Skip header and navigation

7 records – page 1 of 1.

Other Name
PIN CARD W / ASSORTED PINS
Date Range From
1950
Date Range To
1993
Material Type
Artifact
Materials
FELT, PAPER, METAL
Catalogue Number
P20160017004
  2 images  
Material Type
Artifact
Other Name
PIN CARD W / ASSORTED PINS
Date Range From
1950
Date Range To
1993
Materials
FELT, PAPER, METAL
No. Pieces
1
Length
14.8
Width
13.4
Description
GREY CARDBOARD PIN CARD LINED WITH RED FELT ON FRONT, IN THE SHAPE OF A MAPLE LEAF. PIN CARD HAS PINS ATTACHED INCLUDING: “LIONS INTERNATIONAL” SERVICE PIN COMPRISED OF GOLD SHIELD WITH VIOLET CENTER AND GOLD “L”, WITH RED, WHITE, AND BLUE CHEVRON BELOW SHIELD AND THREE VIOLET CHEVRONS BELOW, WITH BRASS BACKING; BOY SCOUTS PIN COMPRISED OF UNPAINTED FLEUR DE LIS ON YELLOW BACKGROUND WITH GREEN BANNER BELOW AND TEXT “GROUP COMMITTEE”, WITH TARNISHED SILVER BACKING; SECOND DIVISION OFFICERS MILITARY PIN OF VIOLET WITH SYMBOL OF “C” WITH TWO LINES THROUGH IT ON FRONT, WITH BRASS BACKING; TARNISHED “GENERAL SERVICE” PIN COMPRISED OF SHIELD WITH THREE MAPLE LEAVES ON FRONT AND TEXT “GENERAL SERVICE” ALONG LOWER EDGE OF SHIELD, WITH BRASS BACKING; ROYAL CANADIAN LEGION 25 YEARS PIN COMPRISED OF GOLD SHIELD WITH WHITE CENTER AND RED MAPLE LEAF, WITH GOLD “25” ON MAPLE LEAF, AND VIOLET BANNER BELOW WITH GOLD TEXT “LEGION”, WITH BRASS BACKING; ROTARY CLUB PIN COMPRISED OF GOLD WHEEL WITH VIOLET RING AROUND OUTER EDGE OF WHEEL AND GOLD TEXT “ROTARY INTERNATIONAL”, WITH GOLD BACKING; CANADIAN HEART ASSOCIATION PIN COMPRISED OF GOLD HEART WITH RED FRONT, WHITE MAPLE LEAF IN CENTER, AND BLACK TORCH WITH YELLOW FLAME ON LEAF, WITH NO BACKING; ALBERTA CIVIEL DEFENSE PIN COMPRISED OF ALBERTA SHIELD BETWEEN GOLD LETTERS ON VIOLET BACKGROUNDS “C” AND “D”, WITH BRASS BACKING; TARNISHING DOMINION LEGION PIN COMPRISED OF ROUND SHIELD WITH BLUE AND RED BRITISH FLAG IN CENTER WITH MAPLE LEAF OVERLAID, AND TEXT AROUND EDGES “DOMINION GENERAL SERVICE LEAGUE, CANADIAN, LEGION”, WITH BRASS BACKING; SMALL MASONIC PIN COMPRISED OF MASONIC COMPASS WITH VIOLET CENTER AND EMBOSSED “G”, WITH SILVER BACKING; GOLD LIONS CLUB PAST PRESIDENT PIN COMPRISED OF GOLD SHIELD WITH VIOLET CENTER, EMBOSSED “L” AND GOLD BANNER ACROSS FRONT WITH TEXT “PAST PRES” AND TEXT EMBOSSED AT TOP AND BOTTOM EDGES OF SHIELD “LIONS CLUB”, PIN HAS ATTACHMENT OF GOLD BANNER WITH EMBOSSED TEXT “100% ATTENDANCE” AND SHIELD BELOW BANNER WITH WHITE BACKGROUND AND GOLD TEXT “20”, WITH SILVER BACKING. CARDBOARD BACKING ON CARD IS PEELING IN LOWER RIGHT CORNERS; BACK HAS CUTS DOWN RIGHT AND LEFT EDGES; STEM OF MAPLE LEAF IS SEVERELY CREASED AND BENT. OVERALL VERY GOOD CONDITION.
Subjects
PERSONAL SYMBOL
Historical Association
COMMEMORATIVE
ASSOCIATIONS
History
ON SEPTEMBER 16, 2016, COLLECTIONS TECHNICIAN KEVIN MACLEAN INTERVIEWED CHRIS AINSCOUGH REGARDING HIS DONATION OF A COLLECTION OF MILITARY OBJECTS. THE OBJECTS BELONGED TO AISNCOUGH’S GRANDFATHER AND FATHER, WILLIAM GEORGE AINSCOUGH (FIRST WORLD WAR) AND REED WILSON AINSCOUGH (SECOND WORLD WAR AND POST-WAR). THE DONOR’S GREAT GRANDFATHER, WILLIAM THOMAS AINSCOUGH, MARRIED MARGARET A. AINSCOUGH IN 1878 AND EMIGRATED FROM SMITHFIELD, UTAH TO CANADA IN 1898, BRINGING SIX CHILDREN, AGED 1 TO 18, WITH THEM. WILLIAM GEORGE AINSCOUGH, THE DONOR’S GRANDFATHER, WAS AMONG THE CHILDREN (BORN 1885). THE AINSCOUGHS INITIALLY SETTLED IN WHISKEY GAP, ALBERTA, BEFORE RELOCATING TO WOOLFORD, ALBERTA. ACCORDING A RESUME FOR REED W. AINSCOUGH INCLUDED IN THE PERMANENT FILE, REED WILSON AINSCOUGH WAS BORN ON JUNE 21, 1918 IN CARDSTON, ALBERTA. IN 1940, REED AINSCOUGH JOINED THE 93RD BATTERY OF THE ROYAL CANADIAN ARTILLERY [RCA] STATIONED AT FORT MACLEOD, ALBERTA, AND WAS PROMOTED TO A SECOND LIEUTENANT. REED AINSCOUGH WAS POSTED OVERSEAS IN 1942 AND SERVED UNTIL HIS DISCHARGE ON JANUARY 8, 1946. LETHBRIDGE HERALD ARTICLES REPORTED REED AINSCOUGH AS BEING IN THE THICK OF THE FIGHTING IN FRANCE, NOTABLY AT CAEN. IT WAS REPORTED IN THE LETHBRIDGE HERALD IN 1944 THAT REED AINSCOUGH WAS PROMOTED TO CAPTAIN, AND WAS WOUNDED IN HIS LEG IN OCTOBER 1944. REED AINSCOUGH WAS SENT TO BELGIUM FOR SURGERY AND TO BE HOSPITALIZED, AND WAS RETURNED TO CANADA ON THE HOSPITAL SHIP H.M.C.S. LADY NELSON IN 1945. IN 1947, REED AINSCOUGH BECAME THE BATTERY COMMANDER OF THE 93RD BATTERY RCA, AND SERVED AS THE COMMANDER UNTIL 1959, BEING PROMOTED TO MAJOR IN 1951. IN 1959, UPON A TRANSFER WITH HIS EMPLOYMENT AT CANADA LIFE, HE MOVED TO MEDICINE HAT, ALBERTA, AND JOINED THE SOUTH ALBERTA LIGHT HORSE AS A SQUADRON COMMANDER IN 1961. IN 1964, HE WAS PROMOTED TO LIEUTENANT COLONEL AND COMMANDER OF THE SOUTH ALBERTA LIGHT HORSE, AND WAS APPOINTED AIDE-DE-CAMP TO LIEUTENANT GOVERNOR GRANT MACEWAN UNTIL HIS RETIREMENT. REED AINSCOUGH WAS PROMOTED TO BRANCH MANAGER OF CANADA LIFE IN LETHBRIDGE, ALBERTA, IN 1969 AND MOVED TO LETHBRIDGE. REED AINSCOUGH WAS A MEMBER OF THE MASONIC LODGE, LODGE OF PERFECTION, ROSE CROIX, CONSISTORY, SHRINE, ORDER OF THE EASTERN STAR, AND SERVED AS THE MASTER OF THE LODGE OF PERFECTION UNTIL 1977. ACCORDING TO HIS LETHBRIDGE HERALD OBITUARY, REED AINSCOUGH WAS ALSO ACTIVE WITH THE FORT MACLEOD CHAMBER OF COMMERCE, LIONS’ CLUB, HISTORICAL ASSOCIATION, AND FORT MACLEOD MUSEUM DURING HIS TIME LIVING IN FORT MACLEOD. IN MEDICINE HAT, AISNCOUGH SERVED AS PRESIDENT OF THE HEART AND STROKE ASSOCIATION, AND ACTED AS A SENATOR FOR THE UNIVERSITY OF LETHBRIDGE UPON MOVING TO THE CITY. ON OCTOBER 20, 1993, REED WILSON AINSCOUGH