Skip header and navigation

2 records – page 1 of 1.

Date Range From
1980
Date Range To
1990
Material Type
Artifact
Materials
PLASTIC, STEEL, GLASS
Catalogue Number
P20180005000
  2 images  
Material Type
Artifact
Date Range From
1980
Date Range To
1990
Materials
PLASTIC, STEEL, GLASS
No. Pieces
1
Height
30.5
Length
57
Width
11.3
Description
CAMCORDER COMPRISED OF LENS, BETACAM DECK, AND COLOR CAMERA. BETACAM DECK AT BACK OF CAMERA IS TWO-TONE GREY WITH TWO PLUG-INS FOR “AUDIO IN, CH-1, CH-2” AND ONE PLUG-IN FOR “DC-IN, 12V”. BETACAM DECK HAS TWO BLACK SLIDE BUTTONS ON TOP LABELLED IN WHITE “EJECT” AND “REW”. BETACAM DECK HAS GREY METAL HANDLE AT TOP THAT FASTENS TO BETA CASSETTE DECK. BETACAM DECK HAS YELLOWED PLASTIC WINDOW ON SIDE TO VIEW INSIDE MECHANISMS; BELOW WINDOW IS GREEN, RED AND BLUE DECAL READING “45 NEWS, 45”. REVERSE SIDE HAS SILVER “POWER ON/OF” SWITCH ABOVE METER MEASURING BATTERY CHARGE, “SONY VU”; BETACAM DECK HAS TWO ROUND BLACK BUTTONS LABELLED “RESET” AND “LIGHT” ABOVE BLACK SWITCH LABELLED “TAPE TIMER, TIME CODE”; SIDE HAS DIGITAL DISPLAY SCREEN READING “HOUR, MIN, SEC”. SIDE HAS ROW OF SIX RED LIGHTS NEAR BOTTOM LABELLED WITH WORN WHITE PAINT WITH FIRST TWO ILLEGIBLE, “HUMID, SLACK, TAPE END, BATTERY”. SIDE HAS PANEL THAT OPENS AT BOTTOM EDGE WITH SIX DARK GREY BUTTONS LABELLED IN PAIRS “HOUR, MINUTE, SECOND” AND TWO BLACK SWITCHES LABELLED “U-BIT, TIME” AND “REC RUN, FREE RUN”. SIDE HAS SILVER PLATE FIXED READING “SONY”. BACK OF BETACAM DECK HAS SILVER LABEL WITH RED, GREEN AND BLUE LOGO “45 CFCN TELEVISION”; BACK HAS BLACK LABEL WITH SILVER TEXT “SONY BETACAM, MODEL BVV-1, VIDEOCASSETTE BETACAM DECK, DCIN, 12V, 10W, NO. 11085, SONY CORPORATION, MADE IN JAPAN, 3-676-119-01”. TOP OF BETACAM DECK HAS BLACK LABEL WITH SILVER TEXT “SAVE MODE ONLY”. COLOR CAMERA IN MID-SECTION IS LIGHT GREY WITH SMALL PIECE OF SILVER TAPE FIXED TO TOP. SIDE OF CAMERA HAS YELLOW LABEL WITH BLACK “1”; SIDE HAS DARK GREY CONTROL PANEL AT BOTTON EDGE WITH EMBOSSED TEXT AND SILVER SWITCHES AND BUTTONS, “AUTO WHITE BAL, CAMERA, PRE HEAT/ON, VTR, SAVE/STOP, GAIN, 12/6/0, OUTPUT, BASS/CAM, WHITE BAL, PRE SET/AUTO”. SIDE HAS DARK GREY BUTTON ABOVE CONTROL PANEL LABELLED “VTR START”. SIDE HAS SILVER FITTING BESIDE PANEL LABELLED “PEDESTAL”. SIDE HAS SILVER LABEL WITH WORN BLACK TEXT “SONY MODEL NO. BVP-1, COLOR VIDEO CAMERA, DC, 12V, 