Skip header and navigation

8 records – page 1 of 1.

Other Name
BLANKET
Date Range From
1920
Date Range To
1990
Material Type
Artifact
Materials
RAW FLAX YARN
Catalogue Number
P20160003007
  2 images  
Material Type
Artifact
Other Name
BLANKET
Date Range From
1920
Date Range To
1990
Materials
RAW FLAX YARN
No. Pieces
1
Length
139
Width
99.5
Description
HAND-WOVEN BLANKET MADE FROM RAW FLAX. THE BLANKET IS COMPOSED OF 2 SECTIONS OF THE SAME SIZE OF MATERIAL THAT ARE JOINED TOGETHER WITH A SEAM AT THE CENTER. ON THE FRONT SIDE (WITH NEAT SIDE OF THE STITCHING AND PATCHES), THERE ARE THREE PATCHES ON THE BLANKET MADE FROM LIGHTER, RAW-COLOURED MATERIAL. ONE SECTION OF THE FABRIC HAS TWO OF THE PATCHES ALIGNED VERTICALLY NEAR THE CENTER SEAM. THE AREA SHOWING ON ONE PATCH IS 3 CM X 5 CM AND THE OTHER IS SHOWING 5 CM X 6 CM. ON THE OPPOSITE SECTION THERE IS ONE PATCH THAT IS 16 CM X 8.5 CM SEWN AT THE EDGE OF THE BLANKET. THE BLANKET IS HEMMED ON BOTH SHORT SIDES. ON THE OPPOSING/BACK SIDE OF THE BLANKET, THE FULL PIECES OF THE FABRIC FOR THE PATCHES ARE SHOWING. THE SMALLER PATCH OF THE TWO ON THE ONE HALF-SECTION OF THE BLANKET IS 8CM X 10 CM AND THE OTHER PATCH ON THAT SIDE IS 14CM X 15CM. THE PATCH ON THE OTHER HALF-SECTION IS THE SAME SIZE AS WHEN VIEWED FROM THE FRONT. THERE IS A SEVERELY FADED BLUE STAMP ON THIS PATCH’S FABRIC. FAIR CONDITION. THERE IS RED STAINING THAT CAN BE SEEN FROM BOTH SIDES OF THE BLANKET AT THE CENTER SEAM, NEAR THE EDGE OF THE BLANKET AT THE SIDE WITH 2 PATCHES (CLOSER TO THE LARGER PATCH), AND NEAR THE SMALL PATCH AT THE END FURTHER FROM THE CENTER. THERE IS A HOLE WITH MANY LOOSE THREADS SURROUNDING NEAR THE CENTER OF THE HALF SECTION WITH ONE PATCH. THERE ARE VARIOUS THREADS COMING LOOSE AT MULTIPLE POINTS OF THE BLANKET.
Subjects
AGRICULTURAL T&E
BEDDING
Historical Association
AGRICULTURE
DOMESTIC
ETHNOGRAPHIC
History
THE KONKINS WERE A RUSSIAN-SPEAKING FAMILY FROM THE TOWN OF SHOULDICE, ALBERTA, NEAR CALGARY. THEY AND MANY OTHER RUSSIAN FAMILIES COMPOSED THAT TOWN’S DOUKHOBOR COLONY. IT WAS THERE WILLIAM KONKIN MARRIED ELIZABETH WISHLOW. IN 1928, THEIR DAUGHTER, ELSIE WAS BORN. THEY LATER MOVED TO A FARM IN VAUXHALL, ALBERTA. THE PRECEDING AND FOLLOWING INFORMATION HAS BEEN EXTRACTED FROM A TWO-PART INTERVIEW WITH DONOR ELSIE MORRIS, WHICH WAS CONDUCTED BY COLLECTIONS TECHNICIAN KEVIN MACLEAN ON FEBRUARY 17, 2016. ADDITIONAL INFORMATION COMES FROM FAMILY HISTORIES AND TEXTS PROVIDED BY THE DONOR. A FULL HISTORY OF THE KONKIN FAMILY CAN BE FOUND WITH THE RECORD P20160003001. ACCORDING TO A NOTE THAT WAS ATTACHED TO THIS LIGHTWEIGHT BLANKET AT THE TIME OF ACQUISITION THE BLANKET IS BELIEVED TO HAVE BEEN MADE C. 1920S. MORRIS SAYS HER MEMORY OF THE BLANKET DATES AS FAR BACK AS SHE CAN REMEMBER: “RIGHT INTO THE ‘30S, ‘40S AND ‘50S BECAUSE MY MOTHER DID THAT RIGHT UP UNTIL NEAR THE END. I USE THAT EVEN IN LETHBRIDGE WHEN I HAD A GARDEN. [THIS TYPE OF BLANKET] WAS USED FOR TWO PURPOSES. IT WAS EITHER PUT ON THE BED UNDERNEATH THE MATTRESS THE LADIES MADE OUT OF WOOL AND OR ELSE IT WAS USED, A DIFFERENT PIECE OF CLOTH WOULD BE USED FOR FLAILING THINGS. [THE] FLAIL ACTUALLY GOES WITH IT AND THEY BANG ON THE SEEDS AND IT WOULD TAKE THE HULLS OFF… IT’S HAND WOVEN AND IT’S MADE OUT OF POOR QUALITY FLAX… IT’S UNBLEACHED, DEFINITELY… RAW LINEN." THIS SPECIFIC BLANKET WAS USED FOR SEEDS MORRIS RECALLS: “…IT HAD TO BE A WINDY DAY… WE WOULD PICK DRIED PEAS OR BEANS OR WHATEVER BEET SEEDS AND WE WOULD BEAT AWAY AND THEN WE WOULD STAND UP, HOLD IT UP AND THE BREEZE WOULD BLOW THE HULLS OFF AND THE SEEDS WOULD GO STRAIGHT DOWN [ONTO THE BLANKET.” THE SEEDS WOULD THEN BE CARRIED ON THE BLANKET AND THEN PUT INTO A PAIL. OF THE BLANKET’S CLEAN STATE, MORRIS EXPLAINS, “THEY’RE ALWAYS WASHED AFTER THEY’RE FINISHED USING THEM.” WHEN SHE LOOKS AT THIS ARTIFACT, MORRIS SAYS: “I FEEL LIKE I’M OUT ON THE FARM, I SEE FIELDS AND FIELDS OF FLAX, BLUE FLAX. BUT THAT’S NOT WHAT SHE USED IT FOR. SHE DID USE IT IF SHE WANTED A LITTLE BIT OF THE FLAX THEN SHE’D POUND THE FLAX, BUT THAT WASN’T OFTEN. IT WAS MOSTLY BEANS AND PEAS.” IT IS UNKNOWN WHO WOVE THIS BLANKET. PLEASE SEE THE PERMANENT FILE FOR MORE INFORMATION INCLUDING FULL INTERVIEW TRANSCRIPTION, OBITUARIES, PHOTOGRAPHS, AND FAMILY HISTORIES.
Catalogue Number
P20160003007
Acquisition Date
2016-02
Collection
Museum
Images
Less detail
Other Name
FLAIL PADDLE
Date Range From
1920
Date Range To
1990
Material Type
Artifact
Materials
WOOD
Catalogue Number
P20160003001
  1 image  
Material Type
Artifact
Other Name
FLAIL PADDLE
Date Range From
1920
Date Range To
1990
Materials
WOOD
No. Pieces
1
Height
4
Length
41
Width
12
Description
WOODEN FLAIL. ONE END HAS A PADDLE WITH A WIDTH THAT TAPERS FROM 12 CM AT THE TOP TO 10 CM AT THE BASE. THE PADDLE IS WELL WORN IN THE CENTER WITH A HEIGHT OF 4 CM AT THE ENDS AND 2 CM IN THE CENTER. HANDLE IS ATTACHED TO THE PADDLE AND IS 16 CM LONG WITH A CIRCULAR SHAPE AT THE END OF THE HANDLE. ENGRAVED ON THE CIRCLE THE INITIALS OF DONOR’S MATERNAL GRANDMOTHER, ELIZABETH EVANAVNA WISHLOW, “ . . .” GOOD CONDITION. THERE IS SLIGHT SPLITTING OF THE WOOD ON THE PADDLE AND AROUND THE JOINT BETWEEN THE HANDLE AND THE PADDLE. OVERALL WEAR FROM USE.
