Skip header and navigation

3 records – page 1 of 1.

Other Name
"MARQUIS HOTEL"
Date Range From
1928
Date Range To
2015
Material Type
Artifact
Materials
CERAMIC, PAINT
Catalogue Number
P20150037000
  1 image  
Material Type
Artifact
Other Name
"MARQUIS HOTEL"
Date Range From
1928
Date Range To
2015
Materials
CERAMIC, PAINT
No. Pieces
1
Height
5.08
Width
12.4
Description
BLACK, CERAMIC ASHTRAY. THE INSIDE OPENING OF THE ASHTRAY IS 6.4 CM. THE LETTERING ON THE TOP SAYS “THE MARQUIS HOTEL, LETHBRIDGE, ALBERTA, CANADA.” THERE IS AN ABSTRACTED FLORAL DESIGN ON EITHER SIDE OF THIS LETTERING. THE FLOWERS ARE PAINTED RED AND THEIR STEMS PAINTED GREEN. THIS WORDING AND DESIGN REPEATS ON THE OPPOSITE SIDE. THE LETTERING ON THE BOTTOM SAYS, “MADE IN JAPAN 29.” VERY GOOD CONDITION. USED WITH SOME WEAR APPARENT. BLACK PAINT IS WEARING OFF ON SOME PARTS OF THE SURFACE. SIGNIFICANT WEAR TO THE RED AND GREEN PAINT OF THE DECALS.
Subjects
HOUSEHOLD ACCESSORY
Historical Association
DOMESTIC
BUSINESS
History
ON DECEMBER 16, 2015, DONOR CHRIS MORRISON INFORMED COLLECTIONS TECHNICIAN KEVIN MACLEAN THAT SHE CAME INTO POSSESSION OF THE ASHTRAY WHEN SHE AND HER HUSBAND BECAME STEWARDS OF A WATERTON CABIN IN 1976. THE CABIN, LOCATED AT 103 CAMERON FALLS, WAS OWNED BY HER MOTHER-IN-LAW DOROTHY MORRISON (D. 1995). IT WAS AMONG ASSORTED FURNISHINGS LEFT BEHIND WHEN DOROTHY MOVED OUT AND CHRIS MOVED IN. THE DONOR’S RECOLLECTION OF THE ASHTRAY’S USE IMMEDIATELY PRIOR TO IT BECOMING HER PROPERTY WAS AS A CONTAINER. MORRISON SAID, “IT WAS IN A [CABIN] WASHSTAND AND USED TO HOLD LITTLE OBJECTS LIKE ROLLED UP KEROSENE LANTERN TAPE WICKS”. ACCORDING TO MORRISON, IT WAS ALSO KNOWN AS “GRANDPA’S ASHTRAY”. GRANDPA REFERS TO JAMES J. MORRISON OF LETHBRIDGE. “HE ONLY SMOKED CIGARS” SAID THE DONOR, WHEREAS HER MOTHER-IN-LAW DOROTHY DID NOT SMOKE AT ALL. THE ASHTRAY’S USE AS A CONTAINER FOR LANTERN WICKS AND SMALL ITEMS CONTINUED RIGHT UP TO THE DAY THAT IT WAS OFFERED TO THE GALT IN 2015. ACCORDING TO HER OBITUARY IN THE LETHBRIDGE HERALD, DOROTHY MORRISON, PASSED AWAY IN LETHBRIDGE ON NOVEMBER 26, 1995 AT THE AGE OF 83 YEARS. JAMES JACOB MORRISON, DOROTHY’S FATHER-IN-LAW, PASSED ON FEBRUARY 18TH, 1975 AT AGE 93. THE ASHTRAY IS MARKED WITH “MARQUIS HOTEL,” WHICH COULD REFER TO THE LETHBRIDGE HOTEL THAT OPENED IN JUNE 1928. REALIZING A NEED FOR A FIRST-CLASS HOTEL IN LETHBRIDGE, ESPECIALLY ONE WITH A BANQUET HALL, THE BUSINESSMEN OF THE BOARD OF TRADE COMMITTED THEMSELVES TO THE HOTEL IN 1927. AFTER ITS OPENING, THE BOARD OF TRADE WOULD HOLD THEIR REGULAR, NOON-HOUR MEETINGS AT THE HOTEL FOR MANY YEARS TO COME. THE HOTEL CLOSED ITS DOORS IN 1985 AND THE BUILDING WAS DEMOLISHED IN 1988. THIS INFORMATION COMES FROM LETHBRIDGE HERALD ARTICLES AND A WRITE-UP ABOUT THE HOTEL IN THE PUBLICATION TITLED "WHERE WAS IT? A GUIDE TO EARLY LETHBRIDGE BUILDINGS," BY IRMA DOGTEROM. PLEASE SEE PERMANENT FILE FOR MORE INFORMATION INCLUDING LETHBRIDGE HERALD ARTICLES AND A COPY OF THE INFORMATION FROM THE PUBLICATION CITED ABOVE.
Catalogue Number
P20150037000
Acquisition Date
2015-12
Collection
Museum
Images
Less detail
Other Name
RAILWAY SWITCH / C.P.R.
Date Range From
1970
Date Range To
1980
Material Type
Artifact
Materials
BRASS, COPPER, METAL
Catalogue Number
P20150023000
  2 images  
Material Type
Artifact
Other Name
RAILWAY SWITCH / C.P.R.
