Skip header and navigation

5 records – page 1 of 1.

Other Name
BLANKET
Date Range From
1920
Date Range To
1990
Material Type
Artifact
Materials
RAW FLAX YARN
Catalogue Number
P20160003007
  2 images  
Material Type
Artifact
Other Name
BLANKET
Date Range From
1920
Date Range To
1990
Materials
RAW FLAX YARN
No. Pieces
1
Length
139
Width
99.5
Description
HAND-WOVEN BLANKET MADE FROM RAW FLAX. THE BLANKET IS COMPOSED OF 2 SECTIONS OF THE SAME SIZE OF MATERIAL THAT ARE JOINED TOGETHER WITH A SEAM AT THE CENTER. ON THE FRONT SIDE (WITH NEAT SIDE OF THE STITCHING AND PATCHES), THERE ARE THREE PATCHES ON THE BLANKET MADE FROM LIGHTER, RAW-COLOURED MATERIAL. ONE SECTION OF THE FABRIC HAS TWO OF THE PATCHES ALIGNED VERTICALLY NEAR THE CENTER SEAM. THE AREA SHOWING ON ONE PATCH IS 3 CM X 5 CM AND THE OTHER IS SHOWING 5 CM X 6 CM. ON THE OPPOSITE SECTION THERE IS ONE PATCH THAT IS 16 CM X 8.5 CM SEWN AT THE EDGE OF THE BLANKET. THE BLANKET IS HEMMED ON BOTH SHORT SIDES. ON THE OPPOSING/BACK SIDE OF THE BLANKET, THE FULL PIECES OF THE FABRIC FOR THE PATCHES ARE SHOWING. THE SMALLER PATCH OF THE TWO ON THE ONE HALF-SECTION OF THE BLANKET IS 8CM X 10 CM AND THE OTHER PATCH ON THAT SIDE IS 14CM X 15CM. THE PATCH ON THE OTHER HALF-SECTION IS THE SAME SIZE AS WHEN VIEWED FROM THE FRONT. THERE IS A SEVERELY FADED BLUE STAMP ON THIS PATCH’S FABRIC. FAIR CONDITION. THERE IS RED STAINING THAT CAN BE SEEN FROM BOTH SIDES OF THE BLANKET AT THE CENTER SEAM, NEAR THE EDGE OF THE BLANKET AT THE SIDE WITH 2 PATCHES (CLOSER TO THE LARGER PATCH), AND NEAR THE SMALL PATCH AT THE END FURTHER FROM THE CENTER. THERE IS A HOLE WITH MANY LOOSE THREADS SURROUNDING NEAR THE CENTER OF THE HALF SECTION WITH ONE PATCH. THERE ARE VARIOUS THREADS COMING LOOSE AT MULTIPLE POINTS OF THE BLANKET.
Subjects
AGRICULTURAL T&E
BEDDING
Historical Association
AGRICULTURE
DOMESTIC
ETHNOGRAPHIC
History
THE KONKINS WERE A RUSSIAN-SPEAKING FAMILY FROM THE TOWN OF SHOULDICE, ALBERTA, NEAR CALGARY. THEY AND MANY OTHER RUSSIAN FAMILIES COMPOSED THAT TOWN’S DOUKHOBOR COLONY. IT WAS THERE WILLIAM KONKIN MARRIED ELIZABETH WISHLOW. IN 1928, THEIR DAUGHTER, ELSIE WAS BORN. THEY LATER MOVED TO A FARM IN VAUXHALL, ALBERTA. THE PRECEDING AND FOLLOWING INFORMATION HAS BEEN EXTRACTED FROM A TWO-PART INTERVIEW WITH DONOR ELSIE MORRIS, WHICH WAS CONDUCTED BY COLLECTIONS TECHNICIAN KEVIN MACLEAN ON FEBRUARY 17, 2016. ADDITIONAL INFORMATION COMES FROM FAMILY HISTORIES AND TEXTS PROVIDED BY THE DONOR. A FULL HISTORY OF THE KONKIN FAMILY CAN BE FOUND WITH THE RECORD P20160003001. ACCORDING TO A NOTE THAT WAS ATTACHED TO THIS LIGHTWEIGHT BLANKET AT THE TIME OF ACQUISITION THE BLANKET IS BELIEVED TO HAVE BEEN MADE C. 1920S. MORRIS SAYS HER MEMORY OF THE BLANKET DATES AS FAR BACK AS SHE CAN REMEMBER: “RIGHT INTO THE ‘30S, ‘40S AND ‘50S BECAUSE MY MOTHER DID THAT RIGHT UP UNTIL NEAR THE END. I USE THAT EVEN IN LETHBRIDGE WHEN I HAD A GARDEN. [THIS TYPE OF BLANKET] WAS USED FOR TWO PURPOSES. IT WAS EITHER PUT ON THE BED UNDERNEATH THE MATTRESS THE LADIES MADE OUT OF WOOL AND OR ELSE IT WAS USED, A DIFFERENT PIECE OF CLOTH WOULD BE USED FOR FLAILING THINGS. [THE] FLAIL ACTUALLY GOES WITH IT AND THEY BANG ON THE SEEDS AND IT WOULD TAKE THE HULLS OFF… IT’S HAND WOVEN AND IT’S MADE OUT OF POOR QUALITY FLAX… IT’S UNBLEACHED, DEFINITELY… RAW LINEN." THIS SPECIFIC BLANKET WAS USED FOR SEEDS MORRIS RECALLS: “…IT HAD TO BE A WINDY DAY… WE WOULD PICK DRIED PEAS OR BEANS OR WHATEVER BEET SEEDS AND WE WOULD BEAT AWAY AND THEN WE WOULD STAND UP, HOLD IT UP AND THE BREEZE WOULD BLOW THE HULLS OFF AND THE SEEDS WOULD GO STRAIGHT DOWN [ONTO THE BLANKET.” THE SEEDS WOULD THEN BE CARRIED ON THE BLANKET AND THEN PUT INTO A PAIL. OF THE BLANKET’S CLEAN STATE, MORRIS EXPLAINS, “THEY’RE ALWAYS WASHED AFTER THEY’RE FINISHED USING THEM.” WHEN SHE LOOKS AT THIS ARTIFACT, MORRIS SAYS: “I FEEL LIKE I’M OUT ON THE FARM, I SEE FIELDS AND FIELDS OF FLAX, BLUE FLAX. BUT THAT’S NOT WHAT SHE USED IT FOR. SHE DID USE IT IF SHE WANTED A LITTLE BIT OF THE FLAX THEN SHE’D POUND THE FLAX, BUT THAT WASN’T OFTEN. IT WAS MOSTLY BEANS AND PEAS.” IT IS UNKNOWN WHO WOVE THIS BLANKET. PLEASE SEE THE PERMANENT FILE FOR MORE INFORMATION INCLUDING FULL INTERVIEW TRANSCRIPTION, OBITUARIES, PHOTOGRAPHS, AND FAMILY HISTORIES.
