Skip header and navigation

6 records – page 1 of 1.

Date Range From
1980
Date Range To
2000
Material Type
Artifact
Materials
PLASTIC, STEEL, GLASS
Catalogue Number
P20180005000
  2 images  
Material Type
Artifact
Date Range From
1980
Date Range To
2000
Materials
PLASTIC, STEEL, GLASS
No. Pieces
1
Height
30.5
Length
57
Width
11.3
Description
CAMCORDER COMPRISED OF LENS, BETACAM DECK, AND COLOR CAMERA. BETACAM DECK AT BACK OF CAMERA IS TWO-TONE GREY WITH TWO PLUG-INS FOR “AUDIO IN, CH-1, CH-2” AND ONE PLUG-IN FOR “DC-IN, 12V”. BETACAM DECK HAS TWO BLACK SLIDE BUTTONS ON TOP LABELLED IN WHITE “EJECT” AND “REW”. BETACAM DECK HAS GREY METAL HANDLE AT TOP THAT FASTENS TO BETA CASSETTE DECK. BETACAM DECK HAS YELLOWED PLASTIC WINDOW ON SIDE TO VIEW INSIDE MECHANISMS; BELOW WINDOW IS GREEN, RED AND BLUE DECAL READING “45 NEWS, 45”. REVERSE SIDE HAS SILVER “POWER ON/OF” SWITCH ABOVE METER MEASURING BATTERY CHARGE, “SONY VU”; BETACAM DECK HAS TWO ROUND BLACK BUTTONS LABELLED “RESET” AND “LIGHT” ABOVE BLACK SWITCH LABELLED “TAPE TIMER, TIME CODE”; SIDE HAS DIGITAL DISPLAY SCREEN READING “HOUR, MIN, SEC”. SIDE HAS ROW OF SIX RED LIGHTS NEAR BOTTOM LABELLED WITH WORN WHITE PAINT WITH FIRST TWO ILLEGIBLE, “HUMID, SLACK, TAPE END, BATTERY”. SIDE HAS PANEL THAT OPENS AT BOTTOM EDGE WITH SIX DARK GREY BUTTONS LABELLED IN PAIRS “HOUR, MINUTE, SECOND” AND TWO BLACK SWITCHES LABELLED “U-BIT, TIME” AND “REC RUN, FREE RUN”. SIDE HAS SILVER PLATE FIXED READING “SONY”. BACK OF BETACAM DECK HAS SILVER LABEL WITH RED, GREEN AND BLUE LOGO “45 CFCN TELEVISION”; BACK HAS BLACK LABEL WITH SILVER TEXT “SONY BETACAM, MODEL BVV-1, VIDEOCASSETTE BETACAM DECK, DCIN, 12V, 10W, NO. 11085, SONY CORPORATION, MADE IN JAPAN, 3-676-119-01”. TOP OF BETACAM DECK HAS BLACK LABEL WITH SILVER TEXT “SAVE MODE ONLY”. COLOR CAMERA IN MID-SECTION IS LIGHT GREY WITH SMALL PIECE OF SILVER TAPE FIXED TO TOP. SIDE OF CAMERA HAS YELLOW LABEL WITH BLACK “1”; SIDE HAS DARK GREY CONTROL PANEL AT BOTTON EDGE WITH EMBOSSED TEXT AND SILVER SWITCHES AND BUTTONS, “AUTO WHITE BAL, CAMERA, PRE HEAT/ON, VTR, SAVE/STOP, GAIN, 12/6/0, OUTPUT, BASS/CAM, WHITE BAL, PRE SET/AUTO”. SIDE HAS DARK GREY BUTTON ABOVE CONTROL PANEL LABELLED “VTR START”. SIDE HAS SILVER FITTING BESIDE PANEL LABELLED “PEDESTAL”. SIDE HAS SILVER LABEL WITH WORN BLACK TEXT “SONY MODEL NO. BVP-1, COLOR VIDEO CAMERA, DC, 12V, 11W, NO. 10505”. SIDE HAS SILVER LABEL WITH BLACK TEXT “FILTER, 1 3200’K, 2 5200’K + 1/4ND, 3 5200’K, 4 6800’K”. REVERSE SIDE HAS BLACK PLATE FIXED WITH SILVER TEXT “SONY” ABOVE BLACK LABEL WITH RED, GREEN, BLUE AND WHITE LOGO “TRINICON”. SIDE HAS SILVER FITTING AT LOWER EDGE WITH EMBOSSED LABEL “MONITOR OUT”; LOWER EDGE HAS SILVER KEY HOLE WITH EMBOSSED LABEL “BATTERY”. CAMERA HAS ATTACHED BLACK ABOVE-VIEWFINDER WITH RUBBER GUARD OVER GLASS LENS. VIEWFINDER IS FIXED TO FRONT OF CAMERA; VIEWFINDER HAS WHITE TAPE ATTACHED TO TOP WITH BLUE HANDWRITTEN TEXT “PASS JULZ DAMAGE TO TUBE OR MULT.PLER”. BACK OF VIEWFINDER HAS SILVER SWITCH “TALLY, ON/OF” AND TWO BLACK METAL TURN-KNOBS “BRIGHT, CONTR”. FRONT OF VIEWFINDER HAS BLACK PLATE ATTACHED WITH SILVER TEXT “SONY”. BLACK LENS AT FRONT FIXED IN LENS STAND WITH LEATHER STRAP ON SIDE AND BLACK PLASTIC BUTTONS “VTR, RET, IRIS M”; SIDE OF LENS STAND HAS BLACK SWITCHES “W/T” AND “IRIS, A/M”. LENS HAS WHITE LABEL AROUND MID-SECTION “CANON MACRO TV ZOOMJ13X9C, 9-117MM, 1.1.6, NO.80581, CANON, JAPAN”. LENS ROTATES TO ADJUST FOCUS AND DEPTH. BETACAM HAS WEAR ON LABELS AND DISCOLORATION ON PLASTIC WINDOW; COLOR CAMERA HAS WEAR ON LABELS AND ADHESIVE RESIDUE ON SIDE; HANDLE ON TOP HAS WORN AND CHIPPED PAINT; VIEWFINDER IS WORN; OVERALL VERY GOOD CONDITION.
Subjects
TELECOMMUNICATION T&E
Historical Association
PROFESSIONS
BUSINESS
History
ON MARCH 22, 2018, COLLECTIONS TECHNICIAN KEVIN MACLEAN INTERVIEWED DARREN KRONLUND REGARDING HIS DONATION OF A SONY BVV-1 BETACAM AND CAMCORDER. THE CAMCORDER WAS USED IN THE 1980S BY THE CTV LETHBRIDGE FILM CREW. ON THE FUNCTION OF THE CAMERA IN THE CTV STUDIO, KRONLUND ELABORATED, “THE TECHNOLOGY WITH CAMERAS PROGRESSED QUICKER THAN THE DECKS DID. THESE CAMERAS AND DECKS ARE USED FOR ELECTRONIC FIELD PRODUCTION [AND ARE] CALLED THE EFP CAMERAS. THE DECKS KIND [ARE] THAT TECHNOLOGY WHICH THE MAJORITY OF STATIONS USED FOR THE LONGEST TIME [IN] SONY BETA CAM FORMAT. THAT’S WHAT THE DECK IS, BUT THE CAMERAS THEMSELVES HAD AT ONE TIME THREE TUBES FOR COLOUR CAMERAS. THEN TECHNOLOGY CAME WHERE THEY COULD DO IT WITH JUST SENSORS…SO YOU DIDN’T HAVE TUBES. IT WAS MORE SENSITIVE TO LIGHT AND THAT WAS AN IMPROVEMENT. YOU DIDN’T HAVE TO HAVE TO BRING A BUNCH OF LIGHTS ALONG WITH YOUR SHOOTS. AS THOSE CAMERAS CAME OUT, THEY JUST DID SUCH A BETTER JOB, THAT THESE CAMERAS WERE NO LONGER USED. ALTHOUGH THEY WORKED, THEY WOULD JUST GET STORED AND NEWER TECHNOLOGY, BETTER PICTURES AND LIGHTER [WOULD BE USED].” “[THIS CAMERA] IS A COMPOSITE. AS TECHNOLOGY EVOLVED, THEY COULD SUPPLY [THE] UPPER HALF, THE CAMERA HALF, [AND] YOU COULD CONTINUE TO USE THE OLDER DECK.” TO ME [THE DECK AND CAMERA] ARE DIFFERENT [AGES]. I THINK THE DECK IS NEWER THAN THE CAMERA. OTHERWISE THEY’D BE THE SAME COLOUR. I CAN’T REMEMBER THE OLD, ORIGINAL DECK BUT YOU COULD SWAP OUT DECKS BECAUSE THEY DID MAKE IMPROVEMENTS WITH DECKS AS WELL. THERE WAS A TIME THEY USED METAL TAPES WHICH WAS FOR AUDIO. IT HELPED, YOU COULD GET BETTER AUDIO QUALITY. THEY CALLED THEM METAL, IT’S JUST METAL PARTICLES IN THE TAPE.” “I WOULD SAY THIS CAMERA PROBABLY GOT USED, I’M GOING TO GUESS ’84…IT MIGHT HAVE BEEN IN SERVICE WHEN I GOT HERE…I PROBABLY SERVICED