11W, NO. 10505”. SIDE HAS SILVER LABEL WITH BLACK TEXT “FILTER, 1 3200’K, 2 5200’K + 1/4ND, 3 5200’K, 4 6800’K”. REVERSE SIDE HAS BLACK PLATE FIXED WITH SILVER TEXT “SONY” ABOVE BLACK LABEL WITH RED, GREEN, BLUE AND WHITE LOGO “TRINICON”. SIDE HAS SILVER FITTING AT LOWER EDGE WITH EMBOSSED LABEL “MONITOR OUT”; LOWER EDGE HAS SILVER KEY HOLE WITH EMBOSSED LABEL “BATTERY”. CAMERA HAS ATTACHED BLACK ABOVE-VIEWFINDER WITH RUBBER GUARD OVER GLASS LENS. VIEWFINDER IS FIXED TO FRONT OF CAMERA; VIEWFINDER HAS WHITE TAPE ATTACHED TO TOP WITH BLUE HANDWRITTEN TEXT “PASS JULZ DAMAGE TO TUBE OR MULT.PLER”. BACK OF VIEWFINDER HAS SILVER SWITCH “TALLY, ON/OF” AND TWO BLACK METAL TURN-KNOBS “BRIGHT, CONTR”. FRONT OF VIEWFINDER HAS BLACK PLATE ATTACHED WITH SILVER TEXT “SONY”. BLACK LENS AT FRONT FIXED IN LENS STAND WITH LEATHER STRAP ON SIDE AND BLACK PLASTIC BUTTONS “VTR, RET, IRIS M”; SIDE OF LENS STAND HAS BLACK SWITCHES “W/T” AND “IRIS, A/M”. LENS HAS WHITE LABEL AROUND MID-SECTION “CANON MACRO TV ZOOMJ13X9C, 9-117MM, 1.1.6, NO.80581, CANON, JAPAN”. LENS ROTATES TO ADJUST FOCUS AND DEPTH. BETACAM HAS WEAR ON LABELS AND DISCOLORATION ON PLASTIC WINDOW; COLOR CAMERA HAS WEAR ON LABELS AND ADHESIVE RESIDUE ON SIDE; HANDLE ON TOP HAS WORN AND CHIPPED PAINT; VIEWFINDER IS WORN; OVERALL VERY GOOD CONDITION.
Subjects
TELECOMMUNICATION T&E
Historical Association
PROFESSIONS
BUSINESS
History
ON MARCH 22, 2018, COLLECTIONS TECHNICIAN KEVIN MACLEAN INTERVIEWED DARREN KRONLUND REGARDING HIS DONATION OF A SONY BVV-1 BETACAM AND CAMCORDER. THE CAMCORDER WAS USED IN THE 1980S BY THE CTV LETHBRIDGE FILM CREW. ON THE FUNCTION OF THE CAMERA IN THE CTV STUDIO, KRONLUND ELABORATED, “THE TECHNOLOGY WITH CAMERAS PROGRESSED QUICKER THAN THE DECKS DID. THESE CAMERAS AND DECKS ARE USED FOR ELECTRONIC FIELD PRODUCTION [AND ARE] CALLED THE EFP CAMERAS. THE DECKS KIND [ARE] THAT TECHNOLOGY WHICH THE MAJORITY OF STATIONS USED FOR THE LONGEST TIME [IN] SONY BETA CAM FORMAT. THAT’S WHAT THE DECK IS, BUT THE CAMERAS THEMSELVES HAD AT ONE TIME THREE TUBES FOR COLOUR CAMERAS. THEN TECHNOLOGY CAME WHERE THEY COULD DO IT WITH JUST SENSORS…SO YOU DIDN’T HAVE TUBES. IT WAS MORE SENSITIVE TO LIGHT AND THAT WAS AN IMPROVEMENT. YOU DIDN’T HAVE TO HAVE TO BRING A BUNCH OF LIGHTS ALONG WITH YOUR SHOOTS. AS THOSE CAMERAS CAME OUT, THEY JUST DID SUCH A BETTER JOB, THAT THESE CAMERAS WERE