Skip header and navigation

2 records – page 1 of 1.

Date Range From
1943
Date Range To
1973
Material Type
Artifact
Materials
SHEET METAL, GLASS, CARDBOARD
Catalogue Number
P20160027000
  1 image  
Material Type
Artifact
Date Range From
1943
Date Range To
1973
Materials
SHEET METAL, GLASS, CARDBOARD
No. Pieces
2
Height
13.7
Length
5.4
Width
1.8
Description
A: THERMOMETER. THE THERMOMETER'S CASING IS METAL. THERE IS A COVER ON THE THERMOMTER THAT HAS 17 HOLES PUNCHED OUT OF THE FRONT (7 ROWS ALTERNATING BETWEEN 3 AND 2 HOLES PER ROW). THERE IS A SHORT BACK TO THE COVER. THE COVER IS ATTACHED TO THE THERMOMETER WITH 2 SMALL NAILS ON EITHER SIDE. THE THERMOMETER GLIDES OUT OF THE COVER AND HINGES BACK TO STAND (SUPPORTED BY BACK OF CASE AND THE 2 NAILS). THE BACKGROUND OF THE THERMOMETER IS WHITE AND IS ATTACHED TO THE METAL CASE. “US PAT 2329685” IS ON THE BOTTOM OF THE THERMOMETER. ON THE LEFT SIDE TEMPERATURE MEASUREMENTS FROM 1 TO 6 ARE ETCHED. THE NUMBERS ARE DIVIDED INTO INCREMENTS OF FOUR. ON THE RIGHT SIDE OF THE THERMOMETER THERE ARE “00” ACROSS FROM EACH NUMBER ON THE LEFT. THE THERMOMETER’S GLASS IS TINTED YELLOW WITH A TRANSLUCENT CENTER. THIS TUBE IS 12.4CM IN LENGTH. TWO SMALL METAL RINGS HOLD THE GLASS THERMOMETER TO THE MEASUREMENT BACKING. THERE IS A SMALL METAL HOOK AT THE TOP OF THE THERMOMETER. ON THE RIGHT SIDE OF THE THERMOMETER IN ITS CLOSED POSITION, "D. CARSE" IS HANDWRITTEN IN BLACK INK. GOOD CONDITION. RUSTING/STAINING OVERALL SURFACE. LOSS OF WHITE BACKING BEHIND THE THERMOMETER (SEVERE ON THE UPPER LEFT CORNER AND SLIGHT ON THE UPPER RIGHT CORNER). B: CARDBOARD CASE WITH OVERALL DIMENSIONS OF 13.9 CM X 6 CM X 2 CM. CARDBOARD BOX WITH GREEN LABEL ON FRONT. THE LABEL SAYS “RUXCO” “NO-600-MO-10” “OVEN TEST THERMOMETER RANGE 100 TO 600°F IN 10° DIVISIONS.” GOOD CONDITION. MISSING LEFT END OF BOX. SCRATCH ON THE SURFACE OF THE LEFT SIDE OF THE LABEL. STAINING IN VARIOUS PLACES.