THE] CAMERA AND/OR DECK…[BY 1990 IT WAS] PROBABLY REPLACED WITH THE NEWEST TECHNOLOGY. NOT THE NEWEST TECHNOLOGY BUT NEWEST TO US, CALGARY WOULD HAVE HAD THE NEWEST TECHNOLOGY.” “BETA WAS THE STAPLE FORMAT FOR VIDEO FOR MANY YEARS. PROBABLY LEADING RIGHT UP TO INTO THE DIGITAL WORLD IT WAS THE KING. PANASONIC HAD A FORMAT [TOO]…HITACHI HAD THEIR OWN TOO, BUT THEY EVEN MADE THEIR CAMERAS COMPATIBLE WITH BETA DECKS THAT’S HOW BIG INFLUENCE [WAS]. SOME SMALLER, INDEPENDENT STATIONS MAYBE WENT WITH SOME OF THAT STUFF, BUT I’D SAY 90% OF THE INDUSTRY WAS BETA.” “IT WAS [FOR] REPORTERS. IT WAS FOR NEWS AND VIDEO PRODUCTION.” KRONLUND ELABORATED ON THE CAMERA’S HISTORY IN PRODUCTION, NOTING, “IT’S BEEN IN THE BASEMENT FOR PROBABLY [TEN YEARS]…I FOUND IT IN AN OLD SHIPPING CONTAINER. THERE’S BEEN NUMEROUS UPGRADES TO CAMERAS SINCE THEN, SO NOTHING WAS DONE WITH IT. THE LAST TIME IT WAS USED I’M GOING TO GUESS [WAS] ROUGHLY TEN YEARS AGO, MAYBE MORE.” “I DOUBT YOU WOULD FIND ANYONE USING IT, BUT I WOULDN’T BE SURPRISED IF SOMEBODY HAD IT IN THEIR BASEMENT [FOR] THE SAME REASON OURS WAS. JUST OUT OF SIGHT, OUT OF MIND AND YOU’RE JUST GOING ABOUT YOUR DAY–TO-DAY BUSINESS, UNTIL YOU START CLEANING OUT THINGS AND YOU GO, “OH YEAH, THE OLD BBB1.”” “[WE ACQUIRED EQUIPMENT] USUALLY USED. CALGARY WOULD GET THE NEW STUFF AND THEN THE WORKING STUFF THAT THEY WERE REPLACING WOULD COME DOWN TO US, FOR THE MOST PART. THE CAMERAS WE HAVE NOW WERE BOUGHT BRAND NEW, STATE-OF THE-ART, SO THAT WAS NICE. IT IS NICE FOR THAT, BUT THIS WAS PROBABLY PRE-DATED EVEN ME AND I HAVE BEEN HERE TWENTY-EIGHT YEARS. IT WAS PROBABLY THE CAMERA THEY WERE USING, IF NOT AT THE TIME, BUT LIKELY BEFORE I STARTED.” “THIS [CAMERA] FUNCTIONS TODAY. I’M SURE YOU COULD MAKE PICTURES WITH IT, BUT THE USE OF IT WOULD PROBABLY BE, I’M GOING TO GUESS, MAYBE FIVE OR SIX YEARS. THEN [THE] BUDGETS WOULD [GROW], THEY GOT THIS NEW TECHNOLOGY YOU CAN SHOOT UNDER LESS LIGHT. IT’S A LIGHTER CAMERA AND [THEY] HAVE THESE BENEFITS, SO THEY WOULD BUDGET IN TO UPDATE THE CAMERAS AND DECKS. THROUGH THAT CYCLE, THAT IS WHEN WE WOULD PROBABLY GET A COUPLE OF NEW CAMERAS, THE OLDER STUFF WE’D PUT IN THE BASEMENT.” “I’M [NOW] CLEANING OUT OLD EQUIPMENT, BECAUSE IT BUILDS UP AND WE RUN OUT OF ROOM. IT’S SOMETHING HARD TO GET RID OF BECAUSE THEY’RE ALWAYS WORKING AND USUALLY WORKING AND FUNCTIONING FINE, BUT TECHNOLOGY PROGRESSES AND THEY BECOME BIGGER AND BETTER--OR THERE BECOMES BIGGER AND BETTER WAYS OF DOING THE SAME JOB. IT JUST GETS OUTDATED AND HITS THE SHELF. [I] HATE TO SEE IT JUST GET RECYCLED.” “I’M NOT REALLY THAT TYPE OF [NOSTALGIC] PERSON. THE CAMERAS TODAY ARE ALL DIGITAL, THEY GO RIGHT TO A SD CARD IN DIGITAL FORMAT. THERE’S NO MECHANICAL PARTS AND THAT’S PART OF THE REASON I WAS EMPLOYED BECAUSE SO MUCH OF WHAT I DID WAS BECAUSE PARTS WEAR OUT AND NEED TO BE FIXED AND REPLACED, WHERE THE NEW CAMERAS…IT’S NOT MUCH YOU CAN DO IF IT’S IN DIGITAL FORMAT AND [HAS] NO MECHANICAL MOVING PARTS. I DON’T MISS WORKING ON THEM, THAT COULD BE FRUSTRATING BECAUSE A LOT OF TINY LITTLE GEARS AND TIMING…YOU CAN SPEND HOURS AND NOT GET ANYWHERE, AND THEN FINALLY SHIP IT OUT TO THE MANUFACTURER BECAUSE YOU JUST COULDN’T GET ANYWHERE. YOU SPENT A WEEK WORKING ON IT AND NOW YOU’VE GOT TO, IN THE END, PAY SOMEONE TO DO IT. THOSE ARE FRUSTRATIONS, BUT IT IS SATISFYING WHEN YOU DO FIX A PROBLEM AND ARE ABLE TO FIX IT. BUT THOSE DAYS ARE BEHIND US AND I CAN’T SAY I MISS THEM. IT’S JUST DIFFERENT WAYS OF MAINTAINING CAMERAS NOW.” “IT’S HARD TO THROW OUT BECAUSE THE VALUE OF IT IS LIKE BUYING A CAR…AT THAT TIME. THAT’S WHAT YOU’RE DOING IS PUTTING A CAR ON YOUR SHOULDER, MAYBE NOT QUITE A CAR, BUT I’M GOING TO GUESS THIS CAMERA WAS PROBABLY FIFTEEN THOUSAND DOLLARS BACK THEN. THAT’S A LOT OF MONEY.” FOR MORE INFORMATION INCLUDING THE FULL INTERVIEW TRANSCRIPTION, PLEASE SEE THE PERMANENT FILE P20180005000-GA.
Catalogue Number
P20180005000
Acquisition Date
2018-03
Collection
Museum
Images
Less detail
Other Name
RAGDOLL
Date Range From
1970
Date Range To
1980
Material Type
Artifact
Materials
WOOL, COTTON
Catalogue Number
P20120045001
  2 images  
Material Type
Artifact
Other Name
RAGDOLL
Date Range From
1970
Date Range To
1980
Materials
WOOL, COTTON
No. Pieces
4
Length
42
Width
26
Description
A. RAGDOLL KNIT WITH WHITE, YELLOW, GREEN, RED, AND BLACK YARN. BODY IS WHITE WITH YELLOW UNDERWEAR, GREEN AND WHITE STOCKINGS, AND RED AND BLACK SHOES. DOLL HAS BRIGHT ORANGE HAIR MADE FROM YARN; FACE IS HAND-STITCHED WITH WHITE AND BLACK EYES, RED TRIANGULAR NOSE, AND RED FROWNING MOUTH. DOLL HAS RED YARN TIED AROUND HANDS. WHITE TAG ON BACK READS, IN BLACK, “HAND KNIT BY RESIDENTS OF FORESTER HAVEN”. DOLL SHOWS LITTLE SIGNS OF WEAR; OVERALL EXCELLENT CONDITION. B. NECK-SCARF TIED TO DOLL; (33CM WIDE X 15CM LONG); RED COTTON TRIANGULAR NECK-SCARF WITH SCALLOPED EDGES. SCARF IS HEAVILY CREASED FROM BEING TIED ON THE DOLL; EDGES ARE FRAYED; OVERALL CONDITION IS VERY GOOD. C. GREEN AND WHITE DOTTED OVERALLS, WORN BY RAGDOLL. OVERALLS HAVE WHITE SCALLOPED TRIM AROUND ANKLES AND BIB; OVERALLS ARE SECURED WITH TWO WHITE PLASTIC AND METAL BUTTON-SNAPS. FRONT OF OVERALLS HAS FELT LETTERS “IOF” SEWN ON. OVERALLS SHOW LITTLE SIGNS OF WEAR; OVERALL EXCELLENT CONDITION. D. HAT FOR RAGOLL; STYLE OF A BASEBALL CAP WITH GREEN AND WHITE DOTTED BRIM. CAP IS FORMED BY THREE TRIANGULAR GREEN AND WHITE DOTTED PATCHES AND THREE SOLID WHITE PATCHES WITH WHITE PLASTIC BUTTON SEWN ONTO TOP. CAP HAS GREEN THREAD STITCHED AROUND BASE EDGE AND SECURING BRIM. CAP SHOWS LITTLE SIGN OF WEAR; OVERALL EXCELLENT CONDITION.
