ON FRONT OF MASK, AT THE MOUTH AREA, IS A LONG ACCORDION-STYLE HOSE. IT IS ATTACHED TO THE MASK WITH A SILVER COLOURED METAL CLAMP. ON THE NUT OF THIS CLAMP IS WRITTEN “ALL STAINLESS BREEZE”. BELOW IS A BLACK METAL BAND, WHICH IS STAMPED IN YELLOW WITH “-18 TINNERMAN”. BELOW THAT THERE IS A SILVER COLOURED METAL RING, WHICH HAS A BLACK FABRIC STRAP ATTACHED (SEE BELOW FOR DESCRIPTION OF THIS ITEM, P20150010017D). THE BOTTOM OF THE HOSE HAS A BLACK METAL BAND AND THEN A SILVER COLOURED, TEXTURED METAL PIECE TO CONNECT TO THE AIR SUPPLY CANISTER. BELOW THE HOSE CONNECTION, AT THE CHIN AREA OF THE MASK, IS A MEDIUM-LIGHT GREY CIRCLE, EMBOSSED WITH “MSA – U.S. PAT. 4,007,758”. TO THE RIGHT OF THE HOSE ATTACHEMENT HANDWRITTEN IN GREEN INK IS “#4”. ON THE RIGHT SIDE OF THE MASK, BETWEEN THE “NECK” AND “SIDE” STRAPS IS A FAINT STAMP IN YELLOW “7-212-“. EMBOSSED IN CENTRE OF MASK, ABOVE FACE VISOR, IS “MSA” IN A CIRCLE. INSIDE OF THE HOSE ATTACHMENT, BELOW THE MOULDED NOSE AREA, IS A BLACK DISK WITH HOLES IN IT. VISIBLE THROUGH THESE HOLES IS A PIECE OF GOLD-COLOURED METAL. DIMENSIONS OF MASK: HOSE IS 83.5CM LONG; VISOR IS 18CM WIDE. .D: STRAP ON MASK. BLACK FABRIC STRAP, WITH TWO BLACK SNAPS. SNAPS ONTO SILVER-COLOURED METAL RING AROUND THE HOSE. STRAP IS 92.5CM LONG AND 1.9CM WIDE. OVERALL CONDITION OF B, C, D: WELL WORN. ALL STICKERS SHOW SIGNS OF WEAR: DISCOLOURATION AND FINISH OF STICKERS SCRATCHED. STRUCTRUALLY IN GOOD CONDITION. MANY SCUFFS AND SCRATCHES ALL OVER. ALL FABRIC IN GOOD CONDITION. RUBBER RETAINS FLEXIBILITY AND PLASTICS ARE IN GOOD SHAPE WITH NO CRACKS. .E: PAPER PASS CERTIFICATE. GOLDENROD COLOURED PAPER. READS: "MSA - ULTRALITE DP - B.M.R. C/W FACEMASK. THIS UNIT TESTED AND HAD ACCEPTABLE PERFORMANCE ON SEPTEMBER 02, 2008. KEN HOBIAK" (WITH KEN'S SIGNATURE ABOVE HIS TYPED NAME). REVERSE OF PAPER: "THIS UNI PERFORM KEN H" (APPEARS TO HAVE MISPRINTED ON THIS SIDE). PAPER IS STANDARD LETTER SIZE. CONDITION IS GOOD: PAPER HAS BEEN CRUMBLED AND HAS A FEW SMALL TEARS AROUND THE OUTSIDE.
