Skip header and navigation

3 records – page 1 of 1.

Other Name
WINDSHIELD COVER
Date Range From
1955
Date Range To
1965
Material Type
Artifact
Materials
COTTON, POLYESTER, INK
Catalogue Number
P20180021005
  2 images  
Material Type
Artifact
Other Name
WINDSHIELD COVER
Date Range From
1955
Date Range To
1965
Materials
COTTON, POLYESTER, INK
No. Pieces
1
Length
174
Width
82
Description
YELLOW COTTON-BLEND COVER WITH MACHINE-STITCHED EDGES; FRONT OF COVER HAS LOGO IN UPPER LEFT CORNER OF WHITE SHIELD WITH RED BORDER, A WHITE ROSE WITH GREEN LEAVES ON YELOW CIRCLE ON SHIELD, AND RED TEXT “WHITE ROSE”. FRONT OF COVER HAS STENCILED GREEN TEXT AT TOP “DRIVE IN-“ AND RED STENCILED TEXT BELOW “LET US CLEAN YOUR WINDSHIELD!” BACK OF COVER IS WHITE COTTON-NYLON FABRIC. FRONT IS STAINED WITH TWO LARGE HOLES ON LEFT AND RIGHT WITH RIPS EXTENDING FROM HOLES; BACK IS STAINED; RIGHT EDGE FRAYED; COVER IS SEVERELY CREASED AND FOLDED. OVERALL GOOD CONDITION.
Subjects
LAND TRANSPORTATION-ACCESSORY
Historical Association
INDUSTRY
TRANSPORTATION
History
ON AUGUST 22, 2018, COLLECTIONS TECHNICIAN KEVIN MACLEAN INTERVIEWED MARG OBERG REGARDING HER DONATION OF AN AUTOMOBILE WINDSHIELD COVER. THE COVER WAS USED BY HER FATHER IN LETHBRIDGE. ON HER FATHER’S USE OF THE COVER, OBERG ELABORATED, “[I REMEMBER] HOW EMBARRASSING IT WAS THAT ALL THE OTHER DADS IN THE NEIGHBORHOOD WOULD JUST GET OUT IN THE MORNING, AND SCRAPE THEIR WINDSHIELD OFF, BUT OUR DAD [JACK GRANT KEYS] HAD THIS BRIGHT YELLOW THING STRAPPED ONTO HIS WINDSHIELD TO KEEP THE SNOW OFF. AS CHILDREN, THE PEER PRESSURE WAS PRETTY INTENSE, AND WE WERE THE ONLY ONES ON THE STREET THAT HAD THIS GREAT BIG CANVAS THING ON THE FRONT OF OUR DAD’S CAR. WHEN WE MOVED TO EDMONTON, WE DIDN’T HAVE A GARAGE AT THAT POINT. AGAIN, THERE GOES THIS (EVEN THOUGH WHITE ROSE GASOLINE HAD BECOME OBSOLETE). MY DAD DIDN’T THROW TOO MANY THINGS OUT IF THEY STILL HAD A USEFUL PURPOSE, AND SO, THERE IT WAS, FRONT AND CENTER AGAIN–-THE ONLY GUY ON THE BLOCK. I DON’T KNOW WHY SOMEBODY DIDN’T COME UP WITH SOMETHING NOT QUITE SO OBVIOUS. IT WAS JUST AN EMBARRASSMENT THAT MY FATHER ALWAYS HAD TO COVER UP HIS WINDSHIELD.” “HE WAS THE MANAGER OF THE [WHITE ROSE OIL COMPANY] PLANT. WELL, HE CALLED IT ‘THE PLANT’, BUT THEY DIDN’T MANUFACTURE ANY PRODUCTS THERE. THERE WERE BIG TANKS. I BELIEVE THEY WERE UP ON THIRD AVENUE SOUTH–-I WANT TO SAY IN THE AREA OF HARLEY-DAVIDSON. WE LIVED ON 18TH STREET, AND I KNOW THAT IT WAS STRAIGHT NORTH ON 18TH STREET, AND