Date Range From
1970
Date Range To
1980
Materials
BRASS, COPPER, METAL
No. Pieces
5
Length
12.3
Width
2.1
Description
5 RAILWAY KEYS OR SWITCHES ON A KEYRING. .A: BRASS. 5.0CM X 2.4CM (L X W). SKELETON KEY. ROUND TOP, WITH A SQUARE HOLE IN THE MIDDLE. AROUND THE TOP EDGE OF THE CIRCLE, STAMPED "C.P.R.". "T" STAMPED BELOW AND TO THE LEFT OF THE "C". ILLEGIBLE MAKER'S MARK ON THE OTHER SIDE OF THE KEY. .B: SILVER COLOURED METAL. 5.3CM X 2.5CM (L X W). ROUND TOP, WITH A SMALL ROUND HOLE NEAR THE TOP. EMBOSSED "103" ON ONE SIDE OF THE ROUND TOP AND STAMPED "CPR" ON THE OTHER. .C: COPPER. 5.2CM X 2.3CM (L X W). ROUND TOP, WITH A MEDIUM SIZED CIRCULAR HOLE IN THE CENTRE. AROUND THE EDGE, EMBOSSED WITH "R. M. CO." OPPOSITE SIDE HAS "C.P.R." EMBOSSED ALONG THE TOP, WITH AN "S" EMBOSSED BELOW AND TO THE LEFT OF THE "C". .D: BRASS. 5.0CM X 2.2CM (L X W). ROUND TOP, WITH A MEDIUM SIZED CIRCULAR HOLE IN THE CENTRE. AROUND THE EDGE, STAMPED WITH "C.P.R.". MAKER'S MARK STAMPED ON REVERSE: "...ITCHE... CANADA" .E: COPPER. 12.3CM X 2.1CM (L X W). ROUND TOP, WITH A MEDIUM SIZED CIRCULAR HOLE IN THE CENTRE. NO IDENTIFYING MARKS. TEETH OF KEY FORM A SIDEWAYS 'E'. ALL KEYS IN GOOD TO VERY GOOD CONDITION. TWO COPPER KEYS HAVE TARNISHED.
Subjects
HOUSEHOLD ACCESSORY
Historical Association
TRANSPORTATION
History
THESE RAILWAY SWITCH KEYS WERE USED BY THE DONOR, ARNOLD “RED” ERVIN, WHEN HE WORKED ON THE RAILWAY. IN JULY 2015, COLLECTIONS TECHNICIAN KEVIN MACLEAN, CONDUCTED AN INTERVIEW WITH ARNOLD AND HIS WIFE JOYCE ERVIN. THE FOLLOWING INFORMATION COMES FROM THAT INTERVIEW. ARNOLD WAS BORN IN 1932 IN NIPIWIN, SK AND CAME TO LETHBRIDGE TO PLAY JUNIOR HOCKEY IN 1950. HE GOT A GOOD JOB WITH THE RAILWAY AND DECIDED TO STAY IN LETHBRIDGE. JOYCE WAS BORN IN 1931 IN FOREMOST, AB, ATTENDED MOUNT ROYAL COLLEGE IN CALGARY AND WORKED FOR SEVERAL YEARS IN CALGARY. SHE WORKED FOR THE GOVERNMENT, IN DEFENCE PRODUCTION, THEN WENT ON TO SHELL OIL. SHE MOVED TO LETHBRIDGE IN 1954 TO BE CLOSER TO HOME AND SHE GOT A JOB WITH THE RAILROAD. ARNOLD AND JOYCE MET THROUGH THEIR WORK AND WERE MARRIED IN 1955. SAID ARNOLD ABOUT THE KEYS: “[THESE ARE] OLD RAILROAD KEYS, UNLOCKED EVERY SWITCH FROM HERE TO VANCOUVER…I DIDN’T HAVE TO THROW SWITCHES BUT THERE WAS TIMES WHEN SNOW WAS TOO DEEP, YOU WERE OUT THERE SWITCHING, MAYBE [A TRAINMAN] WAS SICK AND YOU HAD TO GET OUT AND DO THAT…THEY’RE ALL THE SAME KEYS EXCEPT THIS ONE HERE (KEY E). ON THE PASSENGER TRAINS YOU HAD THOSE - YOU DIDN’T NEED THEM, BUT ONCE IN A WHILE IF YOU WERE OUT THERE…JUST HAD A FEW LOCKS THERE THAT EVERYBODY, EVERYBODY THAT WORKED ON THE PASSENGER TRAINS COULD UNLOCK CERTAIN [LOCKS]. THE BOTTOMS BELOW THERE, THEY USED TO UNLOCK THEM.” ARNOLD STARTED WORKING FOR THE RAILWAY IN 1951 IN THE ROUND HOUSE, AFTER DECIDING TO NOT PURSUE HOCKEY BEYOND THE JUNIOR LEVEL: “THEY PUT YOU IN [THE ROUND HOUSE] TEAMED UP, STARTED UNTIL YOU WORKED YOUR WAY UP TO A FIREMAN – FROM FIREMAN TO ENGINEER.” HE CONTINUED TO PLAY HOCKEY FOR FUN: “I STILL PLAYED HOCKEY WITH A BUNCH OF PEOPLE THAT [I] KNEW AND YOU DIDN’T HAVE TO GO ON TO THE BIG LEAGUES BUT JUST ENTERTAINMENT. LETHBRIDGE WAS A GOOD HOCKEY PLACE. AND A NICE CITY TO LIVE IN.” IN RECALLING HIS FIRST DAYS