Subjects
MINING & MINERAL HARVESTING T&E
Historical Association
SAFETY SERVICES
History
THIS SELF-CONTAINED BREATHING APPARATUS (SCBA) WAS USED BY THE LETHBRIDGE FIRE DEPARTMENT. IN A WRITTEN STATEMENT PROVIDED AT THE TIME OF DONATION, JESSE KURTZ, DEPUTY CHIEF – SUPPORT SERVICES (RETIRED), EXPLAINED THAT THE MASK WAS “USED BY ALL FIREFIGHTERS TO CONNECT TO THE BELT MOUNTED REGULATOR SCBA TO ENTER HAZARDOUS ATMOSPHERES” AND THAT THE HARNESS WAS “USED BY ALL FIREFIGHTERS TO BREATH IN HAZARDOUS (SMOKY) ATMOSPHERES.” HE CONTINUED SAYING THAT THERE ARE “MORE MODERN MASK MOUNTED REGULATOR SCBAS [THAT HAVE BEEN] DEVELOPED AND PURCHASED.” IN THE SUMMER OF 2015, COLLECTIONS TECHNICIAN KEVIN MACLEAN, CONDUCTED A SERIES OF INTERVIEWS WITH CURRENT AND FORMER MEMBERS OF THE FIRE DEPARTMENT, INCLUDING: CLIFF “CHARLIE” BROWN (HIRED IN 1966, RETIRED 2004), TREVOR LAZENBY (HIRED IN 1994), AND LAWRENCE DZUREN (HIRED 1959, RETIRED 1992). BROWN EXPLAINED THAT THIS SCBA “WAS AN ON-DEMAND REGULATOR. THAT WAS NICE TO HAVE DEMAND, BECAUSE NO MATTER WHO IT WAS, THE HARDER YOU BREATHED, THE MORE AIR IT WOULD GIVE YOU. THE HARNESS IS PROBABLY MORE COMFORTABLE [THAN PREVIOUS ONES]. SOME GUYS WOULD USE THREE TANKS, SO THE HARNESS WAS A LITTLE BIT MORE COMFORTABLE FOR THEM. THEY’D COME OUT, THEY’D TURN AROUND, THEY WOULDN’T EVEN TAKE OFF THEIR GEAR. THEY’D TURN AROUND, THERE’D BE GUYS WHO WOULD TAKE THE TANK OFF, PUT ANOTHER TANK ON, HOOK IT ALL UP, A GOOD PAT ON THE BACK, AND BACK IN THEY’D GO WITH ANOTHER TANK. THEY’D DO THAT THREE TIMES BEFORE … THEY WERE JUST TOO TIRED … WE DIDN’T HAVE AN AIR COMPRESSOR TO FILL OUR OWN TANKS. I CAN’T REMEMBER WHERE THEY WENT. THEY MUST HAVE WENT TO THE SWIMMING POOL.” LAZENBY CONTINUED SAYING THAT THIS SCBA WAS “A VERY, VERY OLDER GENERATION SCBA BOTTLE. THESE WERE KIND OF RUDIMENTARY DESIGN. THE BOTTLE WAS STEEL ON THESE, WHICH MADE THEM VERY, VERY HEAVY. MODERN BOTTLES ARE FIBERGLASS WRAPPED WHICH MAKES THEM MUCH, MUCH LIGHTER; ADDED TO WHICH, IT HAD A BARELY PADDED HARNESS SYSTEM ON IT AND BASICALLY A GLORIFIED SEATBELT STRAP FOR A WAIST STRAP. SO WITH THESE KINDS OF THINGS, YOU DON’T WANT TO KEEP A TON OF WEIGHT ON YOUR SHOULDERS BECAUSE IT FATIGUES YOUR UPPER BODY VERY, VERY QUICKLY WHEN YOU’RE WORKING. BUT WITH THIS TYPE OF HARNESS ON THEM, IF YOU CINCHED THE WAIST UP REALLY TIGHT AND TOOK THE PRESSURE OFF YOUR SHOULDERS, THIS JUST SEEMED TO DIG INTO YOUR WAIST LIKE CRAZY, LIKE IT WAS VERY UNCOMFORTABLE TO WEAR … THAT BEING SAID, WHEN GUYS WENT TO THIS FROM LIKE THE CANISTERS THAT THEY USED TO WEAR, THIS MUST HAVE BEEN LIKE A NEW LEASE ON LIFE FOR THESE GUYS … I WORE THESE IN TRAINING – I DON’T THINK I EVER WORE ONE OF THESE BOTTLES ON