Subjects
FOOD PROCESSING T&E
THERMAL T&E
Historical Association
TRADES
DOMESTIC
History
IN SEPTEMBER 2016, COLLECTIONS TECHNICIAN KEVIN MACLEAN INTERVIEWED IRENE MOCH ABOUT THE HISTORY OF A THERMOMETER SHE DONATED TO THE GALT MUSEUM AND ARCHIVES. THE THERMOMETER BELONGED TO HER FATHER, DAVID ROXBOROUGH CARSE, AND WAS USED BY HIM AS AN EMPLOYEE OF CANADIAN WESTERN NATURAL GAS COMPANY. THE FOLLOWING INFORMATION HAS BEEN EXTRACTED FROM THAT INTERVIEW: “HIS JOB WAS TO GO HOUSE-TO-HOUSE ON SPECIFIED CALLS TO REPAIR AND CHECK GAS APPLIANCES AT VARIOUS HOMES. HE LOVED HIS JOB. IT WAS GREAT PASSION AND HE WOULD SHARE A LOT OF HIS EXPERIENCES AT HOME WITH US. IT BECAME A BIG PART OF OUR FAMILY LIFE. HIS FIRST PASSION WAS HIS FAMILY AND HIS SECOND PASSION WAS HIS WORK. TWENTY- EIGHT YEARS, HE WAS WITH THE GAS COMPANY. HE WOULD BRING VARIOUS LITTLE ITEMS HOME, BUT MOSTLY IT WAS JUST HIS MEMORIES AND OUR MEMORIES OF THE STORIES THAT HE TOLD… MY MOM AND DAD WILLED THEIR HOUSE TO MY HUSBAND, WHO HAD BEEN CARING FOR IT OVER THE YEARS. [THEY] LEFT ALL THEIR TREASURES AS THEY WERE [TO] US BOTH TO DO WHAT WE FELT WAS BEST WITH EVERYTHING. THEY HAVE BEEN GONE SINCE 2000, 2003. SO FINALLY, THIS MOVE HAS FORCED ME TO GO THROUGH SOME OF THE THINGS THAT I HAVE, AND THIS HAS COME UP, AND IT MEANT A LOT. WE ALWAYS HAD GAS STOVE AND GAS RADIANT HEAT AND HE WOULD ALWAYS TEST MY MOTHER’S OVEN WITH THE THERMOMETER TO MAKE SURE THAT IT WAS FUNCTIONING PROPERLY. IT WAS VERY VISIBLE TO ALL OF US. IT WAS VERY IMPORTANT.” MOCH RECALLS THE THERMOMETER IN HER DAD’S WORK TOOLBOX: “… WHEREVER HE WENT, HE WOULD HAVE HIS TOOL BOX, AND THAT WAS THE FIRST THING THAT CAME OUT OF THE TOOL BOX. HE CARRIED IT IN HIS VEHICLE. HE DROVE TO THE HOUSES AND THE FIRST THING THAT CAME OUT OF HIS TOOL BOX WAS THAT.” IT WAS THE JOB AT CANADIAN WESTERN NATURAL GAS COMPANY THAT BROUGHT CARSE AND HIS FAMILY TO LETHBRIDGE: “HE HAD ANDREW’S HARDWARE IN FORT MACLEOD FOR I DON’T KNOW HOW MANY YEARS – QUITE A FEW – AND THEN HE WENT TO THE GAS PLANT IN BURDETT/ BOW ISLAND. AND FAMILY WAS COMING. [HE] NEEDED A STEADY JOB, [SO HE] CAME TO THE CITY [ TO] FIND A STEADY JOB. HE WAS A CERTIFIED PLUMBER AND GAS-FITTER SO HE APPLIED AT THE CANADIAN WESTERN AND NATURAL GAS… THAT WAS HIS WORLD. HE JUST BLOSSOMED. HE WAS A VERY PRIVATE PERSON, BUT HE LOVED TO BE WITH PEOPLE. THERE WAS A LOT OF COMRADERY AND HORSE-PLAY. HE WORKED BY HIMSELF. HE DIDN’T HAVE A PARTNER. AND [HE] WENT PLACE-TO-PLACE – AND IT GREW, AND GREW, AND GREW, AND GREW – 28 YEARS. AND IT WAS NOT UNCOMMON FOR OUR RESIDENCE PHONE AT HOME TO RING FROM VARIOUS PEOPLE, SAYING, ‘DON’T SEND SO-AND-SO; SEND DAVE BACK. DAVE KNOWS WHAT HE’S DONE HERE, AND THAT’S THE PERSON I WANT BACK.’ THAT WAS NOT UNCOMMON AT ALL TO HAPPEN AT OUR HOUSE. HE MADE A GOOD REPUTATION FOR HIMSELF, AND HE LOVED WHAT HE DID, AND IT SHOWED… HE BECAME A KIND OF AN IMAGE AND I THINK HE REVELED IN THAT. HE WAS KING OF HIS WORLD, REALLY. IT WAS VERY NICE.” “… THERE WAS ALWAYS SOMEBODY ON CALL," CONTINUED MOCH, "BUT, IF IT WAS A MAJOR BLIZZARD, OR SOMETHING LIKE THAT, THEN EVERYBODY WAS PRESSED INTO SERVICE. IF IT WAS TURKEY DAY, AND EVERYBODY WANTS TO COOK A TURKEY, AND THE PILOT LIGHT OR THE OVEN DIDN’T WORK, SOMEBODY HAD TO GO. AND THAT WAS THE BIG THING WITH THE GAS COMPANY. GAS COMPANY SERVICEMEN WERE FREE OF CHARGE AND THE ONLY CHARGE WOULD HAVE BEEN FOR A THERMOCOUPLE OR A PART THAT NEEDED TO BE REPLACED. PEOPLE WERE NOT SHY ABOUT CALLING THE GAS COMPANY TO REMEDY THEIR SITUATION. YES, THERE WAS ALWAYS SOMEONE ON CALL, AND HE HAD TO TAKE HIS TURN DOING THAT. BUT, IF THERE WAS A MASS BLIZZARD OR STORM OF SOME SORT, THEN THEY WERE ALL CALLED OUT.” MOCH EXPLAINED THE THERMOMETER WAS OF GREAT IMPORTANCE TO CARSE’S WORK: “MOST OF HIS CALLS WERE [BAKING RELATED]. PEOPLE ALWAYS BAKED IN THOSE DAYS – ALWAYS BAKED AND [IF], ‘THE OVEN WASN’T COOKING RIGHT,’ OR ‘IT WASN’T HOT ENOUGH,’ OR ‘HOW COME THIS FLOPPED?’ ‘WE’D BETTER CALIBRATE THE OVEN PROPERLY.’ AND SO [THEY'D CALL IN], ‘CAN DAVE COME OUT AND CHECK IT OUT AND CHECK THAT OUT FOR US?’ SO YES, THAT [THERMOMETRE] WAS ONE OF THE FIRST THINGS THAT HE BROUGHT OUT… MOM BAKED ALL THE TIME AS WELL, TWICE A WEEK PROBABLY. ON A REGULAR BASIS, HE WOULD JUST DOUBLE CHECK [WITH THE THERMOMETER] TO MAKE SURE THINGS WERE WORKING THE WAY THEY SHOULD. NOT NECESSARILY THAT THERE WAS A PROBLEM, BUT JUST SO THAT THEY STAY THE WAY THEY SHOULD BE. HE EDUCATED US ALL ABOUT THE BLUE FLAME AND HOW THE BLUE FLAME HAD TO HAVE THE LITTLE TIP ON THE END OF THE BLUE FLAME AND THAT MEANS IT’S BURNING CLEAN. IT WAS VERY EDUCATIONAL, TOO.” “[HE] ALWAYS CAME HOME FOR LUNCH. MOM ALWAYS HAD LUNCH READY. WE HAD LUNCH IN THE LIVING ROOM WITH A SANDWICH AND HE HAD A LITTLE SNOOZE. FIVE MINUTES, AND HE WAS OUT THE DOOR. HE WAS NEVER LATE. HE WAS ALWAYS HOME, AND HE WAS NEVER LATE COMING HOME FROM WORK. HE JUST LOVED IT… HE RETIRED IN SEPTEMBER 30, ’73. SO, PROBABLY ’43, ’44 THAT HE CAME TO LETHBRIDGE TO [WORK AT THE] GAS COMPANY.” ACCORDING TO HIS OBITUARY IN THE LETHBRIDGE HERALD, DAVID ROXBOROUGH CARSE PASSED AWAY IN LETHBRIDGE ON 15 NOVEMBER 2000. PLEASE SEE PERMANENT FILE FOR FULL INTERVIEW TRANSCRIPT, LETHBRIDGE HERALD ARTICLES, AND THERMOMETER PATENT.