Catalogue Number
P20160003007
Acquisition Date
2016-02
Collection
Museum
Images
Less detail
Other Name
FLAIL PADDLE
Date Range From
1920
Date Range To
1990
Material Type
Artifact
Materials
WOOD
Catalogue Number
P20160003001
  1 image  
Material Type
Artifact
Other Name
FLAIL PADDLE
Date Range From
1920
Date Range To
1990
Materials
WOOD
No. Pieces
1
Height
4
Length
41
Width
12
Description
WOODEN FLAIL. ONE END HAS A PADDLE WITH A WIDTH THAT TAPERS FROM 12 CM AT THE TOP TO 10 CM AT THE BASE. THE PADDLE IS WELL WORN IN THE CENTER WITH A HEIGHT OF 4 CM AT THE ENDS AND 2 CM IN THE CENTER. HANDLE IS ATTACHED TO THE PADDLE AND IS 16 CM LONG WITH A CIRCULAR SHAPE AT THE END OF THE HANDLE. ENGRAVED ON THE CIRCLE THE INITIALS OF DONOR’S MATERNAL GRANDMOTHER, ELIZABETH EVANAVNA WISHLOW, “ . . .” GOOD CONDITION. THERE IS SLIGHT SPLITTING OF THE WOOD ON THE PADDLE AND AROUND THE JOINT BETWEEN THE HANDLE AND THE PADDLE. OVERALL WEAR FROM USE.
Subjects
AGRICULTURAL T&E
Historical Association
AGRICULTURE
ETHNOGRAPHIC
History
THE FOLLOWING INFORMATION HAS BEEN EXTRACTED FROM A TWO-PART INTERVIEW WITH DONOR ELSIE MORRIS, WHICH WAS CONDUCTED BY COLLECTIONS TECHNICIAN KEVIN MACLEAN ON FEBRUARY 17, 2016. ADDITIONAL INFORMATION COMES FROM FAMILY HISTORIES AND TEXTS PROVIDED BY THE DONOR. THIS WOODEN DOUKHOBOR TOOL IS CALLED A “FLAIL.” A NOTE WRITTEN BY ELSIE MORRIS THAT WAS ATTACHED TO THE FLAIL AT THE TIME OF DONATION EXPLAINS, “FLAIL USED FOR BEATING OUT SEEDS. BELONGED TO ELIZABETH EVANAVNA WISHLOW, THEN HANDED TO HER DAUGHTER ELIZABETH PETROVNA KONKIN WHO PASSED IT ON TO HER DAUGHTER ELIZABETH W. MORRIS.” ALTERNATELY, IN THE INTERVIEW, MORRIS REMEMBERED HER GRANDMOTHER’S, “… NAME WAS JUSOULNA AND THE MIDDLE INITIAL IS THE DAUGHTER OF YVONNE. YVONNE WAS HER FATHER’S NAME AND WISHLOW WAS HER LAST NAME.” THE FLAIL AND THE BLANKET, ALSO DONATED BY MORRIS, WERE USED TOGETHER AT HARVEST TIME TO EXTRACT AND COLLECT SEEDS FROM GARDEN CROPS. ELSIE RECALLED THAT ON WINDY DAYS, “WE WOULD PICK DRIED PEAS OR BEANS, OR WHATEVER, AND WE WOULD [LAY THEM OUT ON THE BLANKET], BEAT AWAY AND THEN HOLD [THE BLANKET] UP, AND THE BREEZE WOULD BLOW THE HULLS OFF AND THE SEEDS WOULD GO STRAIGHT DOWN.” THE FLAIL CONTINUED TO BE USED BY ELIZABETH “RIGHT UP TO THE END,” POSSIBLY INTO THE 1990S, AND THEREAFTER BY MORRIS. WHEN ASKED WHY SHE STOPPED USING IT HERSELF, MORRIS SAID, “I DON’T GARDEN ANYMORE. FURTHERMORE, PEAS ARE SO INEXPENSIVE THAT YOU DON’T WANT TO GO TO ALL THAT WORK... I DON’T KNOW HOW MANY PEOPLE HARVEST THEIR SEEDS. I THINK WE JUST GO AND BUY THEM IN PACKETS NOW.” THE KONKINS WERE A RUSSIAN-SPEAKING FAMILY FROM THE TOWN OF SHOULDICE, ALBERTA, NEAR CALGARY. THEY AND MANY OTHER RUSSIAN FAMILIES COMPOSED THAT TOWN’S DOUKHOBOR COLONY. DOUKHOBOURS CAME TO CANADA IN FINAL YEARS OF THE 19TH CENTURY TO ESCAPE RELIGIOUS PERSECUTION IN RUSSIA. ELIZABETH KONKIN (NEE WISHLOW) WAS BORN IN CANORA, SK ON JANUARY 22, 1907 TO HER PARENTS, PETER AND ELIZABETH WISHLOW. AT THE AGE OF 6 SHE MOVED WITH HER FAMILY TO A DOUKHOBOR SETTLEMENT AT BRILLIANT, BC, AND THEY LATER MOVED TO THE DOUKHOBOR SETTLEMENT AT SHOULDICE. IT WAS HERE THAT SHE MET AND MARRIED WILLIAM KONKIN. THEIR DAUGHTER, ELSIE MORRIS (NÉE KONKIN), WAS BORN IN SHOULDICE IN 1928. INITIALLY, WILLIAM TRIED TO SUPPORT HIS FAMILY BY GROWING AND PEDDLING VEGETABLES. WHEN THE FAMILY RECOGNIZED THAT GARDENING WOULD NOT PROVIDE THEM WITH THE INCOME THEY NEEDED, WILLIAM VENTURED OUT TO FARM A QUARTER SECTION OF IRRIGATED LAND 120 KM (75 MILES) AWAY IN VAUXHALL. IN 1941, AFTER THREE YEARS OF FARMING REMOTELY, HE AND ELIZABETH DECIDED TO LEAVE THE ALBERTA COLONY AND RELOCATE TO VAUXHALL. MORRIS WAS 12 YEARS OLD AT THE TIME. MORRIS STATED: “… [T]HEY LEFT THE COLONY BECAUSE THERE WERE THINGS GOING ON THAT THEY DID NOT LIKE SO THEY WANTED TO FARM ON THEIR OWN. SO NOW NOBODY HAD MONEY, SO VAUXHALL HAD LAND, YOU KNOW, THAT THEY WANTED TO HAVE THE PEOPLE AND THEY DIDN’T HAVE TO PUT ANY DOWN DEPOSIT THEY JUST WERE GIVEN THE LAND AND THEY HAD TO SIGN A PAPER SAYING THEY WOULD GIVE THEM ONE FOURTH OF THE CROP EVERY YEAR. THAT