Subjects
TOY
Historical Association
ASSOCIATIONS
History
ON AUGUST 21, 2018, COLLECTIONS TECHNICIAN INTERVIEWED LLOYD CAREFOOT REGARDING HIS DONATION OF MEMORABILIA RELATED TO COURT WINDY WEST (#562) LETHBRIDGE CHAPTER OF THE INDEPENDENT ORDER OF FORESTERS. CAREFOOT WAS ACTIVELY INVOLVED WITH THE FORESTERS WHILE HE LIVED IN EDMONTON, ALBERTA, AND CONTINUED HIS INVOLVEMENT FOLLOWING HIS MOVE TO LETHBRIDGE IN 1963. ON THE PURPOSE OF THE RAGDOLL, CAREFOOT NOTED, “THESE DOLLS…WERE PART OF WHAT WE USED FOR…THE PREVENTION OF CHILD ABUSE…THAT WAS ONE OF THE THINGS THAT WE USED IN ADVERTISING…OCCASIONALLY, WHEN THERE WAS SOMETHING GOING ON IN THE CITY, WE’D RENT A SPACE AND HAVE A BOOTH AND THIS WAS ONE OF THE THINGS THAT WE’D PROJECT.” “WE DIDN’T MAKE AND SELL THEM. IT WAS JUST A DEMONSTRATION OF CHILDREN, CAUGHT PEOPLE’S EYE.” “THIS TOOK PLACE [IN] CANADA AND THE UNITED STATES BECAUSE THE INDEPENDENT ORDER OF FORESTERS WAS BIG IN THE UNITED STATES AS WELL AND IT GREW OVER TO ENGLAND…WE WOULD HAVE ACTIVITIES WHERE WE COULD MAKE SOME MONEY AND WE’D DONATE IT TO THE GROUPS THAT WERE [PREVENTING] CHILD ABUSE…WE WOULD HAVE A PRINCESS IN THE VARIOUS COMMUNITIES CLOSE AROUND AND THEY WOULD SELL TICKETS FOR VARIOUS THINGS SO THAT WE WOULD ACCUMULATE THE MONEY…WE WOULD THEN DONATE [THE MONEY] ON BEHALF OF [THE BUYERS] TO [THE] PREVENTION OF CHILD ABUSE.” “TODAY, IT HAS SORT OF FLOATED DOWN TO WHERE IT’S HARDLY NEGLIGIBLE ANYMORE BECAUSE OTHER THINGS HAVE HAPPENED IN THE COMMUNITY THAT WERE PROBABLY DOING BETTER THAN WE WERE.” WHEN ASKED ABOUT HIS TIME SPENT IN THE FORESTERS, CAREFOOT RECALLED, “WE [WIFE RUTH AND LLOYD] WERE INVITED TO [AN] ACTIVITY. [IN THOSE] DAYS THERE [WERE] SOCIAL PARTIES…SOMEBODY THAT I KNEW INVITED ME TO COME AND I HEARD WHAT THEY WERE DOING. IT WAS SOMETHING THAT RUTH AND I THOUGHT…WOULD BE SOMETHING WE’D LIKE TO BE INVOLVED IN…MY FATHER WAS A MEMBER OF THE CANADIAN ORDER OF FORESTERS WHICH WAS A STAGE BEFORE THE INDEPENDENT ORDER OF FORESTERS.” “I BECAME A MEMBER IN EDMONTON… I WAS ONLY AS ASSOCIATE AT THAT TIME. WHEN WE MOVED DOWN HERE, WE BECAME MEMBERS HERE…MY FIRST WORKDAY WAS THE SECOND OF JANUARY, 1963 [IN LETHBRIDGE]. I WAS A FULL-BLOWN MEMBER IN 1966.” “[I JOINED BECAUSE OF] THE SATISFACTION THAT IT’S A STRONG CHARITABLE WAY OF DOING THINGS TO GIVE BACK. THAT’S PART OF MY PHILOSOPHY; JUST GIVE A LITTLE BACK FOR THE GOOD LIFE I’VE HAD.” “I WAS THE PRESIDENT OF THE LEAGUE…OF [THE] LETHBRIDGE CHAPTER. AND [I] WOUND UP WITH [THE TRUNK] AND IN IT [WERE] THESE THINGS. IT PRE-DATES ME.” “MOST OF THOSE THINGS WERE FOR MY PERSONAL USE…EITHER IN EVENTS OR A POSITION I HELD IN THE FORESTERS. I LOOK AT [THE OBJECTS] AND I SMILE.” REGARDING HIS DONATION, CAREFOOT ELABPRATED, “THE FORESTERS IN THE COMMUNITY DID A LOT OF CHARITY WORK AND I THOUGHT IT WAS A WAY OF COVERING FOR THE FUTURE [ABOUT] THE THINGS THAT WE DID, OR STILL DO. THAT WAS, MORE THAN ANYTHING ELSE, MY REASON FOR [DONATING IT] – A WAY OF PASSING IT ALONG SO IT JUST DIDN’T GET SHOVED IN THE JUNK…TO SOMEBODY IN THE FUTURE, IT INDICATES SOMETHING OF WHAT WE DID AND SOME ILLUSTRATION OF THINGS THAT WE DID. FOR MORE INFORMATION INCLUDING THE FULL INTERVIEW TRANSCRIPTION, PLEASE SEE THE PERMANENT FILE P20120045001-GA.
Catalogue Number
P20120045001
Acquisition Date
2012-12
Collection
Museum
Images
Less detail
Other Name
RAGDOLL
Date Range From
1970
Date Range To
1980
Material Type
Artifact
Materials
WOOL, COTTON
Catalogue Number
P20120045002
  2 images  
Material Type
Artifact
Other Name
RAGDOLL
Date Range From
1970
Date Range To
1980
Materials
WOOL, COTTON
No. Pieces
2
Length
40
Width
26
Description
A.RAGDOLL WEARING GREEN AND WHITE DOTTED DRESS; DOLL IS KNIT FROM WOOL AND HAS BRIGHT ORANGE YARN HAIR. DOLL FACE IS HAND-STITCHED WITH WHITE AND BLACK EYES, RED NOSE AND RED FROWNING MOUTH SEWN INTO WOOL. DOLL HAS KNIT YELLOW PANTIES, GREEN AND WHITE STOCKINGS, AND RED AND BLACK SHOES ALL PART OF MAIN BODY. WHITE TAG ON BACK READS, IN BLACK, “HAND KNIT BY RESIDENTS OF FORESTER HAVEN”. DOLL SHOWS LITTLE SIGNS OF WEAR; OVERALL EXCELLENT CONDITION. B. DOLL DRESS; GREEN AND WHITE WITH WHITE SCALLOPED HEM AND SLEEVES, AND WHITE COLLAR. DRESS HAS ELASTIC SLEEVES. DRESS ATTACHED AT BACK OF THE NECK WITH SILVER HOOK-CLASP. OVERALL EXCELLENT CONDITION.
Subjects
TOY
Historical Association
ASSOCIATIONS
History
ON AUGUST 21, 2018, COLLECTIONS TECHNICIAN INTERVIEWED LLOYD CAREFOOT REGARDING HIS DONATION OF MEMORABILIA RELATED TO COURT WINDY WEST (#562) LETHBRIDGE CHAPTER OF THE INDEPENDENT ORDER OF FORESTERS. CAREFOOT WAS ACTIVELY INVOLVED WITH THE FORESTERS WHILE HE LIVED IN EDMONTON, ALBERTA, AND CONTINUED HIS INVOLVEMENT FOLLOWING HIS MOVE TO LETHBRIDGE IN 1963. ON THE PURPOSE OF THE RAGDOLL, CAREFOOT NOTED, “THESE DOLLS…WERE PART OF WHAT WE USED FOR…THE PREVENTION OF CHILD ABUSE…THAT WAS ONE OF THE THINGS THAT WE USED IN ADVERTISING…OCCASIONALLY, WHEN THERE WAS SOMETHING GOING ON IN THE CITY, WE’D RENT A SPACE AND HAVE A BOOTH AND THIS WAS ONE OF THE THINGS THAT WE’D PROJECT.” “WE DIDN’T MAKE AND SELL THEM. IT WAS JUST A DEMONSTRATION OF CHILDREN, CAUGHT PEOPLE’S EYE.” “THIS TOOK PLACE [IN] CANADA AND THE UNITED STATES BECAUSE THE INDEPENDENT ORDER OF FORESTERS WAS BIG IN THE UNITED STATES AS WELL AND IT GREW OVER TO ENGLAND…WE WOULD HAVE ACTIVITIES WHERE WE COULD MAKE SOME MONEY AND WE’D DONATE IT TO THE GROUPS THAT WERE [PREVENTING] CHILD ABUSE…WE WOULD HAVE A PRINCESS IN THE VARIOUS COMMUNITIES CLOSE AROUND AND THEY WOULD SELL TICKETS FOR VARIOUS THINGS SO THAT WE WOULD ACCUMULATE THE MONEY…WE WOULD THEN DONATE [THE MONEY] ON BEHALF OF [THE BUYERS] TO [THE] PREVENTION OF CHILD ABUSE.” “TODAY, IT HAS SORT OF FLOATED DOWN TO WHERE IT’S HARDLY NEGLIGIBLE ANYMORE BECAUSE OTHER THINGS HAVE HAPPENED IN THE COMMUNITY THAT WERE PROBABLY DOING BETTER THAN WE WERE.” WHEN ASKED ABOUT HIS TIME SPENT IN THE FORESTERS, CAREFOOT RECALLED, “WE [WIFE RUTH AND LLOYD] WERE INVITED TO [AN] ACTIVITY. [IN THOSE] DAYS THERE [WERE] SOCIAL PARTIES…SOMEBODY THAT I KNEW INVITED ME TO COME AND I HEARD WHAT THEY WERE DOING. IT WAS SOMETHING THAT RUTH AND I THOUGHT…WOULD BE SOMETHING WE’D LIKE TO BE INVOLVED IN…MY FATHER WAS A MEMBER OF THE CANADIAN ORDER OF FORESTERS WHICH WAS A STAGE BEFORE THE INDEPENDENT ORDER OF FORESTERS.” “I BECAME A MEMBER IN EDMONTON… I WAS ONLY AS ASSOCIATE AT THAT TIME. WHEN WE MOVED DOWN HERE, WE BECAME MEMBERS HERE…MY FIRST WORKDAY WAS THE SECOND OF JANUARY, 1963 [IN LETHBRIDGE]. I WAS A FULL-BLOWN MEMBER IN 1966.” “[I JOINED BECAUSE OF] THE SATISFACTION THAT IT’S A STRONG CHARITABLE WAY OF DOING THINGS TO GIVE BACK. THAT’S PART OF MY PHILOSOPHY; JUST GIVE A LITTLE BACK FOR THE GOOD LIFE I’VE HAD.” “I WAS THE PRESIDENT OF THE LEAGUE…OF [THE] LETHBRIDGE CHAPTER. AND [I] WOUND UP WITH [THE TRUNK] AND IN IT [WERE] THESE THINGS. IT PRE-DATES ME.” “MOST OF THOSE THINGS WERE FOR MY PERSONAL USE…EITHER IN EVENTS OR A POSITION I HELD IN THE FORESTERS. I LOOK AT [THE OBJECTS] AND I SMILE.” REGARDING HIS DONATION, CAREFOOT ELABPRATED, “THE FORESTERS IN THE COMMUNITY DID A LOT OF CHARITY WORK AND I THOUGHT IT WAS A WAY OF COVERING FOR THE FUTURE [ABOUT] THE THINGS THAT WE DID, OR STILL DO. THAT WAS, MORE THAN ANYTHING ELSE, MY REASON FOR [DONATING IT] – A WAY OF PASSING IT ALONG SO IT JUST DIDN’T GET SHOVED IN THE JUNK…TO SOMEBODY IN THE FUTURE, IT INDICATES SOMETHING OF WHAT WE DID AND SOME ILLUSTRATION OF THINGS THAT WE DID. FOR MORE INFORMATION INCLUDING THE FULL INTERVIEW TRANSCRIPTION, PLEASE SEE THE PERMANENT FILE P20120045001-GA.