Catalogue Number
P20160027000
Acquisition Date
2016-09
Collection
Museum
Images
Less detail
Date Range From
1907
Date Range To
1995
Material Type
Artifact
Materials
WOOD, METAL, VARNISH
Catalogue Number
P20160003008
  2 images  
Material Type
Artifact
Date Range From
1907
Date Range To
1995
Materials
WOOD, METAL, VARNISH
No. Pieces
1
Height
107
Diameter
54.5
Description
WOODEN SPINNING WHEEL COATED WITH RED WOOD VARNISH. THE BOBBIN IS APPROX. 11.5CM IN LENGTH AND APPROX. 9CM IN DIAMETER. THERE IS SOME HANDSPUN, WHITE YARN REMAINING ON THE BOBBIN, IN ADDITION TO A SMALL AMOUNT OF GREEN YARN. THE SPINNING WHEEL IS FULLY ASSEMBLED. ON EITHER SIDE OF THE FLYER THERE ARE 10 METAL HOOKS. ON THE LEFT SIDE ONE OF THE 10 HOOKS IS PARTIALLY BROKEN OFF. ON THE FRONT MAIDEN, A WHITE STRING IS TIED AROUND A FRONT KNOB WITH A METAL WIRE BENT LIKE A HOOK (POSSIBLY TO PULL YARN THROUGH THE METAL ORIFICE ATTACHED TO FLYER). LONG SECTION OF RED YARN LOOPED AROUND THE SPINNING WHEEL (MAY BE DRIVE BAND). TREADLE IS TIED TO THE FOOTMAN WITH A DARK GREY, FLAT STRING THAT IS 5MM IN WIDTH. GOOD CONDITION. TREADLE IS WELL WORN WITH VARNISH WORN OFF AND METAL NAIL HEADS EXPOSED.
Subjects
TEXTILEWORKING T&E
Historical Association
DOMESTIC
ETHNOGRAPHIC
History
THE KONKINS WERE A RUSSIAN-SPEAKING FAMILY FROM THE TOWN OF SHOULDICE, ALBERTA, NEAR CALGARY. THEY AND MANY OTHER RUSSIAN FAMILIES COMPOSED THAT TOWN’S DOUKHOBOR COLONY. IT WAS THERE WILLIAM KONKIN MARRIED ELIZABETH WISHLOW. IN 1928, THEIR DAUGHTER, ELSIE WAS BORN. THEY LATER MOVED TO A FARM IN VAUXHALL, ALBERTA. THE PRECEDING AND FOLLOWING INFORMATION HAS BEEN EXTRACTED FROM A TWO-PART INTERVIEW WITH DONOR ELSIE MORRIS, WHICH WAS CONDUCTED BY COLLECTIONS TECHNICIAN KEVIN MACLEAN ON FEBRUARY 17, 2016. ADDITIONAL INFORMATION COMES FROM FAMILY HISTORIES AND TEXTS PROVIDED BY THE DONOR. A FULL HISTORY OF THE KONKIN FAMILY CAN BE FOUND WITH THE RECORD P20160003001. MORRIS ACQUIRED THIS SPINNING WHEEL FROM HER MOTHER AT THE SAME TIME SHE ACQUIRED THE RUG (P20160003006-GA). SHE EXPLAINS: “I ASKED HER IF I COULD USE THE SPINNING WHEEL – SHE TAUGHT ME HOW TO SPIN. AND SHE ALSO TAUGHT ME HOW TO WEAVE, ACTUALLY MY GRANDMOTHER DID THAT MORE SO THAN MY MOTHER. AND I BELONG TO THE WEAVERS’ GUILD, SO I THOUGHT THAT I BETTER DO SOME SPINNING. AND I DID SOME, SO THAT’S