AN ACTUAL FIRE CALL … WE HAD THE FIBERGLASS ONES IN FRONTLINE SERVICE WHEN I STARTED SO THIS WOULD BE PRE-1994, IF I’M NOT MISTAKEN. I DON’T THINK WE HAD THESE ON THE TRUCKS IN ’94. THEY WERE AROUND AND THEY WERE BACKUPS, BUT THEY WEREN’T FRONTLINE.” HE ELABORATED FURTHER, SAYING: “WE DIDN’T HAVE INDIVIDUAL MASKS; WE SHARED MASKS ON THE FIRE DEPARTMENT BACK THEN … THERE WASN’T ENOUGH MONEY FOR THEM TO BUY US OUR OWN INDIVIDUAL FACE PIECE … SO WHAT WE USED TO DO IS AFTER EVERY INCIDENT OR AFTER EVERY TIME YOU WORE ONE OF THESE THINGS, IT WOULD COME OFF THE TRUCK, WE WOULD HAVE A BOTTLE OF MSA MASK CLEANER THAT WE WOULD PUT INTO A TUB, WE WOULD MAKE A SOAPY WATER SOLUTION, WE WOULD WASH THE MASK, RINSE THE MASK, LET IT HANG TO DRY, AND THE NEXT PERSON WOULD USE IT AS THE NEXT SHIFT CAME ON.” HE ADDED THAT NOW EVERYONE IN THE DEPARTMENT HAS THEIR OWN MASK: “WE’VE HAD OUR OWN MASKS FOR 10-12 YEARS. WE STILL SHARE THE SCBAS AS FAR AS THE BOTTLE AND THE HARNESS GOES … THEY’RE IN THE RACKS ON THE TRUCK, IN THE BACKS OF THE SEATS AND DOWN IN BY THE HOSE OR THE PUMP COMPARTMENTS.” IN DISCUSSING WHY THIS MODEL IS NO LONGER USED, LAZENBY STATED: “THIS HOSE EASILY CRIMPED SO YOUR AIR SUPPLY COULD BE CUT OFF. THE AIR SUPPLY THAT NOW GOES FROM THE TANK TO YOUR MASK IS A MUCH MORE RIGID HOSE THAT, REALLY, YOU’D HAVE TO BASICALLY BEND IT IN HALF TO STOP THE FLOW OF AIR.” DZUREN ADDED FURTHER: “PRIOR TO [THIS] OUR BREATHING APPARATUS WAS WHAT THEY CALLED A CANISTER TYPE OF BREATHING APPARATUS … IT WAS JUST A CANISTER THAT YOU HAD IN FRONT OF YOU HERE AND IT WAS LAYERS OF … GEL, AND SAND, AND SILICA … THERE WAS A SHELF-LIFE WITH THOSE THINGS. IF YOU USED THEM, YOU PRETTY WELL HAD TO DISCARD THEM AFTER YOU USED THEM.” WHEN ASKED WHEN THIS TYPE OF SCBA CAME INTO SERVICE, DZUREN STATED: “I WOULD PROBABLY SAY MAYBE IN THE ‘70S SOMETIME? … I RECALL GUYS GOING IN WHEN WE JUST HAD THOSE CANISTERS. THEY WOULD GO WITHOUT ANYTHING. AND THEY WOULD COME OUT AFTER A WHILE AND THEY WOULD BE BARFING THEIR GUYS OUT … IT SEEMED TO BE, EVEN PRIOR TO MY TIME, WHEN THE STORIES I HEARD FROM GUYS THERE LONGER THAN MYSELF, THAT SEEMED TO BE THE MACHO THING. GET IN THERE AND THEY’D GET IN THERE WITHOUT A MASK. BUT EVENTUALLY, YOU KNOW, BETTER THINKING CAME ALONG AND SAID ‘DON’T BE SILLY, GET SOME STUFF ON THERE.’ BUT ONCE THEY GOT IT, AND THEY STARTED TO USE IT, YOU DID FEEL A LOT BETTER GOING IN, ‘CAUSE PRIOR TO USE GETTING THAT WE HEARD THE HORROR STORIES OF GUYS WHO DID SUCCUMB TO THE ELEMENTS BECAUSE OF ALL THOSE CANISTER TYPES, BUT ONCE THEY GOT [THIS SCBA] IT WAS BETTER.” SEE PERMANENT FILE FOR FULL INTERVIEW TRANSCRIPTS AND ADDITIONAL INFORMATION ABOUT THE LETHBRIDGE FIRE DEPARTMENT.