AND WEEKS AT HIS JOB, HE SAID: “WELL, IT WAS WORKING IN THE ROUNDHOUSE. THE ENGINES WERE THERE AND YOU HAD TO GET UP AND THERE WAS COAL ENGINES AND YOU HAD TO SHOVEL THE COAL TO GET IT BACK INTO PLACES WHERE IT WAS SUPPOSED TO BE, SO ALL OVER. … YEAH, TECHNICALLY THEY CALLED YOU A WIPER. YOU HAD TO GO IN AND CLEAN THE WINDOWS … FOR THE ENGINEER COMING OUT EVERYTHING HAD TO BE CLEAN OR HE CALLED YOU BACK UP AND YOU DID IT OVER AGAIN. SO, IT WAS BETTER TO DO IT GOOD AND GET IT DONE.” ARNOLD CONTINUED: “I LIKED WORKING WITH THE RAILROAD, ENJOYED IT, AND STARTED IN THAT ROUNDHOUSE AND YOU WORKED YOUR WAY UP TO A FIREMAN AND UP TO AN ENGINEER AND THEN I WAS IN CHARGE OF ALL THE ENGINEERS. SO IT WAS A CAREER FROM NOT EVEN KNOWING WHAT THE RAILROAD LOOKED LIKE TO FIFTY/FIFTY-ONE WHEN I FINISHED. … IT WAS A PRETTY COMPATIBLE BUNCH OF PEOPLE AND AS IT TURNED OUT THE MANAGER OF THE HOCKEY TEAM WAS YARDMASTER HERE SO KNOWING THE BOSS KIND OF HELPED A LITTLE BIT. HE WAS LOOKING AFTER THE YARDS AND HE WAS THE MANAGER OF THE JUNIOR HOCKEY TEAM UNTIL HE RETIRED FROM THE RAILROAD. IT WAS A GOOD PLACE TO WORK, PEOPLE TREATED YOU RIGHT.” STEAM ENGINES WERE STILL IN USE WHEN HE FIRST STARTED: “[THE STEAM ENGINES] WERE WHEN I FIRST STARTED YES. FROM STARTING IN THE SHOP YOU GREW UP TO BE ON A FIRE AND THEN ENGINES AND JUST ABOUT THAT TIME THE DIESEL ENGINES WERE COMING IN AND OPERATING AND [IT WAS A] TOTALLY DIFFERENT RAILROAD FROM A HAND-FIRED COAL ENGINE TO A DIESEL LOCOMOTIVE. SO, IT WAS QUITE INTERESTING AND IT EITHER COULD BE AS GOOD AS YOU WANTED OR AS BAD AS YOU WANTED. KINDA HAD NO BOSSES IN THE RAILROAD - YOU WERE KIND OF THE CREW - YOU HAD TO LIKE THE JOB OR YOU DIDN’T STAY THERE. AND I LIKED THE RAILROAD, LIKED THE TRAVELLING, TRAVELLING IN THE ENGINES AND SOME PEOPLE WOULD GIVE THEIR EYE TEETH TO GET UP ON ONE OF THEM ENGINES, RIDE UP TO CROWSNEST AND IN THE MOUNTAINS.” HE WAS NOT DISAPPOINTED TO SEE THE STEAM LOCOMOTIVES GO OUT OF SERVICE: “IF YOU HAD YOUR CHOICE TO GO ON A STEAM ENGINE ON A TRIP, GETTING ON A DIESEL ENGINE WAS A LOT EASIER THAN GETTING ON AN OLD COAL ENGINE, COAL-FIRED ENGINE, WHERE YOU BASICALLY TOOK COAL AND THREW IT IN THE BOILER. YOU TOOK IT FROM A CAR RIGHT BEHIND YOU AND PUT THE COAL IN THE ENGINES THEN BOIL IT AND THAT’S WHERE ALL THE POWER CAME FROM.” BY 1975, ARNOLD WAS WORKING AS AN ENGINEER FIREMAN AND CONTINUED TO RECEIVE ON THE JOB TRAINING: “YEAH, ALL ON-THE-JOB TRAINING. MOST OF IT - THERE WAS OTHER THINGS GOING ON BUT THE BASIC THING WAS DOING TRAINING AS AN ENGINEER TO BECOME AN ENGINEER. IT WAS WHERE I WANTED TO BE, WAS AN ENGINEER, AND THE RAILROAD WORKS IN SENIORITY - THEY DON’T CARE IF YOU’RE EVEN BETTER, YOU HAD TO WORK YOUR WAY THROUGH. WHEN THEY NEEDED YOU, YOU GOT THE BEST JOB WHEN YOU GOT MORE SENIORITY. IT WASN’T NECESSARILY ALWAYS THE BEST GUY [THAT] GOT IT, SENIORITY PREVAILED ON THE RAILROAD AND YOU GOT YOUR JOBS AS YOU BECAME OLDER … THE BETTER JOBS BEING MAYBE A DIESEL ENGINES ON ONE JOB AND A FIREMAN ON THE OTHER JOB.” HE RECALLED A COUPLE OF ACCIDENTS WHILE WORKING ON THE RAILROAD: WHILE WORKING AS AN ENGINEER, ARNOLD’S TRAIN HIT A CAR ON THE TRACKS NEAR BLAIRMORE AND HE RECALLED SEEING THE EYES OF THE CAR DRIVER: “I