NO LONGER USED. ALTHOUGH THEY WORKED, THEY WOULD JUST GET STORED AND NEWER TECHNOLOGY, BETTER PICTURES AND LIGHTER [WOULD BE USED].” “[THIS CAMERA] IS A COMPOSITE. AS TECHNOLOGY EVOLVED, THEY COULD SUPPLY [THE] UPPER HALF, THE CAMERA HALF, [AND] YOU COULD CONTINUE TO USE THE OLDER DECK.” TO ME [THE DECK AND CAMERA] ARE DIFFERENT [AGES]. I THINK THE DECK IS NEWER THAN THE CAMERA. OTHERWISE THEY’D BE THE SAME COLOUR. I CAN’T REMEMBER THE OLD, ORIGINAL DECK BUT YOU COULD SWAP OUT DECKS BECAUSE THEY DID MAKE IMPROVEMENTS WITH DECKS AS WELL. THERE WAS A TIME THEY USED METAL TAPES WHICH WAS FOR AUDIO. IT HELPED, YOU COULD GET BETTER AUDIO QUALITY. THEY CALLED THEM METAL, IT’S JUST METAL PARTICLES IN THE TAPE.” “I WOULD SAY THIS CAMERA PROBABLY GOT USED, I’M GOING TO GUESS ’84…IT MIGHT HAVE BEEN IN SERVICE WHEN I GOT HERE…I PROBABLY SERVICED THE] CAMERA AND/OR DECK…[BY 1990 IT WAS] PROBABLY REPLACED WITH THE NEWEST TECHNOLOGY. NOT THE NEWEST TECHNOLOGY BUT NEWEST TO US, CALGARY WOULD HAVE HAD THE NEWEST TECHNOLOGY.” “BETA WAS THE STAPLE FORMAT FOR VIDEO FOR MANY YEARS. PROBABLY LEADING RIGHT UP TO INTO THE DIGITAL WORLD IT WAS THE KING. PANASONIC HAD A FORMAT [TOO]…HITACHI HAD THEIR OWN TOO, BUT THEY EVEN MADE THEIR CAMERAS COMPATIBLE WITH BETA DECKS THAT’S HOW BIG INFLUENCE [WAS]. SOME SMALLER, INDEPENDENT STATIONS MAYBE WENT WITH SOME OF THAT STUFF, BUT I’D SAY 90% OF THE INDUSTRY WAS BETA.” “IT WAS [FOR] REPORTERS. IT WAS FOR NEWS AND VIDEO PRODUCTION.” KRONLUND ELABORATED ON THE CAMERA’S HISTORY IN PRODUCTION, NOTING, “IT’S BEEN IN THE BASEMENT FOR PROBABLY [TEN YEARS]…I FOUND IT IN AN OLD SHIPPING CONTAINER. THERE’S BEEN NUMEROUS UPGRADES TO CAMERAS SINCE THEN, SO NOTHING WAS DONE WITH IT. THE LAST TIME IT WAS USED I’M GOING TO GUESS [WAS] ROUGHLY TEN YEARS AGO, MAYBE MORE.” “I DOUBT YOU WOULD FIND ANYONE USING IT, BUT I WOULDN’T BE SURPRISED IF SOMEBODY HAD IT IN THEIR BASEMENT [FOR] THE SAME REASON OURS WAS. JUST OUT OF SIGHT, OUT OF MIND AND YOU’RE JUST GOING ABOUT YOUR DAY–TO-DAY BUSINESS, UNTIL YOU START CLEANING OUT THINGS AND YOU GO, “OH YEAH, THE OLD BBB1.”” “[WE ACQUIRED EQUIPMENT] USUALLY USED. CALGARY WOULD GET THE NEW STUFF AND THEN THE WORKING STUFF THAT THEY WERE REPLACING WOULD COME DOWN TO US, FOR THE MOST PART. THE CAMERAS WE HAVE NOW WERE BOUGHT BRAND NEW, STATE-OF THE-ART, SO THAT WAS NICE. IT IS NICE FOR THAT, BUT