Subjects
AGRICULTURAL T&E
Historical Association
AGRICULTURE
ETHNOGRAPHIC
History
THE FOLLOWING INFORMATION HAS BEEN EXTRACTED FROM A TWO-PART INTERVIEW WITH DONOR ELSIE MORRIS, WHICH WAS CONDUCTED BY COLLECTIONS TECHNICIAN KEVIN MACLEAN ON FEBRUARY 17, 2016. ADDITIONAL INFORMATION COMES FROM FAMILY HISTORIES AND TEXTS PROVIDED BY THE DONOR. THIS WOODEN DOUKHOBOR TOOL IS CALLED A “FLAIL.” A NOTE WRITTEN BY ELSIE MORRIS THAT WAS ATTACHED TO THE FLAIL AT THE TIME OF DONATION EXPLAINS, “FLAIL USED FOR BEATING OUT SEEDS. BELONGED TO ELIZABETH EVANAVNA WISHLOW, THEN HANDED TO HER DAUGHTER ELIZABETH PETROVNA KONKIN WHO PASSED IT ON TO HER DAUGHTER ELIZABETH W. MORRIS.” ALTERNATELY, IN THE INTERVIEW, MORRIS REMEMBERED HER GRANDMOTHER’S, “… NAME WAS JUSOULNA AND THE MIDDLE INITIAL IS THE DAUGHTER OF YVONNE. YVONNE WAS HER FATHER’S NAME AND WISHLOW WAS HER LAST NAME.” THE FLAIL AND THE BLANKET, ALSO DONATED BY MORRIS, WERE USED TOGETHER AT HARVEST TIME TO EXTRACT AND COLLECT SEEDS FROM GARDEN CROPS. ELSIE RECALLED THAT ON WINDY DAYS, “WE WOULD PICK DRIED PEAS OR BEANS, OR WHATEVER, AND WE WOULD [LAY THEM OUT ON THE BLANKET], BEAT AWAY AND THEN HOLD [THE BLANKET] UP, AND THE BREEZE WOULD BLOW THE HULLS OFF AND THE SEEDS WOULD GO STRAIGHT DOWN.” THE FLAIL CONTINUED TO BE USED BY ELIZABETH “RIGHT UP TO THE END,” POSSIBLY INTO THE 1990S, AND THEREAFTER BY MORRIS. WHEN ASKED WHY SHE STOPPED USING IT HERSELF, MORRIS SAID, “I DON’T GARDEN ANYMORE. FURTHERMORE, PEAS ARE SO INEXPENSIVE THAT YOU DON’T WANT TO GO TO ALL THAT WORK... I DON’T KNOW HOW MANY PEOPLE HARVEST THEIR SEEDS. I THINK WE JUST GO AND BUY THEM IN PACKETS NOW.” THE KONKINS WERE A RUSSIAN-SPEAKING FAMILY FROM THE TOWN OF SHOULDICE, ALBERTA, NEAR CALGARY. THEY AND MANY OTHER RUSSIAN FAMILIES COMPOSED THAT TOWN’S DOUKHOBOR COLONY. DOUKHOBOURS CAME TO CANADA IN FINAL YEARS OF THE 19TH CENTURY TO ESCAPE RELIGIOUS PERSECUTION IN RUSSIA. ELIZABETH KONKIN (NEE WISHLOW) WAS BORN IN CANORA, SK ON JANUARY 22, 1907 TO HER PARENTS, PETER AND ELIZABETH WISHLOW. AT THE AGE OF 6 SHE MOVED WITH HER FAMILY TO A DOUKHOBOR SETTLEMENT AT BRILLIANT, BC, AND THEY LATER MOVED TO THE DOUKHOBOR SETTLEMENT AT SHOULDICE. IT WAS HERE THAT SHE MET AND MARRIED WILLIAM KONKIN. THEIR DAUGHTER, ELSIE MORRIS (NÉE KONKIN), WAS BORN IN SHOULDICE IN 1928. INITIALLY, WILLIAM TRIED TO SUPPORT HIS FAMILY BY GROWING AND PEDDLING VEGETABLES. WHEN THE FAMILY RECOGNIZED THAT GARDENING WOULD NOT PROVIDE THEM WITH THE INCOME THEY NEEDED, WILLIAM VENTURED OUT TO FARM A QUARTER SECTION OF IRRIGATED LAND 120 KM (75 MILES) AWAY IN VAUXHALL. IN 1941, AFTER THREE YEARS OF FARMING REMOTELY, HE AND ELIZABETH DECIDED TO LEAVE THE ALBERTA COLONY AND RELOCATE TO VAUXHALL. MORRIS WAS 12 YEARS OLD AT THE TIME. MORRIS STATED: “… [T]HEY LEFT THE COLONY BECAUSE THERE WERE THINGS GOING ON THAT THEY DID NOT LIKE SO THEY WANTED TO FARM ON THEIR OWN. SO NOW NOBODY HAD MONEY, SO VAUXHALL HAD LAND, YOU KNOW, THAT THEY WANTED TO HAVE THE PEOPLE AND THEY DIDN’T HAVE TO PUT ANY DOWN DEPOSIT THEY JUST WERE GIVEN THE LAND AND THEY HAD TO SIGN A PAPER SAYING THEY WOULD GIVE THEM ONE FOURTH OF THE CROP EVERY YEAR. THAT WAS HOW MY DAD GOT PAID BUT WHAT MY DAD DIDN’T KNOW WAS THAT THE MONEY THAT WENT IN THERE WAS ACTUALLY PAYING OFF THE FARM SO HE WENT TO SEE MR., WHAT WAS HIS LAST NAME, HE WAS THE PERSON IN CHARGE. ANYWAY HE SAID TO HIM “HOW LONG WILL IT BE BEFORE I CAN PAY OFF THIS FARM” AND HE SAYS “YOU’VE BEEN PAYING IT RIGHT ALONG YOU OWE ABOUT TWO HUNDRED AND A FEW DOLLARS”. WELL THAT WAS A REAL SURPRISE FOR THEM SO THEY GAVE THEM THE TWO HUNDRED AND WHATEVER IT WAS THAT HE OWED AND HE BECAME THE OWNER OF THE FARM." MORRIS WENT ON, ”THE DOUKHOBORS ARE AGRARIAN, THEY LIKE TO GROW THINGS THAT’S THEIR CULTURE OF OCCUPATION AND SO THE ONES WHO LIKED FRUIT MOVED TO B.C. LIKE MY UNCLE DID AND MY DAD LIKED FARMING SO HE MOVED TO VAUXHALL AND THERE WERE LET’S SEE, I THINK THERE WERE FOUR OTHER FAMILIES THAT MOVED TO VAUXHALL AND THREE OF THE MEN GOT TOGETHER AND DECIDED THEY WERE GOING TO GET THEIR TOOLS TOGETHER LIKE A TRACTOR AND MACHINERY THEY NEEDED AND THEN THEY WOULD TAKE TURNS…” THE KONKINS RETIRED TO LETHBRIDGE FROM VAUXHALL IN 1968. MORRIS, BY THEN A SCHOOL TEACHER, RELOCATED TO LETHBRIDGE WITH HER OWN FAMILY. WILLIAM KONKIN PASSED AWAY IN LETHBRIDGE ON MARCH 3, 1977 AT THE AGE OF 72 AND 23 YEARS LATER, ON APRIL 8, 2000, ELIZABETH KONKIN PASSED AWAY IN LETHBRIDGE. A NUMBER OF ARTIFACTS PREVIOUSLY BELONGING TO THE FAMILY EXIST IN THE GALT COLLECTION. THE KONKINS RETIRED TO LETHBRIDGE FROM VAUXHALL IN 1968. MORRIS, BY THEN A SCHOOL TEACHER, RELOCATED TO LETHBRIDGE WITH HER OWN FAMILY. WILLIAM KONKIN PASSED AWAY IN LETHBRIDGE ON MARCH 3, 1977 AT THE AGE OF 72 AND 23 YEARS LATER, ON APRIL 8, 2000, ELIZABETH KONKIN PASSED AWAY IN LETHBRIDGE. A NUMBER OF ARTIFACTS PREVIOUSLY BELONGING TO THE FAMILY EXIST IN THE GALT COLLECTION. PLEASE SEE THE PERMANENT FILE FOR MORE INFORMATION INCLUDING FULL INTERVIEW TRANSCRIPTION, OBITUARIES, PHOTOGRAPHS, AND FAMILY HISTORIES.
Catalogue Number
P20160003001
Acquisition Date
2016-02
Collection
Museum
Images
Less detail
Other Name
ATTIC LADDER
Date Range From
1960
Date Range To
2010
Material Type
Artifact
Materials
METAL, RUBBER
Catalogue Number
P20150010022
  2 images  
Material Type
Artifact
Other Name
ATTIC LADDER
Date Range From
1960
Date Range To
2010
Materials
METAL, RUBBER
No. Pieces
1
Height
314.2
Length
4.9
Width
33.5
Description
ADJUSTABLE LADDER, SIDE RAILS COME TOGETHER TO MAKE THE LADDER MORE COMPACT (LADDER IS ONLY 8.0CM WIDE WHEN THE SIDE RAILS ARE TOGETHER). SILVER COLOURED METAL, WITH ORANGE PAINT, BLACK RUBBER, AND EIGHT RUNGS. ANTI-SLIP SAFETY SHOE ON THE BOTTOM OF BOTH SIDE RAILS. SAFETY SHOE IS BLACK RUBBER ON THE BOTTOM, WITH A PATTERN OF 10 CIRCLES PER SHOE BOTTOM. METAL TEETH ON THE FRONT OF THE SHOE. SHOES ARE ADJUSTABLE, BUT ARE VERY STIFF. BRACE COMES UP FROM THE BOTTOM AND LOCKS TO PREVENT LADDER RAILS FROM COLLAPSING BACK TOGETHER. BOTTOM OF LADDER HAS A 54.5CM SECTION OF BRIGHT ORANGE PAINT AND TOP HAS A 46.0CM SECTION OF BRIGHT ORANGE PAINT. TOP OF ONE RAIL HAS A BLACK RUBBER TOPPER. SMALL BLACK STICKER AT BOTTOM “P1” WITH SEVERAL STICKERS ON THE OPPOSITE RAIL: A ROUGHLY OVAL SHAPED, RED, BLACK, AND SILVER STICKER: “THIS IS A DUO-SAFETY LADDER. DUO-SAFETY LADDER CORP 519 W 9TH AVE. OSHKOSH, WIS.”; THEN A RECTANGULAR RED STICKER WITH WHITE WRITING: “THIS LADDER IS CERTIFIED TO COMPLY WITH N.F.P.A. SPEC 1931-1832; CURRENT EDITION, FOR FIRE DEPARTMENT GROUND LADDERS AND OSHA FIRE LADDER REQUIREMENTS. REFER TO DUO-SAFETY LADDER SAFETY BOOK FOR CARE – USE – MAINTENANCE ON THIS LADDER. DUO-SAFETY LADDER CORP. OSHKOSH, WI 54901”; THEN A WHITE STICKER WITH GOLD WRITING: “10”. THERE IS ALSO A SILVER COLOURED STICKER WITH HANDWRITING ON THIS SAME RAIL, LOCATED BETWEEN THE FIRST AND SECOND RUNGS: “TEST DATE: 25 NOV 2006. LADDER #: ATTIC #18. APPARATUS #: P1. APPARATUS #: P1.” BOTH RAILS HAVE THE FOLLOWING STICKERS, AT ROUGHLY THE MID-POINT OF THE LADDER: RECTANGULAR, WHITE BACKGROUND, BLUE BORDER, BLACK WRITING: “DANGER. FAILURE TO USE, UNDERSTAND, AND FOLLOW PROPER LADDER USAGE INSTRUCTIONS AS MADE AVAILABLE BY DUO-SAFETY LADDER, N.F.P.A., I.S.F.S.I., A.N.S.I., O.S.H.A., ETC. COULD CAUSE SERIOUS INJURY AND/OR DEATH.” RECTANGULAR, WHITE BACKGROUND, BLACK BORDER AND WRITING: “DANGER. WATCH FOR WIRES. THIS LADDER CONDUCTS ELECTRICITY.” RECTANGULAR, YELLOW, WITH BLACK WRITING: CAUTION. SET UP LADDER PROPERLY TO REDUCE SLIP AND OVERHEAD HAZARDS. FOLLOW THESE INSTRUCTIONS. 1. PLACE TOES AGAINST BOTTOM OF LADDER SIDE RAILS. 2. STAND ERECT. 3. EXTEND ARMS STRAIGHT OUT. 4. PALMS OF HANDS SHOULD TOUCH TOP OF RUNG AT SHOULDER LEVEL. OUT -->” STICKER ON THE INSIDE OF FOURTH RUNG FROM THE BOTTOM: WHITE BACKGROUND, BLACK WRITING: “REMOVE LADDER FROM SERVICE AND TEST IF ANY HEAT SENSOR TURNS DARK -->” LADDER IS IN GOOD OVERALL CONDITION. ADJUSTABLE FEET ARE VERY STIFF. LOTS OF SCUFF MARKS ALL OVER LADDER AND SOME STICKERS HAVE BEEN PARTIALLY REMOVED/SCRATCHED.