WAS HOW MY DAD GOT PAID BUT WHAT MY DAD DIDN’T KNOW WAS THAT THE MONEY THAT WENT IN THERE WAS ACTUALLY PAYING OFF THE FARM SO HE WENT TO SEE MR., WHAT WAS HIS LAST NAME, HE WAS THE PERSON IN CHARGE. ANYWAY HE SAID TO HIM “HOW LONG WILL IT BE BEFORE I CAN PAY OFF THIS FARM” AND HE SAYS “YOU’VE BEEN PAYING IT RIGHT ALONG YOU OWE ABOUT TWO HUNDRED AND A FEW DOLLARS”. WELL THAT WAS A REAL SURPRISE FOR THEM SO THEY GAVE THEM THE TWO HUNDRED AND WHATEVER IT WAS THAT HE OWED AND HE BECAME THE OWNER OF THE FARM." MORRIS WENT ON, ”THE DOUKHOBORS ARE AGRARIAN, THEY LIKE TO GROW THINGS THAT’S THEIR CULTURE OF OCCUPATION AND SO THE ONES WHO LIKED FRUIT MOVED TO B.C. LIKE MY UNCLE DID AND MY DAD LIKED FARMING SO HE MOVED TO VAUXHALL AND THERE WERE LET’S SEE, I THINK THERE WERE FOUR OTHER FAMILIES THAT MOVED TO VAUXHALL AND THREE OF THE MEN GOT TOGETHER AND DECIDED THEY WERE GOING TO GET THEIR TOOLS TOGETHER LIKE A TRACTOR AND MACHINERY THEY NEEDED AND THEN THEY WOULD TAKE TURNS…” THE KONKINS RETIRED TO LETHBRIDGE FROM VAUXHALL IN 1968. MORRIS, BY THEN A SCHOOL TEACHER, RELOCATED TO LETHBRIDGE WITH HER OWN FAMILY. WILLIAM KONKIN PASSED AWAY IN LETHBRIDGE ON MARCH 3, 1977 AT THE AGE OF 72 AND 23 YEARS LATER, ON APRIL 8, 2000, ELIZABETH KONKIN PASSED AWAY IN LETHBRIDGE. A NUMBER OF ARTIFACTS PREVIOUSLY BELONGING TO THE FAMILY EXIST IN THE GALT COLLECTION. THE KONKINS RETIRED TO LETHBRIDGE FROM VAUXHALL IN 1968. MORRIS, BY THEN A SCHOOL TEACHER, RELOCATED TO LETHBRIDGE WITH HER OWN FAMILY. WILLIAM KONKIN PASSED AWAY IN LETHBRIDGE ON MARCH 3, 1977 AT THE AGE OF 72 AND 23 YEARS LATER, ON APRIL 8, 2000, ELIZABETH KONKIN PASSED AWAY IN LETHBRIDGE. A NUMBER OF ARTIFACTS PREVIOUSLY BELONGING TO THE FAMILY EXIST IN THE GALT COLLECTION. PLEASE SEE THE PERMANENT FILE FOR MORE INFORMATION INCLUDING FULL INTERVIEW TRANSCRIPTION, OBITUARIES, PHOTOGRAPHS, AND FAMILY HISTORIES.
Catalogue Number
P20160003001
Acquisition Date
2016-02
Collection
Museum
Images
Less detail
Other Name
SELF-CONTAINED BREATHING APPARATUS TRAINING BACKPACK
Date Range From
1995
Date Range To
2005
Material Type
Artifact
Materials
CANVAS, NYLON, METAL
Catalogue Number
P20150010018
  2 images  
Material Type
Artifact
Other Name
SELF-CONTAINED BREATHING APPARATUS TRAINING BACKPACK
Date Range From
1995
Date Range To
2005
Materials
CANVAS, NYLON, METAL
No. Pieces
1
Height
58.2
Length
35.0
Width
133.2
Description
SELF-CONTAINED BREATHING APPARATUS TRAINING BACKPACK. STEEL AIR TANK, PAINTED MEDIUM GREY, WITH DARK YELLOW CANVAS SHOULDER STRAPS, AND GREEN NYLON WAIST STRAP. MEDIUM GREY STEEL AIR BOTTLE, HELD TO THE HARNESS ASSEMBLY BY A SILVER COLOURED METAL BRACKET. THIS BRACKET HAS A LARGE YELLOW WITH GREEN WRITING STICKER: "MSA AIRMASK MODEL 401". HARNESS ASSEMBLY IS ALSO MEDIUM GREY METAL AND IS ROUGHLY RECTANGULAR IN SHAPE. AT THE TOP OF THE RECTANGLE IS A CIRCLE, WHICH IS WHERE THE YELLOW SHOULDER STRAPS ARE AFFIXED WITH BLACK AND SILVER COLOURED RIVETS TO THE HARNESS ASSEMBLY. YELLOW STRAPS ARE PADDED AND EACH STRAP HAS A SQUARE OF THE LOOP SIDE OF VELCRO AT THE BOTTOMS. THE YELLOW STRAPS ATTACH TO THE RIGID WAIST SUPPORT WITH BLACK NYLON STRAPS. THE ENDS OF THE BLACK STRAPS HAVE A RECTANGULAR PIECE OF THE HOOK SIDE OF VELCRO AND THE VERY ENDS ARE FINISHED WITH A SEMI-CIRCULAR PIECE OF SILVER METAL. THE RIGID WAIST SUPPORT IS PADDED WITH BLACK FABRIC. THE GREEN WAIST STRAPS ARE AFFIXED TO THE RIGID METAL SUPPORT WITH TWO BLACK RIVETS EACH. THE WAIST STRAP CLOSES WITH A SEAT BELT STYLE BUCKLE. THE BUCKLE IS ON THE WEARER'S RIGHT SIDE AND IS STAMPED ON THE REVERSE WITH: "UIO BUCKLE WEAR BELT SNUG. REPLACE IF DAMAGED OR FRAYED." BOTTOM OF AIR BOTTLE IS STAMPED WITH "DOT-3A A2015. D136587 MSA". THE STAMP CONTINUES UNDER THE HARNESS, BUT IS NOT READABLE. PRESSURE GAUGE AND REGULATOR ALSO ON THIS END OF THE BOTTLE. OVERALL IN GOOD CONDITION. BOTTLE APPEARS TO HAVE BEEN YELLOW AND THEN PAINTED GREY. GREY PAINT HAS SCRATCHED OFF ALL OVER THE AIR BOTTLE, REVEALING THE YELLOW SURFACE BELOW. ALL FABRIC STRAPS ARE IN GOOD CONDITION, WITH NO VISIBLE TEARS OR RIPS. YELLOW STRAPS ARE DISCOLOURED.