EITHER LEFT OR RIGHT. IT WAS IN THAT GENERAL AREA. IT WAS WITHIN WALKING DISTANCE, [AND] HE WAS THE MANAGER OF THE PLANT. I THINK HE WAS EVEN THE ONLY EMPLOYEE, BUT HE USED TO GO AROUND IN SOUTHERN ALBERTA TO ALL OF THE GAS STATIONS THAT WERE DEALING IN WHITE ROSE OIL, AND GET THEIR ORDERS…THEN, THERE MUST HAVE BEEN A DRIVER THAT WOULD COME AND FILL UP THEIR TANKER TRUCKS FROM WHERE HE WAS–-THE BULK STATION–-AND GO AND DELIVER IT. I KNOW THAT [DAD] WAS ON THE ROAD AN AWFUL LOT, BUT I DON’T RECALL, AS A CHILD, THAT THERE WERE OTHER EMPLOYEES, OTHER THAN THE TRUCK DRIVER.” “I DON’T RECALL THAT HE WAS THAT FOND OF HIS JOB. IN THE WINTER-TIME, IT WAS REALLY TOUGH. HE USED TO FREEZE HIS FINGERS, ON OCCASION, BECAUSE HE WAS THE ONE THAT HAD TO CLIMB UP THE STAIRCASE THAT WENT AROUND THESE BIG TANKS IN THE COLD OF WINTER, AND DO A DIP STICK TO MEASURE HOW MUCH FUEL WAS IN THE TANKS. WE DIDN’T HAVE SNOW BLOWERS…IT WAS TOUGH BECAUSE HE DID SPEND SOME TIME OUTSIDE, WITH HIS JOB, AND THEN [HAD] AN AWFUL LOT OF TIME ON THE ROADS. THERE WERE MANY TIMES THAT HE WOULD…BE STRANDED IN SMALL COMMUNITIES, BECAUSE OF BAD ROADS. OF COURSE HE WOULD HAVE PREFERRED TO BE HOME WITH HIS FAMILY. I DON’T RECALL THAT HE WAS REALLY ‘GUNG-HO’. I KNOW THAT SHELL TRIED TO GET HIM TO MOVE TO EDMONTON ON A FEW OCCASIONS, AND HE FLATLY REFUSED…WE MOVED IN ’63, SO IT WOULD HAVE BEEN MY GRANDMOTHER WAS ILL, AND DEALING WITH CANCER, AND IT WAS JUST A VERY INAPPROPRIATE TIME FOR US TO LEAVE. MY MOTHER WAS AN ONLY CHILD, SO THERE WERE NO OTHER FAMILY MEMBERS TO STAY AND LOOK AFTER HER. THEN, FINALLY SHELL SAID, “THIS IS YOUR FINAL CHOICE, AND THERE IS NO OPTION.” I GUESS IT WASN’T A CHOICE–-IT WAS EITHER MOVE, OR LOSE YOUR JOB. IT WAS A MATTER OF PUTTING IN TIME UNTIL HE RETIRED.” “MY DAD PASSED AWAY, AND WE ACQUIRED IT FROM HIS WIDOW…IT’S A SMALL PART OF MY DAD. I DIDN’T HAVE A LOT OF THINGS [FROM HIM]. THIS WAS MY DAD’S THIRD MARRIAGE, WHEN HE PASSED, AND HIS FAMILY/HIS WIFE DISPOSED OF A LOT OF THINGS THAT WE [THE CHILDREN] POSSIBLY WOULD HAVE KEPT. THEY MEANT NOTHING TO HER, BUT THEY WERE LIVING OUT ON SALT SPRING ISLAND AT THE TIME. I WAS LIVING IN REGINA. MY BROTHER LIVED IN CHICAGO, AND MY SISTER LIVED IN CALIFORNIA. NONE OF US REALLY WANTED ‘THINGS’, LIKE FURNITURE, SO IT WAS JUST A LITTLE TRINKET THAT BROUGHT BACK SO MANY MEMORIES, AND IT WENT BACK AS FAR AS LETHBRIDGE.” FOR MORE INFORMATION INCLUDING THE FULL INTERVIEW TRANSCRIPTION, PLEASE SEE THE PERMANENT FILE P20180021001-GA.