Subjects
REGULATIVE & PROTECTIVE T&E
Historical Association
SAFETY SERVICES
History
THIS ATTIC LADDER WAS USED BY THE LETHBRIDGE FIRE DEPARTMENT. IN A WRITTEN STATEMENT PROVIDED AT THE TIME OF DONATION, JESSE KURTZ, DEPUTY CHIEF – SUPPORT SERVICES (RETIRED), EXPLAINED THAT THE LADDER WAS “USED TO ACCESS ATTIC SPACES THROUGH SMALL ACCESS HOLES IN CEILINGS. USED WHEN WE DID NOT WANT TO PULL A CEILING DOWN AFTER A FIRE TO ENSURE THAT THE FIRE IN THE ATTIC WAS OUT.” HE CONTINUED SAYING THAT THIS LADDER WAS DECOMMISSIONED BECAUSE IT IS “OLD AND WORN OUT. ALL LADDERS MUST MEET MINIMUM ACCEPTANCE STANDARDS.” IN THE SUMMER OF 2015, COLLECTIONS TECHNICIAN KEVIN MACLEAN, CONDUCTED A SERIES OF INTERVIEWS WITH CURRENT AND FORMER MEMBERS OF THE FIRE DEPARTMENT, INCLUDING: CLIFF “CHARLIE” BROWN (HIRED IN 1966, RETIRED 2004), TREVOR LAZENBY (HIRED IN 1994), AND LAWRENCE DZUREN (HIRED 1959, RETIRED 1992). BROWN EXPLAINED THAT THIS IS “WHAT WE CALL A LITTLE ATTIC LADDER, TO GET BACK INTO A TIGHT PLACE WHERE YOU COULDN’T BRING A BIG LADDER IN … YOU COULD GET IT UP INTO THE ATTIC SO YOU COULD CHECK WHAT WAS IN THE ATTIC.” LAZENBY ELABORATED: “THIS IS A FOLDING ATTIC LADDER … THE RUNGS THAT SEPARATE THE TWO BEAM SECTIONS ARE ACTUALLY HINGED IN NATURE AND SO IT FOLDS UP AND FITS IN, TYPICALLY, A LITTLE COMPARTMENT ON THE BACK END OF THE TRUCK BECAUSE [THEY] HAVE SOME LONG, LATERAL STORAGE THERE. THESE SURPRISINGLY GET USED A FAIR AMOUNT, STILL.” HE CONTINUED SAYING “THEY’RE NARROW ENOUGH THAT THEY’RE ALMOST DIFFICULT TO CLIMB WITH YOUR BIG FIRE BOOTS ON.” LAZENBY EXPLAINED THAT THE LADDERS IN USE PRESENTLY ARE VERY SIMILAR TO THIS MODEL: “YOU CAN TELL BY LOOKING AT IT IT’S AN OLDER PIECE BUT THE CONSTRUCTION IS ESSENTIALLY THE SAME. THEY MIGHT BE USING SLIGHTLY LIGHTER MATERIALS NOW, BUT FROM WHAT I CAN SEE, THEY’RE BASICALLY THE SAME.” HE ADDED THAT HE WAS OFTEN THE ONE USING THE LADDER: “BECAUSE I WAS NEVER ONE OF THE BIGGER GUYS ON THE JOB, AND ESPECIALLY WHEN I STARTED I WAS PROBABLY TWENTY POUNDS LIGHTER THAN I AM NOW, IF THEY NEEDED SOMEONE TO GET INTO A SMALLER SPACE, I WAS THAT GUY, TYPICALLY, BECAUSE WHEN YOU WEIGHT 250 [POUNDS] AND YOU THROW THE SCBA ON AND ALL THE EQUIPMENT, IT’S DEFINITELY TOUGH FOR SOME OF THOSE GUYS TO GET THROUGH THAT ACCESS. SO, YES, I’VE BEEN IN MY FAIR SHARE OF ATTICS AND THAT’S THE ONLY MEANS TO GET UP THERE.” LAZENBY EXPLAINED THE IMPORTANCE OF USING THE LADDER: “ANY TIME A FIRE VENTS OUT OF A WINDOW AND TOUCHES ANY PART OF THE SOFFIT, IT’S INCUMBENT THAT YOU HAVE TO ABSOLUTELY CHECK THAT BECAUSE IF YOU DON’T AND YOU’RE OPERATING UNDERNEATH AN ATTIC FIRE, THAT’S A VERY, VERY UNSAFE PLACE TO BE.” DZUREN ADDED: “THAT’S A COLLAPSIBLE LADDER. IT’S KIND OF LIKE A SCISSOR TYPE OF LADDER. IT WAS VERY COMPACT, YOU COULD STORE IT ON ONE OF YOUR VEHICLES WITHOUT IT TAKING UP TOO MUCH ROOM … YOU’D CARRY THAT INTO YOUR HOUSE IF AN OFFICER WANTED YOU TO GO UP INTO AN ATTIC … IT WAS EASY TO TRANSPORT AND ONCE YOU GOT IT INTO THE OPENING YOU COULD JUST GIVE IT A SWITCH AND IT WOULD OPEN UP AND YOU COULD JUST CLIMB RIGHT UP TO THE SPOT THERE.” SEE PERMANENT FILE FOR FULL INTERVIEW TRANSCRIPTS AND ADDITIONAL INFORMATION ABOUT THE LETHBRIDGE FIRE DEPARTMENT.
Catalogue Number
P20150010022
Acquisition Date
2015-02
Collection
Museum
Images
Less detail
Other Name
PIERCING NOZZLE
Date Range From
1970
Date Range To
1990
Material Type
Artifact
Materials
BRASS, RUBBER, STEEL
Catalogue Number
P20150010006
  2 images  
Material Type
Artifact
Other Name
PIERCING NOZZLE
Date Range From
1970
Date Range To
1990
Materials
BRASS, RUBBER, STEEL
No. Pieces
1
Length
151.1
Width
10.2
Diameter
6.3
Description
PIERCING NOZZLE. BRASS, WITH CHROME PLATE, STEEL, AND BLACK RUBBER. CYLINDRICAL END OF NOZZLE HEAD IS THREADED, TO ALLOW A HOSE TO BE CONNECTED. TEXTURED EDGE NEAR THREADING. THROUGH THIS OPENING A BLACK RUBBER RING AND METAL MESH ARE VISIBLE. ADJUSTABLE HANDLE EMBOSSED ON ONE SIDE WITH “AKRON BRASS” AND “1 1/2 4 WAP” ON THE OTHER. (NOTE: WAP IS A BEST GUESS, LETTERS HAVE LOST THEIR DEFINITION.) BELOW HANDLE, STAMPED INTO THE METAL BODY OF THE NOZZLE IS “SHUT FOG OPEN”. HANDLE MARKS CHANGE IN SHAPE FROM CYLINDRICAL TO TRIANGULAR. TRIANGULAR PORTION HAS A BLACK STICKER “Q2” AND A STRIPE OF YELLOW PAINT, NEAR THE CONNECTION WITH THE PIPE. A SMALL RECTANGULAR PUSH BUTTON ALLOWS THE NOZZLE TO BE DISCONNECTED FROM THE PIPE. SMALL HOLE THROUGH THE NOZZLE HEAD VISIBLE AT THE CONNECTION OF THE PIPE AND HEAD, WHICH OPENS AND CLOSES WITH THE OPENING AND CLOSING OF THE HANDLE. NEAR THE CONNECTION OF THE PIPE AND HEAD STAMPED INTO THE METAL OF THE PIPE “LFD 62”, WITH THE STAMP BEING PARTIALLY FILLED IN WITH WHITE PAINT. TWO SECTIONS OF STEEL PIPING HAVE BEEN PERMANENTLY THREADED TOGETHER. END OF PIPE HAS THREE SETS OF TWELVE HOLES EACH AROUND THE PIPE, 13.5CM FROM THE END. TIP OF PIPE IS ANGLED, TO CREATE A SHARP END TO PENETRATE THROUGH WALLS. OVERALL GOOD CONDITION. WELL-WORN. CHROME PLATING HAS WORN AWAY, ESPECIALLY ON THE EDGES OF THE HANDLE. LOTS OF SCRATCHES AND SCUFF MARKS ALL OVER. VARIOUS BLACK STAINS ON THE PIPE SECTION.