Catalogue Number
P20150010017
Acquisition Date
2015-02
Collection
Museum
Images
Less detail
Other Name
LIBRARY CARD CATALOGUE
Date Range From
1965
Date Range To
2010
Material Type
Artifact
Materials
WOOD, PAPER, METAL
Catalogue Number
P20140025001
  2 images  
Material Type
Artifact
Other Name
LIBRARY CARD CATALOGUE
Date Range From
1965
Date Range To
2010
Materials
WOOD, PAPER, METAL
No. Pieces
31
Height
100.75
Length
103.25
Width
46
Description
.1 – WOOD CABINET CONTAINING 30 DRAWERS IN SIX ROWS (.2 - .31). CABINET’S FOUR LEGS AND EDGES ARE SQUARED, WITH THREE METAL ANGLED BRACKETS AND TWO WOODEN CORNER BRACES ATTACHING THE CABINET BODY TO THE LEGS. WOOD IS STAINED BLONDE. STAMPED TEXT IN BLUE INK ON UNDERSIDE OF CABINET READS "MADE IN CANADA". GENERAL WEAR AND SCUFFS OVERALL, ESPECIALLY ALONG TOP FRONT EDGE AND BOTTOM FRONT SKIRTING PANEL. DRIPS OF WHITE PAINT ON EDGES OF BOTH FRONT LEGS AND CABINET BACK EDGES. OVERALL GOOD CONDITION. 100.75 X 46 X 103.25 ALL DRAWERS (.2 - .31) ARE WOOD WITH BRASS LABELPLATES AND MEASURE 9.75 X 14.5 X 41. .2 – FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL READS “LYRICS INDEX”. DRAWER ROD IS IN PLACE; METAL FILING CLIP INSIDE DRAWER AT BACK. .3 – FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL READS “LYRICS INDEX”. DRAWER ROD IS IN PLACE; METAL FILING CLIP INSIDE DRAWER AT BACK. .4 – EMPTY EXCEPT FOR METAL FILING CLIP INSIDE DRAWER AT BACK. NO LABEL OR DRAWER ROD. .5 – HALF FULL OF LOOSE CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. NO LABEL OR DRAWER ROD; METAL FILING CLIP INSIDE DRAWER AT BACK. .6 - EMPTY EXCEPT FOR METAL FILING CLIP INSIDE DRAWER AT BACK. NO LABEL OR DRAWER ROD. .7 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL READS “LYRICS INDEX”. NO DRAWER ROD; METAL FILING CLIP INSIDE DRAWER AT BACK. .8 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL READS “LYRICS INDEX”. DRAWER ROD IS IN PLACE; METAL FILING CLIP INSIDE DRAWER AT BACK. DRAWER ROD BRACKET IS MISSING ONE SCREW AND HANGS LOOSE. .9 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL READS “LYRICS INDEX”. NO DRAWER ROD; METAL FILING CLIP INSIDE DRAWER AT BACK. .10 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL READS “LYRICS INDEX”. NO DRAWER ROD; METAL FILING CLIP INSIDE DRAWER AT BACK. .11 - EMPTY EXCEPT FOR METAL FILING CLIP INSIDE DRAWER AT BACK. NO LABEL; DRAWER ROD IN PLACE. .12 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL IS FADED AND ILLEGIBLE. DRAWER ROD IS IN PLACE; METAL FILING CLIP INSIDE DRAWER AT BACK. .13 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL READS “L.H. NEWS 1989”. DRAWER ROD IS IN PLACE; METAL FILING CLIP INSIDE DRAWER AT BACK. .14 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL READS “L.H. NEWS 1989”. DRAWER ROD IS IN PLACE; METAL FILING CLIP INSIDE DRAWER AT BACK. .15 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL READS “L.H. NEWS 1989”. NO DRAWER ROD; METAL FILING CLIP INSIDE DRAWER AT BACK. .16 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL READS “L.H. NEWS 1989”. NO DRAWER ROD; METAL FILING CLIP INSIDE DRAWER AT BACK. .17 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL READS “L.H. NEWS 1990”. NO DRAWER ROD; METAL FILING CLIP INSIDE DRAWER AT BACK. .18 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL READS “L.H. NEWS 1989”. DRAWER ROD IS IN PLACE; METAL FILING CLIP INSIDE DRAWER AT BACK. .19 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL READS “L.H. BIOGRAPHY 1989 A-J”. DRAWER ROD IS IN PLACE; METAL FILING CLIP INSIDE DRAWER AT BACK. .20 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL READS “L.H. BIOGRAPHY 1989 J-S”. DRAWER ROD IS IN PLACE; METAL FILING CLIP INSIDE DRAWER AT BACK. .21 – HALF FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL READS “L.H. BIOGRAPHY 1989 S-Z”. DRAWER ROD IS IN PLACE; METAL FILING CLIP INSIDE DRAWER AT BACK. .22 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL READS “L.H. BIOGRAPHY 1990 A-K DONE”. DRAWER ROD IS IN PLACE; METAL FILING CLIP INSIDE DRAWER AT BACK. .23 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. NO LABEL. DRAWER ROD IS IN PLACE; METAL FILING CLIP INSIDE DRAWER AT BACK. .24 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL READS “L.H. AUTHORITY”. DRAWER ROD IS IN PLACE; METAL FILING CLIP INSIDE DRAWER AT BACK. .25 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL READS “L.H. AUTHORITY”. DRAWER ROD IS IN PLACE; METAL FILING CLIP INSIDE DRAWER AT BACK. .26 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL IS FADED AND ILLEGIBLE. DRAWER ROD IS IN PLACE; METAL FILING CLIP INSIDE DRAWER AT BACK. .27 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL IS FADED AND ILLEGIBLE. DRAWER ROD IS IN PLACE; METAL FILING CLIP INSIDE DRAWER AT BACK. .28 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL IS FADED AND ILLEGIBLE. DRAWER ROD IS IN PLACE; METAL FILING CLIP INSIDE DRAWER AT BACK. .29 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL READS “CDN… PLAY ANALYTICS”. DRAWER ROD IS IN PLACE; METAL FILING CLIP INSIDE DRAWER AT BACK. .30 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL READS “PLAY ANALYTICS”. DRAWER ROD IS IN PLACE; METAL FILING CLIP INSIDE DRAWER AT BACK. .31 - FULL OF CATALOGUE CARDS WITH TYPED AND HANDWRITTEN NOTES ON BOTH SIDES. HANDWRITTEN DRAWER LABEL READS “PLAY ANALYTICS”. DRAWER ROD IS IN PLACE; METAL FILING CLIP INSIDE DRAWER AT BACK.