Catalogue Number
P20120045002
Acquisition Date
2012-12
Collection
Museum
Images
Less detail
Date Range From
1933
Date Range To
2000
Material Type
Artifact
Materials
CLOTH, FELT, PAINT
Catalogue Number
P20160003002
  1 image  
Material Type
Artifact
Date Range From
1933
Date Range To
2000
Materials
CLOTH, FELT, PAINT
No. Pieces
2
Height
29.5
Width
15
Description
A: HANDMADE DOLL. THE “ESKIMO” DOLL IS MADE WITH LIGHT BLUE, FELT-LIKE FABRIC WITH WHITE FABRIC ACCENTS. THE FACE IS MADE OUT OF A LIGHTER FABRIC THAT IS PEACH-COLOURED. THE FACIAL DETAILS ARE HAND PAINTED. THE DOLL HAS BLUE EYES, EYEBROWS, NOSTRILS, RED LIPS, AND ROSY CHEEKS. THE LIGHT BLUE FABRIC THAT MAKES UP THE MAJORITY OF THE DOLL’S BODY IS ENCOMPASSING THE DOLL’S FACE LIKE A HOOD. THE DOLL’S TORSO IS COVERED IN THE LIGHT BLUE FELT. TWO HEART-SHAPED ARMS, MADE OF THE SAME MATERIAL, ARE ATTACHED TO EITHER SIDE OF THE BODY. THE DOLLS UPPER LEG AND FEET ARE COVERED IN THE LIGHT BLUE FELT. FROM THE KNEES TO THE ANKLES, A LIGHTER, WHITE FABRIC IS COVERING THE LEGS. B: DOLL SKIRT. AROUND THE DOLL’S WAIST IS A DETACHABLE SKIRT MADE OF THE SAME FABRIC AND A WHITE WAISTBAND. POOR CONDITION. ALL FABRIC IS WELL-WORN AND THREADBARE IN MULTIPLE PLACES. THE DOLL’S RED STUFFING IS VISIBLE THROUGH PARTS OF THE FABRIC. THERE IS DISCOLORATION (YELLOWING) OVERALL. THE STUFFING IS NOT EVENLY DISTRIBUTED THROUGHOUT THE DOLL. THE SEAMS AT THE ARMS ARE FRAGILE. THE PAINT FOR THE DOLL’S FACE IS SEVERELY FADED.
Subjects
TOY
Historical Association
ETHNOGRAPHIC
LEISURE
History
THE KONKINS WERE A RUSSIAN-SPEAKING FAMILY FROM THE TOWN OF SHOULDICE, ALBERTA, NEAR CALGARY. THEY AND MANY OTHER RUSSIAN FAMILIES COMPOSED THAT TOWN’S DOUKHOBOR COLONY. IT WAS THERE WILLIAM KONKIN MARRIED ELIZABETH WISHLOW. IN 1928 THEIR DAUGHTER, ELSIE WAS BORN. THE FAMILY LATER MOVED TO A FARM IN VAUXHALL, ALBERTA. THE PRECEDING AND FOLLOWING INFORMATION HAS BEEN EXTRACTED FROM A TWO-PART INTERVIEW WITH DONOR ELSIE MORRIS, WHICH WAS CONDUCTED BY COLLECTIONS TECHNICIAN KEVIN MACLEAN ON FEBRUARY 17, 2016. ADDITIONAL INFORMATION COMES FROM FAMILY HISTORIES AND TEXTS PROVIDED BY THE DONOR. A FULL HISTORY OF THE KONKIN FAMILY CAN BE FOUND WITH THE RECORD P20160003001. THIS DOLL BELONGED TO MORRIS AS A CHILD. SHE EXPLAINS, “THIS CAME FROM A GREAT AUNT WHO CAME TO VISIT US AND SHE ALWAYS BROUGHT GIFTS AND THIS ONE WAS MINE AND I LOVED THIS DOLL… I REMEMBER PLAYING WITH IT, IT WAS SOFT AND CUDDLY WHEN I HAD IT… MY DAUGHTER WENT THROUGH IT AND MY GRANDDAUGHTER AND THEN I PUT A STOP TO IT BEFORE THEY ATE IT UP OR DID SOMETHING… THEY LOVED IT AND THEY, YOU KNOW LITTLE KIDS, THEY’RE CARELESS SO I’LL KEEP IT...” IN A PHONE CALL WITH COLLECTIONS ASSISTANT ELISE PUNDYK ON OCTOBER 24, 2017, MORRIS SAID SHE RECIEVED THE DOLL FROM HER GREAT AUNT WHO HAD BROUGHT IT FROM VISITING BRITISH COLUMBIA. MORRIS PLAYED WITH THE DOLL AS A CHILD, AS DID MORRIS' CHILDREN. THE DOLL WAS LOVED BY MULTIPLE GENERATIONS IN MORRIS' FAMILY AS HER GRANDCHILDREN AND GREAT GRANDCHILDREN WOULD ALSO PLAY WITH THE DOLL WHEN THEY CAME TO VISIT. PLEASE SEE THE PERMANENT FILE FOR MORE INFORMATION INCLUDING FULL INTERVIEW TRANSCRIPTION, OBITUARIES, PHOTOGRAPHS, AND FAMILY HISTORIES.