Subjects
REGULATIVE & PROTECTIVE T&E
Historical Association
SAFETY SERVICES
History
THIS PIERCING NOZZLE WAS USED BY THE LETHBRIDGE FIRE DEPARTMENT. IN A WRITTEN STATEMENT PROVIDED AT THE TIME OF DONATION, JESSE KURTZ, DEPUTY CHIEF – SUPPORT SERVICES (RETIRED), EXPLAINED THAT THIS NOZZLE WAS “USED TO PUT WATER ON THE OTHER SIDE OF A WALL, FLOOR, OR CEILING. ALSO USED TO PUT WATER INSIDE OF A HAYSTACK.” IN THE SUMMER OF 2015, COLLECTIONS TECHNICIAN KEVIN MACLEAN, CONDUCTED A SERIES OF INTERVIEWS WITH CURRENT AND FORMER MEMBERS OF THE FIRE DEPARTMENT, INCLUDING: CLIFF “CHARLIE” BROWN (HIRED IN 1966, RETIRED 2004) AND TREVOR LAZENBY (HIRED IN 1994). BROWN EXPLAINED SAYING: “IT HAS A METAL PROBE ON ONE END OF IT WITH LITTLE HOLES DRILLED INTO IT. MOSTLY WE USED IT FOR BALE FIRES, JAMMING IT INTO THE HAYSTACK OR BALE … ONCE IN A WHILE, WE’D USE IT FOR INSIDE A WALL, BUT VERY SELDOM.” LAZENBY ADDED: “THIS PIECE OF EQUIPMENT … HAS A NUMBER OF NAMES … IT’S BEEN CALLED ANYTHING FROM A CELLAR NOZZLE … TO AN ATTIC NOZZLE, TO A PIERCING NOZZLE … THE POINT ON THE END OF THIS WAS ACTUALLY QUITE SHARP, AND IF YOU WANTED TO, IF YOU HAD AN ATTIC FIRE, YOU COULD EASILY POKE THIS FROM BELOW UP THROUGH YOUR DRYWALL AND YOUR INSULATION … AND THERE WERE A BUNCH OF SMALL HOLES DRILLED INTO THE VERY END SO THAT WHEN YOU DID OPEN IT, THE WATER WOULD COME OUT IN A FOG PATTERN.” HE CONTINUED, SAYING: “THE ADVANTAGE OF THAT IS THAT YOU DIDN’T NECESSARILY HAVE TO PULL THE CEILING DOWN … YOU COULD DO SOME SUPPRESSION UP THERE BEFORE YOU DECIDED TO PULL THAT CEILING DOWN AND SORT OF MAKE CONDITIONS BETTER BEFORE YOU EXPOSED YOURSELF TO THEM. SO FOR THE ATTIC USE, IT WORKED REALLY, REALLY WELL FROM WHAT I HEARD. I’VE NEVER DEPLOYED ONE OF THESE IN THAT SITUATION.” LAZENBY EXPLAINED FURTHER: “THE OTHER USE … IF YOU GOT TO A STRUCTURE AND THE BASEMENT WAS ON FIRE, SAME IDEA, JUST DIFFERENT DIRECTION … IF YOU SHOVED THE NOZZLE DOWN AND OPENED IT UP, YOU’RE GETTING AUTOMATIC SUPPRESSION BEFORE YOU SENT A TEAM DOWN THERE INTO THAT ATMOSPHERE. I WAS EVEN TOLD THAT YOU COULD USE THESE ON AN ENGINE FIRE … SOME OF THESE WERE BUILT WITH A STRIKING SECTION ON THEM SO THAT IF YOU HAD A HAMMER YOU COULD HIT THE TOP OF IT – THIS WOULD ACTUALLY PIERCE THE HOOD OF THE VEHICLE, ENTER THE ENGINE COMPARTMENT, YOU COULD TURN THE NOZZLE ON, AND IT WOULD SUPPRESS THE FIRE WITHOUT EVER HAVING TO LIFE THE HOOD. … I DON’T THINK THAT WE EVER USED THIS TOOL MAYBE AS OFTEN AS WE SHOULD HAVE. I THINK THAT WE, AT TIMES, COULD HAVE MADE BETTER USE AND ACTUALLY MADE CONDITIONS A LITTLE BIT BETTER FOR OURSELVES BEFORE WE PUT OURSELVES INTO THAT SPACE OR ATMOSPHERE.” WHEN ASKED IF THIS TYPE OF NOZZLE IS STILL IN USE, LAZENBY REPLIED: “WE HAVE ONE OF THESE ON OUR ENGINE DOWNTOWN … OURS BREAKS DOWN INTO A COUPLE OF PIECES SO IT STORES EASIER … BUT FUNDAMENTALLY IT’S THE SAME TOOL, SLIGHT MODIFICATIONS FOR EASE OF USE, BUT YEAH, THEY’RE STILL AROUND.” SEE PERMANENT FILE FOR FULL INTERVIEW TRANSCRIPTS AND ADDITIONAL INFORMATION ABOUT THE LETHBRIDGE FIRE DEPARTMENT.
Catalogue Number
P20150010006
Acquisition Date
2015-02
Collection
Museum
Images
Less detail
Other Name
FOLDING CHAIR STRETCHER
Date Range From
1970
Date Range To
2010
Material Type
Artifact
Materials
METAL, VINYL, NYLON
Catalogue Number
P20150010023
  1 image  
Material Type
Artifact
Other Name
FOLDING CHAIR STRETCHER
Date Range From
1970
Date Range To
2010
Materials
METAL, VINYL, NYLON
No. Pieces
4
Height
14.4
Length
221.5
Width
51.2
Description
EMERGENCY FOLDING CHAIR STRETCHER. ADJUSTABLE, MEDIUM BURGUNDY COLOURED VINYL WITH SILVER COLOURED METAL, AND FOUR BLACK RUBBER WHEELS. OUTER RECTANGULAR FRAME WITH A SMALLER, ADJUSTABLE FRAME WITHIN. STRETCHER HAS THREE STRAPS: TWO WINE COLOURED NYLON SEATBELT STYLE STRAPS, WITH METAL AND BLACK PLASTIC BUCKLES, ON THE UPPER BODY. BLACK PLASTIC BUCKLE AT CHEST HEIGHT HAS "FERNO" IN GREY. THIRD BUCKLE IS A BLACK NYLON AND PLASTIC BUCKLE, ON THE LOWER BODY. BACK OF PLASTIC BUCKLE IS EMBOSSED WITH "ACCULOC CSR-10 A.C.W. ASIA, WOONSOCKET RI". RED STICKER WITH WHITE WRITING ON RIGTH SIDE OF STRETCHER, AT WAIST AREA, READS "FERNO". TWO RUBBER FEET AT THE FOOT END OF STRETCHER TO STABILIZE STRETCHER WHEN FULLY EXTENDED. VINYL IS IN TWO PIECES AND CAN BE REMOVED FROM INNER FRAME. GOLD COLOURED ZIPPERS AND SILVER COLOURED SNAPS HOLD VINYL IN PLACE. THERE ARE TWO GOLD ZIPPERS ON THE BACK OF THE FOOT PORTION, BOTH RUNNING VERTICALLY. THERE ARE ALSO TWO GOLD ZIPPERS ON THE BACK OF THE UPPER BODY PORTION, WITH ONE RUNNING HORIZONTALLY AND ONE VERTICALLY. METAL LABEL RIVETED ONTO FRAME AT FOOT OF STRETCHER READS "FERNO - WASHINGTON, INC. WILMINGTON, OHIO, U.S.A. SERIAL NUMBER 07-052255." FOUR FOLDABLE HANDLES, TWO AT HEAD AND TWO AT FEET. HANDLES HAVE TEXTURED BLACK PLASTIC GRIPS. GRIPS EMBOSSED WITH "HUNTWILDE CORPORATION". LOWER HANDLES (AT FOOT) HAVE METAL CYLINDERS THAT SLIDE OVER THE JOINT TO PREVENT HANDLES FROM FOLDING BACK IN. CROSSBAR AT KNEE AREA HAS A SMALL RECTANGULAR PIECE THAT SWINGS OUT AND ONTO A BOLT WHEN STRETCHER IS FOLDED INTO SITTING POSITION, WHICH PREVENTS STRETCHER FROM GOING BACK TO A LAYING DOWN POSITION. UPPER BODY PORTION CAN BE ADJUSTED TO FOUR DIFFERENT POSITIONS: LAYING TOTALLY FLAT TO SITTING AT AN APPROXIMATELY 45 DEGREE ANGLE. AT SHOULDER AREA ON RIGHT SIDE THERE IS A TRIANGULAR SHAPED CLIP, WHICH RELEASES THE UPPER BODY PORTION AND ALLOWS IT TO BE ADJUSTED TO A SITTING POSITION. VERY GOOD TO EXCELLENT CONDITION. VINYL IS STRUCTURALLY VERY GOOD, WITH NO RIPS OR TEARS. SCUFF MARKS AND BLACK STAINS ALL OVER, ESPECIALLY ALONG THE EDGES. METAL FRAME IN VERY GOOD CONDITION. WHEELS AT THE FOOT ARE WORN MORE THAN THOSE AT THE HEAD.