PASSED AWAY IN LETHBRIDGE. AINSCOUGH ELABORATED ON HIS MOTIVES FOR DONATING THE COLLECTION, STATING, “I THINK [THE OBJECTS ARE] A BIG PART OF SOUTH ALBERTA’S HISTORY. DAD WAS VERY ACTIVE IN THE MILITARY AND THE MILITIA FOR MANY YEARS. I THINK THAT’S THE BIGGEST PART [OF WANTING TO DONATE THE OBJECTS]…IT’S DIVESTING, BECAUSE AFTER MY DAD DIED [IN 1992], MY MOTHER STAYED IN THE HOUSE FOR ABOUT 5 YEARS, AND THEN SHE MOVED OUT TO THE COAST. IT WAS AT THAT TIME, WHEN WE WERE GOING THROUGH THE STUFF IN THE HOUSE, THAT WE THOUGHT THIS IS A GOOD TIME TO GET IT DOWN TO SOMEPLACE LIKE THE GALT THAT WOULD LOOK AFTER IT.” FOR MORE INFORMATION INCLUDING FAMILY MILITARY SERVICE FILES, NEWSPAPER CLIPPINGS ON WILLIAM GEORGE AND REED AINSCOUGH, A RESUME FOR REED AINSCOUGH, AND THE FULL INTERVIEW TRANSCRIPTION, PLEASE SEE THE PERMANENT FILE P20160017001-GA.
Catalogue Number
P20160017004
Acquisition Date
2016-06
Collection
Museum
Images
Less detail
Other Name
32 DEGREE SCOTTSH RITE
Date Range From
1950
Date Range To
1993
Material Type
Artifact
Materials
GOLD, COTTON, BRASS
Catalogue Number
P20160017005
  2 images  
Material Type
Artifact
Other Name
32 DEGREE SCOTTSH RITE
Date Range From
1950
Date Range To
1993
Materials
GOLD, COTTON, BRASS
No. Pieces
1
Length
39
Width
14.3
Description
GOLD MEDAL ATTACHED TO RED COLLAR RIBBON WITH GOLD BORDERS. MEDAL SHAPED AT GOLD CROSS WITH CROSS PAINTED RED. CENTER OF CROSS HAS FOUR GOLD TRIANGLES SURROUNDING CIRCULAR CENTER PIECE; CENTER PIECE HAS LAUREL BRANCHES AROUND A BLUE BACKGROUND WITH “32” IN PAINTED IN GOLD. MEDAL IS ATTACHED TO COLLAR RIBBON WITH BRASS RINGS. COLLAR RIBBON HAS SILVER RING AND HOOK FOR SECURING RIBBON; BACK OF RIBBON IS WHITE WITH GOLD BORDERS. BACK OF MEDAL IS GOLD. RIBBON HAS MINOR CREASING; OVERALL EXCELLENT CONDITION.
Subjects
PERSONAL SYMBOL
Historical Association
COMMEMORATIVE
ASSOCIATIONS
History
ON SEPTEMBER 16, 2016, COLLECTIONS TECHNICIAN KEVIN MACLEAN INTERVIEWED CHRIS AINSCOUGH REGARDING HIS DONATION OF A COLLECTION OF MILITARY OBJECTS. THE OBJECTS BELONGED TO AISNCOUGH’S GRANDFATHER AND FATHER, WILLIAM GEORGE AINSCOUGH (FIRST WORLD WAR) AND REED WILSON AINSCOUGH (SECOND WORLD WAR AND POST-WAR). THE DONOR’S GREAT GRANDFATHER, WILLIAM THOMAS AINSCOUGH, MARRIED MARGARET A. AINSCOUGH IN 1878 AND EMIGRATED FROM SMITHFIELD, UTAH TO CANADA IN 1898, BRINGING SIX CHILDREN, AGED 1 TO 18, WITH THEM. WILLIAM GEORGE AINSCOUGH, THE DONOR’S GRANDFATHER, WAS AMONG THE CHILDREN (BORN 1885). THE AINSCOUGHS INITIALLY SETTLED IN WHISKEY GAP, ALBERTA, BEFORE RELOCATING TO WOOLFORD, ALBERTA. ACCORDING A RESUME FOR REED W. AINSCOUGH INCLUDED IN THE PERMANENT FILE, REED WILSON AINSCOUGH WAS BORN ON JUNE 21, 1918 IN CARDSTON, ALBERTA. IN 1940, REED AINSCOUGH JOINED THE 93RD BATTERY OF THE ROYAL CANADIAN ARTILLERY [RCA] STATIONED AT FORT MACLEOD, ALBERTA, AND WAS PROMOTED TO A SECOND LIEUTENANT. REED AINSCOUGH WAS POSTED OVERSEAS IN 1942 AND SERVED UNTIL HIS DISCHARGE ON JANUARY 8, 1946. LETHBRIDGE HERALD ARTICLES REPORTED REED AINSCOUGH AS BEING IN THE THICK OF THE FIGHTING IN FRANCE, NOTABLY AT CAEN. IT WAS REPORTED IN THE LETHBRIDGE HERALD IN 1944 THAT REED AINSCOUGH WAS PROMOTED TO CAPTAIN, AND WAS WOUNDED IN HIS LEG IN OCTOBER 1944. REED AINSCOUGH WAS SENT TO BELGIUM FOR SURGERY AND TO BE HOSPITALIZED, AND WAS RETURNED TO CANADA ON THE HOSPITAL SHIP H.M.C.S. LADY NELSON IN 1945. IN 1947, REED AINSCOUGH BECAME THE BATTERY COMMANDER OF THE 93RD BATTERY RCA, AND SERVED AS THE COMMANDER UNTIL 1959, BEING PROMOTED TO MAJOR IN 1951. IN 1959, UPON A TRANSFER WITH HIS EMPLOYMENT AT CANADA LIFE, HE MOVED TO MEDICINE HAT, ALBERTA, AND JOINED THE SOUTH ALBERTA LIGHT HORSE AS A SQUADRON COMMANDER IN 1961. IN 1964, HE WAS PROMOTED TO LIEUTENANT COLONEL AND COMMANDER OF THE SOUTH ALBERTA LIGHT HORSE, AND WAS APPOINTED AIDE-DE-CAMP TO LIEUTENANT GOVERNOR GRANT MACEWAN UNTIL HIS RETIREMENT. REED AINSCOUGH WAS PROMOTED TO BRANCH MANAGER OF CANADA LIFE IN LETHBRIDGE, ALBERTA, IN 1969 AND MOVED TO LETHBRIDGE. REED AINSCOUGH WAS A MEMBER OF THE MASONIC LODGE, LODGE OF PERFECTION, ROSE CROIX, CONSISTORY, SHRINE, ORDER OF THE EASTERN STAR, AND SERVED AS THE MASTER OF THE LODGE OF PERFECTION UNTIL 1977. ACCORDING TO HIS LETHBRIDGE HERALD OBITUARY, REED AINSCOUGH WAS ALSO ACTIVE WITH THE FORT MACLEOD CHAMBER OF COMMERCE, LIONS’ CLUB, HISTORICAL ASSOCIATION, AND FORT MACLEOD MUSEUM DURING HIS TIME LIVING IN FORT MACLEOD. IN MEDICINE HAT, AISNCOUGH SERVED AS PRESIDENT OF THE HEART AND STROKE ASSOCIATION, AND ACTED AS A SENATOR FOR THE UNIVERSITY OF LETHBRIDGE UPON MOVING TO THE CITY. ON OCTOBER 20, 1993, REED WILSON AINSCOUGH PASSED AWAY IN LETHBRIDGE. AINSCOUGH ELABORATED ON HIS MOTIVES FOR DONATING THE COLLECTION, STATING, “I THINK [THE OBJECTS ARE] A BIG PART OF SOUTH ALBERTA’S HISTORY. DAD WAS VERY ACTIVE IN THE MILITARY AND THE MILITIA FOR MANY YEARS. I THINK THAT’S THE BIGGEST PART [OF WANTING TO DONATE THE OBJECTS]…IT’S DIVESTING, BECAUSE AFTER MY DAD DIED [IN 1992], MY MOTHER STAYED IN THE HOUSE FOR ABOUT 5 YEARS, AND THEN SHE MOVED OUT TO THE COAST. IT WAS AT THAT TIME, WHEN WE WERE GOING THROUGH THE STUFF IN THE HOUSE, THAT WE THOUGHT THIS IS A GOOD TIME TO GET IT DOWN TO SOMEPLACE LIKE THE GALT THAT WOULD LOOK AFTER IT.” FOR MORE INFORMATION INCLUDING FAMILY MILITARY SERVICE FILES, NEWSPAPER CLIPPINGS ON WILLIAM GEORGE AND REED AINSCOUGH, A RESUME FOR REED AINSCOUGH, AND THE FULL INTERVIEW TRANSCRIPTION, PLEASE SEE THE PERMANENT FILE P20160017001-GA.
