Skip header and navigation

3 records – page 1 of 1.

Date Range From
1980
Date Range To
2010
Material Type
Artifact
Materials
WOOD, INK
Catalogue Number
P20140032001
  2 images  
Material Type
Artifact
Date Range From
1980
Date Range To
2010
Materials
WOOD, INK
No. Pieces
1
Height
8.9
Length
90.7
Width
2.5
Description
RECTANGULAR WOODEN SIGN WITH THE RIGHT EDGE COMING TO A POINT AT END (LIKE AN ARROW). "BELLY RIVER STATION' PAINTED IN BLACK, BLOCK LETTERS. LETTERS ARE SLIGHTLY RAISED FROM SURFACE. THE WOOD IS WEATHERED AND GREY IN COLOUR. APPROX. 8 NAIL HOLES AT CENTER WITH SEVERAL OTHER, SMALLER HOLES AND NOTCHES OVER THE SURFACE OF SIGN. CONDITION: NAIL HOLES ARE RUST-STAINED. DIRT STAINS ON BOTTOM CENTER. SECTION OF WHITE PAINT ON BACK. BLACK PAINT OF LETTERS HAVE MODERATE TO SEVERE FADING.
Subjects
VISUAL COMMUNICATION T&E
Historical Association
TRANSPORTATION
History
A NOTE WRITTEN BY THE DONOR, FRANK LIGHTBOUND, AND PROVIDED TO THE MUSEUM AT THE TIME OF DONATION STATES: “[SIGN] DISCOVERED AT THE JUNCTION OF TWO OLD TRAILS IN THE PIKE HAVEN AREA SOUTHWEST OF CARDSTON ADJACENT TO WATERTON PARK. THIS AREA WAS AT ONE TIME PART OF WATERTON LAKES NATIONAL PARK. AT THE TIME OF DISCOVERY, EARLY 1980S, I WAS EMPLOYED AS A RANGER WITH THE ALBERTA FOREST SERVICE IN THE CROWSNEST FOREST. HAVING WORKED ON A TRAIL CREW AND A SEASON MANNING THE SOFA MTN. FIRE LOOKOUT IN THE EARLY 1950S, I WAS FAMILIAR WITH THE OLD WARDEN STATION AND THE BELLY RIVER DISTRICT. THE STATION AND THE LOOKOUT NO LONGER EXIST.” ON 22 MARCH 2017, GALT COLLECTIONS TECHNICIAN KEVIN MACLEAN INTERVIEWED LIGHTBOUND ABOUT HIS DONATION OF THE SIGN. THE FOLLOWING INFORMATION HAS BEEN EXTRACTED FROM THE INTERVIEW: LIGHTBOUND EXPLAINED THAT THE ARTIFACT WAS IN HIS POSSESSION FOR “PROBABLY 30 YEARS, [WHERE] IT WAS DISPLAYED IN [HIS] LIVING ROOM IN FRONT OF THE FIRE PLACE.” ABOUT HOW HE CAME INTO POSSESSION OF THE SIGN, LIGHTBOUND SAID, “WELL, I HAD SPENT SOME TIME WORKING IN WATERTON PARK, AND AT ONE POINT I SPENT A SUMMER ON THE SOFA MOUNTAIN LOOKOUT WHICH IS IN THE BELLY RIVER DISTRICT. AND AT THE TIME I CAME ACROSS THIS SIGN I WAS WITH THE ALBERTA FOREST SERVICE, DOING SOME WORK IN THE POLL HAVEN REGION SOUTHWEST OF CARDSTON." "AT ONE TIME, I THINK BACK IN THE EARLY 1900S, THAT POLL HAVEN AREA WAS INCLUDED INSIDE OF THE WATERTON PARK BOUNDARIES—IT WAS PART OF THE PARK. AND I WAS DOING SOME WORK IN THERE, AND I CAME TO AN OLD TRAIL WHERE THERE WAS ALL WINDFALL AND TREES DOWN ALL OVER IT, AND I NOTICED ONE TREE HAD A SIGN ATTACHED TO IT. IT WAS FACING DOWN, I GOT CURIOUS AND I WENT OVER THERE AND PRIED IT OFF THE TREE. AND