Subjects
LAND TRANSPORTATION-HUMAN-POWERED
Historical Association
SAFETY SERVICES
History
THIS EMERGENCY FOLDING STRETCHER WAS USED BY THE LETHBRIDGE FIRE DEPARTMENT. IN A WRITTEN STATEMENT PROVIDED AT THE TIME OF DONATION, JESSE KURTZ, DEPUTY CHIEF – SUPPORT SERVICES (RETIRED), EXPLAINED THAT THE STRETCHER WAS “USED PRIMARILY IN AMBULANCES FOR MOVING PATIENTS DOWN STAIRS OR AROUND TIGHT CORNERS. WE USE A MORE STAIR FRIENDLY VERSION NOW.” IN THE SUMMER OF 2015, COLLECTIONS TECHNICIAN KEVIN MACLEAN, CONDUCTED A SERIES OF INTERVIEWS WITH CURRENT AND FORMER MEMBERS OF THE FIRE DEPARTMENT, INCLUDING: CLIFF “CHARLIE” BROWN (HIRED IN 1966, RETIRED 2004), TREVOR LAZENBY (HIRED IN 1994), RAYMOND “RAY” PETIT (HIRED 1965, RETIRED 1998), AND LAWRENCE DZUREN (HIRED 1959, RETIRED 1992). BROWN EXPLAINED: “IT WAS MORE OR LESS TO TAKE PEOPLE DOWN STAIRS. SIT THEM UP, STRAP THEM IN, HAD WHEELS ON IT. IT WAS FOR A PERSON THAT DIDN’T HAVE ANY SERIOUS INJURIES MORE OR LESS … IT WAS LIKE A LITTLE CHAIR, FOLD UP, SIT THEM DOWN … GO DOWN THE STAIRS ONE AT A TIME – THUNK, THUNK, THUNK, THUNK.” LAZENBY EXPANDED SAYING: “I HATED THIS STRETCHER. THIS WAS A FOLDING STRETCHER … ACTUALLY THE OLD STAIR-CHAIR, BASICALLY. THEY HAVE MODERNIZED AND IMPROVED THIS DRAMATICALLY. BUT THIS PUZZLE OF A STRETCHER – YOU USED TO BE ABLE TO SET IT UP SO THAT IT CAME INTO A CHAIR … ANY TIME YOU WENT UP INTO AN APARTMENT BUILDING THAT WAS UNDER THREE STORIES, THERE’S NO ELEVATOR, SO YOU SOMETIMES HAD TO CARRY PEOPLE DOWN THREE FLIGHTS OF STAIRS. THIS WAS THE CHAIR OF CHOICE A LOT OF TIMES, IT WAS THE STRETCHER OF CHOICE, BECAUSE IT WAS LIGHTER THAN THE OTHER ONE AND IT WAS EASIER TO MANEUVER AROUND CORNERS … IT WAS A PUZZLE TO PUT TOGETHER AND TO TAKE APART AND I JUST NEVER EVER – I HATED THIS THING. TO THIS DAY, WHEN THE PARAMEDICS SAY ‘WE’RE GONNA NEED THE STAIR CHAIR’, I GRIT MY TEETH AND I CRINGE A LITTLE BIT, I THINK BECAUSE I THINK OF THIS THING, EVEN THOUGH THE NEW ONE IS WAY BETTER. THIS WAS IN SERVICE WHEN I GOT HERE AND I WOULD SAY THAT THIS WAS IN SERVICE ON THE AMBULANCES UNTIL ABOUT … 7 YEARS AGO, GIVE OR TAKE. SO THE BETTER PART OF 15 YEARS THAT THAT WAS IN SERVICE WHILE I WAS HERE.” HE CONTINUED: “THE WORST PART ABOUT THIS IS THAT WHEN YOU PUT A PATIENT ON IT AND YOU LIFTED THEM UP TO GO DOWN THE STAIRS, IT FELT UNSTABLE ENOUGH FOR THEM THAT THEY ALWAYS WANTED TO PUT THEIR ARMS OUT, AND THE SECOND THAT THEY GRABBED ON TO SOMETHING, WELL THEN YOUR CENTRE OF GRAVITY IS LOST AND THEN YOU WERE REALLY IN IT. LIKE YOU THOUGHT, ‘GEEZ, WE COULD ACTUALLY DROP THIS GUY.’ BUT THAT’S WHAT I DISLIKED PROBABLY THE MOST ABOUT THIS THING, OUTSIDE OF HAVING TO PUT IT TOGETHER.” PETIT ADDED: “IF YOU GO TO THE BUILDINGS UP HERE ON LONDON ROAD, SOME TWO STORY BUILDINGS AND THE STAIRS ARE VERY NARROW AND VERY TIGHT, WE USED TO USE THIS TYPE. SO IN OTHER WORDS, INSTEAD OF PUTTING HIM ON A STRETCHER, YOU’D PUT HIM ON THE SEAT. ONE GUY GETS AT THE BACK AND ONE GUY GETS AT THE FRONT AND TAKE THE PERSON DOWN … OVER THE YEARS I GOT A BAD BACK AND GUESS WHERE I GOT THE BAD BACK FROM? IT WAS LIFTING, DOING THINGS LIKE THIS, BECAUSE IT WAS VERY CUMBERSOME.” DZUREN AGREED: “THAT’S JUST A CONFINED SPACE STRETCHER … YOU CAN’T [ALWAYS] GET THE BIG STRETCHER IN, SO YOU CAN PUT THEM ON THAT PARTICULAR ONE. IN AN ELEVATOR, YOU CAN’T GET THAT BIG ONE IN THERE. SOME OF THE ELEVATORS, THE RESIDENTIAL ONES, THEY DON’T, AT LEAST IN THE DAYS GONE BY, THEY DIDN’T THINK ABOUT HAVING TO ACCOMMODATE STRETCHERS. I WOULD PROBABLY SAY IT’S A RARE OCCASION THAT WE HAD TO USE THAT. CAUSE A LOT OF TIMES … IF THE PERSON WAS FAIRLY PHYSICALLY OKAY, YOU COULD TAKE HIM OUT, JUST HOLD HIM. ONE GUY BY THE ARMS, ONE GUY BY THE LEGS, WE HAD A TECHNIQUE THERE WHERE YOU COULD QUITE EASILY TAKE HIM OUT THAT WAY WITHOUT DOING HIM ANY HARM, YOU KNOW. IF HE HAD A BROKEN ARM, WELL, WE COULDN’T DO THAT, SO YOU’D HAVE TO USE ONE OF THOSE.” SEE PERMANENT FILE FOR FULL INTERVIEW TRANSCRIPTS AND ADDITIONAL INFORMATION ABOUT THE LETHBRIDGE FIRE DEPARTMENT.
Catalogue Number
P20150010023
Acquisition Date
2015-02
Collection
Museum
Images
Less detail
Other Name
HIGH VOLUME FIRE HOSE / PUMP LENGTH HOSE
Date Range From
1965
Date Range To
1985
Material Type
Artifact
Materials
NYLON, BRASS, RUBBER,
Catalogue Number
P20150010021
  2 images  
Material Type
Artifact
Other Name
HIGH VOLUME FIRE HOSE / PUMP LENGTH HOSE
Date Range From
1965
Date Range To
1985
Materials
NYLON, BRASS, RUBBER,
No. Pieces
1
Length
416.0
Width
38.3
Diameter
17.5
Description
SHORT HIGH VOLUME FIRE HOSE, ALSO KNOW AS PONY LENGTH OR PUMP LENGTH FIRE HOSE. SHORT, WIDE, RED FIRE HOSE. COUPLINGS ON EACH END OF HOSE. ON THE LARGER END (17.5CM DIAMETER) THE CHROME PLATED COUPLING HAS 10.4CM LONG HANDLES AND A STRIPE OF GREEN PAINT NEAR THE CONNECTION WITH THE HOSE. THE HOSE HAS BEEN TRIPLE CLAMPED ONTO THE COUPLING. ON THE OTHER END OF THE HOSE, THE DIAMETER IS 14.0CM, AND THE COUPLING HAS HANDLES THAT ARE 4.7CM LONG. THIS END OF THE HOSE IS ALSO TRIPLE CLAMPED ONTO THE COUPLING. ON EACH END OF THE HOSE, TWO OF THE CLAMPS ARE SMALLER AND ARE STAMPED WITH A REPEATING "* DENVER * COLORADO * USA * BAND * IT *" THE LARGEST CLAMPS, EACH FURTHEST FROM ITS RESPECTIVE COUPLING, STAMPED: "DIXON V. & C. CO. USA 525" ON EITHER SIDE OF THE TWO LARGE BOLT SETS. VERY GOOD OVERALL CONDITION. CHROME PLATING HAS WORN AWAY ON EDGES. LOTS OF SCRATCHES AND GOUGES IN THE METAL HANDLES OF THE COUPLINGS.
Subjects
REGULATIVE & PROTECTIVE T&E
Historical Association
SAFETY SERVICES
History
THIS HIGH VOLUME FIRE HOSE WAS USED BY THE LETHBRIDGE FIRE DEPARTMENT. IN A WRITTEN STATEMENT PROVIDED AT THE TIME OF DONATION, JESSE KURTZ, DEPUTY CHIEF – SUPPORT SERVICES (RETIRED), EXPLAINED THAT THIS HOSE WAS USED “WHEN A FIRE ENGINE NEEDED TO CONNECT TO A FIRE HYDRANT AND WAS PARKED RIGHT BESIDE THE HYDRANT. THIS WAS BEFORE WE CARRIED LARGER BUT LIGHTER HOSES ON THE TRUCKS.” IN THE SUMMER OF 2015, COLLECTIONS TECHNICIAN KEVIN MACLEAN, CONDUCTED A SERIES OF INTERVIEWS WITH CURRENT AND FORMER MEMBERS OF THE FIRE DEPARTMENT, INCLUDING: CLIFF “CHARLIE” BROWN (HIRED IN 1966, RETIRED 2004), TREVOR LAZENBY (HIRED IN 1994), AND LAWRENCE DZUREN (HIRED 1959, RETIRED 1992). BROWN EXPLAINED THAT “THIS WAS ONE OF YOUR MAIN PIECES OF EQUIPMENT WHEN YOU WENT TO A FIRE … WE’D HOOK THIS [THE HOSE] TO THE HYDRANT, AND THEN THIS INTO OUR PUMP, SO WE’D BE GETTING 8 INCHES OF WATER INTO OUR PUMP, AND THEN THE PUMP WOULD BOOST THAT LINE, AND WE COULD PUT UP 5 OR 6 LINES … THIS WAS ONLY USED AT LARGE FIRES … WHEN WE HAD TO USE THIS, THERE WAS BIG TROUBLE.” LAZENBY ADDED: “IF THIS WAS IN SERVICE WITH OUR DEPARTMENT, THIS WAS IN SERVICE BEFORE I GOT ON, SO I DON’T KNOW THAT I’VE EVEN EVER ACTUALLY SEEN ONE OF THESE, TO BE HONEST WITH YOU.” DZUREN ELABORATED: “THAT’S WHAT WE WOULD HOOK UP ONTO FROM OUR HYDRANT TO THE PUMP. THE HYDRANT MAN, HE WOULD CONNECT THAT TO THE HYDRANT GATE, TO THE HYDRANT, AND THIS WOULD GO TO THE INPUT SIDE OF THE PUMPER. AND THEN THEY WOULD TURN ON THE WATER WITH THAT NOZZLE AND THEY WOULD SUPPLY WATER TO THE FIRE TRUCK AND HE COULD PUMP IT TO A MULTITUDE OF LINES THAT COME OFF OF THERE.” WHEN ASKED WHY FIREFIGHTERS WOULD WANT TO RUN THE WATER THROUGH THE PUMPER TRUCK, RATHER THAN JUST OFF THE HYDRANT, DZUREN EXPLAINED: “WELL, IF THE HYDRANT PRESSURE IS NOT HIGH ENOUGH TO ACCOMMODATE FIREFIGHTING, LIKE SAY IF OUR HOSE, IF A NOZZLE LIKE THAT, YOU’VE GOT TO HAVE UP TO A HUNDRED POUNDS IN THERE, A HYDRANT NORMALLY DOESN’T HAVE THAT KIND OF HIGH PRESSURE.” SEE PERMANENT FILE FOR FULL INTERVIEW TRANSCRIPTS AND ADDITIONAL INFORMATION ABOUT THE LETHBRIDGE FIRE DEPARTMENT.