Catalogue Number
P20160017005
Acquisition Date
2016-06
Collection
Museum
Images
Less detail
Date Range From
1989
Date Range To
1991
Material Type
Artifact
Materials
METAL, INK
Catalogue Number
P20180029006
  1 image  
Material Type
Artifact
Date Range From
1989
Date Range To
1991
Materials
METAL, INK
No. Pieces
1
Diameter
2.6
Description
SILVER PIN WITH SILVER BACKING. FRONT OF BUTTON HAS RED BORDER AROUND WHITE BACKGROUND; BORDER HAS SILVER TEXT “WHO IS THE MINORITY IN CANADA?”; CENTER SHOWS A CARICATURED CAUCASIAN MAN IN THE MIDDLE WITH CARICATURED FIGURES OF A MIDDLE-EASTERN MAN, AN ASIAN MAN, AND AN AFRICAN MAN BEHIND AND TO THE SIDES. BACK OF PIN HAS ENGRAVED CROSS-HATCHING WITH EMBOSSED TEXT AT BOTTOM “TAIWAN”. OVERALL EXCELLENT CONDITION.
Subjects
PERSONAL SYMBOL
Historical Association
COMMEMORATIVE
History
ON DECEMBER 21, 2018, GALT MUSEUM CURATOR AIMEE BENOIT INTERVIEWED KEVIN MACLEAN REAGARDING HIS DONATION OF PERSONAL OBJECTS. ON THE ACQUISITION OF THE PIN, IT WAS NOTED, “MY [MEMORY] IS THAT ON 16TH AVENUE NORTH TO THE EAST OF CENTRE STREET [IN CALGARY], THERE WAS A FLEA MARKET WITH VENDORS. THERE WAS A VENDOR IN THERE THAT WAS SELLING [THE PINS].” “IN THE LATE ‘80S, EARLY 1990S…THERE’S A MEMBER OF THE [NATIONAL] SIKH COMMUNITY WHO WANTS TO WEAR A TURBAN AS A MEMBER OF THE R.C.M.P. THERE’S A LOT OF ANGST BY PEOPLE WHO DON’T UNDERSTAND WHY THIS SHOULD BE THE CASE AND THERE’S A BACKLASH THAT IS HAPPENING. I THINK SOME OF THAT BACKLASH IS COMING OUT OF SOUTHERN ALBERTA AND OUT OF LETHBRIDGE.” “AT THE SAME TIME, IN THE EARLY 1990S…YOU HAVE THE RISE OF THE QUEBEC SEPARATIST MOVEMENT OUT IN EASTERN CANADA. YOU HAVE THIS RISE OF WESTERN VALUE-TYPE STUFF AND PEOPLE FEEL, MAYBE, AS THOUGH THEY’RE BEING CHALLENGED. SO YOU HAVE THE REFORM PARTIES COMING UP. [BECAUSE] I’M A NEWS JUNKIE, I’M ACTIVELY INTERESTED IN THAT. THE FIRST AND ONLY TIME, IN 1992, THAT I ATTENDED A NOMINATION FOR A POLITICAL PARTY…IT WAS A REFORM PARTY [NOMINATION IN 1992]…I REMEMBER BEING AT THE ENMAX. I REMEMBER THE OTHER COMPETING NOMINEES AND I REMEMBER THE POLITICS OF THAT PARTICULAR MEETING. WITH THE UPCOMING ELECTION, A LOT OF MY MOTIVATION [I VOTED REFORM] WAS THAT THERE WAS A GREAT POTENTIAL THAT THE PQ WAS GOING TO FORM THE OFFICIAL OPPOSITION IN CANADA AND I JUST THOUGHT, THERE’S NO WAY THAT CAN HAPPEN.” “[I HAVE BEEN] ASHAMED [OF HAVING IT] BUT I RECOGNIZED THAT IT’S MATERIAL CULTURE. IT HAS POTENTIAL HISTORIC VALUE. THAT’S WHY IT’S BEEN KEPT. IT’S JUST THAT I COULD NOT BRING MYSELF TO SHARE THAT IT WAS IN MY POSSESSION AND THAT I BOUGHT IT.” “IT WOULD BE HARD TO SAY [WHAT THE RESPONSE TO THE PRODUCTION AND SALE OF THE PIN WAS AT THE TIME] BECAUSE OUTSIDE OF MY IMMEDIATE CIRCLE…THAT CIRCLE WOULD BE CERTAINLY IN FAVOUR OF THIS THOUGHT. I DON’T REMEMBER ANY RESPONSE FROM LOCALS…AS AN EXAMPLE, IF THIS [PIN] WAS BEING SOLD TODAY, MAYBE EVEN PRODUCED IN LETHBRIDGE, THERE WOULD BE PROTESTS. DO I REMEMBER ANYTHING LIKE THAT BACK, THEN? NOT AT ALL. IT’S REALLY EASY TO TARGET PEOPLE AND FEEL THIS WAY ABOUT PEOPLE WHEN YOU DON’T HAVE TO INTERACT WITH THEM OR SEE THEM. THEY’RE NOT EVEN ON THE LANDSCAPE SO IT’S REALLY EASY ‘CAUSE AGAIN, IT’S REALLY ABSTRACT, I THINK.” ON HIS DONATION OF THE PIN, MACLEAN ELABORATED, “I’M OBVIOUSLY CONSCIOUS ABOUT CONFORMITY AND, FOR THE MOST PART…[PEOPLE] NOT ONLY WOULD WORK TO LOOK THE SAME…THEY DID [DRESS] THE SAME—SAME RUNNERS, SAME BLUE JEANS, TEE-SHIRT—GENERALLY SPEAKING, THROUGH THE ‘70S AND ‘80S, INTO THE ‘90S. I DON’T THINK THERE WAS A LOT OF DIVERSITY REFLECTED IN SOUTHERN ALBERTA. THAT’S MY OPINION. THERE CERTAINLY WASN’T OUT IN PICTURE BUTTE AND WHEN I’M VISITING LETHBRIDGE, I’M NOT SEEING IT OUTSIDE OF THE TRADITIONAL DIVERSITY WHICH WOULD BE JAPANESE-CANADIANS, WHICH WOULD BE HUTTERITES IN DOWNTOWN LETHBRIDGE, WHICH WOULD BE MEMBERS OF THE CHINESE POPULATION. THE OTHER THING IS THAT BECAUSE THE JAPANESE-CANADIANS ARE REPRESENTED OUT IN PICTURE BUTTE, I’M DATING A MEMBER OF [THE JAPANESE-CANADIAN] COMMUNITY AS WELL BY 1985.” “I STARTED ATTENDING UNIVERSITY IN THE SPRING OF ’92, AND THEN THE PEOPLE WHO I WOULD HAVE BEEN SHARING TIME WITH, I WOULD NOT HAVE BEEN SHARING TIME WITH ANYMORE. I THINK YOUR OUTLOOK BECOMES MUCH BROADER WHEN YOU’RE AT THE UNIVERSITY. THAT’S WHEN THE CHANGE HAPPENED. [THE PIN IS FROM AROUND] 1991 AND I’M IN UNIVERSITY BY 1992. I WOULDN’T SAY THAT THERE WAS THIS LIGHT