Subjects
MINING & MINERAL HARVESTING T&E
Historical Association
SAFETY SERVICES
History
THIS SELF-CONTAINED BREATHING APPARATUS TRAINING BACKPACK WAS USED BY THE LETHBRIDGE FIRE DEPARTMENT. IN A WRITTEN STATEMENT PROVIDED AT THE TIME OF DONATION, JESSE KURTZ, DEPUTY CHIEF – SUPPORT SERVICES (RETIRED), EXPLAINED THAT THE “THIS IS JUST A HARNESS FOR TRAINING PURPOSES WITH A STEEL AIR CYLINDER. IT SIMULATES THE ACTUAL WEIGHT AND FEEL OF A REAL SETUP. [IT WAS] ‘HOME BUILT’ FOR TRAINING PURPOSES.” IN THE SUMMER OF 2015, COLLECTIONS TECHNICIAN KEVIN MACLEAN CONDUCTED A SERIES OF INTERVIEWS WITH CURRENT AND FORMER MEMBERS OF THE FIRE DEPARTMENT, INCLUDING TREVOR LAZENBY (HIRED IN 1994). HE RECALLED: “I DON’T THINK I EVER WORN ONE OF THESE AT AN ACTUAL FIRE. I THINK I’VE ONLY EVER WORN THE NEXT GENERATION FIBERGLASS-WRAP … WE HAD THE FIBERGLASS ONES IN FRONTLINE SERVICE WHEN I STARTED, SO THIS WOULD BE PRE-1994, IF I’M NOT MISTAKEN. I DON’T THINK WE HAD THESE ON THE TRUCKS IN ’94. THEY WERE AROUND AND THEY WERE BACKUPS, BUT THEY WEREN’T FRONTLINE … WE KEPT ONE OR TWO AT THE NORTHSIDE FIRE HALL AND AT THE WESTSIDE FIRE HALL BECAUSE WHEN GUYS AT LUNCHTIME HAVE A WORKOUT, OR AFTER WORK, THEY’LL HAVE A WORKOUT AND THEY’LL ACTUALLY PUT THE OLD HEAVY STEEL BOTTLE ON AND THEY’LL CLIMB THE STAIRS – SO IT’S USED TO WORK OUT AND NOTHING ELSE. VERY, VERY UNCOMFORTABLE. VERY HEAVY DESIGN.” SEE PERMANENT FILE FOR FULL INTERVIEW TRANSCRIPTS AND ADDITIONAL INFORMATION ABOUT THE LETHBRIDGE FIRE DEPARTMENT.
Catalogue Number
P20150010018
Acquisition Date
2015-02
Collection
Museum
Images
Less detail
Other Name
SELF-CONTAINED BREATHING APPARATUS / AIR MASK AND HARNESS
Date Range From
1975
Date Range To
2000
Material Type
Artifact
Materials
PLASTIC, METAL, COTTON
Catalogue Number
P20150010017
  2 images  
Material Type
Artifact
Other Name
SELF-CONTAINED BREATHING APPARATUS / AIR MASK AND HARNESS
Date Range From
1975
Date Range To
2000
Materials
PLASTIC, METAL, COTTON
No. Pieces
5
Height
29.2
Length
68.8
Width
50.7
Description
SELF-CONTAINED BREATHING APPARATUS, INCLUDES CASE, HARNESS ASSEMBLY, MASK WITH STRAP, AND PAPER PASS CERTIFICATE. .A: CASE. BLACK MOULDED, TEXTURED PLASTIC CASE. ROUGHLY RECTANGULAR SHAPED. HINGED AT THE BACK, CASE HAS THREE HANDLES ON THE FRONT: ONE IS IN THE CENTRE OF THE CASE, WITH THE OTHER TWO ARE ON THE CORNERS OF THE BOX. THERE ARE TWO PLASTIC LATCHES BETWEEN THE THREE HANDLES. BLACK AND SILVER COLOURED STICKER ON THE TOP OF THE BOX READS: "MSA AIRMASK". A SECOND BLACK AND SILVER STICKER, ABOVE ONE OF THE LATCHES, READS: "ULTRALITE PRESSURE DEMAND" AND ALSO HAS "PASS IN BOX" HANDWRITTEN IN BLACKMARKER. A THIRD BLACK AND SILVER STICKER THAT READS "MSA AIRMASK" IS ON THE BOTTOM OF THE BOX. YELLOW PIECE OF DUCT TAPE ON RIGHT SIDE, HANDWRITTEN IN BLACK INK: "ULTRALITE BMR". INSIDE THE BOX IS SUBDIVIDED INTO COMPARTMENTS. AFFIXED TO THE INSIDE TOP OF THE LID IS A PAGE OF INSTRUCTIONS TITLED "MSA AIR MASK, PRESSURE DEMAND TYPE". A SMALL PIECE OF PAPER AFIXED TO THE INSIDE OF THE LID IS TITLED "PACKING ARRANGEMENT" AND HAS AN ILLUSTRATION OF HOW THE UNIT SHOULD BE PACKED AWAY. DIMENSIONS PROVIDED ABOVE CORRESPOND TO THIS CASE. OVERALL IN FAIR TO GOOD CONDITION. THE TWO "MSA AIRMASK" STICKERS HAVE PARTIALLY PEELED AWAY, WITH THE TOP STICKER MISSING THE BOTTOM OF "ASK" IN "MASK" AND WITH THE BOTTOM STICKER MISSING PARTS OF THE "MSA": THE "M" AND "A" ARE PARTIALLY MISSING, WHILE THE "S" IS ENTIRELY GONE; "MASK" OF THIS STICKER IS ALSO VERY DAMAGED. LATCH BELOW THE "ULTRALITE" STICKER IS IN GOOD CONDITION, WHILE THE OTHER IS PARTIALLY BROKEN. SEVERAL SCUFFS AND SCRATCHES IN THE PLASTIC, ESPECIALLY ALONG THE BOTTOM. .B: HARNESS ASSEMBLY. BLACK PLASTIC, METAL, AND FABRIC WITH SILVER COLOURED METAL. OUTER PORTION OF HARNESS DESIGNED TO HOLD BOTTLE OF COMPRESSED AIR. BLACK METAL BRACKET RUNS VERTICALLY