WHY I’VE GOT IT HERE AND MOTHER SAID NOT TO BOTHER BRINGING IT BECAUSE SHE WASN’T GOING TO DO ANYMORE SPINNING. SHE HAD LOTS AND LOTS OF YARN THAT SHE DID. SO IT’S BEEN SITTING HERE; IT WAS IN THE BASEMENT.” THE WHEEL WAS MADE FOR ELIZABETH KONKIN WHEN SHE WAS A CHILD IN BRITISH COLUMBIA. MORRIS EXPLAINED THAT: “… [THE SPINNING WHEEL] WAS MADE ESPECIALLY FOR HER. SHE WAS VERY YOUNG. AND THAT IS THE CADILLAC OF SPINNING WHEELS… BECAUSE SHE KNEW WHO THE SPINNERS WERE, WHO THE SPINNING WHEEL CARPENTERS WERE. AND THERE WAS ONE PARTICULAR MAN AND HER MOTHER SAID, ‘WE’LL GO TO THAT ONE.’ AND THEN IN TURN, IN PAYMENT, SHE WOVE HIM ENOUGH MATERIAL TO MAKE A SUIT – A LINEN ONE… [T]HEY DIDN’T LIVE IN CASTELLAR, THEY LIVED IN ANOTHER PLACE. IT’S CALLED - IN RUSSIAN IT IS CALLED OOTISCHENIA. IT’S WHERE THE BIG – ONE OF THE BIG DAMS IS. IF YOU EVER GO ON THAT ROAD, THERE’LL BE DAMS – I THINK ABOUT 3 HUGE ONES… NEAR CASTELLAR, YEAH.” WHEN ASKED ABOUT THE TIME THE WHEEL WAS BUILT FOR HER MOTHER, MORRIS ANSWERED: “… [S]HE GOT IT LONG BEFORE [HER MARRIAGE].” SHE EXPLAINED THAT PRIOR TO MARRYING, GIRLS WOULD PUT TOGETHER TROUSSEAUS “AND THEY MAKE ALL KINDS OF FANCY THINGS WHICH THEY NEVER USE.” MORRIS RECALLS THE SPINNING WHEEL BEING USED WITHIN HER FAMILY’S HOME IN SHOULDICE AND IN THE LEAN-TO AREA IN THEIR HOME AT VAUXHALL: ‘WELL I THINK [THE SKILL IS] IN THE GENES ACTUALLY. BECAUSE MOST FAMILIES WOVE, AND THEY CERTAINLY SPUN, AS FAR AS I REMEMBER. I KNOW EVERY FALL THE LOOM WOULD COME OUT AND WE WERE LIVING WITH MY GRANDPARENTS ON MY DAD’S [SIDE]. WE LIVED UPSTAIRS, AND EVERY WINTER THEY’D HAUL THAT HUGE LOOM INTO THE BATHHOUSE – THE STEAM BATHHOUSE – BECAUSE THERE WAS NO ROOM ANYWHERE ELSE. AND THEY – THE LADIES SET IT UP AND IN THE SUMMERTIME. THEY TORE THE RAGS FOR THE RUGS, OR SPUN THEM. [FOR] WHATEVER THEY WERE GOING TO MAKE. MY MOM WAS SPINNING WHEN I WAS OLD. [S]HE USED MAKE MITTENS AND SOCKS FOR THE KIDS FOR MY CHILDREN AND SO WHEN SHE DIED THERE WAS A WHOLE STACK OF THESE MITTENS AND SOCKS AND I’VE BEEN GIVING IT TO MY GRAND[KIDS AND] MY GREAT GRANDKIDS” MORRIS ALSO USED THIS SPINNING WHEEL MANY TIMES HERSELF. SHE SAID, “IT WAS VERY EASY TO SPIN AND WHEN YOU TRY SOMEBODY ELSE’S SPINNING WHEEL YOU KNOW THE DIFFERENCE RIGHT AWAY. IT’S LIKE DRIVING A CADILLAC AND THEN DRIVING AN OLD FORD. IT’S