SWITCH [MOMENT]. THAT WOULDN’T BE THE CASE BUT IT WOULD HAVE HAPPENED RELATIVELY SOON AFTER I STARTED UNIVERSITY.” “I WOULD HOPE THAT [THE PIN] COULD BE USED IN SOME POSITIVE WAY TO CAST THE LIGHT ON CRAPPINESS…I LIKE TO HEAR FROM PEOPLE THAT [COMMUNITY VALUES ARE] CHANGING BUT THEN I KNOW, AT THE SAME TIME, THAT THERE’S A LOT OF PEOPLE THAT HAVEN’T CHANGED. THE DIFFERENCE THOUGH, I THINK, IS THAT WE’RE A MUCH MORE DIVERSE PLACE IN 2018 AND I THINK IT STARTED TWENTY YEARS AGO.” “[THE PIN] SHOULD HAVE BEEN THROWN OUT BUT I THINK I RECOGNIZED IT FOR WHAT IT WAS; THAT POTENTIALLY IT COULD BE USED FOR GOOD NOW, THIRTY YEARS LATER, TO TELL A BROADER STORY ABOUT SOMETHING THAT STILL, TO SOME EXTENT, EXISTS TODAY.” ACCORDING TO ARTICLES FROM THE LETHBRIDGE HERALD, MEDICINE HAT NEWS, AND BRANDON SUN [MANITOBA], IN 1989 RCMP COMMISSIONER NORM INKSTER ANNOUNCED HIS RECOMMENDATIONS FOR CHANGES TO THE RCMP UNIFORM TO ALLOW SIKH MEN TO WEAR CULTURAL, RELIGIOUS TURBANS AND BEARDS. FOLLOWING THE ANNOUNCEMENT, IN 1989, BILL HIPSON OF CALGARY BEGAN PRODUCING PINS WITH THE DESIGN OF A SIKH MAN IN TURBAN AND RCMP UNIFORM, WITH TEXT WRITTEN DIAGONALLY ACROSS THE IMAGE “KEEP THE RCMP CANADIAN”. BY OCTOBER 1989, FACING BACKLASH ACROSS CANADA FOR THE DISCRIMINATORY MESSAGING OF THE PIN, HIPSON AGREED TO END PRODUCTION OF THE PIN AFTER FULFILLING PENDING ORDERS, HOWEVER INDICATED THAT OTHER DESIGNS MIGHT BE RELEASED. IN DECEMBER 1989, PETER KOUDA OF CALGARY BEGAN PRODUCING A PIN WITH THE DESIGN OF A CAUCASIAN MAN SURROUNDED BY THREE INDIVIDUALS OF VISIBLE MINORITIES, WITH TEXT AROUND THE PIN EDGE “WHO IS THE MINORITY IN CANADA?” THE PIN WAS SOLD ACROSS CANADA FOR $5.00. IN THE LATE 1980S AND EARLY 1990S, QUOTES ON STATISTICS FROM NEWSPAPER CLIPPINGS INDICATED THAT VISIBLE MINORITIES COMPRISED 6.3% OF THE CANADIAN POPULACE. IN JANUARY 1990, AFTER FACING NATIONAL CONDEMNATION FROM COMMUNITIES AND POLITICIANS, KOUDA BEGAN SELLING THE PIN INDEPENDENTLY WHEN SELLERS AND SUPPLIERS DROPPED IT FOR ITS DISCRIMINATORY MESSAGING, FOR FEAR OF OFFENDING CUSTOMERS OF VISIBLE MINORITIES. KOUDA CONTINUED TO SELL THE PIN, WITH NATIONAL PROTESTS TO HAVE CHARGES LAID FOR INCITING HATE PROPAGANDA. MANITOBA’S JUSTICE MINISTER, JAMES (JIM) MCCRAE DETERMINED THAT PRODUCTION OF THE PIN COULD NOT BE HALTED WITH CRIMINAL CHARGES, STATING THAT THE PINS COULD NOT BE DEFINED AS PROMOTING HATRED UNDER THE CANADIAN CRIMINAL CODE. CANADIAN CUSTOMS AND REVENUE CANADA ALSO STATED THAT THE PINS WERE NOT CLASSIFIED AS HATE PROPAGANDA UNDER THE CRIMINAL CODE, AND ALLOWED IMPORTATION OF THE PINS INTO CANADA. ON THE PINS, ALBERTA CULTURE MINISTER DOUG MAIN IN 1990 STATED THAT THEY WERE AN ISSUE FOR THE PEOPLE OF ALBERTA, AND NOT NECESSARILY FOR THE GOVERNMENT OF ALBERTA, ACCORDING TO A QUOTE FROM A LETHBRIDGE HERALD ARTICLE. IN FEBRUARY OF 1990, A CALENDAR PRODUCED BY HERMAN BITTNER OF LANGDON, ALBERTA BROUGHT ABOUT SIMILAR CHALLENGES OF HATE PROPAGANDA. BITTNER POSED IN A PHOTOGRAPH FOR THE CALENDAR AS A SIKH MAN IN A TURBAN AND RCMP UNIFORM, WITH THE PHOTOGRAPH CAPTIONED “SGT. KAMELL DUNG” AND THE INSCRIPTION “IS THIS CANADIAN OR DOES THIS MAKE YOU A SIKH?” JUSTICE MINISTER MCCRAE STATED THAT THE POSTER CONSTITUED INCITEMENT TO HATRED, AND THAT HE WOULD CHARGE ANYONE POLICE FOUND SELLING THE CALENDARS. THE 1990 CALENDAR WAS THEN BEING DISTRIBUTED BY TRAVELLING SALESMEN IN BARS ACROSS CANADA. A SECOND POSTER FEATURING DISCRIMINATORY MESSAGING AND IMAGES OF MULTIPLE VISIBLE MINORITIES EMERGED IN 1991. THE POSTER WAS ATTRIBUTED TO THE “ROYAL CANADIAN MULTICULTURAL POLICE”, WITH THE PHOTOGRAPHS COPYRIGHTED TO “HERMAN B.” [BITTNER]. THE WIDESPREAD MEDIA COVERAGE OF THE DISCRIMINATORY PINS AND CALENDARS GARNERED FURTHER SUPPORT FOR PROTESTS AGAINST SIKH MEN WEARING TRADITIONAL TURBANS AND BEARDS IN THE RCMP. THE PINS AND CALENDAR SAW HIGHER SALES AND DEMAND FOR THE PRODUCTS IN SHOPS ACROSS CANADA, AS STATED BY KOUDA AND BITTNER IN ARTICLES FROM 1990. IN 1990, FEDERAL SOLICITOR GENERAL PIERRE CADIEUX APPROVED THE DECISION TO ALLOW SIKH MEN TO WEAR TURBANS AND BEARDS IN THE RCMP. THE DECISION WAS MET WITH A PROTESTING PETITION SIGNED BY OVER 200,000 CANADIANS, ACCORDING TO ARTICLES FROM 1990. FOR MORE INFORMATION INCLUDING ARTICLES FROM THE LETHBRIDGE HERALD, BRANDON SUN, MEDICINE HAT NEWS, AND THE FULL INTERVIEW TRANSCRIPTION, PLEASE SEE THE PERMANENT FILE P20180029001-GA.