Catalogue Number
P20160003002
Acquisition Date
2016-02
Collection
Museum
Images
Less detail
Other Name
CTV AUDIO BOARD/CONSOLE
Date Range From
1972
Date Range To
2014
Material Type
Artifact
Materials
METAL, WOOD, PLASTIC
Catalogue Number
P20160013000
  2 images  
Material Type
Artifact
Other Name
CTV AUDIO BOARD/CONSOLE
Date Range From
1972
Date Range To
2014
Materials
METAL, WOOD, PLASTIC
No. Pieces
2 1
Height
40.5
Length
71.5
Width
44.5
Description
A: AUDIO BOARD. RECTANGULAR SHAPED BASE. MEDIUM BLUE METAL BOTTOM WITH MEDIUM BROWN WOOD AND PLASTIC UPPER PORTION. UPPER PORTION SITS ON A DIAGONAL INCLINE, WITH A SILVER COLOURED METAL STRIP ALONG THE BOTTOM. ABOVE THIS ARE FOUR RECTANGULAR HOLES: TWO LEFT MOST RECTANGLES ARE EMPTY AND REVEAL THE BOARD MODULES BENEATH. THE NEXT TWO RECTANGLES EACH HAVE WHITE BUTTONS IN THEM: FOUR WHITE BUTTONS LABELED BLANK, “START”, “STOP”, “RESET” IN ONE, WITH TWO IN THE NEXT: :”FULL TRK.” AND “HALF TRK.” JUST ABOVE THIS IS A LINE OF EIGHT LARGE CIRCULAR BLACK AND SILVER KNOBS NEAR BOTTOM OF THE CONSOLE. TO THE RIGHT OF THE KNOBS ARE THREE SMALL CIRCULAR SILVER COLOURED KNOBS, LABELED FROM TOP: “HDST”, “FX SEND”, “MONITOR”, AND THEN 10 SMALL SQUARE BUTTONS, LABELED FROM TOP: “CUE”, “CH8”, “CH7”, “CH6”, “CH5”, “CH4”, “CH3”, “CH2”, “CH1”, “PGM”. IMMEDIATELY TO THE RIGHT OF THIS LINE OF BUTTONS IS A LONG RECTANGLE WITH TEXT: “FX SEND SELECT”. ABOVE THE EIGHT LARGE KNOBS IS A STRIP OF SILVER METAL WITH A SERIES OF OFF-WHITE BUTTONS ABOVE. THE STRIP IS LABELED, FROM LEFT TO RIGHT: “CDP”, “RSWR-24”, “CASS”, “MIC 1”, “MIC 2”, “DIGICART”, “FX RTN”, “COMPUTER CH1”, “COMPUTER CH2”, “EDIT B”. JUST ABOVE “EDIT B” IS A COUNTER, WHICH IS PRESENTLY STOPPED AT “666”. AT THE VERY TOP OF THE BOARD, IS A RECTANGULAR SECTION, WHICH IS 63.5CM LONG AND 9.7CM TALL. IN THIS SECTION, THERE ARE TWO SQUARE SPEAKERS ON EITHER END. BELOW THE LEFT SPEAKER IS AN EMBOSSED MAKERS LABEL: “MCCURDY RADIO INDUSTRIES LIMITED.” A VU METER IS IN THE CENTRE. IT’S BACKGROUND HAS YELLOWED, HAS A SCALE IN BLACK AND RED INK. REVERSE IS MOSTLY MEDIUM BLUE METAL, WITH A HINGED UPPER PORTION THAT IS TOPPED IN WOOD. ALONG THE BACK THERE ARE TEN VENTILATION SECTIONS: EACH HAS THREE HORIZONTAL LINES. TOP LEFT CORNER IS A BLACK AND SILVER LABEL: “MCCURDY RADIO INDUSTRIES LIMITED. TORONTO, ONTARIO CANADA. MODEL NO. SS4388A. SERIAL # C505084. 117 V. ___ VA. 60 CPS.” A SHORT, LIGHT GREY CORD WITH A BLUE TIP, COMES OUT OF THE RIGHT SIDE OF THE BACK. TOP RIGHT CORNER IS A SILVER COLOURED METAL CIRCLE, WITH A LIGHT GREEN CENTRE. THE LIGHT GREEN CENTRE HAS THREE HOLES. ABOVE THE HOLES IS A SMALL BUTTON “PUSH”. EMBOSSED IN THE METAL BELOW THE THREE HOLES: “SWITCHCRAFT”. A BLACK POWER CORD COMES OUT OF THE BOTTOM OF THE UNIT. OVERALL GOOD TO VERY GOOD CONDITION. UNIT IS SLIGHTLY DISCOULOURED/STAINED. A FEW SMALL SCRATCHES IN THE SURFACE, ESPECIALLY ON THE TOP WOODEN PORTION. B: A COMB BOUND MANUAL WITH BLUE PLASTIC COVERS. A CUT OUT IN THE FRONT COVER SHOWS THE FRONT PAGE, DISPLAYING THE TITLE “INSTRUCTIONS SS4 388A CFCN COMMUNICATIONS CALGARY ALBERTA 760083C.” THE BLUE FRONT COVER ITSELF READS “MCCURDY RADIO INDUSTRIES LIMITED”, AND “MCCURDY RADIO INDUSTRIES INCORPORATED”, EACH FOLLOWED BY AN ADDRESS. THE BOOK IS DIVIDED BY PALE BLUE DIVIDERS INTO SIX SECTIONS. EACH SECTION IS AN INSTRUCTION MANUAL COMPLETE WITH DIAGRAMS, FOR A COMPONENT OF THE SS4388A, WITH THE FIRST SECTION BEING A MANUAL FOR THE SS4388A AS A WHOLE. AT THE BACK OF THE BOOKLET SIT A NUMBER OF LOOSE PAGES, SOME WITH HOLES FOR THE COMB BINDING, SOME FOLD OUT DIAGRAMS. DIMENSIONS OF MANUAL ARE: LENGTH 25.9 CM; HEIGHT 31.1 CM; WIDTH 25.9. CONDITION: THE PAGES AND DIVIDERS STICKING OUT OF THE BOOK IS BENT AND CURLED, WORN SOFT. THE FRONT COVER IN SPLITTING AT THE BOTTOM CORNERS.
Subjects
TELECOMMUNICATION T&E
Historical Association
BUSINESS
History
THE FOLLOWING INFORMATION COMES FROM AN INTERVIEW WITH DARREN KRONLUND CONDUCTED BY KEVIN MACLEAN IN MAY 2016. PERFORMING THE ROLE OF BROADCAST TECHNICAL ENGINEER & IT SUPPORT AT CTV LETHBRIDGE, DARREN STARTED WORK THERE IN 1989. AT THAT TIME, THERE WERE FOUR BROADCAST ENGINEERS IN LETHBRIDGE; AS OF 2016, DARREN IS THE ONLY ONE REMAINING. CTV OFFERED THE CONSOLE TO THE MUSEUM BECAUSE, ACCORDING TO DARREN, “ALTHOUGH IT STILL WORKS AND FUNCTIONS, IT HAS BECOME NOT RELEVANT ANYMORE BECAUSE WE’RE IN A DIGITAL WORLD NOW...IT HASN’T BEEN USED BY US...IN PROBABLY 18 MONTHS...IT TOOK US RIGHT THROUGH, AND INCLUDING THE TRANSITION INTO DIGITAL. IT WAS PART OF THAT [TIME], WHERE WE WOULD VOICE THROUGH THE BOARD, WHICH IS IN THE ANALOG WORLD, AND WE PUT SOME EQUIPMENT IN LINE THAT WOULD CONVERT ANALOG TO DIGITAL, AND GET IT INTO OUR COMPUTERS, AND WE COULD E-MAIL IT, SO IT WAS USED EVEN THEN.” THE CONVERSION TO DIGITAL FROM ANALOG STARTED IN THE SPRING OF 2014 AND THE PRIMARY DELAY IN CONVERTING ENTIRELY TO DIGITAL WAS THE COST: “THAT’S A LOT OF MONEY TO GET ALL OF THE EQUIPMENT, ALL AT ONCE, AND MAKE THE SWITCH OVER, AND THEN STILL PUT OUT NEWSCASTS, AND SO THAT WAS JUST FINDING THE RIGHT TIME TO JUMP, AND IT TURNED OUT THAT IT WAS A BUDGET YEAR THAT SOME CAPITAL BECAME AVAILABLE, AND LET’S MAKE THE JUMP. SO, WE WENT OUT AND BOUGHT THE EQUIPMENT, SO THAT WE COULD GATHER IT IN DIGITAL, EDIT IT IN DIGITAL, AND THEN HAVE THE MEANS TO FILE IN DIGITAL. AND THAT WAS ACTUALLY ALL DONE LIKE WITHIN 3 MONTHS. THAT WAS A QUICK LITTLE PROJECT. AND, THIS WAS STILL WORKING. IT JUST FILLED A NEED ALL THROUGH THAT." DARREN RELATED THAT, AT THE TIME OF THE INTERVIEW, CTV LETHBRIDGE WAS “PROBABLY 80% DIGITAL.” FURTHER CONVERSION IS HELD UP DUE TO COST: “IF WE HAD THE MONEY TO DO IT, WE WOULD. WE STILL HAVE SOME VIDEO EQUIPMENT THAT WE ARE USING ANALOG HERE, WHERE IT’S TAKING ABOUT FOUR PIECES OF EQUIPMENT TO ACHIEVE STUFF, BECAUSE WE HAVE TO BRING THE DIGITAL WORLD BACK TO ANALOG. IT’S KIND OF REVERSE, BUT COST-WISE, IT DOESN’T MAKE SENSE TO REPLACE IT WHEN WE HAVE SOMETHING WORKING ALTHOUGH IT’S GOING TO TAKE SOMETHING FAILING IN THAT CHAIN TO MAYBE PROMPT THE … MOVE OVER TO DIGITAL THERE. SO, WE STILL HAVE SOME EQUIPMENT THAT IS IN THE OLD ANALOG WORLD, BUT RIGHT NOW IT HAS GONE