Catalogue Number
P20180021005
Acquisition Date
2018-08
Collection
Museum
Images
Less detail
Other Name
ATTIC LADDER
Date Range From
1960
Date Range To
2010
Material Type
Artifact
Materials
METAL, RUBBER
Catalogue Number
P20150010022
  2 images  
Material Type
Artifact
Other Name
ATTIC LADDER
Date Range From
1960
Date Range To
2010
Materials
METAL, RUBBER
No. Pieces
1
Height
314.2
Length
4.9
Width
33.5
Description
ADJUSTABLE LADDER, SIDE RAILS COME TOGETHER TO MAKE THE LADDER MORE COMPACT (LADDER IS ONLY 8.0CM WIDE WHEN THE SIDE RAILS ARE TOGETHER). SILVER COLOURED METAL, WITH ORANGE PAINT, BLACK RUBBER, AND EIGHT RUNGS. ANTI-SLIP SAFETY SHOE ON THE BOTTOM OF BOTH SIDE RAILS. SAFETY SHOE IS BLACK RUBBER ON THE BOTTOM, WITH A PATTERN OF 10 CIRCLES PER SHOE BOTTOM. METAL TEETH ON THE FRONT OF THE SHOE. SHOES ARE ADJUSTABLE, BUT ARE VERY STIFF. BRACE COMES UP FROM THE BOTTOM AND LOCKS TO PREVENT LADDER RAILS FROM COLLAPSING BACK TOGETHER. BOTTOM OF LADDER HAS A 54.5CM SECTION OF BRIGHT ORANGE PAINT AND TOP HAS A 46.0CM SECTION OF BRIGHT ORANGE PAINT. TOP OF ONE RAIL HAS A BLACK RUBBER TOPPER. SMALL BLACK STICKER AT BOTTOM “P1” WITH SEVERAL STICKERS ON THE OPPOSITE RAIL: A ROUGHLY OVAL SHAPED, RED, BLACK, AND SILVER STICKER: “THIS IS A DUO-SAFETY LADDER. DUO-SAFETY LADDER CORP 519 W 9TH AVE. OSHKOSH, WIS.”; THEN A RECTANGULAR RED STICKER WITH WHITE WRITING: “THIS LADDER IS CERTIFIED TO COMPLY WITH N.F.P.A. SPEC 1931-1832; CURRENT EDITION, FOR FIRE DEPARTMENT GROUND LADDERS AND OSHA FIRE LADDER REQUIREMENTS. REFER TO DUO-SAFETY LADDER SAFETY BOOK FOR CARE – USE – MAINTENANCE ON THIS LADDER. DUO-SAFETY LADDER CORP. OSHKOSH, WI 54901”; THEN A WHITE STICKER WITH GOLD WRITING: “10”. THERE IS ALSO A SILVER COLOURED STICKER WITH HANDWRITING ON THIS SAME RAIL, LOCATED BETWEEN THE FIRST AND SECOND RUNGS: “TEST DATE: 25 NOV 2006. LADDER #: ATTIC #18. APPARATUS #: P1. APPARATUS #: P1.” BOTH RAILS HAVE THE FOLLOWING STICKERS, AT ROUGHLY THE MID-POINT OF THE LADDER: RECTANGULAR, WHITE BACKGROUND, BLUE BORDER, BLACK WRITING: “DANGER. FAILURE TO USE, UNDERSTAND, AND FOLLOW PROPER LADDER USAGE INSTRUCTIONS AS MADE AVAILABLE BY DUO-SAFETY LADDER, N.F.P.A., I.S.F.S.I., A.N.S.I., O.S.H.A., ETC. COULD CAUSE SERIOUS INJURY AND/OR DEATH.” RECTANGULAR, WHITE BACKGROUND, BLACK BORDER AND WRITING: “DANGER. WATCH FOR WIRES. THIS LADDER CONDUCTS ELECTRICITY.” RECTANGULAR, YELLOW, WITH BLACK WRITING: CAUTION. SET UP LADDER PROPERLY TO REDUCE SLIP AND OVERHEAD HAZARDS. FOLLOW THESE INSTRUCTIONS. 1. PLACE TOES AGAINST BOTTOM OF LADDER SIDE RAILS. 2. STAND ERECT. 3. EXTEND ARMS STRAIGHT OUT. 4. PALMS OF HANDS SHOULD TOUCH TOP OF RUNG AT SHOULDER LEVEL. OUT -->” STICKER ON THE INSIDE OF FOURTH RUNG FROM THE BOTTOM: WHITE BACKGROUND, BLACK WRITING: “REMOVE LADDER FROM SERVICE AND TEST IF ANY HEAT SENSOR TURNS DARK -->” LADDER IS IN GOOD OVERALL CONDITION. ADJUSTABLE FEET ARE VERY STIFF. LOTS OF SCUFF MARKS ALL OVER LADDER AND SOME STICKERS HAVE BEEN PARTIALLY REMOVED/SCRATCHED.