Catalogue Number
P20180029006
Acquisition Date
2018-12
Collection
Museum
Images
Less detail
Other Name
ATTIC LADDER
Date Range From
1960
Date Range To
2010
Material Type
Artifact
Materials
METAL, RUBBER
Catalogue Number
P20150010022
  2 images  
Material Type
Artifact
Other Name
ATTIC LADDER
Date Range From
1960
Date Range To
2010
Materials
METAL, RUBBER
No. Pieces
1
Height
314.2
Length
4.9
Width
33.5
Description
ADJUSTABLE LADDER, SIDE RAILS COME TOGETHER TO MAKE THE LADDER MORE COMPACT (LADDER IS ONLY 8.0CM WIDE WHEN THE SIDE RAILS ARE TOGETHER). SILVER COLOURED METAL, WITH ORANGE PAINT, BLACK RUBBER, AND EIGHT RUNGS. ANTI-SLIP SAFETY SHOE ON THE BOTTOM OF BOTH SIDE RAILS. SAFETY SHOE IS BLACK RUBBER ON THE BOTTOM, WITH A PATTERN OF 10 CIRCLES PER SHOE BOTTOM. METAL TEETH ON THE FRONT OF THE SHOE. SHOES ARE ADJUSTABLE, BUT ARE VERY STIFF. BRACE COMES UP FROM THE BOTTOM AND LOCKS TO PREVENT LADDER RAILS FROM COLLAPSING BACK TOGETHER. BOTTOM OF LADDER HAS A 54.5CM SECTION OF BRIGHT ORANGE PAINT AND TOP HAS A 46.0CM SECTION OF BRIGHT ORANGE PAINT. TOP OF ONE RAIL HAS A BLACK RUBBER TOPPER. SMALL BLACK STICKER AT BOTTOM “P1” WITH SEVERAL STICKERS ON THE OPPOSITE RAIL: A ROUGHLY OVAL SHAPED, RED, BLACK, AND SILVER STICKER: “THIS IS A DUO-SAFETY LADDER. DUO-SAFETY LADDER CORP 519 W 9TH AVE. OSHKOSH, WIS.”; THEN A RECTANGULAR RED STICKER WITH WHITE WRITING: “THIS LADDER IS CERTIFIED TO COMPLY WITH N.F.P.A. SPEC 1931-1832; CURRENT EDITION, FOR FIRE DEPARTMENT GROUND LADDERS AND OSHA FIRE LADDER REQUIREMENTS. REFER TO DUO-SAFETY LADDER SAFETY BOOK FOR CARE – USE – MAINTENANCE ON THIS LADDER. DUO-SAFETY LADDER CORP. OSHKOSH, WI 54901”; THEN A WHITE STICKER WITH GOLD WRITING: “10”. THERE IS ALSO A SILVER COLOURED STICKER WITH HANDWRITING ON THIS SAME RAIL, LOCATED BETWEEN THE FIRST AND SECOND RUNGS: “TEST DATE: 25 NOV 2006. LADDER #: ATTIC #18. APPARATUS #: P1. APPARATUS #: P1.” BOTH RAILS HAVE THE FOLLOWING STICKERS, AT ROUGHLY THE MID-POINT OF THE LADDER: RECTANGULAR, WHITE BACKGROUND, BLUE BORDER, BLACK WRITING: “DANGER. FAILURE TO USE, UNDERSTAND, AND FOLLOW PROPER LADDER USAGE INSTRUCTIONS AS MADE AVAILABLE BY DUO-SAFETY LADDER, N.F.P.A., I.S.F.S.I., A.N.S.I., O.S.H.A., ETC. COULD CAUSE SERIOUS INJURY AND/OR DEATH.” RECTANGULAR, WHITE BACKGROUND, BLACK BORDER AND WRITING: “DANGER. WATCH FOR WIRES. THIS LADDER CONDUCTS ELECTRICITY.” RECTANGULAR, YELLOW, WITH BLACK WRITING: CAUTION. SET UP LADDER PROPERLY TO REDUCE SLIP AND OVERHEAD HAZARDS. FOLLOW THESE INSTRUCTIONS. 1. PLACE TOES AGAINST BOTTOM OF LADDER SIDE RAILS. 2. STAND ERECT. 3. EXTEND ARMS STRAIGHT OUT. 4. PALMS OF HANDS SHOULD TOUCH TOP OF RUNG AT SHOULDER LEVEL. OUT -->” STICKER ON THE INSIDE OF FOURTH RUNG FROM THE BOTTOM: WHITE BACKGROUND, BLACK WRITING: “REMOVE LADDER FROM SERVICE AND TEST IF ANY HEAT SENSOR TURNS DARK -->” LADDER IS IN GOOD OVERALL CONDITION. ADJUSTABLE FEET ARE VERY STIFF. LOTS OF SCUFF MARKS ALL OVER LADDER AND SOME STICKERS HAVE BEEN PARTIALLY REMOVED/SCRATCHED.