SO FAR AS WE ARE CONVERTING DIGITAL TO ANALOG AND IT COMES DOWN TO US MONITORING IT. OUR MONITORING EQUIPMENT IS IN THE ANALOG WORLD.” DARREN EXPLAINED WHY THIS BOARD CONTINUED TO BE USED, DURING THE TRANSITION TO DIGITAL: “EVERYTHING COMES DOWN TO MONEY, AND TO REPLACE IT WITH THE DIGITAL WORLD, AT THE COST, AND WE COULD ACHIEVE IT JUST BY BUYING SOME IN-LINE EQUIPMENT, AND GET THE SAME RESULTS, SO, IT STILL FUNCTIONS AND WORKED, AND DID WHAT WE REQUIRED WHICH WAS TO MIX SIGNALS, OR EVEN JUST TO TAKE A SIGNAL AND GET IT WHERE WE WANTED, WHICH WAS THROUGH THIS OTHER EQUIPMENT, TO DO THE CONVERSION, AND IT JUST WORKED, AND IT DIDN’T MAKE SENSE TO PUT A BUNCH OF MONEY INTO SOMETHING TO REPLACE THE WHOLE CONSOLE WHEN WE DIDN’T NEED TO.” THE BOARD CAME FROM A ROOM CALLED THE AUDIO BOOTH, WHICH IS “USED FOR VOICING. IT’S GOT A SM4 MICROPHONE WHICH IS A VERY EXPENSIVE MIC, AND IT’S COMMON THROUGHOUT THE BROADCAST INDUSTRY, AND THE ROOM ITSELF IS ACOUSTICALLY-TREATED SO THAT, YOU KNOW, YOU DON’T WANT NOISE FROM OUTSIDE COMING IN. SO, EVEN THE TELEPHONE HAS A FLASHING LIGHT IF IT’S RINGING. IF YOU NEED TO GET HOLD OF SOMEBODY IN THE AUDIO BOOTH, IT FLASHES. IT’S JUST A ROOM SPECIALLY DESIGNED FOR VOICING.” DARREN EXPLAINED HOW THE CONSOLE ENDED UP AT CTV LETHBRIDGE: “THE MANUAL TELLS ME THAT IT WAS BRAND-NEW IN 1972, AND, I’VE TALKED TO A FEW PEOPLE. THE PEOPLE THAT ORIGINALLY PROBABLY BOUGHT THIS, IT WAS USED UP IN CALGARY FOR A NUMBER OF YEARS, AND I DON’T HAVE THE HISTORY FROM CALGARY. BUT, I’M GOING TO GUESS THAT, SOMEWHERE, PROBABLY, IF IT WAS NEW IN 1972, AND I CAME ONBOARD HERE IN ’89, SO, SOMEWHERE IN THE ‘80’S, PROBABLY MID ‘80’S, I’M GUESSING THAT WE RECEIVED IT, AND PUT IT INTO USE – I’M PRETTY SURE DIRECTLY INTO AN AUDIO BOOTH. THE AUDIO BOOTH MIGHT NOT HAVE BEEN THERE AT THE TIME, BECAUSE, I KNOW, WHEN I CAME, THERE WAS ANOTHER BOARD, VERY SIMILAR TO THIS, THAT WAS IN A CONTROL ROOM, AND IT WAS USED AS PART OF PRODUCTION.” DARREN DOESN’T FIND HIMSELF FEELING VERY NOSTALGIC ABOUT OLD EQUIPMENT: “THE MORE PROBLEMS THEY CREATE, THE LESS ATTACHED I AM TO THEM, (LAUGHS) BECAUSE PART OF MY JOB IS TO KEEP THEM RUNNING. TO TELL YOU THE TRUTH, ACTUALLY I WOULD BE QUITE FOND OF THIS, BECAUSE I RARELY, IN ALL MY YEARS, I CAN’T EVEN REMEMBER, MAYBE 2 OR 3 TIMES, I’VE HAD TO DEAL WITH PROBLEMS WITH IT. SO IT HAS PROBABLY BEEN, IF NOT THE MOST RELIABLE, RIGHT UP THERE. AND, ONE OF THE THINGS I WAS GOING TO MENTION, WITH THESE, THE COMPONENTS ARE ALL DISCRETE. EACH BOARD HAS DISCRETE COMPONENTS, MEANING INDIVIDUAL TRANSISTORS. WHEREAS NOWADAYS BOARDS, THEY HAVE CHIPS AND IC’S, YOU DON’T SEE THAT ON THESE. YOU SEE – YOU’D WORK ON THESE; AND YOU’D LOOK AT A SCHEMATIC, AND YOU WOULD ISOLATE IT RIGHT DOWN TO A RESISTOR, OR A CAPACITOR AND TODAY, YOU CAN’T WORK ON EQUIPMENT. IT’S MORE DISPOSABLE TODAY.” DARREN SEES THE TRANSITION AS BOTH “GOOD AND BAD. THIS LEVEL OF TROUBLESHOOTING IS REWARDING WHEN YOU ‘GET IT’, BUT IT CAN BE PRETTY FRUSTRATING WHEN YOU ARE JUST KIND OF CHASING YOUR TAIL, WHERE WITH THE NEW STUFF, IT’S MORE BOARD REPLACEMENT, AND IT’S A LOT QUICKER PROCESS. BUT ALSO, THE REASON I SAY IT’S MORE DISPOSABLE, BECAUSE, YOU DON’T SPEND THE TIME ON IT LIKE YOU WOULD HERE, BECAUSE THE TIME THAT IT TAKES AT THIS BOARD, THEY JUST DON’T SUPPLY YOU BOARDS ANYMORE. THEY WOULD SEND LOANERS AND SUPPORT FOR STUFF WAS A LOT BETTER BACK THEN. NOW, IT’S BECOME A DISPOSABLE WORLD. IF YOU DON’T HAVE A CARD, YOU BUY A NEW CARD, AND THAT KIND OF THING. COMPONENTS JUST HAD MORE LONGEVITY. THIS ERA – I STILL HAVE SOME DISTRIBUTION AMPS THAT ARE STILL IN SERVICE AND THEY OUTLIVE STUFF THAT WAS BOUGHT 10 YEARS AFTER THEM. THERE’S A LOT MORE RESILIENCY TO STUFF THAT WAS BUILT THEN.” SEE PERMANENT FILE FOR COPY OF INTERVIEW TRANSCRIPT.
Catalogue Number
P20160013000
Acquisition Date
2016-05
Collection
Museum
Images
Less detail
Other Name
SELF-CONTAINED BREATHING APPARATUS / AIR MASK AND HARNESS
Date Range From
1975
Date Range To
2000
Material Type
Artifact
Materials
PLASTIC, METAL, COTTON
Catalogue Number
P20150010017
  2 images  
Material Type
Artifact
Other Name
SELF-CONTAINED BREATHING APPARATUS / AIR MASK AND HARNESS
Date Range From
1975
Date Range To
2000
Materials
PLASTIC, METAL, COTTON
No. Pieces
5
Height
29.2
Length
68.8
Width
50.7
Description
SELF-CONTAINED BREATHING APPARATUS, INCLUDES CASE, HARNESS ASSEMBLY, MASK WITH STRAP, AND PAPER PASS CERTIFICATE. .A: CASE. BLACK MOULDED, TEXTURED PLASTIC CASE. ROUGHLY RECTANGULAR SHAPED. HINGED AT THE BACK, CASE HAS THREE HANDLES ON THE FRONT: ONE IS IN THE CENTRE OF THE CASE, WITH THE OTHER TWO ARE ON THE CORNERS OF THE BOX. THERE ARE TWO PLASTIC LATCHES BETWEEN THE THREE HANDLES. BLACK AND SILVER COLOURED STICKER ON THE TOP OF THE BOX READS: "MSA AIRMASK". A SECOND BLACK AND SILVER STICKER, ABOVE ONE OF THE LATCHES, READS: "ULTRALITE PRESSURE DEMAND" AND ALSO HAS "PASS IN BOX" HANDWRITTEN IN BLACKMARKER. A THIRD BLACK AND SILVER STICKER THAT READS "MSA AIRMASK" IS ON THE BOTTOM OF THE BOX. YELLOW PIECE OF DUCT TAPE ON RIGHT SIDE, HANDWRITTEN IN BLACK INK: "ULTRALITE BMR". INSIDE THE BOX IS SUBDIVIDED INTO COMPARTMENTS. AFFIXED TO THE INSIDE TOP OF THE LID IS A PAGE OF INSTRUCTIONS TITLED "MSA AIR MASK, PRESSURE DEMAND TYPE". A SMALL PIECE OF PAPER AFIXED TO THE INSIDE OF THE LID IS TITLED "PACKING ARRANGEMENT" AND HAS AN ILLUSTRATION OF HOW THE UNIT SHOULD BE PACKED AWAY. DIMENSIONS PROVIDED ABOVE CORRESPOND TO THIS CASE. OVERALL IN FAIR TO GOOD CONDITION. THE TWO "MSA AIRMASK" STICKERS HAVE PARTIALLY PEELED AWAY, WITH THE TOP STICKER MISSING THE BOTTOM OF "ASK" IN "MASK" AND WITH THE BOTTOM STICKER MISSING PARTS OF THE "MSA": THE "M" AND "A" ARE PARTIALLY MISSING, WHILE THE "S" IS ENTIRELY GONE; "MASK" OF THIS STICKER IS ALSO VERY DAMAGED. LATCH BELOW THE "ULTRALITE" STICKER IS IN GOOD CONDITION, WHILE THE OTHER IS PARTIALLY BROKEN. SEVERAL SCUFFS AND SCRATCHES IN THE PLASTIC, ESPECIALLY ALONG THE BOTTOM. .B: HARNESS ASSEMBLY. BLACK PLASTIC, METAL, AND FABRIC WITH SILVER COLOURED METAL. OUTER PORTION OF HARNESS DESIGNED TO HOLD BOTTLE OF COMPRESSED AIR. BLACK METAL BRACKET RUNS VERTICALLY UP AND DOWN THE