LOOKED UP AND [SAW] HER EYES LOOKING AT [ME].” ARNOLD REMEMBERED THAT ONE OF THE SCARIEST ROUTES WAS THE ONE GOING TO PINCHER CREEK, WHERE THERE WAS A HILL WITH A 2.3 GRADE, WHICH MADE CONTROLLING THE TRAIN CHALLENGING. HE SAID: “YOU’D LIKE TO KNOW IF YOU’D SET THE BRAKE, YOU HAD CONTROL OVER IT BUT IT WAS SUCH A HILL AND SUCH A HEAVY TRAIN BEHIND YOU THAT IT WAS SCARY SOMETIMES … THAT WAS A VERY INTERESTING TRIP DOWN THERE THEN WITH THE DOWN 2.3 GRADE AND THEN 100,000 TON POTASH BEHIND YOU, PUSHING YOU. … YOU KNOW TRAINS STOP BUT IT TOOK A LONG TIME TO STOP … EVERY BRAKE ON THE TRAIN IS ON AND YOU’D STILL GO ANOTHER HALF A MILE DOWN THE TRACK. NOBODY COULD BELIEVE YOU WHY YOU COULDN’T STOP THAT THING – IT DOESN’T WORK THAT WAY – YOU COULD HARDLY EXPLAIN THAT IT TAKES THAT LONG TO STOP A TRAIN, BUT IT DOES.” HE ALSO RECALLED A RUNAWAY TRAIN THAT HE WAS CALLED IN TO HELP WITH: “THEY STOPPED AT COLEMAN TO SET A CAR OFF AND DIDN’T PUT THE BRAKES ON [AND] THE AIR SLEAKED OFF [OF] THE AIRBRAKES … YOU HAD TO HAVE THE COMPRESSORS WORKING TO KEEP THE TRAINS PUMPED UP TO KEEP [THE] BRAKES ON AND IT STARTED CREEPING DOWN.” HE CONTINUED SAYING THAT THE TRAIN STARTED “GOING BACKWARDS AND AS THE HILL GOT A LITTLE STEEPER [THE TRAIN] GOT GOING FASTER AND IT CAME DOWN TO LUNDBRECK WHERE YOU GO ACROSS THE RIVER THERE [AT] THE BRIDGE. [AT] THAT TIME, I WAS MANAGEMENT, [SO] I GOT IN A CAR AND WENT UP THERE AND TOLD THEM EXACTLY WHERE THAT TRAIN WAS GOING TO BE. [THE TRAIN WAS MOVING] TOO FAST TO GO ON THE REVERSE CURVE JUST COMING INTO LUNDBRECK AND IT FLEW LIKE A PLANE INTO THE RIVER THERE.” IT WAS ESTIMATED THAT THE TRAIN WAS TRAVELLING AT MORE THAN SEVENTY MILES PER HOUR. ARNOLD SAID: “THERE’S A REVERSE CURVE JUST BEFORE YOU GET TO LUNDBRECK. [THE TRAIN] LIFTED UP QUITE A BIT BECAUSE IT WAS GOING WAY TOO FAST AND THEN WHEN IT REVERSED THE OTHER SIDE, IT DIDN’T COME DOWN ON THE RAILS - IT LIFTED AND EVERY CAR ENDED UP IN THE LUNDBRECK RIVER.” FOR ADDITIONAL INFORMATION, INCLUDING DETAILS ABOUT JOYCE ERVIN’S TIME WITH THE CPR, AND INTERVIEW TRANSCRIPT, SEE PERMANENT FILE.
Catalogue Number
P20150023000
Acquisition Date
2015-07
Collection
Museum
Images
Less detail
Other Name
SELF-CONTAINED BREATHING APPARATUS / AIR MASK AND HARNESS
Date Range From
1975
Date Range To
2000
Material Type
Artifact
Materials
PLASTIC, METAL, COTTON
Catalogue Number
P20150010017
  2 images  
Material Type
Artifact
Other Name
SELF-CONTAINED BREATHING APPARATUS / AIR MASK AND HARNESS
Date Range From
1975
Date Range To
2000
Materials
PLASTIC, METAL, COTTON
No. Pieces
5
Height
29.2
Length
68.8
Width
50.7
Description
SELF-CONTAINED BREATHING APPARATUS, INCLUDES CASE, HARNESS ASSEMBLY, MASK WITH STRAP, AND PAPER PASS CERTIFICATE. .A: CASE. BLACK MOULDED, TEXTURED PLASTIC CASE. ROUGHLY RECTANGULAR SHAPED. HINGED AT THE BACK, CASE HAS THREE HANDLES ON THE FRONT: ONE IS IN THE CENTRE OF THE CASE, WITH THE OTHER TWO ARE ON THE CORNERS OF THE BOX. THERE ARE TWO PLASTIC LATCHES BETWEEN THE THREE HANDLES. BLACK AND SILVER COLOURED STICKER ON THE TOP OF THE BOX READS: "MSA AIRMASK". A SECOND BLACK AND SILVER STICKER, ABOVE ONE OF THE LATCHES, READS: "ULTRALITE PRESSURE DEMAND" AND ALSO HAS "PASS IN BOX" HANDWRITTEN IN