THIS WAS PROBABLY PRE-DATED EVEN ME AND I HAVE BEEN HERE TWENTY-EIGHT YEARS. IT WAS PROBABLY THE CAMERA THEY WERE USING, IF NOT AT THE TIME, BUT LIKELY BEFORE I STARTED.” “THIS [CAMERA] FUNCTIONS TODAY. I’M SURE YOU COULD MAKE PICTURES WITH IT, BUT THE USE OF IT WOULD PROBABLY BE, I’M GOING TO GUESS, MAYBE FIVE OR SIX YEARS. THEN [THE] BUDGETS WOULD [GROW], THEY GOT THIS NEW TECHNOLOGY YOU CAN SHOOT UNDER LESS LIGHT. IT’S A LIGHTER CAMERA AND [THEY] HAVE THESE BENEFITS, SO THEY WOULD BUDGET IN TO UPDATE THE CAMERAS AND DECKS. THROUGH THAT CYCLE, THAT IS WHEN WE WOULD PROBABLY GET A COUPLE OF NEW CAMERAS, THE OLDER STUFF WE’D PUT IN THE BASEMENT.” “I’M [NOW] CLEANING OUT OLD EQUIPMENT, BECAUSE IT BUILDS UP AND WE RUN OUT OF ROOM. IT’S SOMETHING HARD TO GET RID OF BECAUSE THEY’RE ALWAYS WORKING AND USUALLY WORKING AND FUNCTIONING FINE, BUT TECHNOLOGY PROGRESSES AND THEY BECOME BIGGER AND BETTER--OR THERE BECOMES BIGGER AND BETTER WAYS OF DOING THE SAME JOB. IT JUST GETS OUTDATED AND HITS THE SHELF. [I] HATE TO SEE IT JUST GET RECYCLED.” “I’M NOT REALLY THAT TYPE OF [NOSTALGIC] PERSON. THE CAMERAS TODAY ARE ALL DIGITAL, THEY GO RIGHT TO A SD CARD IN DIGITAL FORMAT. THERE’S NO MECHANICAL PARTS AND THAT’S PART OF THE REASON I WAS EMPLOYED BECAUSE SO MUCH OF WHAT I DID WAS BECAUSE PARTS WEAR OUT AND NEED TO BE FIXED AND REPLACED, WHERE THE NEW CAMERAS…IT’S NOT MUCH YOU CAN DO IF IT’S IN DIGITAL FORMAT AND [HAS] NO MECHANICAL MOVING PARTS. I DON’T MISS WORKING ON THEM, THAT COULD BE FRUSTRATING BECAUSE A LOT OF TINY LITTLE GEARS AND TIMING…YOU CAN SPEND HOURS AND NOT GET ANYWHERE, AND THEN FINALLY SHIP IT OUT TO THE MANUFACTURER BECAUSE YOU JUST COULDN’T GET ANYWHERE. YOU SPENT A WEEK WORKING ON IT AND NOW YOU’VE GOT TO, IN THE END, PAY SOMEONE TO DO IT. THOSE ARE FRUSTRATIONS, BUT IT IS SATISFYING WHEN YOU DO FIX A PROBLEM AND ARE ABLE TO FIX IT. BUT THOSE DAYS ARE BEHIND US AND I CAN’T SAY I MISS THEM. IT’S JUST DIFFERENT WAYS OF MAINTAINING CAMERAS NOW.” “IT’S HARD TO THROW OUT BECAUSE THE VALUE OF IT IS LIKE BUYING A CAR…AT THAT TIME. THAT’S WHAT YOU’RE DOING IS PUTTING A CAR ON YOUR SHOULDER, MAYBE NOT QUITE A CAR, BUT I’M GOING TO GUESS THIS CAMERA WAS PROBABLY FIFTEEN THOUSAND DOLLARS BACK THEN. THAT’S A LOT OF MONEY.” FOR MORE INFORMATION INCLUDING THE FULL INTERVIEW TRANSCRIPTION, PLEASE SEE THE PERMANENT FILE P20180005000-GA.