HARNESS AND HAS A SILVER COLOURED CIRCULAR METAL BAND TO HOLD TANK IN PLACE. THE SILVER BAND IS 7.7CM WIDE AND HAS TWO BLACK STICKERS WITH “MSA” IN YELLOW STUCK ON. BOTTOM OF BLACK METAL BRACKET HAS A TRIANGULAR SHAPED PIECE, WITH A ROUND RUBBER TIP, TO HOLD THE BOTTOM OF THE AIR TANK IN PLACE. BELOW SILVER BAND IS A STICKER, WITH A DISCOLOURED WHITE BACKGROUND AND BLACK LETTERS GIVING INSTRUCTIONS FOR USE, ENTITLED: “CUSTOM 4500/ULTRALITE BELT MOUNTED SCBA. OPEN CIRCUIT, PRESSURE-DEMAND ENTRY AND ESCAPE SELF-CONTAINED BREATHING APPARATUS OR COMBINATION SELF-CONTAINED BREATHING APPARATUS AND TYPE C SUPPLIED AIR RESPIRATOR.” SILVER BAND FOR TANK HAS A HANDLE THAT EXPANDS AND CONTRACTS THE BAND, TO ALLOW FOR REMOVAL AND INSTALLATION OF AIR TANK. AT THE TOP OF THE BLACK METAL BRACKET, THERE IS A CIRCULAR SECTION WHICH ALLOWS FOR THE ATTACHMENT OF TWO BLACK PADDED FABRIC SHOULDER STRAPS. THESE STRAPS ARE BOLTED ON WITH BLACK AND SILVER COLOURED BOLTS. BLACK METAL BRACKET ATTACHES AT WAIST AREA TO BLACK MOULDED PIECE OF PLASTIC. BLACK MOULDED PLASTIC FITS AROUND THE HIP AREA OF THE WEARER. SHOULDER STRAPS COME DOWN FROM TOP OF METAL BRACKET AND ATTACH TO THIS BLACK PLASTIC JUST ABOVE THE HIP. SHOULDER STRAPS ARE PADDED AND HAVE A SECOND SMALLER STRAP, WHICH WOULD CROSS THE WEARER’S CHEST WITH A BLACK SIDE RELEASE PLASTIC BUCKLE, WITH THE FEMALE COMPONENT ON THE RIGHT STRAP. ON EACH STRAP BELOW THE PLASTIC BUCKLE IS A SILVER COLOURED “D” RING. ABOVE THE BUCKLE ON EACH STRAP IS A SILVER COLOURED SILK SCREEN SECTION WITH “MSA”. AT THE BOTTOM WAIST PORTION OF THE MOULDED PLASTIC IS ANOTHER BLACK FABRIC STRAP, TO GO AROUND THE WEARER’S WAIST. THE BELT ATTACHES WITH A SILVER COLOURED METAL LATCH PLATE ON THE RIGHT SIDE, WHICH FITS INTO A BLACK PLASTIC BUCKLE, WITH A BLACK PLASTIC BUTTON TO RELASE, ON THE WEARER’S LEFT SIDE. ATTACHED TO THE LEFT SIDE OF THE BELT IS A PRESSURE REGULATOR AND HIGH PRESSURE SUPPLY HOSE. THE PRESSURE REGULATOR CONSISTS OF BLACK METAL AND PLASTIC, AND GOLD AND RED COLOURED METAL. A CIRCULAR GOLD COLOURED METAL PIECE HAS REMNANTS OF TWO STICKERS ON ITS FACE: “MSA AIR MASK – MFD BY MINE SAFETY APPLIANCES COMPANY – PITTSBURGH, PENNSYLVANIA – PRESSURE DEMAND.” BELOW IT IS A HOSE COUPLING. THIS COUPLING HAS A BLACK RUBBER CAP, EMBOSSED WITH “FHR”. BESIDE THIS IS AN AIR PRESSURE GAUGE: BLACK METAL TEXTURED EDGE, GLASS FACE, AND RUBBER ENCASING. THE FACE OF THE GAUGE IS OFF-WHITE WITH A DIAL INCREASING IN INCREMENTS OF 5 (5, 10, 15, 20, 25, 30), WITH A RED SECTION FROM 0-5, A YELLOW SECTION BETWEEN 20 AND 25, AND A GREY SECTION AT 30. BELOW THE DIAL IS “PSI X 100 – USE NO OIL – MSA 18” BESIDE THE GAUGE IS A RED COLOURED METAL KNOB, WITH “ß OPEN – BY PASS” EMBOSSED ON FRONT FACE. BESIDE THIS RED KNOB IS A GOLD COLOURED KNOB WITH A SILVER COLOURED TAB “^PUSH^”. ON THE FACE OF THE GOLD KNOB, EMBOSSED, IS “MAIN LINE ^” WITH “MSA” IN CENTRE. OPPOSITIE THE PRESSURE GAUGE IS A HIGH PRESSURE SUPPLY HOSE. THE HOSE IS BLACK PLASTIC AND FABRIC. ON THE END OF THIS HOSE IS A SILVER COLOURED BELL, USED AS A LOW AIR ALARM. AT THE VERY END OF THE HOSE IS A BLACK TEXTURED METAL COUPLING. .C: MASK WITH HOSE. BLACK PLASTIC RESPIRATOR MASK WITH CLEAR PLASTIC VISOR. FITTED NOSE PIECE WITH TWO SMALL CIRCLES ON EITHER SIDE OF BRIDGE OF NOSE PIECE. EACH CIRCLE HAS BLACK PLASTIC SPOKES AND A TRANSPARENT FLAP, WHICH IS ON THE INSIDE OF THE NOSE PIECE. HANDWRITTEN IN GOLD COLOURED INK, ON THE INSIDE OF NOSE PIECE, “G29C” OR “929C”. FRONT OF NOSE PIECE, VISIBLE THROUGH THE VISOR, HAS “MEDIUM” EMBOSSED ONTO MASK. FIVE BLACK PLASTIC STRAPS WITH SILVER COLOURED BUCKLES ALLOW MASK TO BE SECURELY TIGHTENED ONTO THE HEAD. STRAPS MEET AT A ROUGHLY STAR-SHAPED PIECE THAT SITS AT THE BACK OF THE HEAD. THIS STAR-SHAPED PIECE HAS THE FOLLOWING EMBOSSED ONTO THE PLASTIC: “M2 C5 – MSA – PULL FRONT STRAP LAST – U”. ABOVE THE “M2 C5” IS AN EMBOSSED MULTI-SPOKED CIRCLE. EMBOSSED IN THE CENTRE OF THE CIRCLE: “93 – 94 – 95” EACH OF THE FIVE STRAPS ARE LABELLED; TWO AT THE BASE OF MASK, EACH LABELLED “NECK”, NEXT TWO UP ARE “SIDE”, AND THE FIFTH STRAP AT THE TOP OF THE MASK IS “FRONT”. ON FRONT OF MASK, AT THE MOUTH AREA, IS A LONG ACCORDION-STYLE HOSE. IT IS ATTACHED TO THE MASK WITH A SILVER COLOURED METAL CLAMP. ON THE NUT OF THIS CLAMP IS WRITTEN “ALL STAINLESS BREEZE”. BELOW IS A BLACK METAL BAND, WHICH IS STAMPED IN YELLOW WITH “-18 TINNERMAN”. BELOW THAT THERE IS A SILVER COLOURED METAL RING, WHICH HAS A BLACK FABRIC STRAP ATTACHED (SEE BELOW FOR DESCRIPTION OF THIS ITEM, P20150010017D). THE BOTTOM OF THE HOSE HAS A BLACK METAL BAND AND THEN A SILVER COLOURED, TEXTURED METAL PIECE TO CONNECT TO THE AIR SUPPLY CANISTER. BELOW THE HOSE CONNECTION, AT THE CHIN AREA OF THE MASK, IS A MEDIUM-LIGHT GREY CIRCLE, EMBOSSED WITH “MSA – U.S. PAT. 4,007,758”. TO THE RIGHT OF THE HOSE ATTACHEMENT HANDWRITTEN IN GREEN INK IS “#4”. ON THE RIGHT SIDE OF THE MASK, BETWEEN THE “NECK” AND “SIDE” STRAPS IS A FAINT STAMP IN YELLOW “7-212-“. EMBOSSED IN CENTRE OF MASK, ABOVE FACE VISOR, IS “MSA” IN A CIRCLE. INSIDE OF THE HOSE ATTACHMENT, BELOW THE MOULDED NOSE AREA, IS A BLACK DISK WITH HOLES IN IT. VISIBLE THROUGH THESE HOLES IS A PIECE OF GOLD-COLOURED METAL. DIMENSIONS OF MASK: HOSE IS 83.5CM LONG; VISOR IS 18CM WIDE. .D: STRAP ON MASK. BLACK FABRIC STRAP, WITH TWO BLACK SNAPS. SNAPS ONTO SILVER-COLOURED METAL RING AROUND THE HOSE. STRAP IS 92.5CM LONG AND 1.9CM WIDE. OVERALL CONDITION OF B, C, D: WELL WORN. ALL STICKERS SHOW SIGNS OF WEAR: DISCOLOURATION AND FINISH OF STICKERS SCRATCHED. STRUCTRUALLY IN GOOD CONDITION. MANY SCUFFS AND SCRATCHES ALL OVER. ALL FABRIC IN GOOD CONDITION. RUBBER RETAINS FLEXIBILITY AND PLASTICS ARE IN GOOD SHAPE WITH NO CRACKS. .E: PAPER PASS CERTIFICATE. GOLDENROD COLOURED PAPER. READS: "MSA - ULTRALITE DP - B.M.R. C/W FACEMASK. THIS UNIT TESTED AND HAD ACCEPTABLE PERFORMANCE ON SEPTEMBER 02, 2008. KEN HOBIAK" (WITH KEN'S SIGNATURE ABOVE HIS TYPED NAME). REVERSE OF PAPER: "THIS UNI PERFORM KEN H" (APPEARS TO HAVE MISPRINTED ON THIS SIDE). PAPER IS STANDARD LETTER SIZE. CONDITION IS GOOD: PAPER HAS BEEN CRUMBLED AND HAS A FEW SMALL TEARS AROUND THE OUTSIDE.