BLACKMARKER. A THIRD BLACK AND SILVER STICKER THAT READS "MSA AIRMASK" IS ON THE BOTTOM OF THE BOX. YELLOW PIECE OF DUCT TAPE ON RIGHT SIDE, HANDWRITTEN IN BLACK INK: "ULTRALITE BMR". INSIDE THE BOX IS SUBDIVIDED INTO COMPARTMENTS. AFFIXED TO THE INSIDE TOP OF THE LID IS A PAGE OF INSTRUCTIONS TITLED "MSA AIR MASK, PRESSURE DEMAND TYPE". A SMALL PIECE OF PAPER AFIXED TO THE INSIDE OF THE LID IS TITLED "PACKING ARRANGEMENT" AND HAS AN ILLUSTRATION OF HOW THE UNIT SHOULD BE PACKED AWAY. DIMENSIONS PROVIDED ABOVE CORRESPOND TO THIS CASE. OVERALL IN FAIR TO GOOD CONDITION. THE TWO "MSA AIRMASK" STICKERS HAVE PARTIALLY PEELED AWAY, WITH THE TOP STICKER MISSING THE BOTTOM OF "ASK" IN "MASK" AND WITH THE BOTTOM STICKER MISSING PARTS OF THE "MSA": THE "M" AND "A" ARE PARTIALLY MISSING, WHILE THE "S" IS ENTIRELY GONE; "MASK" OF THIS STICKER IS ALSO VERY DAMAGED. LATCH BELOW THE "ULTRALITE" STICKER IS IN GOOD CONDITION, WHILE THE OTHER IS PARTIALLY BROKEN. SEVERAL SCUFFS AND SCRATCHES IN THE PLASTIC, ESPECIALLY ALONG THE BOTTOM. .B: HARNESS ASSEMBLY. BLACK PLASTIC, METAL, AND FABRIC WITH SILVER COLOURED METAL. OUTER PORTION OF HARNESS DESIGNED TO HOLD BOTTLE OF COMPRESSED AIR. BLACK METAL BRACKET RUNS VERTICALLY UP AND DOWN THE HARNESS AND HAS A SILVER COLOURED CIRCULAR METAL BAND TO HOLD TANK IN PLACE. THE SILVER BAND IS 7.7CM WIDE AND HAS TWO BLACK STICKERS WITH “MSA” IN YELLOW STUCK ON. BOTTOM OF BLACK METAL BRACKET HAS A TRIANGULAR SHAPED PIECE, WITH A ROUND RUBBER TIP, TO HOLD THE BOTTOM OF THE AIR TANK IN PLACE. BELOW SILVER BAND IS A STICKER, WITH A DISCOLOURED WHITE BACKGROUND AND BLACK LETTERS GIVING INSTRUCTIONS FOR USE, ENTITLED: “CUSTOM 4500/ULTRALITE BELT MOUNTED SCBA. OPEN CIRCUIT, PRESSURE-DEMAND ENTRY AND ESCAPE SELF-CONTAINED BREATHING APPARATUS OR COMBINATION SELF-CONTAINED BREATHING APPARATUS AND TYPE C SUPPLIED AIR RESPIRATOR.” SILVER BAND FOR TANK HAS A HANDLE THAT EXPANDS AND CONTRACTS THE BAND, TO ALLOW FOR REMOVAL AND INSTALLATION OF AIR TANK. AT THE TOP OF THE BLACK METAL BRACKET, THERE IS A CIRCULAR SECTION WHICH ALLOWS FOR THE ATTACHMENT OF TWO BLACK PADDED FABRIC SHOULDER STRAPS. THESE STRAPS ARE BOLTED ON WITH BLACK AND SILVER COLOURED BOLTS. BLACK METAL BRACKET ATTACHES AT WAIST AREA TO BLACK MOULDED PIECE OF PLASTIC. BLACK MOULDED PLASTIC FITS AROUND THE HIP AREA OF THE WEARER. SHOULDER STRAPS COME DOWN FROM TOP OF METAL BRACKET AND ATTACH TO THIS BLACK PLASTIC JUST ABOVE THE HIP. SHOULDER STRAPS ARE PADDED AND HAVE A SECOND SMALLER STRAP, WHICH WOULD CROSS THE WEARER’S CHEST WITH A BLACK SIDE RELEASE PLASTIC BUCKLE, WITH THE FEMALE COMPONENT ON THE RIGHT STRAP. ON EACH STRAP BELOW THE PLASTIC BUCKLE IS A SILVER COLOURED “D” RING. ABOVE THE BUCKLE ON EACH STRAP IS A SILVER COLOURED SILK SCREEN SECTION WITH “MSA”. AT THE BOTTOM WAIST PORTION OF THE MOULDED PLASTIC IS ANOTHER BLACK FABRIC STRAP, TO GO AROUND THE WEARER’S WAIST. THE BELT ATTACHES WITH A SILVER COLOURED METAL LATCH PLATE ON THE RIGHT SIDE, WHICH FITS INTO A BLACK PLASTIC BUCKLE, WITH A BLACK PLASTIC BUTTON TO RELASE, ON THE WEARER’S LEFT SIDE. ATTACHED TO THE LEFT SIDE OF THE BELT IS A PRESSURE REGULATOR AND HIGH PRESSURE SUPPLY HOSE. THE PRESSURE REGULATOR CONSISTS OF BLACK METAL