UP AND DOWN THE HARNESS AND HAS A SILVER COLOURED CIRCULAR METAL BAND TO HOLD TANK IN PLACE. THE SILVER BAND IS 7.7CM WIDE AND HAS TWO BLACK STICKERS WITH “MSA” IN YELLOW STUCK ON. BOTTOM OF BLACK METAL BRACKET HAS A TRIANGULAR SHAPED PIECE, WITH A ROUND RUBBER TIP, TO HOLD THE BOTTOM OF THE AIR TANK IN PLACE. BELOW SILVER BAND IS A STICKER, WITH A DISCOLOURED WHITE BACKGROUND AND BLACK LETTERS GIVING INSTRUCTIONS FOR USE, ENTITLED: “CUSTOM 4500/ULTRALITE BELT MOUNTED SCBA. OPEN CIRCUIT, PRESSURE-DEMAND ENTRY AND ESCAPE SELF-CONTAINED BREATHING APPARATUS OR COMBINATION SELF-CONTAINED BREATHING APPARATUS AND TYPE C SUPPLIED AIR RESPIRATOR.” SILVER BAND FOR TANK HAS A HANDLE THAT EXPANDS AND CONTRACTS THE BAND, TO ALLOW FOR REMOVAL AND INSTALLATION OF AIR TANK. AT THE TOP OF THE BLACK METAL BRACKET, THERE IS A CIRCULAR SECTION WHICH ALLOWS FOR THE ATTACHMENT OF TWO BLACK PADDED FABRIC SHOULDER STRAPS. THESE STRAPS ARE BOLTED ON WITH BLACK AND SILVER COLOURED BOLTS. BLACK METAL BRACKET ATTACHES AT WAIST AREA TO BLACK MOULDED PIECE OF PLASTIC. BLACK MOULDED PLASTIC FITS AROUND THE HIP AREA OF THE WEARER. SHOULDER STRAPS COME DOWN FROM TOP OF METAL BRACKET AND ATTACH TO THIS BLACK PLASTIC JUST ABOVE THE HIP. SHOULDER STRAPS ARE PADDED AND HAVE A SECOND SMALLER STRAP, WHICH WOULD CROSS THE WEARER’S CHEST WITH A BLACK SIDE RELEASE PLASTIC BUCKLE, WITH THE FEMALE COMPONENT ON THE RIGHT STRAP. ON EACH STRAP BELOW THE PLASTIC BUCKLE IS A SILVER COLOURED “D” RING. ABOVE THE BUCKLE ON EACH STRAP IS A SILVER COLOURED SILK SCREEN SECTION WITH “MSA”. AT THE BOTTOM WAIST PORTION OF THE MOULDED PLASTIC IS ANOTHER BLACK FABRIC STRAP, TO GO AROUND THE WEARER’S WAIST. THE BELT ATTACHES WITH A SILVER COLOURED METAL LATCH PLATE ON THE RIGHT SIDE, WHICH FITS INTO A BLACK PLASTIC BUCKLE, WITH A BLACK PLASTIC BUTTON TO RELASE, ON THE WEARER’S LEFT SIDE. ATTACHED TO THE LEFT SIDE OF THE BELT IS A PRESSURE REGULATOR AND HIGH PRESSURE SUPPLY HOSE. THE PRESSURE REGULATOR CONSISTS OF BLACK METAL AND PLASTIC, AND GOLD AND RED COLOURED METAL. A CIRCULAR GOLD COLOURED METAL PIECE HAS REMNANTS OF TWO STICKERS ON ITS FACE: “MSA AIR MASK – MFD BY MINE SAFETY APPLIANCES COMPANY – PITTSBURGH, PENNSYLVANIA – PRESSURE DEMAND.” BELOW IT IS A HOSE COUPLING. THIS COUPLING HAS A BLACK RUBBER CAP, EMBOSSED WITH “FHR”. BESIDE THIS IS AN AIR PRESSURE GAUGE: BLACK METAL TEXTURED EDGE, GLASS FACE, AND RUBBER ENCASING. THE FACE OF THE GAUGE IS OFF-WHITE WITH A DIAL INCRESING IN INCREMENTS OF 5 (5, 10, 15, 20, 25, 30), WITH A RED SECTION FROM 0-5, A YELLOW SECTION BETWEEN 20 AND 25, AND A GREY SECTION AT 30. BELOW THE DIAL IS “PSI X 100 – USE NO OIL – MSA 18” BESIDE THE GAUGE IS A RED COLOURED METAL KNOB, WITH “ß OPEN – BY PASS” EMBOSSED ON FRONT FACE. BESIDE THIS RED KNOB IS A GOLD COLOURED KNOB WITH A SILVER COLOURED TAB “^PUSH^”. ON THE FACE OF THE GOLD KNOB, EMBOSSED, IS “MAIN LINE ^” WITH “MSA” IN CENTRE. OPPOSITIE THE PRESSURE GAUGE IS A HIGH PRESSURE SUPPLY HOSE. THE HOSE IS BLACK PLASTIC AND FABRIC. ON THE END OF THIS HOSE IS A SILVER COLOURED BELL, USED AS A LOW AIR ALARM. AT THE VERY END OF THE HOSE IS A BLACK TEXTURED METAL COUPLING. .C: MASK WITH HOSE. BLACK PLASTIC RESPIRATOR MASK WITH CLEAR PLASTIC VISOR. FITTED NOSE PIECE WITH TWO SMALL CIRCLES ON EITHER SIDE OF BRIDGE OF NOSE PIECE. EACH CIRCLE HAS BLACK PLASTIC SPOKES AND A TRANSPARENT FLAP, WHICH IS ON THE INSIDE OF THE NOSE PIECE. HANDWRITTEN IN GOLD COLOURED INK, ON THE INSIDE OF NOSE PIECE, “G29C” OR “929C”. FRONT OF NOSE PIECE, VISIBLE THROUGH THE VISOR, HAS “MEDIUM” EMBOSSED ONTO MASK. FIVE BLACK PLASTIC STRAPS WITH SILVER COLOURED BUCKLES ALLOW MASK TO BE SECURELY TIGHTENED ONTO THE HEAD. STRAPS MEET AT A ROUGHLY STAR-SHAPED PIECE THAT SITS AT THE BACK OF THE HEAD. THIS STAR-SHAPED PIECE HAS THE FOLLOWING EMBOSSED ONTO THE PLASTIC: “M2 C5 – MSA – PULL FRONT