Catalogue Number
P20150010021
Acquisition Date
2015-02
Collection
Museum
Images
Less detail
Other Name
PIKE HOOK
Date Range From
1970
Date Range To
1990
Material Type
Artifact
Materials
METAL, WOOD
Catalogue Number
P20150010008
  1 image  
Material Type
Artifact
Other Name
PIKE HOOK
Date Range From
1970
Date Range To
1990
Materials
METAL, WOOD
No. Pieces
1
Length
323
Width
11.5
Diameter
4.2
Description
PIKE POLE. LONG, CYLINDRICAL WOODEN HANDLE, WITH A METAL HEAD. THE HEAD IS IN THE SHAPE OF A LOWER CASE 'R', WITH A STRAIGHT AND HOOKED POKER. TWO METAL RIVETS HOLD THE METAL HEAD ON THE WOODEN POLE. NO MARKINGS. FAIR TO GOOD CONDITION. METAL HAS RUSTED. WOOD IS WELL USED AND HAS SEVERAL GOUGES/SLIVERS MISSING. WOOD IS VERY DARK FROM USE. WOOD ESPECIALLY DARK AT JUNCTION WITH METAL HEAD.
Subjects
REGULATIVE & PROTECTIVE T&E
Historical Association
SAFETY SERVICES
History
THIS PIKE POLE WAS USED BY THE LETHBRIDGE FIRE DEPARTMENT. IN A WRITTEN STATEMENT PROVIDED AT THE TIME OF DONATION, JESSE KURTZ, DEPUTY CHIEF – SUPPORT SERVICES (RETIRED), EXPLAINED THAT IT WAS “USED TO PULL CEILINGS FROM BELOW DURING OVERHAUL. ALSO USED TO FORCE CEILINGS DOWN DURING VENTILATION. THE SAME TYPE OF TOOL IS IN USE TODAY.” IN THE SUMMER OF 2015, COLLECTIONS TECHNICIAN KEVIN MACLEAN, CONDUCTED A SERIES OF INTERVIEWS WITH CURRENT AND FORMER MEMBERS OF THE FIRE DEPARTMENT, INCLUDING: CLIFF “CHARLIE” BROWN (HIRED IN 1966, RETIRED 2004) AND TREVOR LAZENBY (HIRED IN 1994). BROWN EXPLAINED “THAT WAS PRETTY IMPORTANT … WHEN YOU HAD A FIRE, AND THE FIRE WAS STILL GOING, BUT MOST OF IT WAS OUT, THE CEILINGS – IF YOU DIDN’T KNOW IF THE FIRE WAS OUT IN THE CEILING, YOU’D TAKE THE PIKE POLE, AND YOU CAN SEE HOW YOU WOULD POKE IT IN … THAT WAS A VERY DESTRUCTIVE TOOL, YOU COULD DO A LOT OF DAMAGE WITH THAT. BUT IF THERE WAS SOMETHING THAT YOU HAD TO GET INTO THE CEILING TO CHECK, AND WE’D OPEN A HOLE IN THE CEILING TO GET UP ON THE LADDER TO LOOK … POKING AROUND TO MAKE SURE THE FIRE WAS OUT.” LAZENBY ADDED: “THIS IS PROBABLY AS CLASSIC A TOOL, A HAND TOOL, AS MAYBE THE PICK HEADED AXE … AS FAR AS FIREFIGHTING GOES. THIS IS A GREAT SALVAGE AND OVERHAUL TOOL … IF YOU HAD A FIRE GO UP INSIDE THE WALLS AND YOU THOUGHT MAYBE THERE WAS FIRE IN THE ATTIC, YOU WOULD NEED TO PULL DOWN THE PLASTER BOARD OR THE LATH OR THE DRYWALL TO … DO A VISUAL INSPECTION OF THAT SPACE.” HE CONTINUED, EXPLAINING ITS USE: “THE POINTY END WAS PERFECT FOR BREAKING THROUGH THE DRYWALL AND ONCE YOU MADE THAT INCISION, FOR LACK OF A BETTER TERM, IF YOU TURNED IT NINETY DEGREES, NOW ALL OF A SUDDEN, THE HOOK IS POINTING TOWARDS A FRESH PORTION OF THE DRYWALL AND AS YOU PULLED, IT WOULD COME DOWN IN RELATIVELY LARGE CHUNKS. AND YOU CAN OPEN UP A FAIR AMOUNT OF CEILING IN A SHORT TIME WITH THIS.” LAZENBY DESCRIBED THE DIFFERENCE BETWEEN THIS PIKE POLE AND MORE MODERN VERSIONS: “THE CONNECTION POINT BETWEEN THE METAL HEAD AND WOODEN HANDLE WOULD WEAKEN AND SOMETIMES THE HEADS WOULD ROCK A LITTLE BIT; THEY WERE TOUGH TO KEEP TIGHT, THEY WOULD RUST A LITTLE BIT. THEY’RE BEING MADE OUT OF DIFFERENT MATERIALS NOW, MOST NOTABLY, THE HANDLES HAVE GONE TO FIBERGLASS. THEY DON’T CONDUCT ELECTRICITY WELL, WHICH IS GOOD. NEITHER DID THE WOOD, BUT AGAIN, NO SPLINTERS, NO SLIVERS, THAT KIND OF THING.” HE REITERATED THE IMPORTANCE OF THIS TOOL: “IT’S ANOTHER GO-TO TOOL FOR US: AXE, HALLIGAN, AND I WOULD SAY PIKE POLE ARE PROBABLY THE THREE MOST COMMONLY USED HAND TOOLS … AND ACTUALLY, IF YOU LOOK, MOST FIRE SERVICE BADGES THAT PEOPLE WEAR – YOU’VE GOT A PIKE POLE AND LADDER – THEY’RE SYNONYMOUS WITH THE FIRE SERVICE.” SEE PERMANENT FILE FOR FULL INTERVIEW TRANSCRIPTS AND ADDITIONAL INFORMATION ABOUT THE LETHBRIDGE FIRE DEPARTMENT.