Catalogue Number
P20180005000
Acquisition Date
2018-03
Collection
Museum
Images
Less detail
Other Name
CTV AUDIO BOARD/CONSOLE
Date Range From
1985
Date Range To
2014
Material Type
Artifact
Materials
METAL, WOOD, PLASTIC
Catalogue Number
P20160013000
  2 images  
Material Type
Artifact
Other Name
CTV AUDIO BOARD/CONSOLE
Date Range From
1985
Date Range To
2014
Materials
METAL, WOOD, PLASTIC
No. Pieces
2 1
Height
40.5
Length
71.5
Width
44.5
Description
A: AUDIO BOARD. RECTANGULAR SHAPED BASE. MEDIUM BLUE METAL BOTTOM WITH MEDIUM BROWN WOOD AND PLASTIC UPPER PORTION. UPPER PORTION SITS ON A DIAGONAL INCLINE, WITH A SILVER COLOURED METAL STRIP ALONG THE BOTTOM. ABOVE THIS ARE FOUR RECTANGULAR HOLES: TWO LEFT MOST RECTANGLES ARE EMPTY AND REVEAL THE BOARD MODULES BENEATH. THE NEXT TWO RECTANGLES EACH HAVE WHITE BUTTONS IN THEM: FOUR WHITE BUTTONS LABELED BLANK, “START”, “STOP”, “RESET” IN ONE, WITH TWO IN THE NEXT: :”FULL TRK.” AND “HALF TRK.” JUST ABOVE THIS IS A LINE OF EIGHT LARGE CIRCULAR BLACK AND SILVER KNOBS NEAR BOTTOM OF THE CONSOLE. TO THE RIGHT OF THE KNOBS ARE THREE SMALL CIRCULAR SILVER COLOURED KNOBS, LABELED FROM TOP: “HDST”, “FX SEND”, “MONITOR”, AND THEN 10 SMALL SQUARE BUTTONS, LABELED FROM TOP: “CUE”, “CH8”, “CH7”, “CH6”, “CH5”, “CH4”, “CH3”, “CH2”, “CH1”, “PGM”. IMMEDIATELY TO THE RIGHT OF THIS LINE OF BUTTONS IS A LONG RECTANGLE WITH TEXT: “FX SEND SELECT”. ABOVE THE EIGHT LARGE KNOBS IS A STRIP OF SILVER METAL WITH A SERIES OF OFF-WHITE BUTTONS ABOVE. THE STRIP IS LABELED, FROM LEFT TO RIGHT: “CDP”, “RSWR-24”, “CASS”, “MIC 1”, “MIC 2”, “DIGICART”, “FX RTN”, “COMPUTER CH1”, “COMPUTER CH2”, “EDIT B”. JUST ABOVE “EDIT B” IS A COUNTER, WHICH IS PRESENTLY STOPPED AT “666”. AT THE VERY TOP OF THE BOARD, IS A RECTANGULAR SECTION, WHICH IS 63.5CM LONG AND 9.7CM TALL. IN THIS SECTION, THERE ARE TWO SQUARE SPEAKERS ON EITHER END. BELOW THE LEFT SPEAKER IS AN EMBOSSED MAKERS LABEL: “MCCURDY RADIO INDUSTRIES LIMITED.” A VU METER IS IN THE CENTRE. IT’S BACKGROUND HAS YELLOWED, HAS A SCALE IN BLACK AND RED INK. REVERSE IS MOSTLY MEDIUM BLUE METAL, WITH A HINGED UPPER PORTION THAT IS TOPPED IN WOOD. ALONG THE BACK THERE ARE TEN VENTILATION SECTIONS: EACH HAS THREE HORIZONTAL LINES. TOP LEFT CORNER IS A BLACK AND SILVER LABEL: “MCCURDY RADIO INDUSTRIES LIMITED. TORONTO, ONTARIO CANADA. MODEL NO. SS4388A. SERIAL # C505084. 