STRAP LAST – U”. ABOVE THE “M2 C5” IS AN EMBOSSED MULTI-SPOKED CIRCLE. EMBOSSED IN THE CENTRE OF THE CIRCLE: “93 – 94 – 95” EACH OF THE FIVE STRAPS ARE LABELLED; TWO AT THE BASE OF MASK, EACH LABELLED “NECK”, NEXT TWO UP ARE “SIDE”, AND THE FIFTH STRAP AT THE TOP OF THE MASK IS “FRONT”. ON FRONT OF MASK, AT THE MOUTH AREA, IS A LONG ACCORDION-STYLE HOSE. IT IS ATTACHED TO THE MASK WITH A SILVER COLOURED METAL CLAMP. ON THE NUT OF THIS CLAMP IS WRITTEN “ALL STAINLESS BREEZE”. BELOW IS A BLACK METAL BAND, WHICH IS STAMPED IN YELLOW WITH “-18 TINNERMAN”. BELOW THAT THERE IS A SILVER COLOURED METAL RING, WHICH HAS A BLACK FABRIC STRAP ATTACHED (SEE BELOW FOR DESCRIPTION OF THIS ITEM, P20150010017D). THE BOTTOM OF THE HOSE HAS A BLACK METAL BAND AND THEN A SILVER COLOURED, TEXTURED METAL PIECE TO CONNECT TO THE AIR SUPPLY CANISTER. BELOW THE HOSE CONNECTION, AT THE CHIN AREA OF THE MASK, IS A MEDIUM-LIGHT GREY CIRCLE, EMBOSSED WITH “MSA – U.S. PAT. 4,007,758”. TO THE RIGHT OF THE HOSE ATTACHEMENT HANDWRITTEN IN GREEN INK IS “#4”. ON THE RIGHT SIDE OF THE MASK, BETWEEN THE “NECK” AND “SIDE” STRAPS IS A FAINT STAMP IN YELLOW “7-212-“. EMBOSSED IN CENTRE OF MASK, ABOVE FACE VISOR, IS “MSA” IN A CIRCLE. INSIDE OF THE HOSE ATTACHMENT, BELOW THE MOULDED NOSE AREA, IS A BLACK DISK WITH HOLES IN IT. VISIBLE THROUGH THESE HOLES IS A PIECE OF GOLD-COLOURED METAL. DIMENSIONS OF MASK: HOSE IS 83.5CM LONG; VISOR IS 18CM WIDE. .D: STRAP ON MASK. BLACK FABRIC STRAP, WITH TWO BLACK SNAPS. SNAPS ONTO SILVER-COLOURED METAL RING AROUND THE HOSE. STRAP IS 92.5CM LONG AND 1.9CM WIDE. OVERALL CONDITION OF B, C, D: WELL WORN. ALL STICKERS SHOW SIGNS OF WEAR: DISCOLOURATION AND FINISH OF STICKERS SCRATCHED. STRUCTRUALLY IN GOOD CONDITION. MANY SCUFFS AND SCRATCHES ALL OVER. ALL FABRIC IN GOOD CONDITION. RUBBER RETAINS FLEXIBILITY AND PLASTICS ARE IN GOOD SHAPE WITH NO CRACKS. .E: PAPER PASS CERTIFICATE. GOLDENROD COLOURED PAPER. READS: "MSA - ULTRALITE DP - B.M.R. C/W FACEMASK. THIS UNIT TESTED AND HAD ACCEPTABLE PERFORMANCE ON SEPTEMBER 02, 2008. KEN HOBIAK" (WITH KEN'S SIGNATURE ABOVE HIS TYPED NAME). REVERSE OF PAPER: "THIS UNI PERFORM KEN H" (APPEARS TO HAVE MISPRINTED ON THIS SIDE). PAPER IS STANDARD LETTER SIZE. CONDITION IS GOOD: PAPER HAS BEEN CRUMBLED AND HAS A FEW SMALL TEARS AROUND THE OUTSIDE.
Subjects
MINING & MINERAL HARVESTING T&E
Historical Association
SAFETY SERVICES
History
THIS SELF-CONTAINED BREATHING APPARATUS (SCBA) WAS USED BY THE LETHBRIDGE FIRE DEPARTMENT. IN A WRITTEN STATEMENT PROVIDED AT THE TIME OF DONATION, JESSE KURTZ, DEPUTY CHIEF – SUPPORT SERVICES (RETIRED), EXPLAINED THAT THE MASK WAS “USED BY ALL FIREFIGHTERS TO CONNECT TO THE BELT MOUNTED REGULATOR SCBA TO ENTER HAZARDOUS ATMOSPHERES” AND THAT THE HARNESS WAS “USED BY ALL FIREFIGHTERS TO BREATH IN HAZARDOUS (SMOKY) ATMOSPHERES.” HE CONTINUED SAYING THAT THERE ARE “MORE MODERN MASK MOUNTED REGULATOR SCBAS [THAT HAVE BEEN] DEVELOPED AND PURCHASED.” IN THE SUMMER OF 2015, COLLECTIONS TECHNICIAN KEVIN MACLEAN, CONDUCTED A SERIES OF INTERVIEWS WITH CURRENT AND FORMER MEMBERS OF THE FIRE DEPARTMENT, INCLUDING: CLIFF “CHARLIE” BROWN (HIRED IN 1966, RETIRED 2004), TREVOR LAZENBY (HIRED IN 1994), AND LAWRENCE DZUREN (HIRED 1959, RETIRED 1992). BROWN EXPLAINED THAT THIS SCBA “WAS AN ON-DEMAND REGULATOR. THAT WAS NICE TO HAVE DEMAND, BECAUSE NO MATTER WHO IT WAS, THE HARDER YOU BREATHED, THE MORE AIR IT WOULD GIVE YOU. THE HARNESS IS PROBABLY MORE COMFORTABLE [THAN PREVIOUS ONES]. SOME GUYS WOULD USE THREE TANKS, SO THE HARNESS WAS A LITTLE BIT MORE COMFORTABLE FOR THEM. THEY’D COME OUT, THEY’D TURN AROUND, THEY WOULDN’T EVEN TAKE OFF THEIR GEAR. THEY’D TURN AROUND, THERE’D BE GUYS WHO WOULD TAKE THE TANK OFF, PUT ANOTHER TANK ON, HOOK IT ALL UP, A GOOD PAT ON THE BACK, AND BACK IN THEY’D GO WITH ANOTHER TANK. THEY’D DO THAT THREE TIMES