Subjects
FURNITURE
DATA PROCESSING T&E
Historical Association
EDUCATION
FURNISHINGS
History
THIS CARD CATALOGUE WAS PRODUCED AND USED BY STAFF AT THE LETHBRIDGE PUBLIC LIBRARY. ON MAY 1, 2015 COLLECTIONS TECHNICIAN KEVIN MACLEAN INTERVIEWED LINDA MCELRAVY, WHO WORKED AT THE LIBRARY’S MAIN BRANCH STARTING IN 1978, RETIRING FROM HER POSITION AS ASSOCIATE DIRECTOR OF PUBLIC SERVICES IN 2008. MCELRAVY EXPLAINED THE CATALOGUING PROCESS AND SUGGESTED THAT IT MAY HAVE BEEN HOUSED IN THE LIBRARY’S SENATOR BUCHANAN ROOM (A REFERENCE RESOURCE OF LOCAL HISTORIES AND GENEALOGIES) AT ONE TIME. MCELRAVY SAID: “WE USED [CARD CATALOGUES] PRIOR TO AUTOMATING OUR CATALOGUE WHICH WOULD HAVE BEEN IN THE EARLY ‘80S… THERE ARE AT LEAST THREE INDEXES [INSIDE THIS SPECIFIC CATALOGUE]… WE USED TO CREATE CARD INDEXES FOR COLLECTIONS AND THINGS THAT YOU COULDN’T FIND… THROUGH NORMAL CATALOGUING PROCESSES. SO, THE FIRST ONE IS… THE SONG INDEX AND THAT WAS MADE UP OF ANALYTICS OF SHEET MUSIC MAGAZINE AND COLLECTIONS AND SONGS – ALL MUSIC AS OPPOSED TO JUST THE LYRICS. SO WE WOULD TAKE COLLECTIONS OF SONGS IN OUR LIBRARY COLLECTION, WE DIDN’T USE ANYTHING THAT WAS NOT AVAILABLE AT THE LETHBRIDGE PUBLIC LIBRARY – SO IT WASN’T A GENERAL THING IT WAS SPECIFIC, A SPECIFIC TOOL TO OUR COLLECTION… IF SOMEONE WANTED A PARTICULAR PIECE OF MUSIC… WE WOULD BE ABLE TO FIND THAT HERE RATHER THAN PEOPLE STANDING AT THE SHELF, LEAFING THROUGH ALL OF THAT… [AT] THE OTHER END OF THE BANK OF CARDS IS THE PLAY INDEX AND THAT’S THE SAME IDEA – THERE WOULD BE ‘AUTHOR’, ‘PLAYWRIGHT’ AND ‘TITLE’ CARDS PUT IN FOR EACH OF THE PLAYS IN COLLECTIONS THAT WE HAD AT LPL. AND THE MIDDLE ONE WAS THE INDEX TO THE LETHBRIDGE HERALD – I THINK SOME OF IT GOES BACK TO ’99 AND BEFORE AND FOR THAT ONE THE STAFF WOULD CUT OUT ARTICLES FROM THE LETHBRIDGE HERALD AND THEN THEY WOULD PUT SUBJECT HEADINGS ON THEM AND MAKE A CORRESPONDING CARD FOR THE CATALOGUE SO THAT THAT WOULD GIVE PEOPLE ACCESS TO THAT [FILE]...” MCELRAVY CONTINUED: “I THINK [THE AUTOMATION OF THE LIBRARY CATALOGUE] WAS IN THE MID ‘80S… [AFTER THAT PROCESS] I’M NOT SURE HOW OFTEN THEY USED [THE CARD CATALOGUES] ANYMORE… PERHAPS IT WAS JUST A QUESTION OF HANGING ON TO IT FOR THE SAKE OF HANGING ON TO IT.. I DON’T SUPPOSE REALLY FOR TOO LONG AFTER