Subjects
REGULATIVE & PROTECTIVE T&E
Historical Association
SAFETY SERVICES
History
THIS ATTIC LADDER WAS USED BY THE LETHBRIDGE FIRE DEPARTMENT. IN A WRITTEN STATEMENT PROVIDED AT THE TIME OF DONATION, JESSE KURTZ, DEPUTY CHIEF – SUPPORT SERVICES (RETIRED), EXPLAINED THAT THE LADDER WAS “USED TO ACCESS ATTIC SPACES THROUGH SMALL ACCESS HOLES IN CEILINGS. USED WHEN WE DID NOT WANT TO PULL A CEILING DOWN AFTER A FIRE TO ENSURE THAT THE FIRE IN THE ATTIC WAS OUT.” HE CONTINUED SAYING THAT THIS LADDER WAS DECOMMISSIONED BECAUSE IT IS “OLD AND WORN OUT. ALL LADDERS MUST MEET MINIMUM ACCEPTANCE STANDARDS.” IN THE SUMMER OF 2015, COLLECTIONS TECHNICIAN KEVIN MACLEAN, CONDUCTED A SERIES OF INTERVIEWS WITH CURRENT AND FORMER MEMBERS OF THE FIRE DEPARTMENT, INCLUDING: CLIFF “CHARLIE” BROWN (HIRED IN 1966, RETIRED 2004), TREVOR LAZENBY (HIRED IN 1994), AND LAWRENCE DZUREN (HIRED 1959, RETIRED 1992). BROWN EXPLAINED THAT THIS IS “WHAT WE CALL A LITTLE ATTIC LADDER, TO GET BACK INTO A TIGHT PLACE WHERE YOU COULDN’T BRING A BIG LADDER IN … YOU COULD GET IT UP INTO THE ATTIC SO YOU COULD CHECK WHAT WAS IN THE ATTIC.” LAZENBY ELABORATED: “THIS IS A FOLDING ATTIC LADDER … THE RUNGS THAT SEPARATE THE TWO BEAM SECTIONS ARE ACTUALLY HINGED IN NATURE AND SO IT FOLDS UP AND FITS IN, TYPICALLY, A LITTLE COMPARTMENT ON THE BACK END OF THE TRUCK BECAUSE [THEY] HAVE SOME LONG, LATERAL STORAGE THERE. THESE SURPRISINGLY GET USED A FAIR AMOUNT, STILL.” HE CONTINUED SAYING “THEY’RE NARROW ENOUGH THAT THEY’RE ALMOST DIFFICULT TO CLIMB WITH YOUR BIG FIRE BOOTS ON.” LAZENBY EXPLAINED THAT THE LADDERS IN USE PRESENTLY ARE VERY SIMILAR TO THIS MODEL: “YOU CAN TELL BY LOOKING AT IT IT’S AN OLDER PIECE BUT THE CONSTRUCTION IS ESSENTIALLY THE SAME. THEY MIGHT BE USING SLIGHTLY LIGHTER MATERIALS NOW, BUT FROM WHAT I CAN SEE, THEY’RE BASICALLY THE SAME.” HE ADDED THAT HE WAS OFTEN THE ONE USING THE LADDER: “BECAUSE I WAS NEVER ONE OF THE BIGGER GUYS ON THE JOB, AND ESPECIALLY WHEN I STARTED I WAS PROBABLY TWENTY POUNDS LIGHTER THAN I AM NOW, IF THEY NEEDED SOMEONE TO GET INTO A SMALLER SPACE, I WAS THAT GUY, TYPICALLY, BECAUSE WHEN YOU WEIGHT 250 [POUNDS] AND YOU THROW THE SCBA ON AND ALL THE EQUIPMENT, IT’S DEFINITELY TOUGH FOR SOME OF THOSE GUYS TO GET THROUGH THAT ACCESS. SO, YES, I’VE BEEN IN MY FAIR SHARE OF ATTICS AND THAT’S THE ONLY MEANS TO GET UP THERE.” LAZENBY EXPLAINED THE IMPORTANCE OF USING THE LADDER: “ANY TIME A FIRE VENTS OUT OF A WINDOW AND TOUCHES ANY PART OF THE SOFFIT, IT’S INCUMBENT THAT YOU HAVE TO ABSOLUTELY CHECK THAT BECAUSE IF YOU DON’T AND YOU’RE OPERATING UNDERNEATH AN ATTIC FIRE, THAT’S A VERY, VERY UNSAFE PLACE TO BE.” DZUREN ADDED: “THAT’S A COLLAPSIBLE LADDER. IT’S KIND OF LIKE A SCISSOR TYPE OF LADDER. IT WAS VERY COMPACT, YOU COULD STORE IT ON ONE OF YOUR VEHICLES WITHOUT IT TAKING UP TOO MUCH ROOM … YOU’D CARRY THAT INTO YOUR HOUSE IF AN OFFICER WANTED YOU TO GO UP INTO AN ATTIC … IT WAS EASY TO TRANSPORT AND ONCE YOU GOT IT INTO THE OPENING YOU COULD JUST GIVE IT A SWITCH AND IT WOULD OPEN UP AND YOU COULD JUST CLIMB RIGHT UP TO THE SPOT THERE.” SEE PERMANENT FILE FOR FULL INTERVIEW TRANSCRIPTS AND ADDITIONAL INFORMATION ABOUT THE LETHBRIDGE FIRE DEPARTMENT.
Catalogue Number
P20150010022
Acquisition Date
2015-02
Collection
Museum
Images
Less detail
Other Name
PIERCING NOZZLE
Date Range From
1970
Date Range To
1990
Material Type
Artifact
Materials
BRASS, RUBBER, STEEL
Catalogue Number
P20150010006
  2 images  
Material Type
Artifact
Other Name
PIERCING NOZZLE
Date Range From
1970
Date Range To
1990
Materials
BRASS, RUBBER, STEEL
No. Pieces
1
Length
151.1
Width
10.2
Diameter
6.3
Description
PIERCING NOZZLE. BRASS, WITH CHROME PLATE, STEEL, AND BLACK RUBBER. CYLINDRICAL END OF NOZZLE HEAD IS THREADED, TO ALLOW A HOSE TO BE CONNECTED. TEXTURED EDGE NEAR THREADING. THROUGH THIS OPENING A BLACK RUBBER RING AND METAL MESH ARE VISIBLE. ADJUSTABLE HANDLE EMBOSSED ON ONE SIDE WITH “AKRON BRASS” AND “1 1/2 4 WAP” ON THE OTHER. (NOTE: WAP IS A BEST GUESS, LETTERS HAVE LOST THEIR DEFINITION.) BELOW HANDLE, STAMPED INTO THE METAL BODY OF THE NOZZLE IS “SHUT FOG OPEN”. HANDLE MARKS CHANGE IN SHAPE FROM CYLINDRICAL TO TRIANGULAR. TRIANGULAR PORTION HAS A BLACK STICKER “Q2” AND A STRIPE OF YELLOW PAINT, NEAR THE CONNECTION WITH THE PIPE. A SMALL RECTANGULAR PUSH BUTTON ALLOWS THE NOZZLE TO BE DISCONNECTED FROM THE PIPE. SMALL HOLE THROUGH THE NOZZLE HEAD VISIBLE AT THE CONNECTION OF THE PIPE AND HEAD, WHICH OPENS AND CLOSES WITH THE OPENING AND CLOSING OF THE HANDLE. NEAR THE CONNECTION OF THE PIPE AND HEAD STAMPED INTO THE METAL OF THE PIPE “LFD 62”, WITH THE STAMP BEING PARTIALLY FILLED IN WITH WHITE PAINT. TWO SECTIONS OF STEEL PIPING HAVE BEEN PERMANENTLY THREADED TOGETHER. END OF PIPE HAS THREE SETS OF TWELVE HOLES EACH AROUND THE PIPE, 13.5CM FROM THE END. TIP OF PIPE IS ANGLED, TO CREATE A SHARP END TO PENETRATE THROUGH WALLS. OVERALL GOOD CONDITION. WELL-WORN. CHROME PLATING HAS WORN AWAY, ESPECIALLY ON THE EDGES OF THE HANDLE. LOTS OF SCRATCHES AND SCUFF MARKS ALL OVER. VARIOUS BLACK STAINS ON THE PIPE SECTION.