117 V. ___ VA. 60 CPS.” A SHORT, LIGHT GREY CORD WITH A BLUE TIP, COMES OUT OF THE RIGHT SIDE OF THE BACK. TOP RIGHT CORNER IS A SILVER COLOURED METAL CIRCLE, WITH A LIGHT GREEN CENTRE. THE LIGHT GREEN CENTRE HAS THREE HOLES. ABOVE THE HOLES IS A SMALL BUTTON “PUSH”. EMBOSSED IN THE METAL BELOW THE THREE HOLES: “SWITCHCRAFT”. A BLACK POWER CORD COMES OUT OF THE BOTTOM OF THE UNIT. OVERALL GOOD TO VERY GOOD CONDITION. UNIT IS SLIGHTLY DISCOULOURED/STAINED. A FEW SMALL SCRATCHES IN THE SURFACE, ESPECIALLY ON THE TOP WOODEN PORTION. B: A COMB BOUND MANUAL WITH BLUE PLASTIC COVERS. A CUT OUT IN THE FRONT COVER SHOWS THE FRONT PAGE, DISPLAYING THE TITLE “INSTRUCTIONS SS4 388A CFCN COMMUNICATIONS CALGARY ALBERTA 760083C.” THE BLUE FRONT COVER ITSELF READS “MCCURDY RADIO INDUSTRIES LIMITED”, AND “MCCURDY RADIO INDUSTRIES INCORPORATED”, EACH FOLLOWED BY AN ADDRESS. THE BOOK IS DIVIDED BY PALE BLUE DIVIDERS INTO SIX SECTIONS. EACH SECTION IS AN INSTRUCTION MANUAL COMPLETE WITH DIAGRAMS, FOR A COMPONENT OF THE SS4388A, WITH THE FIRST SECTION BEING A MANUAL FOR THE SS4388A AS A WHOLE. AT THE BACK OF THE BOOKLET SIT A NUMBER OF LOOSE PAGES, SOME WITH HOLES FOR THE COMB BINDING, SOME FOLD OUT DIAGRAMS. DIMENSIONS OF MANUAL ARE: LENGTH 25.9 CM; HEIGHT 31.1 CM; WIDTH 25.9. CONDITION: THE PAGES AND DIVIDERS STICKING OUT OF THE BOOK IS BENT AND CURLED, WORN SOFT. THE FRONT COVER IN SPLITTING AT THE BOTTOM CORNERS.
Subjects
TELECOMMUNICATION T&E
Historical Association
BUSINESS
History
THE FOLLOWING INFORMATION COMES FROM AN INTERVIEW WITH DARREN KRONLUND CONDUCTED BY KEVIN MACLEAN IN MAY 2016, BROADCAST TECHNICAL ENGINEER & IT SUPPORT AT CTV IN LETHBRIDGE. DARREN STARTED WORKING FOR CTV IN 1989. AT THAT TIME, THERE WERE FOUR BROADCAST ENGINEERS AND NOW DARREN IS THE ONLY ONE. CTV OFFERED THE CONSOLE TO THE MUSEUM BECAUSE, ACCORDING TO DARREN, “ALTHOUGH IT STILL WORKS AND FUNCTIONS, IT HAS BECOME NOT RELEVANT ANYMORE BECAUSE WE’RE IN A DIGITAL WORLD NOW. THAT’S THE MAIN REASON. IT HASN’T BEEN USED BY US IN, 2016, IN PROBABLY 18 MONTHS - IT’S BEEN USED NOT THAT LONG AGO. IT TOOK US RIGHT THROUGH, AND INCLUDING THE TRANSITION INTO DIGITAL. IT WAS PART OF THAT [TIME], WHERE WE WOULD VOICE THROUGH THE BOARD, WHICH IS IN THE ANALOG WORLD, AND WE PUT SOME EQUIPMENT IN LINE THAT WOULD CONVERT ANALOG TO DIGITAL, AND GET IT INTO OUR COMPUTERS, AND WE COULD E-MAIL IT, SO IT WAS USED EVEN THEN.” THE CONVERSION TO DIGITAL FROM ANALOG STARTED IN THE SPRING OF 2014 AND THE PRIMARY DELAY IN CONVERTING ENTIRELY TO DIGITAL WAS THE COST: “THAT’S A LOT OF MONEY TO GET ALL OF THE EQUIPMENT, ALL AT ONCE, AND MAKE THE SWITCH OVER, AND THEN STILL