BEFORE … THEY WERE JUST TOO TIRED … WE DIDN’T HAVE AN AIR COMPRESSOR TO FILL OUR OWN TANKS. I CAN’T REMEMBER WHERE THEY WENT. THEY MUST HAVE WENT TO THE SWIMMING POOL.” LAZENBY CONTINUED SAYING THAT THIS SCBA WAS “A VERY, VERY OLDER GENERATION SCBA BOTTLE. THESE WERE KIND OF RUDIMENTARY DESIGN. THE BOTTLE WAS STEEL ON THESE, WHICH MADE THEM VERY, VERY HEAVY. MODERN BOTTLES ARE FIBERGLASS WRAPPED WHICH MAKES THEM MUCH, MUCH LIGHTER; ADDED TO WHICH, IT HAD A BARELY PADDED HARNESS SYSTEM ON IT AND BASICALLY A GLORIFIED SEATBELT STRAP FOR A WAIST STRAP. SO WITH THESE KINDS OF THINGS, YOU DON’T WANT TO KEEP A TON OF WEIGHT ON YOUR SHOULDERS BECAUSE IT FATIGUES YOUR UPPER BODY VERY, VERY QUICKLY WHEN YOU’RE WORKING. BUT WITH THIS TYPE OF HARNESS ON THEM, IF YOU CINCHED THE WAIST UP REALLY TIGHT AND TOOK THE PRESSURE OFF YOUR SHOULDERS, THIS JUST SEEMED TO DIG INTO YOUR WAIST LIKE CRAZY, LIKE IT WAS VERY UNCOMFORTABLE TO WEAR … THAT BEING SAID, WHEN GUYS WENT TO THIS FROM LIKE THE CANISTERS THAT THEY USED TO WEAR, THIS MUST HAVE BEEN LIKE A NEW LEASE ON LIFE FOR THESE GUYS … I WORE THESE IN TRAINING – I DON’T THINK I EVER WORE ONE OF THESE BOTTLES ON AN ACTUAL FIRE CALL … WE HAD THE FIBERGLASS ONES IN FRONTLINE SERVICE WHEN I STARTED SO THIS WOULD BE PRE-1994, IF I’M NOT MISTAKEN. I DON’T THINK WE HAD THESE ON THE TRUCKS IN ’94. THEY WERE AROUND AND THEY WERE BACKUPS, BUT THEY WEREN’T FRONTLINE.” HE ELABORATED FURTHER, SAYING: “WE DIDN’T HAVE INDIVIDUAL MASKS; WE SHARED MASKS ON THE FIRE DEPARTMENT BACK THEN … THERE WASN’T ENOUGH MONEY FOR THEM TO BUY US OUR OWN INDIVIDUAL FACE PIECE … SO WHAT WE USED TO DO IS AFTER EVERY INCIDENT OR AFTER EVERY TIME YOU WORE ONE OF THESE THINGS, IT WOULD COME OFF THE TRUCK, WE WOULD HAVE A BOTTLE OF MSA MASK CLEANER THAT WE WOULD PUT INTO A TUB, WE WOULD MAKE A SOAPY WATER SOLUTION, WE WOULD WASH THE MASK, RINSE THE MASK, LET IT HANG TO DRY, AND THE NEXT PERSON WOULD USE IT AS THE NEXT SHIFT CAME ON.” HE ADDED THAT NOW EVERYONE IN THE DEPARTMENT HAS THEIR OWN MASK: “WE’VE HAD OUR OWN MASKS FOR 10-12 YEARS. WE STILL SHARE THE SCBAS AS FAR AS THE BOTTLE AND THE HARNESS GOES … THEY’RE IN THE RACKS ON THE TRUCK, IN THE BACKS OF THE SEATS AND DOWN IN BY THE HOSE OR THE PUMP COMPARTMENTS.” IN DISCUSSING WHY THIS MODEL IS NO LONGER USED, LAZENBY STATED: “THIS HOSE EASILY CRIMPED SO YOUR AIR SUPPLY COULD BE CUT OFF. THE AIR SUPPLY THAT NOW GOES FROM THE TANK TO YOUR MASK IS A MUCH MORE RIGID HOSE THAT, REALLY, YOU’D HAVE TO BASICALLY BEND IT IN HALF TO STOP THE FLOW OF AIR.” DZUREN ADDED FURTHER: “PRIOR TO [THIS] OUR BREATHING APPARATUS WAS WHAT THEY CALLED A CANISTER TYPE OF BREATHING APPARATUS … IT WAS JUST A CANISTER THAT YOU HAD IN FRONT OF YOU HERE AND IT WAS LAYERS OF … GEL, AND SAND, AND SILICA … THERE WAS A SHELF-LIFE WITH THOSE THINGS. IF YOU USED THEM, YOU PRETTY WELL HAD TO DISCARD THEM AFTER YOU USED THEM.” WHEN ASKED WHEN THIS TYPE OF SCBA CAME INTO SERVICE, DZUREN STATED: “I WOULD PROBABLY SAY MAYBE IN THE ‘70S SOMETIME? … I RECALL GUYS GOING IN WHEN WE JUST HAD THOSE CANISTERS. THEY WOULD GO WITHOUT ANYTHING. AND THEY WOULD COME OUT AFTER A WHILE AND THEY WOULD BE BARFING THEIR GUYS OUT … IT SEEMED TO BE, EVEN PRIOR TO MY TIME, WHEN THE STORIES I HEARD FROM GUYS THERE LONGER THAN MYSELF, THAT SEEMED TO BE THE MACHO THING. GET IN THERE AND THEY’D GET IN THERE WITHOUT A MASK. BUT EVENTUALLY, YOU KNOW, BETTER THINKING CAME ALONG AND SAID ‘DON’T BE SILLY, GET SOME STUFF ON THERE.’ BUT ONCE THEY GOT IT, AND THEY STARTED TO USE IT, YOU DID FEEL A LOT BETTER GOING IN, ‘CAUSE PRIOR TO USE GETTING THAT WE HEARD THE HORROR STORIES OF GUYS WHO DID SUCCUMB TO THE ELEMENTS BECAUSE OF ALL THOSE CANISTER TYPES, BUT ONCE THEY GOT [THIS SCBA] IT WAS BETTER.” SEE PERMANENT FILE FOR FULL INTERVIEW TRANSCRIPTS AND ADDITIONAL INFORMATION ABOUT THE LETHBRIDGE FIRE DEPARTMENT.