HERE IT WAS AN OLD SIGN POINTING THE TRAIL TO THE BELLY RIVER RANGER STATION. AND SO, AT THAT POINT, THEY WERE MAKING USE OF TRAILS IN THE POLL HAVEN AREA WHICH WAS, AS I SAID, PART OF WATERTON LAKES NATIONAL PARK AND THIS WAS POINTING TO THE NEAREST WARDEN STATION, [WHICH WAS ACTIVE] AT THE TIME… I GOT THE SIGN. [BUT THE TRAIL] WAS OBLITERATED.” LATER IN THE INTERVIEW, LIGHTBOUND STATED HE CAME ACROSS THE SIGN “PROBABLY IN THE EARLY ’80S.” A FOOTNOTE WRITTEN BY THE TRANSCRIBER AND WATERTON HISTORIAN, CHRIS MORRISON, STATES: “POLL HAVEN, A 16-SQUARE MILE PARCEL OF LAND, WAS LOCATED ON THE EXTREME EASTERN EDGE OF THE PARK. IT WAS PART OF THE GOVERNMENT’S 1914 ENLARGEMENT OF WATERTON. IT WAS WITHDRAWN FROM PARK BOUNDARIES IN 1947 BY ACT OF PARLIAMENT TO PERMIT A LAND EXCHANGE WITH THE PROVINCE OF ALBERTA TO ALLOW THE EXPANSION ELK ISLAND NATIONAL PARK TO THE NORTH. THE NAME POLL HAVEN IS STILL IN USE AND IS A COMMUNITY PASTURE FOR LOCAL RANCHERS.” LIGHTBOUND DESCRIBED HIS JOB ACTIVITIES BY SAYING, “[IN THE] FOREST SERVICE, THERE’S NUMEROUS ACTIVITIES GOING ON IN DIFFERENT DISTRICTS AND AT THAT POINT… I WAS... CHECKING THE TIMBER PERMITS AND THE GRAZING ACTIVITY. BUT ALSO, THERE’S FIRE CONTROL OF COURSE, YOU’RE ALWAYS LOOKING FOR SMOKE POPPING OUT SOMEWHERE. AND WE WERE ASSISTING FISH AND WILDLIFE AND THAT PRETTY WELL COVERS THAT AREA DOWN IN THERE. I WAS POSTED IN BLAIRMORE IN THE CROWSNEST PASS AT THE TIME, SO I DIDN’T GO OUT THERE VERY OFTEN… I DROVE OUT THERE FROM BLAIRMORE OF COURSE AND I PARKED THE TRUCK AND WAS ON FOOT AFTER THAT… " WHEN ASKED IF HE ENJOYED HIS JOB, LIGHTBOUND REPLIED, “OH I SURE DID! ... [I ENJOYED] BEING OUTDOORS MOST OF THE TIME, AND THE PHYSICAL ACTIVITY AND QUITE OFTEN YOU’RE A LONG WAYS FROM THE OFFICE, SO NOBODY WAS TELLING YOU WHAT TO DO… I STARTED BACK IN THE EARLY ’50S, AND I WAS STILL THERE IN 1985.” LIGHTBOUND SPOKE TO WHY HE CHOOSE TO COLLECT THE SIGN FROM THE TREE: “WELL, I KNEW WHY IT WAS THERE, WHY IT HAD BEEN PUT THERE, AND IT MEANT SOMETHING TO ME. AND I THOUGHT IF I DON’T RESCUE THIS SIGN, IT’LL JUST BE THERE UNTIL IT ROTS, BECAUSE NOBODY ELSE IS GOING TO CLAMBER THROUGH ALL THIS DEADFALL LOOKING FOR IT… IT WAS KIND OF A REMINDER OR SOUVENIR OF MY DAYS OUT THERE.” THINKING ABOUT THE HISTORY WITH THE SIGN, LIGHTBOUND CONTINUED, “WELL, I WONDERED HOW LONG IT HAD BEEN THERE. I KNEW THAT THE POLL HAVEN AREA HAD BEEN INCLUDED IN THE PARK AT ONE TIME ALTHOUGH I WASN’T AWARE OF THE DATES. AND IT CROSSED MY MIND TOO, I WONDERED HOW MANY TRAVELERS HAD COME ALONG ON HORSEBACK OR WITH THEIR PACKHORSES AND WHAT HAVE YOU, HEADING FOR WATERTON LAKES