Subjects
REGULATIVE & PROTECTIVE T&E
Historical Association
SAFETY SERVICES
History
THIS PIERCING NOZZLE WAS USED BY THE LETHBRIDGE FIRE DEPARTMENT. IN A WRITTEN STATEMENT PROVIDED AT THE TIME OF DONATION, JESSE KURTZ, DEPUTY CHIEF – SUPPORT SERVICES (RETIRED), EXPLAINED THAT THIS NOZZLE WAS “USED TO PUT WATER ON THE OTHER SIDE OF A WALL, FLOOR, OR CEILING. ALSO USED TO PUT WATER INSIDE OF A HAYSTACK.” IN THE SUMMER OF 2015, COLLECTIONS TECHNICIAN KEVIN MACLEAN, CONDUCTED A SERIES OF INTERVIEWS WITH CURRENT AND FORMER MEMBERS OF THE FIRE DEPARTMENT, INCLUDING: CLIFF “CHARLIE” BROWN (HIRED IN 1966, RETIRED 2004) AND TREVOR LAZENBY (HIRED IN 1994). BROWN EXPLAINED SAYING: “IT HAS A METAL PROBE ON ONE END OF IT WITH LITTLE HOLES DRILLED INTO IT. MOSTLY WE USED IT FOR BALE FIRES, JAMMING IT INTO THE HAYSTACK OR BALE … ONCE IN A WHILE, WE’D USE IT FOR INSIDE A WALL, BUT VERY SELDOM.” LAZENBY ADDED: “THIS PIECE OF EQUIPMENT … HAS A NUMBER OF NAMES … IT’S BEEN CALLED ANYTHING FROM A CELLAR NOZZLE … TO AN ATTIC NOZZLE, TO A PIERCING NOZZLE … THE POINT ON THE END OF THIS WAS ACTUALLY QUITE SHARP, AND IF YOU WANTED TO, IF YOU HAD AN ATTIC FIRE, YOU COULD EASILY POKE THIS FROM BELOW UP THROUGH YOUR DRYWALL AND YOUR INSULATION … AND THERE WERE A BUNCH OF SMALL HOLES DRILLED INTO THE VERY END SO THAT WHEN YOU DID OPEN IT, THE WATER WOULD COME OUT IN A FOG PATTERN.” HE CONTINUED, SAYING: “THE ADVANTAGE OF THAT IS THAT YOU DIDN’T NECESSARILY HAVE TO PULL THE CEILING DOWN … YOU COULD DO SOME SUPPRESSION UP THERE BEFORE YOU DECIDED TO PULL THAT CEILING DOWN AND SORT OF MAKE CONDITIONS BETTER BEFORE YOU EXPOSED YOURSELF TO THEM. SO FOR THE ATTIC USE, IT WORKED REALLY, REALLY WELL FROM WHAT I HEARD. I’VE NEVER DEPLOYED ONE OF THESE IN THAT SITUATION.” LAZENBY EXPLAINED FURTHER: “THE OTHER USE … IF YOU GOT TO A STRUCTURE AND THE BASEMENT WAS ON FIRE, SAME IDEA, JUST DIFFERENT DIRECTION … IF YOU SHOVED THE NOZZLE DOWN AND OPENED IT UP, YOU’RE GETTING AUTOMATIC SUPPRESSION BEFORE YOU SENT A TEAM DOWN THERE INTO THAT ATMOSPHERE. I WAS EVEN TOLD THAT YOU COULD USE THESE ON AN ENGINE FIRE … SOME OF THESE WERE BUILT WITH A STRIKING SECTION ON THEM SO THAT IF YOU HAD A HAMMER YOU COULD HIT THE TOP OF IT – THIS WOULD ACTUALLY PIERCE THE HOOD OF THE VEHICLE, ENTER THE ENGINE COMPARTMENT, YOU COULD TURN THE NOZZLE ON, AND IT WOULD SUPPRESS THE FIRE WITHOUT EVER HAVING TO LIFE THE HOOD. … I DON’T THINK THAT WE EVER USED THIS TOOL MAYBE AS OFTEN AS WE SHOULD HAVE. I THINK THAT WE, AT TIMES, COULD HAVE MADE BETTER USE AND ACTUALLY MADE CONDITIONS A LITTLE BIT BETTER FOR OURSELVES BEFORE WE PUT OURSELVES INTO THAT SPACE OR ATMOSPHERE.” WHEN ASKED IF THIS TYPE OF NOZZLE IS STILL IN USE, LAZENBY REPLIED: “WE HAVE ONE OF THESE ON OUR ENGINE DOWNTOWN … OURS BREAKS DOWN INTO A COUPLE OF PIECES SO IT STORES EASIER … BUT FUNDAMENTALLY IT’S THE SAME TOOL, SLIGHT MODIFICATIONS FOR EASE OF USE, BUT YEAH, THEY’RE STILL AROUND.” SEE PERMANENT FILE FOR FULL INTERVIEW TRANSCRIPTS AND ADDITIONAL INFORMATION ABOUT THE LETHBRIDGE FIRE DEPARTMENT.
Catalogue Number
P20150010006
Acquisition Date
2015-02
Collection
Museum
Images
Less detail
Other Name
HIGH VOLUME FIRE HOSE / PUMP LENGTH HOSE
Date Range From
1965
Date Range To
1985
Material Type
Artifact
Materials
NYLON, BRASS, RUBBER,
Catalogue Number
P20150010021
  2 images  
Material Type
Artifact
Other Name
HIGH VOLUME FIRE HOSE / PUMP LENGTH HOSE
Date Range From
1965
Date Range To
1985
Materials
NYLON, BRASS, RUBBER,
No. Pieces
1
Length
416.0
Width
38.3
Diameter
17.5
Description
SHORT HIGH VOLUME FIRE HOSE, ALSO KNOW AS PONY LENGTH OR PUMP LENGTH FIRE HOSE. SHORT, WIDE, RED FIRE HOSE. COUPLINGS ON EACH END OF HOSE. ON THE LARGER END (17.5CM DIAMETER) THE CHROME PLATED COUPLING HAS 10.4CM LONG HANDLES AND A STRIPE OF GREEN PAINT NEAR THE CONNECTION WITH THE HOSE. THE HOSE HAS BEEN TRIPLE CLAMPED ONTO THE COUPLING. ON THE OTHER END OF THE HOSE, THE DIAMETER IS 14.0CM, AND THE COUPLING HAS HANDLES THAT ARE 4.7CM LONG. THIS END OF THE HOSE IS ALSO TRIPLE CLAMPED ONTO THE COUPLING. ON EACH END OF THE HOSE, TWO OF THE CLAMPS ARE SMALLER AND ARE STAMPED WITH A REPEATING "* DENVER * COLORADO * USA * BAND * IT *" THE LARGEST CLAMPS, EACH FURTHEST FROM ITS RESPECTIVE COUPLING, STAMPED: "DIXON V. & C. CO. USA 525" ON EITHER SIDE OF THE TWO LARGE BOLT SETS. VERY GOOD OVERALL CONDITION. CHROME PLATING HAS WORN AWAY ON EDGES. LOTS OF SCRATCHES AND GOUGES IN THE METAL HANDLES OF THE COUPLINGS.
Subjects
REGULATIVE & PROTECTIVE T&E
Historical Association
SAFETY SERVICES
History
THIS HIGH VOLUME FIRE HOSE WAS USED BY THE LETHBRIDGE FIRE DEPARTMENT. IN A WRITTEN STATEMENT PROVIDED AT THE TIME OF DONATION, JESSE KURTZ, DEPUTY CHIEF – SUPPORT SERVICES (RETIRED), EXPLAINED THAT THIS HOSE WAS USED “WHEN A FIRE ENGINE NEEDED TO CONNECT TO A FIRE HYDRANT AND WAS PARKED RIGHT BESIDE THE HYDRANT. THIS WAS BEFORE WE CARRIED LARGER BUT LIGHTER HOSES ON THE TRUCKS.” IN THE SUMMER OF 2015, COLLECTIONS TECHNICIAN KEVIN MACLEAN, CONDUCTED A SERIES OF INTERVIEWS WITH CURRENT AND FORMER MEMBERS OF THE FIRE DEPARTMENT, INCLUDING: CLIFF “CHARLIE” BROWN (HIRED IN 1966, RETIRED 2004), TREVOR LAZENBY (HIRED IN 1994), AND LAWRENCE DZUREN (HIRED 1959, RETIRED 1992). BROWN EXPLAINED THAT “THIS WAS ONE OF YOUR MAIN PIECES OF EQUIPMENT WHEN YOU WENT TO A FIRE … WE’D HOOK THIS [THE HOSE] TO THE HYDRANT, AND THEN THIS INTO OUR PUMP, SO WE’D BE GETTING 8 INCHES OF WATER INTO OUR PUMP, AND THEN THE PUMP WOULD BOOST THAT LINE, AND WE COULD PUT UP 5 OR 6 LINES … THIS WAS ONLY USED AT LARGE FIRES … WHEN WE HAD TO USE THIS, THERE WAS BIG TROUBLE.” LAZENBY ADDED: “IF THIS WAS IN SERVICE WITH OUR DEPARTMENT, THIS WAS IN SERVICE BEFORE I GOT ON, SO I DON’T KNOW THAT I’VE EVEN EVER ACTUALLY SEEN ONE OF THESE, TO BE HONEST WITH YOU.” DZUREN ELABORATED: “THAT’S WHAT WE WOULD HOOK UP ONTO FROM OUR HYDRANT TO THE PUMP. THE HYDRANT MAN, HE WOULD CONNECT THAT TO THE HYDRANT GATE, TO THE HYDRANT, AND THIS WOULD GO TO THE INPUT SIDE OF THE PUMPER. AND THEN THEY WOULD TURN ON THE WATER WITH THAT NOZZLE AND THEY WOULD SUPPLY WATER TO THE FIRE TRUCK AND HE COULD PUMP IT TO A MULTITUDE OF LINES THAT COME OFF OF THERE.” WHEN ASKED WHY FIREFIGHTERS WOULD WANT TO RUN THE WATER THROUGH THE PUMPER TRUCK, RATHER THAN JUST OFF THE HYDRANT, DZUREN EXPLAINED: “WELL, IF THE HYDRANT PRESSURE IS NOT HIGH ENOUGH TO ACCOMMODATE FIREFIGHTING, LIKE SAY IF OUR HOSE, IF A NOZZLE LIKE THAT, YOU’VE GOT TO HAVE UP TO A HUNDRED POUNDS IN THERE, A HYDRANT NORMALLY DOESN’T HAVE THAT KIND OF HIGH PRESSURE.” SEE PERMANENT FILE FOR FULL INTERVIEW TRANSCRIPTS AND ADDITIONAL INFORMATION ABOUT THE LETHBRIDGE FIRE DEPARTMENT.