PUT OUT NEWSCASTS, AND SO THAT WAS JUST FINDING THE RIGHT TIME TO JUMP, AND IT TURNED OUT THAT IT WAS A BUDGET YEAR THAT SOME CAPITAL BECAME AVAILABLE, AND LET’S MAKE THE JUMP. SO, WE WENT OUT AND BOUGHT THE EQUIPMENT, SO THAT WE COULD GATHER IT IN DIGITAL, EDIT IT IN DIGITAL, AND THEN HAVE THE MEANS TO FILE IN DIGITAL. AND THAT WAS ACTUALLY ALL DONE LIKE WITHIN 3 MONTHS. THAT WAS A QUICK LITTLE PROJECT. AND, THIS WAS STILL WORKING. IT JUST FILLED A NEED ALL THROUGH THAT." DARREN RELATED THAT, AT THE TIME OF THE INTERVIEW, CTV WAS “PROBABLY 80% DIGITAL.” FURTHER CONVERSION IS HELD UP DUE TO COST: “IF WE HAD THE MONEY TO DO IT, WE WOULD. WE STILL HAVE SOME VIDEO EQUIPMENT THAT WE ARE USING ANALOG HERE, WHERE IT’S TAKING ABOUT FOUR PIECES OF EQUIPMENT TO ACHIEVE STUFF, BECAUSE WE HAVE TO BRING THE DIGITAL WORLD BACK TO ANALOG. IT’S KIND OF REVERSE, BUT COST-WISE, IT DOESN’T MAKE SENSE TO REPLACE IT WHEN WE HAVE SOMETHING WORKING ALTHOUGH IT’S GOING TO TAKE SOMETHING FAILING IN THAT CHAIN TO MAYBE PROMPT THE … MOVE OVER TO DIGITAL THERE. SO, WE STILL HAVE SOME EQUIPMENT THAT IS IN THE OLD ANALOG WORLD, BUT RIGHT NOW IT HAS GONE SO FAR AS WE ARE CONVERTING DIGITAL TO ANALOG AND IT COMES DOWN TO US MONITORING IT. OUR MONITORING EQUIPMENT IS IN THE ANALOG WORLD.” DARREN EXPLAINED WHY THIS BOARD CONTINUED TO BE USED, DURING THE TRANSITION TO DIGITAL: “EVERYTHING COMES DOWN TO MONEY, AND TO REPLACE IT WITH THE DIGITAL WORLD, AT THE COST, AND WE COULD ACHIEVE IT JUST BY BUYING SOME IN-LINE EQUIPMENT, AND GET THE SAME RESULTS, SO, IT STILL FUNCTIONS AND WORKED, AND DID WHAT WE REQUIRED WHICH WAS TO MIX SIGNALS, OR EVEN JUST TO TAKE A SIGNAL AND GET IT WHERE WE WANTED, WHICH WAS THROUGH THIS OTHER EQUIPMENT, TO DO THE CONVERSION, AND IT JUST WORKED, AND IT DIDN’T MAKE SENSE TO PUT A BUNCH OF MONEY INTO SOMETHING TO REPLACE THE WHOLE CONSOLE WHEN WE DIDN’T NEED TO.” THE BOARD CAME FROM A ROOM CALLED THE AUDIO BOOTH, WHICH IS “USED FOR VOICING. IT’S GOT A SM4, I THINK, MICROPHONE WHICH IS A VERY EXPENSIVE MIC, AND IT’S COMMON THROUGHOUT THE BROADCAST INDUSTRY, AND THE ROOM ITSELF IS ACOUSTICALLY-TREATED SO THAT, YOU KNOW, YOU DON’T WANT NOISE FROM OUTSIDE COMING IN. SO, EVEN THE TELEPHONE HAS A FLASHING LIGHT IF IT’S RINGING. IF YOU NEED TO GET HOLD OF SOMEBODY IN THE AUDIO BOOTH, IT FLASHES. IT’S JUST A ROOM SPECIALLY DESIGNED FOR VOICING.” DARREN EXPLAINED HOW THE CONSOLE ENDED UP AT CTV: “THE MANUAL TELLS ME THAT IT WAS BRAND-NEW IN 1972, AND, I’VE TALKED TO A FEW PEOPLE. THE