Subjects
REGULATIVE & PROTECTIVE T&E
Historical Association
SAFETY SERVICES
History
THIS ATTIC LADDER WAS USED BY THE LETHBRIDGE FIRE DEPARTMENT. IN A WRITTEN STATEMENT PROVIDED AT THE TIME OF DONATION, JESSE KURTZ, DEPUTY CHIEF – SUPPORT SERVICES (RETIRED), EXPLAINED THAT THE LADDER WAS “USED TO ACCESS ATTIC SPACES THROUGH SMALL ACCESS HOLES IN CEILINGS. USED WHEN WE DID NOT WANT TO PULL A CEILING DOWN AFTER A FIRE TO ENSURE THAT THE FIRE IN THE ATTIC WAS OUT.” HE CONTINUED SAYING THAT THIS LADDER WAS DECOMMISSIONED BECAUSE IT IS “OLD AND WORN OUT. ALL LADDERS MUST MEET MINIMUM ACCEPTANCE STANDARDS.” IN THE SUMMER OF 2015, COLLECTIONS TECHNICIAN KEVIN MACLEAN, CONDUCTED A SERIES OF INTERVIEWS WITH CURRENT AND FORMER MEMBERS OF THE FIRE DEPARTMENT, INCLUDING: CLIFF “CHARLIE” BROWN (HIRED IN 1966, RETIRED 2004), TREVOR LAZENBY (HIRED IN 1994), AND LAWRENCE DZUREN (HIRED 1959, RETIRED 1992). BROWN EXPLAINED THAT THIS IS “WHAT WE CALL A LITTLE ATTIC LADDER, TO GET BACK INTO A TIGHT PLACE WHERE YOU COULDN’T BRING A BIG LADDER IN … YOU COULD GET IT UP INTO THE ATTIC SO YOU COULD CHECK WHAT WAS IN THE ATTIC.” LAZENBY ELABORATED: “THIS IS A FOLDING ATTIC LADDER … THE RUNGS THAT SEPARATE THE TWO BEAM SECTIONS ARE ACTUALLY HINGED IN NATURE AND SO IT FOLDS UP AND FITS IN, TYPICALLY, A LITTLE COMPARTMENT ON THE BACK END OF THE TRUCK BECAUSE [THEY] HAVE SOME LONG, LATERAL STORAGE THERE. THESE SURPRISINGLY GET USED A FAIR AMOUNT, STILL.” HE CONTINUED SAYING “THEY’RE NARROW ENOUGH THAT THEY’RE ALMOST DIFFICULT TO CLIMB WITH YOUR BIG FIRE BOOTS ON.” LAZENBY EXPLAINED THAT THE LADDERS IN USE PRESENTLY ARE VERY SIMILAR TO THIS MODEL: “YOU CAN TELL BY LOOKING AT IT IT’S AN OLDER PIECE BUT THE CONSTRUCTION IS ESSENTIALLY THE SAME. THEY MIGHT BE USING SLIGHTLY LIGHTER MATERIALS NOW, BUT FROM WHAT I CAN SEE, THEY’RE BASICALLY THE SAME.” HE ADDED THAT HE WAS OFTEN THE ONE USING THE LADDER: “BECAUSE I WAS NEVER ONE OF THE BIGGER GUYS ON THE JOB, AND ESPECIALLY WHEN I STARTED I WAS PROBABLY TWENTY POUNDS LIGHTER THAN I AM NOW, IF THEY NEEDED SOMEONE TO GET INTO A SMALLER SPACE, I WAS THAT GUY, TYPICALLY, BECAUSE WHEN YOU WEIGHT 250 [POUNDS] AND YOU THROW THE SCBA ON AND ALL THE EQUIPMENT, IT’S DEFINITELY TOUGH FOR SOME OF THOSE GUYS TO GET THROUGH THAT ACCESS. SO, YES, I’VE BEEN IN MY FAIR SHARE