PARK AND WONDERING WHEN THEY’D COME ACROSS A LITTLE BIT OF CIVILIZATION. AND HERE WAS SOMETHING TO ENCOURAGE THEM.” OF THE HISTORY OF BELLY RIVER STATION, MORRISON NOTES, “THE FIRST BELLY RIVER WARDEN STATION WAS BUILT IN 1917 AND WAS CONNECTED TO PARK HEADQUARTERS BY TELEPHONE. A WARDEN STATION CONTINUED TO SERVE THE AREA THROUGH TO THE EARLY 1970 WHEN OUTLYING WARDEN RESIDENCES WERE DISCONTINUED AND WARDENS WERE MOVED INTO THE TOWN SITE. THE DATES OF THE TRAILS TO THIS SITE IS NOT RECORDED IN THE WLNP [WATERTON LAKES NATIONAL PARK] ARCHIVES SPECIFICALLY BUT THE TRAILS WOULD HAVE BEEN BUILT (OR IMPROVED) AROUND 1917 FOR ACCESS TO THE STATION AND TO HAUL SUPPLIES FOR HUMANS AND HORSES. A ROUGH TOTE ROAD HAD BEEN BUILT NORTH TO MOUNTAIN VIEW YEARS BEFORE (NO DATE AVAILABLE) AND WAS USED AS A ROUTE TO GLACIER NATIONAL PARK, MONTANA. PLEASE SEE PERMANENT FILE FOR MORE INFORMATION INCLUDING FULL, ANNOTATED INTERVIEW TRANSCRIPTION AND DONOR’S NOTE.
Catalogue Number
P20140032001
Acquisition Date
2014-08
Collection
Museum
Images
Less detail
Date Range From
1970
Date Range To
2015
Material Type
Artifact
Materials
METAL, RUBBER
Catalogue Number
P20150010002
  1 image  
Material Type
Artifact
Date Range From
1970
Date Range To
2015
Materials
METAL, RUBBER
No. Pieces
1
Height
5.6
Length
105.5
Width
27.0
Diameter
4.5
Description
LARGE METAL AND RUBBER BOLT CUTTERS. HANDLE GRIPS ARE 11.2CM LONG PIECES OF BLACK RUBBER. HANDLES ARE A MEDIUM RED, WITH A GREEN STRIPE NEAR THE BLADE ADJUSTMENT BOLTS. WRITTEN IN BLACK MARKER JUST BELOW ONE OF THE STRIPES OF GREEN: "P 4". EMBOSSED JUST ABOVE THIS MARKING IS "U.S. PAT. NO. 2910900". ON THE OPPOSITE SIDE OF THE HANDLE FROM THE "P 4" MARKING IS WHAT REMAINS OF A RECTANGULAR SILVER STICKER. ABOVE THIS STICKER, EMBOSSED IN AN OVAL: "HKP". ON THE OTHER HANDLE, ON THE SAME SIDE OF THE CUTTERS AS THE "HKP" IS EMBOSSED: "TOOL NO. 0590M". THE JAWS OF THE BOLT CUTTERS ARE BLACK AND BOTH SIDES OF THE JAWS ARE EMBOSSED WITH: 2 "HKP" IN AN OVAL AND 2 "NO. 5". STAMPED ON EACH SIDE OF THE JAWS, ONCE PER SIDE, IS "HC - CUTS HARD CHAIN 1/2 CAP". JUST BETWEEN THE JAWS AND BLADES, STAMPED INTO THE METAL, ON THE SAME SIDE AS THE "P 4" MARKING: "MADE BY H.K. PORTER INC. BOSTON, MASS 02143". ONE OF THE BOLTS NEAR THE BLADE, ON THE SILVER STICKER SIDE, IS STAMPED WITH "535X". EMBOSSED ON BOTH SIDES OF THE BLADE, NEAR THE TIP, "U.S. PAT." AND "PEND". OVERALL IN FAIR TO GOOD CONDITION. THE RED FINISH ON THE HANDLES HAS FLAKED OFF AND THERE ARE SECTIONS WHERE THE FINISH IS LOOSE. THE RUBBER HAND GRIPS ARE SCUFFED AND SCRATCHED ALL OVER. SOME RUST ON THE JAWS AND BLADE AREA.