Subjects
MINING & MINERAL HARVESTING T&E
Historical Association
SAFETY SERVICES
History
THIS SELF-CONTAINED BREATHING APPARATUS (SCBA) WAS USED BY THE LETHBRIDGE FIRE DEPARTMENT. IN A WRITTEN STATEMENT PROVIDED AT THE TIME OF DONATION, JESSE KURTZ, DEPUTY CHIEF – SUPPORT SERVICES (RETIRED), EXPLAINED THAT THE MASK WAS “USED BY ALL FIREFIGHTERS TO CONNECT TO THE BELT MOUNTED REGULATOR SCBA TO ENTER HAZARDOUS ATMOSPHERES” AND THAT THE HARNESS WAS “USED BY ALL FIREFIGHTERS TO BREATH IN HAZARDOUS (SMOKY) ATMOSPHERES.” HE CONTINUED SAYING THAT THERE ARE “MORE MODERN MASK MOUNTED REGULATOR SCBAS [THAT HAVE BEEN] DEVELOPED AND PURCHASED.” IN THE SUMMER OF 2015, COLLECTIONS TECHNICIAN KEVIN MACLEAN, CONDUCTED A SERIES OF INTERVIEWS WITH CURRENT AND FORMER MEMBERS OF THE FIRE DEPARTMENT, INCLUDING: CLIFF “CHARLIE” BROWN (HIRED IN 1966, RETIRED 2004), TREVOR LAZENBY (HIRED IN 1994), AND LAWRENCE DZUREN (HIRED 1959, RETIRED 1992). BROWN EXPLAINED THAT THIS SCBA “WAS AN ON-DEMAND REGULATOR. THAT WAS NICE TO HAVE DEMAND, BECAUSE NO MATTER WHO IT WAS, THE HARDER YOU BREATHED, THE MORE AIR IT WOULD GIVE YOU. THE HARNESS IS PROBABLY MORE COMFORTABLE [THAN PREVIOUS ONES]. SOME GUYS WOULD USE THREE TANKS, SO THE HARNESS WAS A LITTLE BIT MORE COMFORTABLE FOR THEM. THEY’D COME OUT, THEY’D TURN AROUND, THEY WOULDN’T EVEN TAKE OFF THEIR GEAR. THEY’D TURN AROUND, THERE’D BE GUYS WHO WOULD TAKE THE TANK OFF, PUT ANOTHER TANK ON, HOOK IT ALL UP, A GOOD PAT ON THE BACK, AND BACK IN THEY’D GO WITH ANOTHER TANK. THEY’D DO THAT THREE TIMES BEFORE … THEY WERE JUST TOO TIRED … WE DIDN’T HAVE AN AIR COMPRESSOR TO FILL OUR OWN TANKS. I CAN’T REMEMBER WHERE THEY WENT. THEY MUST HAVE WENT TO THE SWIMMING POOL.” LAZENBY CONTINUED SAYING THAT THIS SCBA WAS “A VERY, VERY OLDER GENERATION SCBA BOTTLE. THESE WERE KIND OF RUDIMENTARY DESIGN. THE BOTTLE WAS STEEL ON THESE, WHICH MADE THEM VERY, VERY HEAVY. MODERN BOTTLES ARE FIBERGLASS WRAPPED WHICH MAKES THEM MUCH, MUCH LIGHTER; ADDED TO WHICH, IT HAD A BARELY PADDED HARNESS SYSTEM ON IT AND BASICALLY A GLORIFIED SEATBELT STRAP FOR A WAIST STRAP. SO WITH THESE KINDS OF THINGS, YOU DON’T WANT TO KEEP A TON OF WEIGHT ON YOUR SHOULDERS BECAUSE IT FATIGUES YOUR UPPER BODY VERY, VERY QUICKLY WHEN YOU’RE WORKING. BUT WITH THIS TYPE OF HARNESS ON THEM, IF YOU CINCHED THE WAIST UP REALLY TIGHT AND TOOK THE PRESSURE OFF YOUR SHOULDERS, THIS JUST SEEMED TO DIG INTO YOUR WAIST LIKE CRAZY, LIKE IT WAS VERY UNCOMFORTABLE TO WEAR … THAT BEING SAID, WHEN GUYS WENT TO THIS FROM LIKE THE CANISTERS THAT THEY USED TO WEAR, THIS MUST HAVE BEEN LIKE A NEW LEASE ON LIFE FOR THESE GUYS … I WORE THESE IN TRAINING – I DON’T THINK I EVER WORE ONE OF THESE BOTTLES ON AN ACTUAL FIRE CALL … WE HAD THE FIBERGLASS ONES IN FRONTLINE SERVICE WHEN I STARTED SO THIS WOULD BE PRE-1994, IF I’M NOT MISTAKEN. I DON’T THINK WE HAD THESE ON THE TRUCKS IN ’94. THEY WERE AROUND AND THEY WERE BACKUPS, BUT THEY WEREN’T FRONTLINE.” HE ELABORATED FURTHER, SAYING: “WE DIDN’T HAVE INDIVIDUAL MASKS; WE SHARED MASKS ON THE FIRE DEPARTMENT BACK THEN … THERE WASN’T ENOUGH MONEY FOR THEM TO BUY US OUR OWN INDIVIDUAL FACE PIECE … SO WHAT WE USED TO DO IS AFTER EVERY INCIDENT OR AFTER EVERY TIME YOU WORE ONE OF THESE THINGS, IT WOULD COME OFF THE TRUCK, WE WOULD HAVE A BOTTLE OF MSA MASK CLEANER THAT WE WOULD PUT INTO A TUB, WE WOULD MAKE A SOAPY WATER SOLUTION, WE WOULD WASH THE MASK, RINSE THE MASK, LET IT HANG TO DRY, AND THE NEXT PERSON WOULD USE IT AS THE NEXT SHIFT CAME ON.” HE ADDED THAT NOW EVERYONE IN THE DEPARTMENT HAS THEIR OWN MASK: “WE’VE HAD OUR OWN MASKS FOR 10-12 YEARS. WE STILL SHARE THE SCBAS AS FAR AS THE BOTTLE AND THE HARNESS GOES … THEY’RE IN THE RACKS ON THE TRUCK, IN THE BACKS OF THE SEATS AND DOWN IN BY THE HOSE OR THE PUMP COMPARTMENTS.” IN DISCUSSING WHY THIS MODEL IS NO LONGER USED, LAZENBY STATED: “THIS HOSE EASILY CRIMPED SO YOUR AIR SUPPLY COULD BE CUT OFF. THE AIR SUPPLY THAT NOW GOES FROM THE TANK TO YOUR MASK IS A MUCH MORE RIGID HOSE THAT, REALLY, YOU’D HAVE TO BASICALLY BEND IT IN HALF TO STOP THE FLOW OF AIR.” DZUREN ADDED FURTHER: “PRIOR TO [THIS] OUR BREATHING APPARATUS WAS WHAT THEY CALLED A CANISTER TYPE OF BREATHING APPARATUS … IT WAS JUST A CANISTER THAT YOU HAD IN FRONT OF YOU HERE AND IT WAS LAYERS OF … GEL, AND SAND, AND SILICA … THERE WAS A SHELF-LIFE WITH THOSE THINGS. IF YOU USED THEM, YOU PRETTY WELL HAD TO DISCARD THEM AFTER YOU USED THEM.” WHEN ASKED WHEN THIS TYPE OF SCBA CAME INTO SERVICE, DZUREN STATED: “I WOULD PROBABLY SAY MAYBE IN THE ‘70S SOMETIME? … I RECALL GUYS GOING IN WHEN WE JUST HAD THOSE CANISTERS. THEY WOULD GO WITHOUT ANYTHING. AND THEY WOULD COME OUT AFTER A WHILE AND THEY WOULD BE BARFING THEIR GUYS OUT … IT SEEMED TO BE, EVEN PRIOR TO MY TIME, WHEN THE STORIES I HEARD FROM GUYS THERE LONGER THAN MYSELF, THAT SEEMED TO BE THE MACHO THING. GET IN THERE AND THEY’D GET IN THERE WITHOUT A MASK. BUT EVENTUALLY, YOU KNOW, BETTER THINKING CAME ALONG AND SAID ‘DON’T BE SILLY, GET SOME STUFF ON THERE.’ BUT ONCE THEY GOT IT, AND THEY STARTED TO USE IT, YOU DID FEEL A LOT BETTER GOING IN, ‘CAUSE PRIOR TO USE GETTING THAT WE HEARD THE HORROR STORIES OF GUYS WHO DID SUCCUMB TO THE ELEMENTS BECAUSE OF ALL THOSE CANISTER TYPES, BUT ONCE THEY GOT [THIS SCBA] IT WAS BETTER.” SEE PERMANENT FILE FOR FULL INTERVIEW TRANSCRIPTS AND ADDITIONAL INFORMATION ABOUT THE LETHBRIDGE FIRE DEPARTMENT.
Catalogue Number
P20150010017
Acquisition Date
2015-02
Collection
Museum
Images
Less detail

6 records – page 1 of 1.