THAT IT WOULD [HAVE BEEN] USEFUL… [THE CARD CATALOGUE] REPRESENTS A LOT OF WORK… IT WAS EXPENSIVE TIME-WISE, IT WAS EXPENSIVE MATERIALS-WISE AND IT WAS EXPENSIVE SPACE-WISE… EVEN WITH THE DIGITIZED, AUTOMATED CATALOGUE, THOSE GENERIC ENTRIES DIDN’T NECESSARILY HAVE ANALYTICS… SO THAT’S WHY WE CONTINUED WITH THIS FOR A WHILE AND THEN EVENTUALLY IT JUST SEEMED TO BE NOT WORTH THE EFFORT TO DO IT… IT JUST SEEMED SAD TO ME THAT IT WAS ALMOST LIKE IT WASN’T RECOGNIZED BECAUSE IT WAS TOO OLD – IT HAD HAD ITS DAY BUT THERE’S NO PURPOSE FOR IT ANYMORE… I THINK THAT THIS CERTAINLY SERVED ITS PURPOSE FOR ITS TIME AND IT’S PART OF THE CONTEXT OF THE PERIOD… I OFTEN THINK TODAY WITH INTERNET AND WITH ALL THE ONLINE ACCESS THAT PEOPLE HAVE TO INFORMATION… WHEN YOU HAVE A QUESTION WHAT DO PEOPLE DO NOW? THEY PULL OUT THEIR PHONE, AND THEY GOOGLE, AND THEY GET THE ANSWER. WHEREAS, BEFORE ANY OF THIS HAPPENED THAT WAS WHAT THE LIBRARY DID, THAT WAS THE ROLE OF THE REFERENCE DEPARTMENT. THE LIBRARY IS THERE NOT JUST TO PROVIDE RECREATIONAL READING BUT TO PROVIDE INFORMATION. I’M NOT SAYING THEY’RE NOT DOING THAT ANYMORE, THEY ARE, IN A VERY MUCH MORE SOPHISTICATED WAY BUT THIS WAS ONE OF THE WAYS THAT WE HANDLED THE NEED TO PROVIDE INFORMATION TO PEOPLE.” THE FOLLOWING BRIEF HISTORY OF THE LETHBRIDGE PUBLIC LIBRARY WAS DEVELOPED WITH INFORMATION FROM THE LIBRARY’S WEBSITE. IN 1911 A CITY BYLAW WAS PASSED FOR THE PROVISION OF A LOCAL LIBRARY TO BE ESTABLISHED, AND EIGHT YEARS LATER LETHBRIDGE’S FIRST LIBRARY SERVICE WAS OPERATED OUT OF TWO ROOMS IN THE YMCA BUILDING. IN 1922, THE CARNEGIE LIBRARY BUILDING IN GALT GARDENS OPENED, WITH AN EXTENSION ADDED IN 1951. IN 1956 A NORTH BRANCH WAS OPENED, AND A SOUTH BRANCH FOLLOWED IN 1974. THE LETHBRIDGE PUBLIC LIBRARY MAIN BRANCH ON STAFFORD DRIVE SOUTH WAS COMPLETED IN 1974, WITH AN EXTENSION AND THE ESTABLISHMENT OF THE CHINOOK ARCH REGIONAL LIBRARY SYSTEM IN 1992. IN 1989 THE LIBRARY ADOPTED THE DYNIX AUTOMATED CATALOGUE SYSTEM, AND IN 1997 INTRODUCED PUBLIC INTERNET ACCESS COMPUTERS. IN 2010, THE CROSSINGS BRANCH OPENED IN WEST LETHBRIDGE. SEE PERMANENT FILE FOR HARDCOPIES OF FULL INTERVIEW TRANSCRIPT AND ONLINE SOURCE MATERIAL.
Catalogue Number
P20140025001
Acquisition Date
2014-07
Collection
Museum
Images
Less detail