Subjects
METALWORKING T&E
Historical Association
SAFETY SERVICES
History
THESE BOLT CUTTERS WERE USED BY THE LETHBRIDGE FIRE DEPARTMENT. IN A WRITTEN STATEMENT PROVIDED AT THE TIME OF DONATION, JESSE KURTZ, DEPUTY CHIEF – SUPPORT SERVICES (RETIRED), EXPLAINED THAT THEY WOULD BE “USED AT EMERGENCY SCENES TO CUT CHAINS OR PADLOCKS OFF DOORS OR FENCES TO GAIN ACCESS. SIMILAR, BUT LIGHTER [BOLT CUTTERS ARE] STILL USED TODAY.” IN THE SUMMER OF 2015, COLLECTIONS TECHNICIAN KEVIN MACLEAN, CONDUCTED A SERIES OF INTERVIEWS WITH CURRENT AND FORMER MEMBERS OF THE FIRE DEPARTMENT, INCLUDING: CLIFF “CHARLIE” BROWN (HIRED IN 1966, RETIRED 2004), TREVOR LAZENBY (HIRED IN 1994), RAYMOND “RAY” PETIT (HIRED 1965, RETIRED 1998), AND LAWRENCE DZUREN (HIRED 1959, RETIRED 1992). BROWN CALLED THEM “OUR FAVOURITE TOOL … THERE WERE A LOT OF PLACES THAT WE WENT, THE GATES WERE LOCKED, JUST HAD A CHAIN WITH A PADLOCK ON IT. YOU WOULDN’T EVEN THINK TWICE. THESE BOLT CUTTERS ARE FOUR FEET LONG AND HAD SUCH A FULCRUM ON IT – YOU’D JUST CUT THE CHAIN AND IN WE’D GO. WE WOULDN’T EVEN ASK PERMISSION IF IT WAS AN EMERGENCY; WE’D JUST CUT THEM AND IN WE’D GO. WE USED THE BOLT CUTTERS LOTS AND LOTS AND LOTS OF TIMES … WE TRIED NOT TO CUT THE PADLOCK IF WE DIDN’T HAVE TO, BECAUSE THE PADLOCK, THEY HAD A KEY FOR IT; BUT THE CHAIN, WE TRIED TO CUT IT BACK FAR ENOUGH THAT IF THEY HAD TO TAKE THE PADLOCK OFF, THEY COULD STILL USE THE CHAIN. WE TRIED NOT TO DO ANY MORE DAMAGE THAN NECESSARY, BECAUSE PEOPLE THAT WERE HAVING PROBLEMS, HAD ENOUGH DAMAGE WITHOUT US WRECKING MORE THAN NECESSARY.” LAZENBY ADDED: “WE ACTUALLY CARRY THREE SIZES OF THESE AND THIS LOOKS LIKE THE LONGEST … THESE ARE IN SERVICE TODAY AND I BELIEVE THESE WILL BE IN SERVICE FOR MANY, MANY YEARS TO COME.” PETIT AGREED, SAYING: “WE USED IT QUITE OFTEN … EVERY TRUCK HAD ONE … I PROBABLY USED IT 10-12 TIMES AT LEAST. AND IT WAS USUALLY IN THE INDUSTRIAL AREA WHERE THEY HAVE IT ALL FENCED.” DZUREN ALSO AGREED, EXPLAINING HOW USEFUL THE BOLT CUTTERS COULD BE: “EVEN INTO BUILDINGS, THAT SOME BUILDINGS HAD LOCKS ON THE OUTSIDE NATURALLY, SO TO GET IN THERE, RATHER THAN CAUSING TOO MUCH DAMAGE, IN THE OTHER WAY THEY WOULD CUT THE LOCK, OR THE CHAIN LINK, AND GET INTO THE ENCLOSURE OR BUILDING THAT WAY.” SEE PERMANENT FILE FOR FULL INTERVIEW TRANSCRIPTS AND ADDITIONAL INFORMATION ABOUT THE LETHBRIDGE FIRE DEPARTMENT.