PEOPLE THAT ORIGINALLY PROBABLY BOUGHT THIS, IT WAS USED UP IN CALGARY FOR A NUMBER OF YEARS, AND I DON’T HAVE THE HISTORY FROM CALGARY. BUT, I’M GOING TO GUESS THAT, SOMEWHERE, PROBABLY, IF IT WAS NEW IN 1972, AND I CAME ONBOARD HERE IN ’89, SO, SOMEWHERE IN THE ‘80’S, PROBABLY MID ‘80’S, I’M GUESSING THAT WE RECEIVED IT, AND PUT IT INTO USE – I’M PRETTY SURE DIRECTLY INTO AN AUDIO BOOTH. THE AUDIO BOOTH MIGHT NOT HAVE BEEN THERE AT THE TIME, BECAUSE, I KNOW, WHEN I CAME, THERE WAS ANOTHER BOARD, VERY SIMILAR TO THIS, THAT WAS IN A CONTROL ROOM, AND IT WAS USED AS PART OF PRODUCTION.” DARREN DOESN’T FIND HIMSELF FEELING VERY NOSTALGIC ABOUT OLD EQUIPMENT: “THE MORE PROBLEMS THEY CREATE, THE LESS ATTACHED I AM TO THEM, (LAUGHS) BECAUSE PART OF MY JOB IS TO KEEP THEM RUNNING. TO TELL YOU THE TRUTH, ACTUALLY I WOULD BE QUITE FOND OF THIS, BECAUSE I RARELY, IN ALL MY YEARS, I CAN’T EVEN REMEMBER, MAYBE 2 OR 3 TIMES, I’VE HAD TO DEAL WITH PROBLEMS WITH IT. SO IT HAS PROBABLY BEEN, IF NOT THE MOST RELIABLE, RIGHT UP THERE. AND, ONE OF THE THINGS I WAS GOING TO MENTION, WITH THESE, THE COMPONENTS ARE ALL DISCRETE. EACH BOARD HAS DISCRETE COMPONENTS, MEANING INDIVIDUAL TRANSISTORS. WHEREAS NOWADAYS BOARDS, THEY HAVE CHIPS AND IC’S, YOU DON’T SEE THAT ON THESE. YOU SEE – YOU’D WORK ON THESE; AND YOU’D LOOK AT A SCHEMATIC, AND YOU WOULD ISOLATE IT RIGHT DOWN TO A RESISTOR, OR A CAPACITOR AND TODAY, YOU CAN’T WORK ON EQUIPMENT. IT’S MORE DISPOSABLE TODAY.” DARREN SEES THIS TRANSITION AS BOTH “GOOD AND BAD. THIS LEVEL OF TROUBLESHOOTING IS REWARDING WHEN YOU ‘GET IT’, BUT IT CAN BE PRETTY FRUSTRATING WHEN YOU ARE JUST KIND OF CHASING YOUR TAIL, WHERE WITH THE NEW STUFF, IT’S MORE BOARD REPLACEMENT, AND IT’S A LOT QUICKER PROCESS. BUT ALSO, THE REASON I SAY IT’S MORE DISPOSABLE, BECAUSE, YOU DON’T SPEND THE TIME ON IT LIKE YOU WOULD HERE, BECAUSE THE TIME THAT IT TAKES AT THIS BOARD, THEY JUST DON’T SUPPLY YOU BOARDS ANYMORE. THEY WOULD SEND LOANERS AND SUPPORT FOR STUFF WAS A LOT BETTER BACK THEN. NOW, IT’S BECOME A DISPOSABLE WORLD. IF YOU DON’T HAVE A CARD, YOU BUY A NEW CARD, AND THAT KIND OF THING. COMPONENTS JUST HAD MORE LONGEVITY. THIS ERA – I STILL HAVE SOME DISTRIBUTION AMPS THAT ARE STILL IN SERVICE AND THEY OUTLIVE STUFF THAT WAS BOUGHT 10 YEARS AFTER THEM. THERE’S A LOT MORE RESILIENCY TO STUFF THAT WAS BUILT THEN.” SEE PERMANENT FILE FOR COPY OF INTERVIEW TRANSCRIPT.
Catalogue Number
P20160013000
Acquisition Date
2016-05
Collection
Museum
Images
Less detail