AND PLASTIC, AND GOLD AND RED COLOURED METAL. A CIRCULAR GOLD COLOURED METAL PIECE HAS REMNANTS OF TWO STICKERS ON ITS FACE: “MSA AIR MASK – MFD BY MINE SAFETY APPLIANCES COMPANY – PITTSBURGH, PENNSYLVANIA – PRESSURE DEMAND.” BELOW IT IS A HOSE COUPLING. THIS COUPLING HAS A BLACK RUBBER CAP, EMBOSSED WITH “FHR”. BESIDE THIS IS AN AIR PRESSURE GAUGE: BLACK METAL TEXTURED EDGE, GLASS FACE, AND RUBBER ENCASING. THE FACE OF THE GAUGE IS OFF-WHITE WITH A DIAL INCREASING IN INCREMENTS OF 5 (5, 10, 15, 20, 25, 30), WITH A RED SECTION FROM 0-5, A YELLOW SECTION BETWEEN 20 AND 25, AND A GREY SECTION AT 30. BELOW THE DIAL IS “PSI X 100 – USE NO OIL – MSA 18” BESIDE THE GAUGE IS A RED COLOURED METAL KNOB, WITH “ß OPEN – BY PASS” EMBOSSED ON FRONT FACE. BESIDE THIS RED KNOB IS A GOLD COLOURED KNOB WITH A SILVER COLOURED TAB “^PUSH^”. ON THE FACE OF THE GOLD KNOB, EMBOSSED, IS “MAIN LINE ^” WITH “MSA” IN CENTRE. OPPOSITIE THE PRESSURE GAUGE IS A HIGH PRESSURE SUPPLY HOSE. THE HOSE IS BLACK PLASTIC AND FABRIC. ON THE END OF THIS HOSE IS A SILVER COLOURED BELL, USED AS A LOW AIR ALARM. AT THE VERY END OF THE HOSE IS A BLACK TEXTURED METAL COUPLING. .C: MASK WITH HOSE. BLACK PLASTIC RESPIRATOR MASK WITH CLEAR PLASTIC VISOR. FITTED NOSE PIECE WITH TWO SMALL CIRCLES ON EITHER SIDE OF BRIDGE OF NOSE PIECE. EACH CIRCLE HAS BLACK PLASTIC SPOKES AND A TRANSPARENT FLAP, WHICH IS ON THE INSIDE OF THE NOSE PIECE. HANDWRITTEN IN GOLD COLOURED INK, ON THE INSIDE OF NOSE PIECE, “G29C” OR “929C”. FRONT OF NOSE PIECE, VISIBLE THROUGH THE VISOR, HAS “MEDIUM” EMBOSSED ONTO MASK. FIVE BLACK PLASTIC STRAPS WITH SILVER COLOURED BUCKLES ALLOW MASK TO BE SECURELY TIGHTENED ONTO THE HEAD. STRAPS MEET AT A ROUGHLY STAR-SHAPED PIECE THAT SITS AT THE BACK OF THE HEAD. THIS STAR-SHAPED PIECE HAS THE FOLLOWING EMBOSSED ONTO THE PLASTIC: “M2 C5 – MSA – PULL FRONT STRAP LAST – U”. ABOVE THE “M2 C5” IS AN EMBOSSED MULTI-SPOKED CIRCLE. EMBOSSED IN THE CENTRE OF THE CIRCLE: “93 – 94 – 95” EACH OF THE FIVE STRAPS ARE LABELLED; TWO AT THE BASE OF MASK, EACH LABELLED “NECK”, NEXT TWO UP ARE “SIDE”, AND THE FIFTH STRAP AT THE TOP OF THE MASK IS “FRONT”. ON FRONT OF MASK, AT THE MOUTH AREA, IS A LONG ACCORDION-STYLE HOSE. IT IS ATTACHED TO THE MASK WITH A SILVER COLOURED METAL CLAMP. ON THE NUT OF THIS CLAMP IS WRITTEN “ALL STAINLESS BREEZE”. BELOW IS A BLACK METAL BAND, WHICH IS STAMPED IN YELLOW WITH “-18 TINNERMAN”. BELOW THAT THERE IS A SILVER COLOURED METAL RING, WHICH HAS A BLACK FABRIC STRAP ATTACHED (SEE BELOW FOR DESCRIPTION OF THIS ITEM, P20150010017D). THE BOTTOM OF THE HOSE HAS A BLACK METAL BAND AND THEN A SILVER COLOURED, TEXTURED METAL PIECE TO CONNECT TO THE AIR SUPPLY CANISTER. BELOW THE HOSE CONNECTION, AT THE CHIN AREA OF THE MASK, IS A MEDIUM-LIGHT GREY CIRCLE, EMBOSSED WITH “MSA – U.S. PAT. 4,007,758”. TO THE RIGHT OF THE HOSE ATTACHEMENT HANDWRITTEN IN GREEN INK IS “#4”. ON THE RIGHT SIDE OF THE MASK, BETWEEN THE “NECK” AND “SIDE” STRAPS IS A FAINT STAMP IN YELLOW “7-212-“. EMBOSSED IN CENTRE OF MASK, ABOVE FACE VISOR, IS “MSA” IN A CIRCLE. INSIDE OF THE HOSE ATTACHMENT, BELOW THE MOULDED NOSE AREA, IS A BLACK DISK WITH HOLES IN IT. VISIBLE THROUGH THESE HOLES IS A PIECE OF GOLD-COLOURED