OF ATTICS AND THAT’S THE ONLY MEANS TO GET UP THERE.” LAZENBY EXPLAINED THE IMPORTANCE OF USING THE LADDER: “ANY TIME A FIRE VENTS OUT OF A WINDOW AND TOUCHES ANY PART OF THE SOFFIT, IT’S INCUMBENT THAT YOU HAVE TO ABSOLUTELY CHECK THAT BECAUSE IF YOU DON’T AND YOU’RE OPERATING UNDERNEATH AN ATTIC FIRE, THAT’S A VERY, VERY UNSAFE PLACE TO BE.” DZUREN ADDED: “THAT’S A COLLAPSIBLE LADDER. IT’S KIND OF LIKE A SCISSOR TYPE OF LADDER. IT WAS VERY COMPACT, YOU COULD STORE IT ON ONE OF YOUR VEHICLES WITHOUT IT TAKING UP TOO MUCH ROOM … YOU’D CARRY THAT INTO YOUR HOUSE IF AN OFFICER WANTED YOU TO GO UP INTO AN ATTIC … IT WAS EASY TO TRANSPORT AND ONCE YOU GOT IT INTO THE OPENING YOU COULD JUST GIVE IT A SWITCH AND IT WOULD OPEN UP AND YOU COULD JUST CLIMB RIGHT UP TO THE SPOT THERE.” SEE PERMANENT FILE FOR FULL INTERVIEW TRANSCRIPTS AND ADDITIONAL INFORMATION ABOUT THE LETHBRIDGE FIRE DEPARTMENT.
Catalogue Number
P20150010022
Acquisition Date
2015-02
Collection
Museum
Images
Less detail
Other Name
HIGH VOLUME FIRE HOSE / PUMP LENGTH HOSE
Date Range From
1965
Date Range To
1985
Material Type
Artifact
Materials
NYLON, BRASS, RUBBER,
Catalogue Number
P20150010021
  2 images  
Material Type
Artifact
Other Name
HIGH VOLUME FIRE HOSE / PUMP LENGTH HOSE
Date Range From
1965
Date Range To
1985
Materials
NYLON, BRASS, RUBBER,
No. Pieces
1
Length
416.0
Width
38.3
Diameter
17.5
Description
SHORT HIGH VOLUME FIRE HOSE, ALSO KNOW AS PONY LENGTH OR PUMP LENGTH FIRE HOSE. SHORT, WIDE, RED FIRE HOSE. COUPLINGS ON EACH END OF HOSE. ON THE LARGER END (17.5CM DIAMETER) THE CHROME PLATED COUPLING HAS 10.4CM LONG HANDLES AND A STRIPE OF GREEN PAINT NEAR THE CONNECTION WITH THE HOSE. THE HOSE HAS BEEN TRIPLE CLAMPED ONTO THE COUPLING. ON THE OTHER END OF THE HOSE, THE DIAMETER IS 14.0CM, AND THE COUPLING HAS HANDLES THAT ARE 4.7CM LONG. THIS END OF THE HOSE IS ALSO TRIPLE CLAMPED ONTO THE COUPLING. ON EACH END OF THE HOSE, TWO OF THE CLAMPS ARE SMALLER AND ARE STAMPED WITH A REPEATING "* DENVER * COLORADO * USA * BAND * IT *" THE LARGEST CLAMPS, EACH FURTHEST FROM ITS RESPECTIVE COUPLING, STAMPED: "DIXON V. & C. CO. USA 525" ON EITHER SIDE OF THE TWO LARGE BOLT SETS. VERY GOOD OVERALL CONDITION. CHROME PLATING HAS WORN AWAY ON EDGES. LOTS OF SCRATCHES AND GOUGES IN THE METAL HANDLES OF THE COUPLINGS.