Catalogue Number
P20150010002
Acquisition Date
2015-02
Collection
Museum
Images
Less detail
Other Name
LETHBRIDGE TRANSIT DIAMOND FARE BOX
Date Range From
1970
Date Range To
2012
Material Type
Artifact
Materials
STEEL, BRASS, PLASTIC
Catalogue Number
P20140018000
  1 image  
Material Type
Artifact
Other Name
LETHBRIDGE TRANSIT DIAMOND FARE BOX
Date Range From
1970
Date Range To
2012
Materials
STEEL, BRASS, PLASTIC
No. Pieces
1
Height
58.5
Length
16
Width
15
Description
CYLINDER WITH STEEL BASE BOLTED TO CLEAR PLASTIC CANISTER, TOPPED WITH ROUNDED ALUMINIUM CAP WITH BEVELED SLOT THAT OPENS INTO PLASTIC CANISTER WITH TWO TOOTHED, METAL, ANGLED FLAPS. BASE HAS TWO IRREGULAR METAL SHAPES EMERGING FROM ONE SIDE, AND A RED, WHITE, AND YELLOW LABEL STUCK TO THE OPPOSITE SIDE THAT READS “CASH FARES – PLEASE OBTAIN A TRANSFER WHEN PAYING FARE… L.A. TRANSIT…”. BASE BOTTOM IS STOPPED WITH BRASS PLUG, STAMPED WITH TEXT READING “DIAMOND MFG. CO. – KANSAS CITY, MO.” AND “47” HANDWRITTEN IN BLACK MARKER. GENERAL WEAR, NICKS IN METAL, CLOUDING OF PLASTIC, SCUFFS AND TEARS ON LABEL, TAPE RESIDUE ALONG BOTTOM EDGE. OVERALL GOOD CONDITION.
Subjects
LAND TRANSPORTATION-ACCESSORY
Historical Association
TRANSPORTATION
RETAIL TRADE
History
THIS FARE BOX WAS PRODUCED BY DIAMOND MANUFACTURING IN KANSAS CITY, MISSOURI, AND USED IN LETHBRIDGE TRANSIT BUSES BETWEEN 1970 AND 2012. ON APRIL 23, 2015, COLLECTIONS TECHNICIAN INTERVIEWED DIANE BOULTON, AN EMPLOYEE WITH LETHBRIDGE TRANSIT FROM 1975 TO 2014. BOULTON SAID: “I WAS A BUS DRIVER AND THEN WENT ON TO BECOME PART OF MANAGEMENT… [THIS TYPE OF FARE BOX] WAS IN SERVICE WHEN I STARTED WITH THE DEPARTMENT IN 1975 AND HAD PROBABLY BEEN IN SERVICE FOR MAYBE FIVE TO 10 YEARS [ALREADY]. IT IS CALLED A DIAMOND FARE BOX… IT WOULD BE MOUNTED ON A STANCHION NEXT TO THE DRIVER’S COMPARTMENT… IT’S A STAINLESS STEEL CYLINDER THAT IS OPEN… AND WE WOULD SLIDE A SOLID BRASS CYLINTER UP INSIDE OF IT THAT WAS A LOCKING MECHANISM FOR THE FARE BOX… THERE WAS A LOCKING MECHANISM ON [THE] FLANGE THAT WOULD LOCK IT IN PLACE AND [IT] REQUIRED A TWO-KEY SYSTEM TO GET IN AND OUT OF… AT THE TOP, IT’S AN OPEN CYLINDER, SO SOMEBODY COULD COME IN WITH A HANDFUL OF CASH AND… YOU ARE GOING TO GET MULTIPLE TYPES OF COINS… IT’S REALLY HARD TO COUNT THE PHYSICAL FARE… SO YOU’RE TAKING THE CUSTOMER