METAL. DIMENSIONS OF MASK: HOSE IS 83.5CM LONG; VISOR IS 18CM WIDE. .D: STRAP ON MASK. BLACK FABRIC STRAP, WITH TWO BLACK SNAPS. SNAPS ONTO SILVER-COLOURED METAL RING AROUND THE HOSE. STRAP IS 92.5CM LONG AND 1.9CM WIDE. OVERALL CONDITION OF B, C, D: WELL WORN. ALL STICKERS SHOW SIGNS OF WEAR: DISCOLOURATION AND FINISH OF STICKERS SCRATCHED. STRUCTRUALLY IN GOOD CONDITION. MANY SCUFFS AND SCRATCHES ALL OVER. ALL FABRIC IN GOOD CONDITION. RUBBER RETAINS FLEXIBILITY AND PLASTICS ARE IN GOOD SHAPE WITH NO CRACKS. .E: PAPER PASS CERTIFICATE. GOLDENROD COLOURED PAPER. READS: "MSA - ULTRALITE DP - B.M.R. C/W FACEMASK. THIS UNIT TESTED AND HAD ACCEPTABLE PERFORMANCE ON SEPTEMBER 02, 2008. KEN HOBIAK" (WITH KEN'S SIGNATURE ABOVE HIS TYPED NAME). REVERSE OF PAPER: "THIS UNI PERFORM KEN H" (APPEARS TO HAVE MISPRINTED ON THIS SIDE). PAPER IS STANDARD LETTER SIZE. CONDITION IS GOOD: PAPER HAS BEEN CRUMBLED AND HAS A FEW SMALL TEARS AROUND THE OUTSIDE.
Subjects
MINING & MINERAL HARVESTING T&E
Historical Association
SAFETY SERVICES
History
THIS SELF-CONTAINED BREATHING APPARATUS (SCBA) WAS USED BY THE LETHBRIDGE FIRE DEPARTMENT. IN A WRITTEN STATEMENT PROVIDED AT THE TIME OF DONATION, JESSE KURTZ, DEPUTY CHIEF – SUPPORT SERVICES (RETIRED), EXPLAINED THAT THE MASK WAS “USED BY ALL FIREFIGHTERS TO CONNECT TO THE BELT MOUNTED REGULATOR SCBA TO ENTER HAZARDOUS ATMOSPHERES” AND THAT THE HARNESS WAS “USED BY ALL FIREFIGHTERS TO BREATH IN HAZARDOUS (SMOKY) ATMOSPHERES.” HE CONTINUED SAYING THAT THERE ARE “MORE MODERN MASK MOUNTED REGULATOR SCBAS [THAT HAVE BEEN] DEVELOPED AND PURCHASED.” IN THE SUMMER OF 2015, COLLECTIONS TECHNICIAN KEVIN MACLEAN, CONDUCTED A SERIES OF INTERVIEWS WITH CURRENT AND FORMER MEMBERS OF THE FIRE DEPARTMENT, INCLUDING: CLIFF “CHARLIE” BROWN (HIRED IN 1966, RETIRED 2004), TREVOR LAZENBY (HIRED IN 1994), AND LAWRENCE DZUREN (HIRED 1959, RETIRED 1992). BROWN EXPLAINED THAT THIS SCBA “WAS AN ON-DEMAND REGULATOR. THAT WAS NICE TO HAVE DEMAND, BECAUSE NO MATTER WHO IT WAS, THE HARDER YOU BREATHED, THE MORE AIR IT WOULD GIVE YOU. THE HARNESS IS PROBABLY MORE COMFORTABLE [THAN PREVIOUS ONES]. SOME GUYS WOULD USE THREE TANKS, SO THE HARNESS WAS A LITTLE BIT MORE COMFORTABLE FOR THEM. THEY’D COME OUT, THEY’D TURN AROUND, THEY WOULDN’T EVEN TAKE OFF THEIR GEAR. THEY’D TURN AROUND, THERE’D BE GUYS WHO WOULD TAKE THE TANK OFF, PUT ANOTHER TANK ON, HOOK IT ALL UP, A GOOD PAT ON THE BACK, AND BACK IN THEY’D GO WITH ANOTHER TANK. THEY’D DO THAT THREE TIMES BEFORE … THEY WERE JUST TOO TIRED … WE DIDN’T HAVE AN AIR COMPRESSOR TO FILL OUR OWN TANKS. I CAN’T REMEMBER WHERE THEY WENT. THEY MUST HAVE WENT TO THE SWIMMING POOL.” LAZENBY CONTINUED SAYING THAT THIS SCBA WAS “A VERY, VERY OLDER GENERATION SCBA BOTTLE. THESE WERE KIND OF RUDIMENTARY DESIGN. THE BOTTLE WAS STEEL ON THESE, WHICH MADE THEM VERY, VERY HEAVY. MODERN BOTTLES ARE FIBERGLASS WRAPPED WHICH MAKES THEM MUCH, MUCH LIGHTER; ADDED TO WHICH, IT HAD A BARELY PADDED HARNESS SYSTEM ON IT AND BASICALLY A GLORIFIED SEATBELT STRAP FOR A WAIST STRAP. SO WITH THESE KINDS OF THINGS, YOU DON’T WANT TO KEEP A TON OF WEIGHT ON YOUR SHOULDERS BECAUSE IT FATIGUES YOUR UPPER BODY VERY, VERY QUICKLY WHEN YOU’RE WORKING. BUT WITH