Catalogue Number
P20150010008
Acquisition Date
2015-02
Collection
Museum
Images
Less detail
Other Name
SELF-CONTAINED BREATHING APPARATUS / AIR MASK AND HARNESS
Date Range From
1975
Date Range To
2000
Material Type
Artifact
Materials
PLASTIC, METAL, COTTON
Catalogue Number
P20150010017
  2 images  
Material Type
Artifact
Other Name
SELF-CONTAINED BREATHING APPARATUS / AIR MASK AND HARNESS
Date Range From
1975
Date Range To
2000
Materials
PLASTIC, METAL, COTTON
No. Pieces
5
Height
29.2
Length
68.8
Width
50.7
Description
SELF-CONTAINED BREATHING APPARATUS, INCLUDES CASE, HARNESS ASSEMBLY, MASK WITH STRAP, AND PAPER PASS CERTIFICATE. .A: CASE. BLACK MOULDED, TEXTURED PLASTIC CASE. ROUGHLY RECTANGULAR SHAPED. HINGED AT THE BACK, CASE HAS THREE HANDLES ON THE FRONT: ONE IS IN THE CENTRE OF THE CASE, WITH THE OTHER TWO ARE ON THE CORNERS OF THE BOX. THERE ARE TWO PLASTIC LATCHES BETWEEN THE THREE HANDLES. BLACK AND SILVER COLOURED STICKER ON THE TOP OF THE BOX READS: "MSA AIRMASK". A SECOND BLACK AND SILVER STICKER, ABOVE ONE OF THE LATCHES, READS: "ULTRALITE PRESSURE DEMAND" AND ALSO HAS "PASS IN BOX" HANDWRITTEN IN BLACKMARKER. A THIRD BLACK AND SILVER STICKER THAT READS "MSA AIRMASK" IS ON THE BOTTOM OF THE BOX. YELLOW PIECE OF DUCT TAPE ON RIGHT SIDE, HANDWRITTEN IN BLACK INK: "ULTRALITE BMR". INSIDE THE BOX IS SUBDIVIDED INTO COMPARTMENTS. AFFIXED TO THE INSIDE TOP OF THE LID IS A PAGE OF INSTRUCTIONS TITLED "MSA AIR MASK, PRESSURE DEMAND TYPE". A SMALL PIECE OF PAPER AFIXED TO THE INSIDE OF THE LID IS TITLED "PACKING ARRANGEMENT" AND HAS AN ILLUSTRATION OF HOW THE UNIT SHOULD BE PACKED AWAY. DIMENSIONS PROVIDED ABOVE CORRESPOND TO THIS CASE. OVERALL IN FAIR TO GOOD CONDITION. THE TWO "MSA AIRMASK" STICKERS HAVE PARTIALLY PEELED AWAY, WITH THE TOP STICKER MISSING THE BOTTOM OF "ASK" IN "MASK" AND WITH THE BOTTOM STICKER MISSING PARTS OF THE "MSA": THE "M" AND "A" ARE PARTIALLY MISSING, WHILE THE "S" IS ENTIRELY GONE; "MASK" OF THIS STICKER IS ALSO VERY DAMAGED. LATCH BELOW THE "ULTRALITE" STICKER IS IN GOOD CONDITION, WHILE THE OTHER IS PARTIALLY BROKEN. SEVERAL SCUFFS AND SCRATCHES IN THE PLASTIC, ESPECIALLY ALONG THE BOTTOM. .B: HARNESS ASSEMBLY. BLACK PLASTIC, METAL, AND FABRIC WITH SILVER COLOURED METAL. OUTER PORTION OF HARNESS DESIGNED TO HOLD BOTTLE OF COMPRESSED AIR. BLACK METAL BRACKET RUNS VERTICALLY UP AND DOWN THE HARNESS AND HAS A SILVER COLOURED CIRCULAR METAL BAND TO HOLD TANK IN PLACE. THE SILVER BAND IS 7.7CM WIDE AND HAS TWO BLACK STICKERS WITH “MSA” IN YELLOW STUCK ON. BOTTOM OF BLACK METAL BRACKET HAS A TRIANGULAR SHAPED PIECE, WITH A ROUND RUBBER TIP, TO HOLD THE BOTTOM OF THE AIR TANK IN PLACE. BELOW SILVER BAND IS A STICKER, WITH A DISCOLOURED WHITE BACKGROUND AND BLACK LETTERS GIVING INSTRUCTIONS FOR USE, ENTITLED: “CUSTOM 4500/ULTRALITE BELT MOUNTED SCBA. OPEN CIRCUIT, PRESSURE-DEMAND ENTRY AND ESCAPE SELF-CONTAINED BREATHING APPARATUS OR COMBINATION SELF-CONTAINED BREATHING APPARATUS AND TYPE C SUPPLIED AIR RESPIRATOR.” SILVER BAND FOR TANK HAS A HANDLE THAT EXPANDS AND CONTRACTS THE BAND, TO ALLOW FOR REMOVAL AND INSTALLATION OF AIR TANK. AT THE TOP OF THE BLACK METAL BRACKET, THERE IS A CIRCULAR SECTION WHICH ALLOWS FOR THE ATTACHMENT OF TWO BLACK PADDED FABRIC SHOULDER STRAPS. THESE STRAPS ARE BOLTED ON WITH BLACK AND SILVER COLOURED BOLTS. BLACK METAL BRACKET ATTACHES AT WAIST AREA TO BLACK MOULDED PIECE OF PLASTIC. BLACK MOULDED PLASTIC FITS AROUND THE HIP AREA OF THE WEARER. SHOULDER STRAPS COME DOWN FROM TOP OF METAL BRACKET AND ATTACH TO THIS BLACK PLASTIC JUST ABOVE THE HIP. SHOULDER STRAPS ARE PADDED AND HAVE A SECOND SMALLER STRAP, WHICH WOULD CROSS THE WEARER’S CHEST WITH A BLACK SIDE RELEASE PLASTIC BUCKLE, WITH THE FEMALE COMPONENT ON THE RIGHT STRAP. ON EACH STRAP BELOW THE PLASTIC BUCKLE IS A SILVER COLOURED “D” RING. ABOVE THE BUCKLE ON EACH STRAP IS A SILVER COLOURED SILK SCREEN SECTION WITH “MSA”. AT THE BOTTOM WAIST PORTION OF THE MOULDED PLASTIC IS ANOTHER BLACK FABRIC STRAP, TO GO AROUND THE WEARER’S WAIST. THE BELT ATTACHES WITH A SILVER COLOURED METAL LATCH PLATE ON THE RIGHT SIDE, WHICH FITS INTO A BLACK PLASTIC BUCKLE, WITH A BLACK PLASTIC BUTTON TO RELASE, ON THE WEARER’S LEFT SIDE. ATTACHED TO THE LEFT SIDE OF THE BELT IS A PRESSURE REGULATOR AND HIGH PRESSURE SUPPLY HOSE. THE PRESSURE REGULATOR CONSISTS OF BLACK METAL AND PLASTIC, AND GOLD AND RED COLOURED METAL. A CIRCULAR GOLD COLOURED METAL PIECE HAS REMNANTS OF TWO STICKERS ON ITS FACE: “MSA AIR MASK – MFD BY MINE SAFETY APPLIANCES COMPANY – PITTSBURGH, PENNSYLVANIA – PRESSURE DEMAND.” BELOW IT IS A HOSE COUPLING. THIS COUPLING HAS A BLACK RUBBER CAP, EMBOSSED WITH “FHR”. BESIDE THIS IS AN AIR PRESSURE GAUGE: BLACK METAL TEXTURED EDGE, GLASS FACE, AND RUBBER ENCASING. THE FACE OF THE GAUGE IS OFF-WHITE WITH A DIAL INCREASING IN INCREMENTS OF 5 (5, 10, 15, 20, 25, 30), WITH A RED SECTION FROM 0-5, A YELLOW SECTION BETWEEN 20 AND 25, AND A GREY SECTION AT 30. BELOW THE DIAL IS “PSI X 100 – USE NO OIL – MSA 18” BESIDE THE GAUGE IS A RED COLOURED METAL KNOB, WITH “ß OPEN – BY PASS” EMBOSSED ON FRONT FACE. BESIDE THIS RED KNOB IS A GOLD COLOURED KNOB WITH A SILVER COLOURED TAB “^PUSH^”. ON THE FACE OF THE GOLD KNOB, EMBOSSED, IS “MAIN LINE ^” WITH “MSA” IN CENTRE. OPPOSITIE THE PRESSURE GAUGE IS A HIGH PRESSURE SUPPLY HOSE. THE HOSE IS BLACK PLASTIC AND FABRIC. ON THE END OF THIS HOSE IS A SILVER COLOURED BELL, USED AS A LOW AIR ALARM. AT THE VERY END OF THE HOSE IS A BLACK TEXTURED METAL COUPLING. .C: MASK WITH HOSE. BLACK PLASTIC RESPIRATOR MASK WITH CLEAR PLASTIC VISOR. FITTED NOSE PIECE WITH TWO SMALL CIRCLES ON EITHER SIDE OF BRIDGE OF NOSE PIECE. EACH CIRCLE HAS BLACK PLASTIC SPOKES AND A TRANSPARENT FLAP, WHICH IS ON THE INSIDE OF THE NOSE PIECE. HANDWRITTEN IN GOLD COLOURED INK, ON THE INSIDE OF NOSE PIECE, “G29C” OR “929C”. FRONT OF NOSE PIECE, VISIBLE THROUGH THE VISOR, HAS “MEDIUM” EMBOSSED ONTO MASK. FIVE BLACK PLASTIC STRAPS WITH SILVER COLOURED BUCKLES ALLOW MASK TO BE SECURELY TIGHTENED ONTO THE HEAD. STRAPS MEET AT A ROUGHLY STAR-SHAPED PIECE THAT SITS AT THE BACK OF THE HEAD. THIS STAR-SHAPED PIECE HAS THE FOLLOWING EMBOSSED ONTO THE PLASTIC: “M2 C5 – MSA – PULL FRONT STRAP LAST – U”. ABOVE THE “M2 C5” IS AN EMBOSSED MULTI-SPOKED CIRCLE. EMBOSSED IN THE CENTRE OF THE CIRCLE: “93 – 94 – 95” EACH OF THE FIVE STRAPS ARE LABELLED; TWO AT THE BASE OF MASK, EACH LABELLED “NECK”, NEXT TWO UP ARE “SIDE”, AND THE FIFTH STRAP AT THE TOP OF THE MASK IS “FRONT”. ON FRONT OF MASK, AT THE MOUTH AREA, IS A LONG ACCORDION-STYLE HOSE. IT IS ATTACHED TO THE MASK WITH A SILVER COLOURED METAL CLAMP. ON THE NUT OF THIS CLAMP IS WRITTEN “ALL STAINLESS BREEZE”. BELOW IS A BLACK METAL BAND, WHICH IS STAMPED IN YELLOW WITH “-18 TINNERMAN”. BELOW THAT THERE IS A SILVER COLOURED METAL RING, WHICH HAS A BLACK FABRIC STRAP ATTACHED (SEE BELOW FOR DESCRIPTION OF THIS ITEM, P20150010017D). THE BOTTOM OF THE HOSE HAS A BLACK METAL BAND AND THEN A SILVER COLOURED, TEXTURED METAL PIECE TO CONNECT TO THE AIR SUPPLY CANISTER. BELOW THE HOSE CONNECTION, AT THE CHIN AREA OF THE MASK, IS A MEDIUM-LIGHT GREY CIRCLE, EMBOSSED WITH “MSA – U.S. PAT. 4,007,758”. TO THE RIGHT OF THE HOSE ATTACHEMENT HANDWRITTEN IN GREEN INK IS “#4”. ON THE RIGHT SIDE OF THE MASK, BETWEEN THE “NECK” AND “SIDE” STRAPS IS A FAINT STAMP IN YELLOW “7-212-“. EMBOSSED IN CENTRE OF MASK, ABOVE FACE VISOR, IS “MSA” IN A CIRCLE. INSIDE OF THE HOSE ATTACHMENT, BELOW THE MOULDED NOSE AREA, IS A BLACK DISK WITH HOLES IN IT. VISIBLE THROUGH THESE HOLES IS A PIECE OF GOLD-COLOURED METAL. DIMENSIONS OF MASK: HOSE IS 83.5CM LONG; VISOR IS 18CM WIDE. .D: STRAP ON MASK. BLACK FABRIC STRAP, WITH TWO BLACK SNAPS. SNAPS ONTO SILVER-COLOURED METAL RING AROUND THE HOSE. STRAP IS 92.5CM LONG AND 1.9CM WIDE. OVERALL CONDITION OF B, C, D: WELL WORN. ALL STICKERS SHOW SIGNS OF WEAR: DISCOLOURATION AND FINISH OF STICKERS SCRATCHED. STRUCTRUALLY IN GOOD CONDITION. MANY SCUFFS AND SCRATCHES ALL OVER. ALL FABRIC IN GOOD CONDITION. RUBBER RETAINS FLEXIBILITY AND PLASTICS ARE IN GOOD SHAPE WITH NO CRACKS. .E: PAPER PASS CERTIFICATE. GOLDENROD COLOURED PAPER. READS: "MSA - ULTRALITE DP - B.M.R. C/W FACEMASK. THIS UNIT TESTED AND HAD ACCEPTABLE PERFORMANCE ON SEPTEMBER 02, 2008. KEN HOBIAK" (WITH KEN'S SIGNATURE ABOVE HIS TYPED NAME). REVERSE OF PAPER: "THIS UNI PERFORM KEN H" (APPEARS TO HAVE MISPRINTED ON THIS SIDE). PAPER IS STANDARD LETTER SIZE. CONDITION IS GOOD: PAPER HAS BEEN CRUMBLED AND HAS A FEW SMALL TEARS AROUND THE OUTSIDE.