Subjects
REGULATIVE & PROTECTIVE T&E
Historical Association
SAFETY SERVICES
History
THIS HIGH VOLUME FIRE HOSE WAS USED BY THE LETHBRIDGE FIRE DEPARTMENT. IN A WRITTEN STATEMENT PROVIDED AT THE TIME OF DONATION, JESSE KURTZ, DEPUTY CHIEF – SUPPORT SERVICES (RETIRED), EXPLAINED THAT THIS HOSE WAS USED “WHEN A FIRE ENGINE NEEDED TO CONNECT TO A FIRE HYDRANT AND WAS PARKED RIGHT BESIDE THE HYDRANT. THIS WAS BEFORE WE CARRIED LARGER BUT LIGHTER HOSES ON THE TRUCKS.” IN THE SUMMER OF 2015, COLLECTIONS TECHNICIAN KEVIN MACLEAN, CONDUCTED A SERIES OF INTERVIEWS WITH CURRENT AND FORMER MEMBERS OF THE FIRE DEPARTMENT, INCLUDING: CLIFF “CHARLIE” BROWN (HIRED IN 1966, RETIRED 2004), TREVOR LAZENBY (HIRED IN 1994), AND LAWRENCE DZUREN (HIRED 1959, RETIRED 1992). BROWN EXPLAINED THAT “THIS WAS ONE OF YOUR MAIN PIECES OF EQUIPMENT WHEN YOU WENT TO A FIRE … WE’D HOOK THIS [THE HOSE] TO THE HYDRANT, AND THEN THIS INTO OUR PUMP, SO WE’D BE GETTING 8 INCHES OF WATER INTO OUR PUMP, AND THEN THE PUMP WOULD BOOST THAT LINE, AND WE COULD PUT UP 5 OR 6 LINES … THIS WAS ONLY USED AT LARGE FIRES … WHEN WE HAD TO USE THIS, THERE WAS BIG TROUBLE.” LAZENBY ADDED: “IF THIS WAS IN SERVICE WITH OUR DEPARTMENT, THIS WAS IN SERVICE BEFORE I GOT ON, SO I DON’T KNOW THAT I’VE EVEN EVER ACTUALLY SEEN ONE OF THESE, TO BE HONEST WITH YOU.” DZUREN ELABORATED: “THAT’S WHAT WE WOULD HOOK UP ONTO FROM OUR HYDRANT TO THE PUMP. THE HYDRANT MAN, HE WOULD CONNECT THAT TO THE HYDRANT GATE, TO THE HYDRANT, AND THIS WOULD GO TO THE INPUT SIDE OF THE PUMPER. AND THEN THEY WOULD TURN ON THE WATER WITH THAT NOZZLE AND THEY WOULD SUPPLY WATER TO THE FIRE TRUCK AND HE COULD PUMP IT TO A MULTITUDE OF LINES THAT COME OFF OF THERE.” WHEN ASKED WHY FIREFIGHTERS WOULD WANT TO RUN THE WATER THROUGH THE PUMPER TRUCK, RATHER THAN JUST OFF THE HYDRANT, DZUREN EXPLAINED: “WELL, IF THE HYDRANT PRESSURE IS NOT HIGH ENOUGH TO ACCOMMODATE FIREFIGHTING, LIKE SAY IF OUR HOSE, IF A NOZZLE LIKE THAT, YOU’VE GOT TO HAVE UP TO A HUNDRED POUNDS IN THERE, A HYDRANT NORMALLY DOESN’T HAVE THAT KIND OF HIGH PRESSURE.” SEE PERMANENT FILE FOR FULL INTERVIEW TRANSCRIPTS AND ADDITIONAL INFORMATION ABOUT THE LETHBRIDGE FIRE DEPARTMENT.
Catalogue Number
P20150010021
Acquisition Date
2015-02
Collection
Museum
Images
Less detail