Catalogue Number
P20150010021
Acquisition Date
2015-02
Collection
Museum
Images
Less detail
Other Name
PIKE HOOK
Date Range From
1970
Date Range To
1990
Material Type
Artifact
Materials
METAL, WOOD
Catalogue Number
P20150010008
  1 image  
Material Type
Artifact
Other Name
PIKE HOOK
Date Range From
1970
Date Range To
1990
Materials
METAL, WOOD
No. Pieces
1
Length
323
Width
11.5
Diameter
4.2
Description
PIKE POLE. LONG, CYLINDRICAL WOODEN HANDLE, WITH A METAL HEAD. THE HEAD IS IN THE SHAPE OF A LOWER CASE 'R', WITH A STRAIGHT AND HOOKED POKER. TWO METAL RIVETS HOLD THE METAL HEAD ON THE WOODEN POLE. NO MARKINGS. FAIR TO GOOD CONDITION. METAL HAS RUSTED. WOOD IS WELL USED AND HAS SEVERAL GOUGES/SLIVERS MISSING. WOOD IS VERY DARK FROM USE. WOOD ESPECIALLY DARK AT JUNCTION WITH METAL HEAD.
Subjects
REGULATIVE & PROTECTIVE T&E
Historical Association
SAFETY SERVICES
History
THIS PIKE POLE WAS USED BY THE LETHBRIDGE FIRE DEPARTMENT. IN A WRITTEN STATEMENT PROVIDED AT THE TIME OF DONATION, JESSE KURTZ, DEPUTY CHIEF – SUPPORT SERVICES (RETIRED), EXPLAINED THAT IT WAS “USED TO PULL CEILINGS FROM BELOW DURING OVERHAUL. ALSO USED TO FORCE CEILINGS DOWN DURING VENTILATION. THE SAME TYPE OF TOOL IS IN USE TODAY.” IN THE SUMMER OF 2015, COLLECTIONS TECHNICIAN KEVIN MACLEAN, CONDUCTED A SERIES OF INTERVIEWS WITH CURRENT AND FORMER MEMBERS OF THE FIRE DEPARTMENT, INCLUDING: CLIFF “CHARLIE” BROWN (HIRED IN 1966, RETIRED 2004) AND TREVOR LAZENBY (HIRED IN 1994). BROWN EXPLAINED “THAT WAS PRETTY IMPORTANT … WHEN YOU HAD A FIRE, AND THE FIRE WAS STILL GOING, BUT MOST OF IT WAS OUT, THE CEILINGS – IF YOU DIDN’T KNOW IF THE FIRE WAS OUT IN THE CEILING, YOU’D TAKE THE PIKE POLE, AND YOU CAN SEE HOW YOU WOULD POKE IT IN … THAT WAS A VERY DESTRUCTIVE TOOL, YOU COULD DO A LOT OF DAMAGE WITH THAT. BUT IF THERE WAS SOMETHING THAT YOU HAD TO GET INTO THE CEILING TO CHECK, AND WE’D OPEN A HOLE IN THE CEILING TO GET UP ON THE LADDER TO LOOK … POKING AROUND TO MAKE SURE THE FIRE WAS OUT.” LAZENBY ADDED: “THIS IS PROBABLY AS CLASSIC A TOOL, A HAND TOOL, AS MAYBE THE PICK HEADED AXE … AS FAR AS FIREFIGHTING GOES. THIS IS A GREAT SALVAGE AND OVERHAUL TOOL … IF YOU HAD A FIRE GO UP INSIDE THE WALLS AND YOU THOUGHT MAYBE THERE WAS FIRE IN THE ATTIC, YOU WOULD NEED TO PULL DOWN THE PLASTER BOARD OR THE LATH OR THE DRYWALL TO … DO A VISUAL INSPECTION OF THAT SPACE.” HE CONTINUED, EXPLAINING ITS USE: “THE POINTY END WAS PERFECT FOR BREAKING THROUGH THE DRYWALL AND ONCE YOU MADE THAT INCISION, FOR LACK OF A BETTER TERM, IF YOU TURNED IT NINETY DEGREES, NOW ALL OF A SUDDEN, THE HOOK IS POINTING TOWARDS A FRESH PORTION OF THE DRYWALL AND AS YOU PULLED, IT WOULD COME DOWN IN RELATIVELY LARGE CHUNKS. AND YOU CAN OPEN UP A FAIR AMOUNT OF CEILING IN A SHORT TIME WITH THIS.” LAZENBY DESCRIBED THE DIFFERENCE BETWEEN THIS PIKE POLE AND MORE MODERN VERSIONS: “THE CONNECTION POINT BETWEEN THE METAL HEAD AND WOODEN HANDLE WOULD WEAKEN AND SOMETIMES THE HEADS WOULD ROCK A LITTLE BIT; THEY WERE TOUGH TO KEEP TIGHT, THEY WOULD RUST A LITTLE BIT. THEY’RE BEING MADE OUT OF DIFFERENT MATERIALS NOW, MOST NOTABLY, THE HANDLES HAVE GONE TO FIBERGLASS. THEY DON’T CONDUCT ELECTRICITY WELL, WHICH IS GOOD. NEITHER DID THE WOOD, BUT AGAIN, NO SPLINTERS, NO SLIVERS, THAT KIND OF THING.” HE REITERATED THE IMPORTANCE OF THIS TOOL: “IT’S ANOTHER GO-TO TOOL FOR US: AXE, HALLIGAN, AND I WOULD SAY PIKE POLE ARE PROBABLY THE THREE MOST COMMONLY USED HAND TOOLS … AND ACTUALLY, IF YOU LOOK, MOST FIRE SERVICE BADGES THAT PEOPLE WEAR – YOU’VE GOT A PIKE POLE AND LADDER – THEY’RE SYNONYMOUS WITH THE FIRE SERVICE.” SEE PERMANENT FILE FOR FULL INTERVIEW TRANSCRIPTS AND ADDITIONAL INFORMATION ABOUT THE LETHBRIDGE FIRE DEPARTMENT.
Catalogue Number
P20150010008
Acquisition Date
2015-02
Collection
Museum
Images
Less detail

7 records – page 1 of 1.