THIS TYPE OF HARNESS ON THEM, IF YOU CINCHED THE WAIST UP REALLY TIGHT AND TOOK THE PRESSURE OFF YOUR SHOULDERS, THIS JUST SEEMED TO DIG INTO YOUR WAIST LIKE CRAZY, LIKE IT WAS VERY UNCOMFORTABLE TO WEAR … THAT BEING SAID, WHEN GUYS WENT TO THIS FROM LIKE THE CANISTERS THAT THEY USED TO WEAR, THIS MUST HAVE BEEN LIKE A NEW LEASE ON LIFE FOR THESE GUYS … I WORE THESE IN TRAINING – I DON’T THINK I EVER WORE ONE OF THESE BOTTLES ON AN ACTUAL FIRE CALL … WE HAD THE FIBERGLASS ONES IN FRONTLINE SERVICE WHEN I STARTED SO THIS WOULD BE PRE-1994, IF I’M NOT MISTAKEN. I DON’T THINK WE HAD THESE ON THE TRUCKS IN ’94. THEY WERE AROUND AND THEY WERE BACKUPS, BUT THEY WEREN’T FRONTLINE.” HE ELABORATED FURTHER, SAYING: “WE DIDN’T HAVE INDIVIDUAL MASKS; WE SHARED MASKS ON THE FIRE DEPARTMENT BACK THEN … THERE WASN’T ENOUGH MONEY FOR THEM TO BUY US OUR OWN INDIVIDUAL FACE PIECE … SO WHAT WE USED TO DO IS AFTER EVERY INCIDENT OR AFTER EVERY TIME YOU WORE ONE OF THESE THINGS, IT WOULD COME OFF THE TRUCK, WE WOULD HAVE A BOTTLE OF MSA MASK CLEANER THAT WE WOULD PUT INTO A TUB, WE WOULD MAKE A SOAPY WATER SOLUTION, WE WOULD WASH THE MASK, RINSE THE MASK, LET IT HANG TO DRY, AND THE NEXT PERSON WOULD USE IT AS THE NEXT SHIFT CAME ON.” HE ADDED THAT NOW EVERYONE IN THE DEPARTMENT HAS THEIR OWN MASK: “WE’VE HAD OUR OWN MASKS FOR 10-12 YEARS. WE STILL SHARE THE SCBAS AS FAR AS THE BOTTLE AND THE HARNESS GOES … THEY’RE IN THE RACKS ON THE TRUCK, IN THE BACKS OF THE SEATS AND DOWN IN BY THE HOSE OR THE PUMP COMPARTMENTS.” IN DISCUSSING WHY THIS MODEL IS NO LONGER USED, LAZENBY STATED: “THIS HOSE EASILY CRIMPED SO YOUR AIR SUPPLY COULD BE CUT OFF. THE AIR SUPPLY THAT NOW GOES FROM THE TANK TO YOUR MASK IS A MUCH MORE RIGID HOSE THAT, REALLY, YOU’D HAVE TO BASICALLY BEND IT IN HALF TO STOP THE FLOW OF AIR.” DZUREN ADDED FURTHER: “PRIOR TO [THIS] OUR BREATHING APPARATUS WAS WHAT THEY CALLED A CANISTER TYPE OF BREATHING APPARATUS … IT WAS JUST A CANISTER THAT YOU HAD IN FRONT OF YOU HERE AND IT WAS LAYERS OF … GEL, AND SAND, AND SILICA … THERE WAS A SHELF-LIFE WITH THOSE THINGS. IF YOU USED THEM, YOU PRETTY WELL HAD TO DISCARD THEM AFTER YOU USED THEM.” WHEN ASKED WHEN THIS TYPE OF SCBA CAME INTO SERVICE, DZUREN STATED: “I WOULD PROBABLY SAY MAYBE IN THE ‘70S SOMETIME? … I RECALL GUYS GOING IN WHEN WE JUST HAD THOSE CANISTERS. THEY WOULD GO WITHOUT ANYTHING. AND THEY WOULD COME OUT AFTER A WHILE AND THEY WOULD BE BARFING THEIR GUYS OUT … IT SEEMED TO BE, EVEN PRIOR TO MY TIME, WHEN THE STORIES I HEARD FROM GUYS THERE LONGER THAN MYSELF, THAT SEEMED TO BE THE MACHO THING. GET IN THERE AND THEY’D GET IN THERE WITHOUT A MASK. BUT EVENTUALLY, YOU KNOW, BETTER THINKING CAME ALONG AND SAID ‘DON’T BE SILLY, GET SOME STUFF ON THERE.’ BUT ONCE THEY GOT IT, AND THEY STARTED TO USE IT, YOU DID FEEL A LOT BETTER GOING IN, ‘CAUSE PRIOR TO USE GETTING THAT WE HEARD THE HORROR STORIES OF GUYS WHO DID SUCCUMB TO THE ELEMENTS BECAUSE OF ALL THOSE CANISTER TYPES, BUT ONCE THEY GOT [THIS SCBA] IT WAS BETTER.” SEE PERMANENT FILE FOR FULL INTERVIEW TRANSCRIPTS AND ADDITIONAL INFORMATION ABOUT THE LETHBRIDGE FIRE DEPARTMENT.
Catalogue Number
P20150010017
Acquisition Date
2015-02
Collection
Museum
Images
Less detail