Subjects
MINING & MINERAL HARVESTING T&E
Historical Association
SAFETY SERVICES
History
THIS SELF-CONTAINED BREATHING APPARATUS (SCBA) WAS USED BY THE LETHBRIDGE FIRE DEPARTMENT. IN A WRITTEN STATEMENT PROVIDED AT THE TIME OF DONATION, JESSE KURTZ, DEPUTY CHIEF – SUPPORT SERVICES (RETIRED), EXPLAINED THAT THE MASK WAS “USED BY ALL FIREFIGHTERS TO CONNECT TO THE BELT MOUNTED REGULATOR SCBA TO ENTER HAZARDOUS ATMOSPHERES” AND THAT THE HARNESS WAS “USED BY ALL FIREFIGHTERS TO BREATH IN HAZARDOUS (SMOKY) ATMOSPHERES.” HE CONTINUED SAYING THAT THERE ARE “MORE MODERN MASK MOUNTED REGULATOR SCBAS [THAT HAVE BEEN] DEVELOPED AND PURCHASED.” IN THE SUMMER OF 2015, COLLECTIONS TECHNICIAN KEVIN MACLEAN, CONDUCTED A SERIES OF INTERVIEWS WITH CURRENT AND FORMER MEMBERS OF THE FIRE DEPARTMENT, INCLUDING: CLIFF “CHARLIE” BROWN (HIRED IN 1966, RETIRED 2004), TREVOR LAZENBY (HIRED IN 1994), AND LAWRENCE DZUREN (HIRED 1959, RETIRED 1992). BROWN EXPLAINED THAT THIS SCBA “WAS AN ON-DEMAND REGULATOR. THAT WAS NICE TO HAVE DEMAND, BECAUSE NO MATTER WHO IT WAS, THE HARDER YOU BREATHED, THE MORE AIR IT WOULD GIVE YOU. THE HARNESS IS PROBABLY MORE COMFORTABLE [THAN PREVIOUS ONES]. SOME GUYS WOULD USE THREE TANKS, SO THE HARNESS WAS A LITTLE BIT MORE COMFORTABLE FOR THEM. THEY’D COME OUT, THEY’D TURN AROUND, THEY WOULDN’T EVEN TAKE OFF THEIR GEAR. THEY’D TURN AROUND, THERE’D BE GUYS WHO WOULD TAKE THE TANK OFF, PUT ANOTHER TANK ON, HOOK IT ALL UP, A GOOD PAT ON THE BACK, AND BACK IN THEY’D GO WITH ANOTHER TANK. THEY’D DO THAT THREE TIMES BEFORE … THEY WERE JUST TOO TIRED … WE DIDN’T HAVE AN AIR COMPRESSOR TO FILL OUR OWN TANKS. I CAN’T REMEMBER WHERE THEY WENT. THEY MUST HAVE WENT TO THE SWIMMING POOL.” LAZENBY CONTINUED SAYING THAT THIS SCBA WAS “A VERY, VERY OLDER GENERATION SCBA BOTTLE. THESE WERE KIND OF RUDIMENTARY DESIGN. THE BOTTLE WAS STEEL ON THESE, WHICH MADE THEM VERY, VERY HEAVY. MODERN BOTTLES ARE FIBERGLASS WRAPPED WHICH MAKES THEM MUCH, MUCH LIGHTER; ADDED TO WHICH, IT HAD A BARELY PADDED HARNESS SYSTEM ON IT AND BASICALLY A GLORIFIED SEATBELT STRAP FOR A WAIST STRAP. SO WITH THESE KINDS OF THINGS, YOU DON’T WANT TO KEEP A TON OF WEIGHT ON YOUR SHOULDERS BECAUSE IT FATIGUES YOUR UPPER BODY VERY, VERY QUICKLY WHEN YOU’RE WORKING. BUT WITH THIS TYPE OF HARNESS ON THEM, IF YOU CINCHED THE WAIST UP REALLY TIGHT AND TOOK THE PRESSURE OFF YOUR SHOULDERS, THIS JUST SEEMED TO DIG INTO YOUR WAIST LIKE CRAZY, LIKE IT WAS VERY UNCOMFORTABLE TO WEAR … THAT BEING SAID, WHEN GUYS WENT TO THIS FROM LIKE THE CANISTERS THAT THEY USED TO WEAR, THIS MUST HAVE BEEN LIKE A NEW LEASE ON LIFE FOR THESE GUYS … I WORE THESE IN TRAINING – I DON’T THINK I EVER WORE ONE OF THESE BOTTLES ON AN ACTUAL FIRE CALL … WE HAD THE FIBERGLASS ONES IN FRONTLINE SERVICE WHEN I STARTED SO THIS WOULD BE PRE-1994, IF I’M NOT MISTAKEN. I DON’T THINK WE HAD THESE ON THE TRUCKS IN ’94. THEY WERE AROUND AND THEY WERE BACKUPS, BUT THEY WEREN’T FRONTLINE.” HE ELABORATED FURTHER, SAYING: “WE DIDN’T HAVE INDIVIDUAL MASKS; WE SHARED MASKS ON THE FIRE DEPARTMENT BACK THEN … THERE WASN’T ENOUGH MONEY FOR THEM TO BUY US OUR OWN INDIVIDUAL FACE PIECE … SO WHAT WE USED TO DO IS AFTER EVERY INCIDENT OR AFTER EVERY TIME YOU WORE ONE OF THESE THINGS, IT WOULD COME OFF THE TRUCK, WE WOULD HAVE A BOTTLE OF MSA MASK CLEANER THAT WE WOULD PUT INTO A TUB, WE WOULD MAKE A SOAPY WATER SOLUTION, WE WOULD WASH THE MASK, RINSE THE MASK, LET IT HANG TO DRY, AND THE NEXT PERSON WOULD USE IT AS THE NEXT SHIFT CAME ON.” HE ADDED THAT NOW EVERYONE IN THE DEPARTMENT HAS THEIR OWN MASK: “WE’VE HAD OUR OWN MASKS FOR 10-12 YEARS. WE STILL SHARE THE SCBAS AS FAR AS THE BOTTLE AND THE HARNESS GOES … THEY’RE IN THE RACKS ON THE TRUCK, IN THE BACKS OF THE SEATS AND DOWN IN BY THE HOSE OR THE PUMP COMPARTMENTS.” IN DISCUSSING WHY THIS MODEL IS NO LONGER USED, LAZENBY STATED: “THIS HOSE EASILY CRIMPED SO YOUR AIR SUPPLY COULD BE CUT OFF. THE AIR SUPPLY THAT NOW GOES FROM THE TANK TO YOUR MASK IS A MUCH MORE RIGID HOSE THAT, REALLY, YOU’D HAVE TO BASICALLY BEND IT IN HALF TO STOP THE FLOW OF AIR.” DZUREN ADDED FURTHER: “PRIOR TO [THIS] OUR BREATHING APPARATUS WAS WHAT THEY CALLED A CANISTER TYPE OF BREATHING APPARATUS … IT WAS JUST A CANISTER THAT YOU HAD IN FRONT OF YOU HERE AND IT WAS LAYERS OF … GEL, AND SAND, AND SILICA … THERE WAS A SHELF-LIFE WITH THOSE THINGS. IF YOU USED THEM, YOU PRETTY WELL HAD TO DISCARD THEM AFTER YOU USED THEM.” WHEN ASKED WHEN THIS TYPE OF SCBA CAME INTO SERVICE, DZUREN STATED: “I WOULD PROBABLY SAY MAYBE IN THE ‘70S SOMETIME? … I RECALL GUYS GOING IN WHEN WE JUST HAD THOSE CANISTERS. THEY WOULD GO WITHOUT ANYTHING. AND THEY WOULD COME OUT AFTER A WHILE AND THEY WOULD BE BARFING THEIR GUYS OUT … IT SEEMED TO BE, EVEN PRIOR TO MY TIME, WHEN THE STORIES I HEARD FROM GUYS THERE LONGER THAN MYSELF, THAT SEEMED TO BE THE MACHO THING. GET IN THERE AND THEY’D GET IN THERE WITHOUT A MASK. BUT EVENTUALLY, YOU KNOW, BETTER THINKING CAME ALONG AND SAID ‘DON’T BE SILLY, GET SOME STUFF ON THERE.’ BUT ONCE THEY GOT IT, AND THEY STARTED TO USE IT, YOU DID FEEL A LOT BETTER GOING IN, ‘CAUSE PRIOR TO USE GETTING THAT WE HEARD THE HORROR STORIES OF GUYS WHO DID SUCCUMB TO THE ELEMENTS BECAUSE OF ALL THOSE CANISTER TYPES, BUT ONCE THEY GOT [THIS SCBA] IT WAS BETTER.” SEE PERMANENT FILE FOR FULL INTERVIEW TRANSCRIPTS AND ADDITIONAL INFORMATION ABOUT THE LETHBRIDGE FIRE DEPARTMENT.
Catalogue Number
P20150010017
Acquisition Date
2015-02
Collection
Museum
Images
Less detail

8 records – page 1 of 1.