Catalogue Number
P20150010017
Acquisition Date
2015-02
Collection
Museum
Images
Less detail
Other Name
BALE OR HAY HOOK
Date Range From
1940
Date Range To
1950
Material Type
Artifact
Materials
METAL, WOOD, IRON
Catalogue Number
P20150010009
  2 images  
Material Type
Artifact
Other Name
BALE OR HAY HOOK
Date Range From
1940
Date Range To
1950
Materials
METAL, WOOD, IRON
No. Pieces
1
Height
11.0
Length
24.5
Width
12..7
Description
HAY CROOK OR BALE HOOK. METAL AND WOODEN HANDLE, WITH CAST IRON HOOK. MAIN PORTION OF THE HANDLE IS WOODEN, WITH A MEDIUM AND LIGHT GREY PAINTED FINISH. WHERE THE HANDLE ATTACHES TO THE HOOK IS SILVER COLOURED METAL, WITH A MEDIUM LIGHT BLUE PAINTED FINISH. THE HOOK ITSELF IS CAST IRON, WITH A RED PAINTED FINISH. OVERALL IN FAIR TO GOOD CONDITION. STRUCTURALLY THE HOOK IS IN VERY GOOD CONDITION, BUT THE PAINTED SURFACES ARE ALL VERY WORN. THE WOODEN HANDLE APPEARS TO HAVE BEEN FINISHED IN A LIGHT GREY FIRST, WITH A LATER ADDITION OF MEDIUM GREY PAINT. BOTH OF THE GREY FINISHS ARE VERY SCUFFED AND SCRATCHED AND THERE IS A LOT OF EXPOSED WOOD. THE MEDIUM BLUE FINISH OF THE METAL PORTION OF THE HANDLE HAS FLAKED OFF IN SEVERAL AREAS. SEVERAL MORE AREAS OF THE FINISH ARE LOOSE. THE RED FINISH ON THE CAST IRON IS VERY WORN, REVEILING BOTH UNFINISHED METAL AND A LIGHT BLUE PAINT.
Subjects
AGRICULTURAL T&E
Historical Association
SAFETY SERVICES
History
THIS HAY CROOK OR BALE HOOK WAS USED BY THE LETHBRIDGE FIRE DEPARTMENT. IN THE SUMMER OF 2015, COLLECTIONS TECHNICIAN KEVIN MACLEAN, CONDUCTED A SERIES OF INTERVIEWS WITH CURRENT AND FORMER MEMBERS OF THE FIRE DEPARTMENT, INCLUDING: CLIFF “CHARLIE” BROWN (HIRED IN 1966, RETIRED 2004), TREVOR LAZENBY (HIRED IN 1994), RAYMOND “RAY” PETIT (HIRED 1965, RETIRED 1998), AND LAWRENCE DZUREN (HIRED 1959, RETIRED 1992). ALL FOUR MEN AGREE THAT THE HOOK WAS USED TO HELP FIGHT HAYSTACK FIRES ON LOCAL FARMS. BROWN EXPLAINS THE DIFFICULTY OF DEALING WITH A HAYSTACK FIRE AND WHY THE HOOK WAS SO USEFUL: “WITH A HAYSTACK FIRE, ONCE IT STARTS ON FIRE, THE WHOLE STACK IS WRECKED, EVEN THOUGH IT DOESN’T BURN, BECAUSE THE SMOKE GOES THROUGH IT, THE HAY IS CONTAMINATED AND THE ANIMALS AREN’T GOING TO EAT IT, SO YOU PRETTY WELL HAVE TO KNOCK IT DOWN ANYWAY. AS SOON AS YOU PUT WATER ON IT, IT WILL SMOLDER, AND SMOLDER, AND SMOLDER. PROBABLY ONE OF THE HARDEST FIRES TO PUT OUT IS A HAYSTACK FIRE, BECAUSE YOU CAN’T GET THE WATER TO IT. … YOU PUT YOUR WATER, YOU SOAK ON TOP OF THE BALES AND IT JUST WON’T SOAK IN, SO YOU HAVE TO TAKE EVERY BALE APART, BREAK EVERY PIECE APART, EVERY LITTLE BALE, BREAK IT DOWN, HOSE IT DOWN, NEXT BALE, BREAK IT APART, HOSE IT DOWN, AND CONTINUE.” LAZENBY RECALLED SEEING THE HAY CROOK ON THE TRUCK WHEN HE FIRST STARTED AND EXPLAINED: “I’M NOT A FARM KID AND I DIDN’T KNOW WHAT IT WAS.” HE ASKED WHAT IT WAS, RECEIVING THE REPLY: “’WELL, IT’S A BALE HOOK’ AND I SAID, ‘SO I’M NOT TRYING TO BE A SMART ALECK HERE, BUT WHY DO WE HAVE BALE HOOKS ON THE ENGINE?’ THEY SAID, ‘WELL, IN CASE WE GO TO A HAY BALE FIRE.’ YOU KNOW, ASK A SIMPLE QUESTION, YOU GET A SIMPLE ANSWER, RIGHT? … I NEVER SAW ONE USED AND … THIS IS ONE OF THOSE PIECES OF EQUIPMENT THAT GOT PHASED OUT SHORTLY AFTER THE BEGINNING OF MY CAREER. … THIS WAS ONE OF THOSE PIECES THAT WE FOUND THAT WE JUST DIDN’T HAVE A USE FOR. YOU CAN MOVE HAY BALES WITH OTHER MEANS THAN TO HAVE A SET OF BALE HOOKS ON THE TRUCKS, SO THEY WENT AWAY.” PETIT RECALLED USING THE HOOK AND ADDED: “IT WAS USUALLY ON THE PUMP WHEN THEY RESPONDED TO GRASS FIRES … SOMETIMES WE’D TAKE THAT, NOT USUALLY TO FIGHT THE FIRE, BUT WHEN YOU HAD TO KNOCK [THE BALES] DOWN, YOU HAD TO DRAG THE BALES OUT OF THE WAY. OTHERWISE THEY WOULD START THE FIRE ALL OVER AGAIN. IT WASN’T USED THAT MUCH BUT WE DID GO TO QUITE A FEW FIRES, YOU KNOW, STACKS OF BALES.” DZUREN AGREED: “WELL, IT’S THE BAILING HOOK. AND THAT’S JUST TO MOVE ANY, WHETHER IT’S A BALE OF STRAW OR ANY OTHER ITEM THAT HAD TO BE MOVED AWAY FROM THE FIRE, OR JUST, YOU KNOW, SEGREGATED FROM WHAT WAS ALREADY BURNING.” HE RECALLED THAT IT WAS IN USE WHEN HE STARTED IN 1959 AND ADDED “IT WOULD HAVE BEEN ON ONE OF THE VEHICLES … PARTICULARLY … COUNTY VEHICLES THAT WOULD RESPOND OUT TO THE COUNTY, TO THE FARM FIRE.” SEE PERMANENT FILE FOR FULL INTERVIEW TRANSCRIPTS AND ADDITIONAL INFORMATION ABOUT THE LETHBRIDGE FIRE DEPARTMENT.
Catalogue Number
P20150010009
Acquisition Date
2015-02
Collection
Museum
Images
Less detail