JUST, IT’S SMOOTH. OUR SON, I TOLD YOU HE WAS VERY CLEVER, HE TRIED SPINNING AND HE SAID IT WAS JUST A VERY, VERY GOOD SPINNING WHEEL. WHEN I WAS IN THE GUILD I TRIED DOING [WHAT] MY MOTHER TAUGHT ME HOW TO SPIN FINE THREAD AND I WANTED HEAVY THREAD BECAUSE NOW [THEY'RE] MAKING THESE WALL HANGINGS. THEY USE THREAD AS THICK AS TWO FINGERS SO I DID THAT AND I DYED IT. I WENT OUT AND CREATED MY OWN DYES. THAT WAS FUN AND THEN I HAVE A SAMPLER OF ALL THE DYES I MADE… I STOPPED SPINNING SHORTLY BEFORE I STOPPED WEAVING… I LOVED WEAVING. FIRST OF ALL I LEARNED HOW TO EMBROIDER. I LIKED THAT THEN I LEARNED HOW CROCHET, I LIKED THAT. THEN I LEARNED HOW TO KNIT AND THAT WAS TOPS. THEN ONE DAY I WAS VISITING MY FRIEND, FRANCES, AND SHE WAS GOING TO THE BOWMAN AND I SAID, 'WHERE ARE YOU GOING?' SHE SAID 'I’M GOING THERE TO WEAVE.' I SAID, 'I DIDN’T KNOW YOU COULD WEAVE?' SHE SAID, 'OH YES,' AND I SAID ‘IS IT HARD?' SHE SAID, ‘NO,” SO I WENT THERE AND I SAW THE THINGS SHE WOVE. THEY WERE BEAUTIFUL AND SO I JOINED THE GROUP AND THEN OF COURSE I WANTED TO HAVE SOME OF THE STUFF I HAD SPUN MYSELF AND DYED MYSELF AND NOBODY ELSE WANTED. THEN I DECIDED, ‘ALRIGHT, I’VE WOVEN ALL THESE THINGS, WOVE MYSELF A SUIT, LONG SKIRT YOU NAME IT. PLACE MATS GALORE. THIS LITTLE RUNNER,’ AND I THOUGHT, ‘WELL, WHAT AM I GOING TO DO WITH THE REST BECAUSE NOBODY WANTS HOMESPUN STUFF. THEY WANT TO GO TO WALMART OR SOME PLACE AND BUY SOMETHING READYMADE,’ SO I GAVE UP SPINNING AND WEAVING… I STOPPED AFTER I MADE MY SUIT. THAT MUST HAVE BEEN ABOUT TWENTY YEARS AGO, EASILY.” MORRIS’ MOTHER WOULD WEAVE IN SHOULDICE, BUT “[I]N VAUXHALL, NO, SHE WASN’T [WEAVING]. SHE DIDN’T HAVE A LOOM.” MORRIS SAID IN SHOULDICE, “I LEARNED HOW TO THROW THE SHUTTLE BACK AND FORTH TO WEAVE RUGS BECAUSE I USED TO SIT THERE WATCHING MY GRANDMOTHER AND SHE LET ME DO THAT, AND THEN YOU SEE WHEN I GOT SO INTERESTED IN WEAVING THAT I BOUGHT A LOOM, SITTING DOWN IN THE BASEMENT. I’VE BEEN TRYING TO SELL IT EVER SINCE AND NOBODY WANTS IT. I OFFERED TO GIVE IT FOR FREE AND NOBODY WANTS IT BECAUSE THEY DON’T HAVE SPACE FOR IT.” PLEASE SEE THE PERMANENT FILE FOR MORE INFORMATION INCLUDING FULL INTERVIEW TRANSCRIPTION, OBITUARIES, PHOTOGRAPHS, AND FAMILY HISTORIES.
Catalogue Number
P20160003008
Acquisition Date
2016-02
Collection
Museum
Images
Less detail