ON THEIR HONESTY… THE DRIVERS [ALSO] HAD TO PHYSICALLY COUNT WHEN WE WERE DOING PASSENGER COUNTS TO TRY AND GET SOME SORT OF STATISTICAL ANALYSIS OF HOW MANY PEOPLE WERE RIDING, WHAT FARE CATEGORIES WERE RIDING… WITH THE ELECTRONIC FARE BOX [ADOPTED BY LETHBRIDGE TRANSIT IN 2012], IT TELLS EXACTLY WHEN IT’S GOT THE ALLOTTED FARE [AND] AT THE SAME TIME IT’S TAKING YOUR FARE, IT’S COUNTING YOU AS A PASSENGER… THE ELECTRONIC FARE BOX GIVES US A HUGE AMOUNT OF DATA, THAT VERY EASILY IT OBTAINED, WHILE THIS ONE WAS MORE ONEROUS… [ANOTHER REASON] THAT WE STARTED TO SWITCH OUT WAS THAT WE STARTED TO GET DIFFICULTY IN GETTING PARTS BECAUSE THE [DIAMOND] FARE BOX ITSELF WAS FAIRLY OLD.” BOULTON CONTINUED: “BECAUSE IT’S WHAT I USED ALL THE TIME [AS A BUS DRIVER] THERE’S SOME NOSTALGIA THERE… THE SIMPLICITY OF IT… AS THINGS CHANGE AND MOVE FORWARD… IT’S KINDA NEAT… I THINK WHEN I FIRST STARTED IT WAS… $0.65 FOR AN ADULT FARE, AND $0.25 OR $0.35 FOR 17 OR UNDER CHILD FARE, AND SENIORS HAD A PASS THAT THEY RODE FREE… THERE WAS THE ODD TIME WHERE PEOPLE WOULD TRY AND FIGURE OUT A WAY TO GET THE CYLINDER OUT OF A BOTTOM OF IT… AND OCCASIONALLY THE CYLINDERS WOULD FALL OUT IF [YOU] WERE IN A HURRY WHEN YOU WERE PUTTING THEM IN AND YOU DIDN’T QUITE GET THE LOCKING MECHANISM SHUT… YOU’D BE DRIVING DOWN THE ROAD AND ALL OF A SUDDEN, BOOM! THE CYLINDER WOULD DROP OUT OF THE BOTTOM… WE HAD 50-60 OF THE DIAMOND FARE BOXES [AND] THE ACTUAL COIN CYLINDERS THAT WENT UP INSIDE, WE PROBABLY HAD 120-150 OF THOSE BECAUSE, FOR EVERY [FULL] ONE YOU DROPPED OUT, YOU HAD TO PUT ANOTHER UP AND THEY WOULD GET DROPPED OUT AT NIGHT, SO THEY WOULDN’T GET OPENED UNTIL THE NEXT MORNING [FOR FARES TO BE COUNTED].” ACCORDING TO THE ARTICLE “DIAMOND FAREBOXES ARE FOREVER”, PUBLISHED IN FEBRUARY 2013 ON BUSRIDE.COM, DIAMOND MANUFACTURING HAS PRODUCED ROUND FAREBOXES FOR COIN FARES SINCE 1947. DIAMOND-BRAND FAREBOXES ARE USED BY TRANSIT SYSTEMS IN EVERY AMERICAN STATE, THROUGHOUT CANADA, AND IN MEXICO, VENEZUELA, BERMUDA AND GUAM. THE AVERAGE LIFESPAN OF A DIAMOND FAREBOX IS 30 YEARS, WITH LITTLE MAINTENANCE REQUIRED DUE TO THE SIMPLICITY OF THE DESIGN. SEE PERMANENT FILE FOR HARDCOPIES OF FULL INTERVIEW TRANSCRIPT AND ONLINE SOURCE MATERIAL.
Catalogue Number
P20140018000
Acquisition Date
2014-05
Collection
Museum
Images
Less detail